mirror of https://github.com/Desuuuu/klipper.git
109 lines
5.0 KiB
Markdown
109 lines
5.0 KiB
Markdown
This document describes the overall code layout and major code flow of
|
|
Klipper.
|
|
|
|
Directory Layout
|
|
================
|
|
|
|
The **src/** directory contains the C source for the micro-controller
|
|
code. The **src/avr/** directory contains specific code for Atmel
|
|
ATmega micro-controllers. The **src/sam3x8e/** directory contains code
|
|
specific to the Arduino Due style ARM micro-controllers. The
|
|
**src/simulator/** contains code stubs that allow the micro-controller
|
|
to be test compiled on other architectures. The **src/generic/**
|
|
directory contains helper code that may be useful across different
|
|
host architectures. The build arranges for includes of
|
|
"board/somefile.h" to first look in the current architecture directory
|
|
(eg, src/avr/somefile.h) and then in the generic directory (eg,
|
|
src/generic/somefile.h).
|
|
|
|
The **klippy/** directory contains the C and Python source for the
|
|
host part of the firmware.
|
|
|
|
The **lib/** directory contains external 3rd-party library code that
|
|
is necessary to build some targets.
|
|
|
|
The **config/** directory contains example printer configuration
|
|
files.
|
|
|
|
The **scripts/** directory contains build-time scripts useful for
|
|
compiling the micro-controller code.
|
|
|
|
During compilation, the build may create an **out/** directory. This
|
|
contains temporary build time objects. The final micro-controller
|
|
object that is built is **out/klipper.elf.hex** on AVR and
|
|
**out/klipper.bin** on ARM.
|
|
|
|
Micro-controller code flow
|
|
==========================
|
|
|
|
Execution of the micro-controller code starts in architecture specific
|
|
code (eg, **src/avr/main.c**) which ultimately calls sched_main()
|
|
located in **src/sched.c**. The sched_main() code starts by running
|
|
all functions that have been tagged with the DECL_INIT() macro. It
|
|
then goes on to repeatedly run all functions tagged with the
|
|
DECL_TASK() macro.
|
|
|
|
One of the main task functions is command_task() located in
|
|
**src/command.c**. This function processes incoming serial commands
|
|
and runs the associated command function for them. Command functions
|
|
are declared using the DECL_COMMAND() macro.
|
|
|
|
Task, init, and command functions always run with interrupts enabled
|
|
(however, they can temporarily disable interrupts if needed). These
|
|
functions should never pause, delay, or do any work that lasts more
|
|
than a few micro-seconds. These functions schedule work at specific
|
|
times by scheduling timers.
|
|
|
|
Timer functions are scheduled by calling sched_timer() (located in
|
|
**src/sched.c**). The scheduler code will arrange for the given
|
|
function to be called at the requested clock time. Timer interrupts
|
|
are initially handled in an architecture specific interrupt handler
|
|
(eg, **src/avr/timer.c**), but this just calls sched_timer_kick()
|
|
located in **src/sched.c**. The timer interrupt leads to execution of
|
|
schedule timer functions. Timer functions always run with interrupts
|
|
disabled. The timer functions should always complete within a few
|
|
micro-seconds. At completion of the timer event, the function may
|
|
choose to reschedule itself.
|
|
|
|
In the event an error is detected the code can invoke shutdown() (a
|
|
macro which calls sched_shutdown() located in **src/sched.c**).
|
|
Invoking shutdown() causes all functions tagged with the
|
|
DECL_SHUTDOWN() macro to be run. Shutdown functions always run with
|
|
interrupts disabled.
|
|
|
|
Much of the functionality of the micro-controller involves working
|
|
with General-Purpose Input/Output pins (GPIO). In order to abstract
|
|
the low-level architecture specific code from the high-level task
|
|
code, all GPIO events are implemented in architectures specific
|
|
wrappers (eg, **src/avr/gpio.c**). The code is compiled with gcc's
|
|
"-flto -fwhole-program" optimization which does an excellent job of
|
|
inlining functions across compilation units, so most of these tiny
|
|
gpio functions are inlined into their callers, and there is no
|
|
run-time cost to using them.
|
|
|
|
Klippy code overview
|
|
====================
|
|
|
|
The host code (Klippy) is intended to run on a low-cost computer (such
|
|
as a Raspberry Pi) paired with the micro-controller. The code is
|
|
primarily written in Python, however it does use CFFI to implement
|
|
some functionality in C code.
|
|
|
|
Initial execution starts in **klippy/klippy.py**. This reads the
|
|
command-line arguments, opens the printer config file, instantiates
|
|
the main printer objects, and starts the serial connection. The main
|
|
execution of gcode commands is in the process_commands() method in
|
|
**klippy/gcode.py**. This code translates the gcode commands into
|
|
printer object calls, which frequently translate the actions to
|
|
commands to be executed on the micro-controller (as declared via the
|
|
DECL_COMMAND macro in the micro-controller code).
|
|
|
|
There are four threads in the Klippy host code. The main thread
|
|
handles incoming gcode commands. A second thread (which resides
|
|
entirely in the **klippy/serialqueue.c** C code) handles low-level IO
|
|
with the serial port. The third thread is used to process response
|
|
messages from the micro-controller in the Python code (see
|
|
**klippy/serialhdl.py**). The fourth thread writes debug messages to
|
|
the log (see **klippy/queuelogger.py**) so that the other threads
|
|
never block on log writes.
|