mirror of https://github.com/Desuuuu/klipper.git
464 lines
24 KiB
Markdown
464 lines
24 KiB
Markdown
This document describes the overall code layout and major code flow of
|
|
Klipper.
|
|
|
|
Directory Layout
|
|
================
|
|
|
|
The **src/** directory contains the C source for the micro-controller
|
|
code. The **src/avr/**, **src/sam3/**, **src/samd21/**,
|
|
**src/lpc176x/**, **src/stm32f1/**, **src/pru/**, and **src/linux/**
|
|
directories contain architecture specific micro-controller code. The
|
|
**src/simulator/** contains code stubs that allow the micro-controller
|
|
to be test compiled on other architectures. The **src/generic/**
|
|
directory contains helper code that may be useful across different
|
|
architectures. The build arranges for includes of "board/somefile.h"
|
|
to first look in the current architecture directory (eg,
|
|
src/avr/somefile.h) and then in the generic directory (eg,
|
|
src/generic/somefile.h).
|
|
|
|
The **klippy/** directory contains the host software. Most of the host
|
|
software is written in Python, however the **klippy/chelper/**
|
|
directory contains some C code helpers. The **klippy/kinematics/**
|
|
directory contains the robot kinematics code. The **klippy/extras/**
|
|
directory contains the host code extensible "modules".
|
|
|
|
The **lib/** directory contains external 3rd-party library code that
|
|
is necessary to build some targets.
|
|
|
|
The **config/** directory contains example printer configuration
|
|
files.
|
|
|
|
The **scripts/** directory contains build-time scripts useful for
|
|
compiling the micro-controller code.
|
|
|
|
The **test/** directory contains automated test cases.
|
|
|
|
During compilation, the build may create an **out/** directory. This
|
|
contains temporary build time objects. The final micro-controller
|
|
object that is built is **out/klipper.elf.hex** on AVR and
|
|
**out/klipper.bin** on ARM.
|
|
|
|
Micro-controller code flow
|
|
==========================
|
|
|
|
Execution of the micro-controller code starts in architecture specific
|
|
code (eg, **src/avr/main.c**) which ultimately calls sched_main()
|
|
located in **src/sched.c**. The sched_main() code starts by running
|
|
all functions that have been tagged with the DECL_INIT() macro. It
|
|
then goes on to repeatedly run all functions tagged with the
|
|
DECL_TASK() macro.
|
|
|
|
One of the main task functions is command_dispatch() located in
|
|
**src/command.c**. This function is called from the board specific
|
|
input/output code (eg, **src/avr/serial.c**) and it runs the command
|
|
functions associated with the commands found in the input
|
|
stream. Command functions are declared using the DECL_COMMAND() macro
|
|
(see the [protocol](Protocol.md) document for more information).
|
|
|
|
Task, init, and command functions always run with interrupts enabled
|
|
(however, they can temporarily disable interrupts if needed). These
|
|
functions should never pause, delay, or do any work that lasts more
|
|
than a few micro-seconds. These functions schedule work at specific
|
|
times by scheduling timers.
|
|
|
|
Timer functions are scheduled by calling sched_add_timer() (located in
|
|
**src/sched.c**). The scheduler code will arrange for the given
|
|
function to be called at the requested clock time. Timer interrupts
|
|
are initially handled in an architecture specific interrupt handler
|
|
(eg, **src/avr/timer.c**) which calls sched_timer_dispatch() located
|
|
in **src/sched.c**. The timer interrupt leads to execution of schedule
|
|
timer functions. Timer functions always run with interrupts
|
|
disabled. The timer functions should always complete within a few
|
|
micro-seconds. At completion of the timer event, the function may
|
|
choose to reschedule itself.
|
|
|
|
In the event an error is detected the code can invoke shutdown() (a
|
|
macro which calls sched_shutdown() located in **src/sched.c**).
|
|
Invoking shutdown() causes all functions tagged with the
|
|
DECL_SHUTDOWN() macro to be run. Shutdown functions always run with
|
|
interrupts disabled.
|
|
|
|
Much of the functionality of the micro-controller involves working
|
|
with General-Purpose Input/Output pins (GPIO). In order to abstract
|
|
the low-level architecture specific code from the high-level task
|
|
code, all GPIO events are implemented in architecture specific
|
|
wrappers (eg, **src/avr/gpio.c**). The code is compiled with gcc's
|
|
"-flto -fwhole-program" optimization which does an excellent job of
|
|
inlining functions across compilation units, so most of these tiny
|
|
gpio functions are inlined into their callers, and there is no
|
|
run-time cost to using them.
|
|
|
|
Klippy code overview
|
|
====================
|
|
|
|
The host code (Klippy) is intended to run on a low-cost computer (such
|
|
as a Raspberry Pi) paired with the micro-controller. The code is
|
|
primarily written in Python, however it does use CFFI to implement
|
|
some functionality in C code.
|
|
|
|
Initial execution starts in **klippy/klippy.py**. This reads the
|
|
command-line arguments, opens the printer config file, instantiates
|
|
the main printer objects, and starts the serial connection. The main
|
|
execution of G-code commands is in the process_commands() method in
|
|
**klippy/gcode.py**. This code translates the G-code commands into
|
|
printer object calls, which frequently translate the actions to
|
|
commands to be executed on the micro-controller (as declared via the
|
|
DECL_COMMAND macro in the micro-controller code).
|
|
|
|
There are four threads in the Klippy host code. The main thread
|
|
handles incoming gcode commands. A second thread (which resides
|
|
entirely in the **klippy/chelper/serialqueue.c** C code) handles
|
|
low-level IO with the serial port. The third thread is used to process
|
|
response messages from the micro-controller in the Python code (see
|
|
**klippy/serialhdl.py**). The fourth thread writes debug messages to
|
|
the log (see **klippy/queuelogger.py**) so that the other threads
|
|
never block on log writes.
|
|
|
|
Code flow of a move command
|
|
===========================
|
|
|
|
A typical printer movement starts when a "G1" command is sent to the
|
|
Klippy host and it completes when the corresponding step pulses are
|
|
produced on the micro-controller. This section outlines the code flow
|
|
of a typical move command. The [kinematics](Kinematics.md) document
|
|
provides further information on the mechanics of moves.
|
|
|
|
* Processing for a move command starts in gcode.py. The goal of
|
|
gcode.py is to translate G-code into internal calls. Changes in
|
|
origin (eg, G92), changes in relative vs absolute positions (eg,
|
|
G90), and unit changes (eg, F6000=100mm/s) are handled here. The
|
|
code path for a move is: `process_data() -> process_commands() ->
|
|
cmd_G1()`. Ultimately the ToolHead class is invoked to execute the
|
|
actual request: `cmd_G1() -> ToolHead.move()`
|
|
|
|
* The ToolHead class (in toolhead.py) handles "look-ahead" and tracks
|
|
the timing of printing actions. The codepath for a move is:
|
|
`ToolHead.move() -> MoveQueue.add_move() -> MoveQueue.flush() ->
|
|
Move.set_junction() -> Move.move()`.
|
|
* ToolHead.move() creates a Move() object with the parameters of the
|
|
move (in cartesian space and in units of seconds and millimeters).
|
|
* MoveQueue.add_move() places the move object on the "look-ahead"
|
|
queue.
|
|
* MoveQueue.flush() determines the start and end velocities of each
|
|
move.
|
|
* Move.set_junction() implements the "trapezoid generator" on a
|
|
move. The "trapezoid generator" breaks every move into three parts:
|
|
a constant acceleration phase, followed by a constant velocity
|
|
phase, followed by a constant deceleration phase. Every move
|
|
contains these three phases in this order, but some phases may be of
|
|
zero duration.
|
|
* When Move.move() is called, everything about the move is known -
|
|
its start location, its end location, its acceleration, its
|
|
start/cruising/end velocity, and distance traveled during
|
|
acceleration/cruising/deceleration. All the information is stored in
|
|
the Move() class and is in cartesian space in units of millimeters
|
|
and seconds.
|
|
|
|
The move is then handed off to the kinematics classes: `Move.move()
|
|
-> kin.move()`
|
|
|
|
* The goal of the kinematics classes is to translate the movement in
|
|
cartesian space to movement on each stepper. The kinematics classes
|
|
are located in the klippy/kinematics/ directory. The kinematic class
|
|
is given a chance to audit the move (`ToolHead.move() ->
|
|
kin.check_move()`) before it goes on the look-ahead queue, but once
|
|
the move arrives in *kin*.move() the kinematic class is required to
|
|
handle the move as specified. Note that the extruder is handled in
|
|
its own kinematic class. Since the Move() class specifies the exact
|
|
movement time and since step pulses are sent to the micro-controller
|
|
with specific timing, stepper movements produced by the extruder
|
|
class will be in sync with head movement even though the code is
|
|
kept separate.
|
|
|
|
* Klipper uses an
|
|
[iterative solver](https://en.wikipedia.org/wiki/Root-finding_algorithm)
|
|
to generate the step times for each stepper. For efficiency reasons,
|
|
the stepper pulse times are generated in C code. The code flow is:
|
|
`kin.move() -> MCU_Stepper.step_itersolve() ->
|
|
itersolve_gen_steps()` (in klippy/chelper/itersolve.c). The goal of
|
|
the iterative solver is to find step times given a function that
|
|
calculates a stepper position from a time. This is done by
|
|
repeatedly "guessing" various times until the stepper position
|
|
formula returns the desired position of the next step on the
|
|
stepper. The feedback produced from each guess is used to improve
|
|
future guesses so that the process rapidly converges to the desired
|
|
time. The kinematic stepper position formulas are located in the
|
|
klippy/chelper/ directory (eg, kin_cart.c, kin_corexy.c,
|
|
kin_delta.c, kin_extruder.c).
|
|
|
|
* After the iterative solver calculates the step times they are added
|
|
to an array: `itersolve_gen_steps() -> queue_append()` (in
|
|
klippy/chelper/stepcompress.c). The array (struct
|
|
stepcompress.queue) stores the corresponding micro-controller clock
|
|
counter times for every step. Here the "micro-controller clock
|
|
counter" value directly corresponds to the micro-controller's
|
|
hardware counter - it is relative to when the micro-controller was
|
|
last powered up.
|
|
|
|
* The next major step is to compress the steps: `stepcompress_flush()
|
|
-> compress_bisect_add()` (in klippy/chelper/stepcompress.c). This
|
|
code generates and encodes a series of micro-controller "queue_step"
|
|
commands that correspond to the list of stepper step times built in
|
|
the previous stage. These "queue_step" commands are then queued,
|
|
prioritized, and sent to the micro-controller (via
|
|
stepcompress.c:steppersync and serialqueue.c:serialqueue).
|
|
|
|
* Processing of the queue_step commands on the micro-controller starts
|
|
in src/command.c which parses the command and calls
|
|
`command_queue_step()`. The command_queue_step() code (in
|
|
src/stepper.c) just appends the parameters of each queue_step
|
|
command to a per stepper queue. Under normal operation the
|
|
queue_step command is parsed and queued at least 100ms before the
|
|
time of its first step. Finally, the generation of stepper events is
|
|
done in `stepper_event()`. It's called from the hardware timer
|
|
interrupt at the scheduled time of the first step. The
|
|
stepper_event() code generates a step pulse and then reschedules
|
|
itself to run at the time of the next step pulse for the given
|
|
queue_step parameters. The parameters for each queue_step command
|
|
are "interval", "count", and "add". At a high-level, stepper_event()
|
|
runs the following, 'count' times: `do_step(); next_wake_time =
|
|
last_wake_time + interval; interval += add;`
|
|
|
|
The above may seem like a lot of complexity to execute a
|
|
movement. However, the only really interesting parts are in the
|
|
ToolHead and kinematic classes. It's this part of the code which
|
|
specifies the movements and their timings. The remaining parts of the
|
|
processing is mostly just communication and plumbing.
|
|
|
|
Adding a host module
|
|
====================
|
|
|
|
The Klippy host code has a dynamic module loading capability. If a
|
|
config section named "[my_module]" is found in the printer config file
|
|
then the software will automatically attempt to load the python module
|
|
klippy/extras/my_module.py . This module system is the preferred
|
|
method for adding new functionality to Klipper.
|
|
|
|
The easiest way to add a new module is to use an existing module as a
|
|
reference - see **klippy/extras/servo.py** as an example.
|
|
|
|
The following may also be useful:
|
|
* Execution of the module starts in the module level `load_config()`
|
|
function (for config sections of the form [my_module]) or in
|
|
`load_config_prefix()` (for config sections of the form
|
|
[my_module my_name]). This function is passed a "config" object and
|
|
it must return a new "printer object" associated with the given
|
|
config section.
|
|
* During the process of instantiating a new printer object, the config
|
|
object can be used to read parameters from the given config
|
|
section. This is done using `config.get()`, `config.getfloat()`,
|
|
`config.getint()`, etc. methods. Be sure to read all values from the
|
|
config during the construction of the printer object - if the user
|
|
specifies a config parameter that is not read during this phase then
|
|
it will be assumed it is a typo in the config and an error will be
|
|
raised.
|
|
* Use the `config.get_printer()` method to obtain a reference to the
|
|
main "printer" class. This "printer" class stores references to all
|
|
the "printer objects" that have been instantiated. Use the
|
|
`printer.lookup_object()` method to find references to other printer
|
|
objects. Almost all functionality (even core kinematic modules) are
|
|
encapsulated in one of these printer objects. Note, though, that
|
|
when a new module is instantiated, not all other printer objects
|
|
will have been instantiated. The "gcode" and "pins" modules will
|
|
always be available, but for other modules it is a good idea to
|
|
defer the lookup.
|
|
* Register event handlers using the `printer.register_event_handler()`
|
|
method if the code needs to be called during "events" raised by
|
|
other printer objects. Each event name is a string, and by
|
|
convention it is the name of the main source module that raises the
|
|
event along with a short name for the action that is occurring (eg,
|
|
"klippy:connect"). The parameters passed to each event handler are
|
|
specific to the given event (as are exception handling and execution
|
|
context). Two common startup events are:
|
|
* klippy:connect - This event is generated after all printer objects
|
|
are instantiated. It is commonly used to lookup other printer
|
|
objects, to verify config settings, and to perform an initial
|
|
"handshake" with printer hardware.
|
|
* klippy:ready - This event is generated after all connect handlers
|
|
have completed successfully. It indicates the printer is
|
|
transitioning to a state ready to handle normal operations. Do not
|
|
raise an error in this callback.
|
|
* If there is an error in the user's config, be sure to raise it
|
|
during the `load_config()` or "connect event" phases. Use either
|
|
`raise config.error("my error")` or `raise printer.config_error("my
|
|
error")` to report the error.
|
|
* Use the "pins" module to configure a pin on a micro-controller. This
|
|
is typically done with something similar to
|
|
`printer.lookup_object("pins").setup_pin("pwm",
|
|
config.get("my_pin"))`. The returned object can then be commanded at
|
|
run-time.
|
|
* If the module needs access to system timing or external file
|
|
descriptors then use `printer.get_reactor()` to obtain access to the
|
|
global "event reactor" class. This reactor class allows one to
|
|
schedule timers, wait for input on file descriptors, and to "sleep"
|
|
the host code.
|
|
* Do not use global variables. All state should be stored in the
|
|
printer object returned from the `load_config()` function. This is
|
|
important as otherwise the RESTART command may not perform as
|
|
expected. Also, for similar reasons, if any external files (or
|
|
sockets) are opened then be sure to register a "klippy:disconnect"
|
|
event handler and close them from that callback.
|
|
* Avoid accessing the internal member variables (or calling methods
|
|
that start with an underscore) of other printer objects. Observing
|
|
this convention makes it easier to manage future changes.
|
|
* If submitting the module for inclusion in the main Klipper code, be
|
|
sure to place a copyright notice at the top of the module. See the
|
|
existing modules for the preferred format.
|
|
|
|
Adding new kinematics
|
|
=====================
|
|
|
|
This section provides some tips on adding support to Klipper for
|
|
additional types of printer kinematics. This type of activity requires
|
|
excellent understanding of the math formulas for the target
|
|
kinematics. It also requires software development skills - though one
|
|
should only need to update the host software.
|
|
|
|
Useful steps:
|
|
1. Start by studying the
|
|
"[code flow of a move](#code-flow-of-a-move-command)" section and
|
|
the [Kinematics document](Kinematics.md).
|
|
2. Review the existing kinematic classes in the klippy/kinematics/
|
|
directory. The kinematic classes are tasked with converting a move
|
|
in cartesian coordinates to the movement on each stepper. One
|
|
should be able to copy one of these files as a starting point.
|
|
3. Implement the C stepper kinematic position functions for each
|
|
stepper if they are not already available (see kin_cart.c,
|
|
kin_corexy.c, and kin_delta.c in klippy/chelper/). The function
|
|
should call `move_get_coord()` to convert a given move time (in
|
|
seconds) to a cartesian coordinate (in millimeters), and then
|
|
calculate the desired stepper position (in millimeters) from that
|
|
cartesian coordinate.
|
|
4. Implement the `calc_position()` method in the new kinematics class.
|
|
This method calculates the position of the toolhead in cartesian
|
|
coordinates from the current position of each stepper. It does not
|
|
need to be efficient as it is typically only called during homing
|
|
and probing operations.
|
|
5. Other methods. Implement the `move()`, `check_move()`, `home()`,
|
|
`motor_off()`, `set_position()`, and `get_steppers()` methods.
|
|
These functions are typically used to provide kinematic specific
|
|
checks. However, at the start of development one can use
|
|
boiler-plate code here.
|
|
6. Implement test cases. Create a g-code file with a series of moves
|
|
that can test important cases for the given kinematics. Follow the
|
|
[debugging documentation](Debugging.md) to convert this g-code file
|
|
to micro-controller commands. This is useful to exercise corner
|
|
cases and to check for regressions.
|
|
|
|
Porting to a new micro-controller
|
|
=================================
|
|
|
|
This section provides some tips on porting Klipper's micro-controller
|
|
code to a new architecture. This type of activity requires good
|
|
knowledge of embedded development and hands-on access to the target
|
|
micro-controller.
|
|
|
|
Useful steps:
|
|
1. Start by identifying any 3rd party libraries that will be used
|
|
during the port. Common examples include "CMSIS" wrappers and
|
|
manufacturer "HAL" libraries. All 3rd party code needs to be GNU
|
|
GPLv3 compatible. The 3rd party code should be committed to the
|
|
Klipper lib/ directory. Update the lib/README file with information
|
|
on where and when the library was obtained. It is preferable to
|
|
copy the code into the Klipper repository unchanged, but if any
|
|
changes are required then those changes should be listed explicitly
|
|
in the lib/README file.
|
|
2. Create a new architecture sub-directory in the src/ directory and
|
|
add initial Kconfig and Makefile support. Use the existing
|
|
architectures as a guide. The src/simulator provides a basic
|
|
example of a minimum starting point.
|
|
3. The first main coding task is to bring up communication support to
|
|
the target board. This is the most difficult step in a new port.
|
|
Once basic communication is working, the remaining steps tend to be
|
|
much easier. It is typical to use an RS-232 style serial port
|
|
during initial development as these types of hardware devices are
|
|
generally easier to enable and control. During this phase, make
|
|
liberal use of helper code from the src/generic/ directory (check
|
|
how src/simulator/Makefile includes the generic C code into the
|
|
build). It is also necessary to define timer_read_time() (which
|
|
returns the current system clock) in this phase, but it is not
|
|
necessary to fully support timer irq handling.
|
|
4. Get familiar with the the console.py tool (as described in the
|
|
[debugging document](Debugging.md)) and verify connectivity to the
|
|
micro-controller with it. This tool translates the low-level
|
|
micro-controller communication protocol to a human readable form.
|
|
5. Add support for timer dispatch from hardware interrupts. See
|
|
Klipper
|
|
[commit 970831ee](https://github.com/KevinOConnor/klipper/commit/970831ee0d3b91897196e92270d98b2a3067427f)
|
|
as an example of steps 1-5 done for the LPC176x architecture.
|
|
6. Bring up basic GPIO input and output support. See Klipper
|
|
[commit c78b9076](https://github.com/KevinOConnor/klipper/commit/c78b90767f19c9e8510c3155b89fb7ad64ca3c54)
|
|
as an example of this.
|
|
7. Bring up additional peripherals - for example see Klipper commit
|
|
[65613aed](https://github.com/KevinOConnor/klipper/commit/65613aeddfb9ef86905cb1dade9e773a02ef3c27),
|
|
[c812a40a](https://github.com/KevinOConnor/klipper/commit/c812a40a3782415e454b04bf7bd2158a6f0ec8b5),
|
|
and
|
|
[c381d03a](https://github.com/KevinOConnor/klipper/commit/c381d03aad5c3ee761169b7c7bced519cc14da29).
|
|
8. Create a sample Klipper config file in the config/ directory. Test
|
|
the micro-controller with the main klippy.py program.
|
|
9. Consider adding build test cases in the test/ directory.
|
|
|
|
Time
|
|
====
|
|
|
|
Fundamental to the operation of Klipper is the handling of clocks,
|
|
times, and timestamps. Klipper executes actions on the printer by
|
|
scheduling events to occur in the near future. For example, to turn on
|
|
a fan, the code might schedule a change to a GPIO pin in a 100ms. It
|
|
is rare for the code to attempt to take an instantaneous action. Thus,
|
|
the handling of time within Klipper is critical to correct operation.
|
|
|
|
There are three types of times tracked internally in the Klipper host
|
|
software:
|
|
* System time. The system time uses the system's monotonic clock - it
|
|
is a floating point number stored as seconds and it is (generally)
|
|
relative to when the host computer was last started. System times
|
|
have limited use in the software - they are primarily used when
|
|
interacting with the operating system. Within the host code, system
|
|
times are frequently stored in variables named *eventtime* or
|
|
*curtime*.
|
|
* Print time. The print time is synchronized to the main
|
|
micro-controller clock (the micro-controller defined in the "[mcu]"
|
|
config section). It is a floating point number stored as seconds and
|
|
is relative to when the main mcu was last restarted. It is possible
|
|
to convert from a "print time" to the main micro-controller's
|
|
hardware clock by multiplying the print time by the mcu's statically
|
|
configured frequency rate. The high-level host code uses print times
|
|
to calculate almost all physical actions (eg, head movement, heater
|
|
changes, etc.). Within the host code, print times are generally
|
|
stored in variables named *print_time* or *move_time*.
|
|
* MCU clock. This is the hardware clock counter on each
|
|
micro-controller. It is stored as an integer and its update rate is
|
|
relative to the frequency of the given micro-controller. The host
|
|
software translates its internal times to clocks before transmission
|
|
to the mcu. The mcu code only ever tracks time in clock
|
|
ticks. Within the host code, clock values are tracked as 64bit
|
|
integers, while the mcu code uses 32bit integers. Within the host
|
|
code, clocks are generally stored in variables with names containing
|
|
*clock* or *ticks*.
|
|
|
|
Conversion between the different time formats is primarily implemented
|
|
in the **klippy/clocksync.py** code.
|
|
|
|
Some things to be aware of when reviewing the code:
|
|
* 32bit and 64bit clocks: To reduce bandwidth and to improve
|
|
micro-controller efficiency, clocks on the micro-controller are
|
|
tracked as 32bit integers. When comparing two clocks in the mcu
|
|
code, the `timer_is_before()` function must always be used to ensure
|
|
integer rollovers are handled properly. The host software converts
|
|
32bit clocks to 64bit clocks by appending the high-order bits from
|
|
the last mcu timestamp it has received - no message from the mcu is
|
|
ever more than 2^31 clock ticks in the future or past so this
|
|
conversion is never ambiguous. The host converts from 64bit clocks
|
|
to 32bit clocks by simply truncating the high-order bits. To ensure
|
|
there is no ambiguity in this conversion, the
|
|
**klippy/chelper/serialqueue.c** code will buffer messages until
|
|
they are within 2^31 clock ticks of their target time.
|
|
* Multiple micro-controllers: The host software supports using
|
|
multiple micro-controllers on a single printer. In this case, the
|
|
"MCU clock" of each micro-controller is tracked separately. The
|
|
clocksync.py code handles clock drift between micro-controllers by
|
|
modifying the way it converts from "print time" to "MCU clock". On
|
|
secondary mcus, the mcu frequency that is used in this conversion is
|
|
regularly updated to account for measured drift.
|