mirror of https://github.com/Desuuuu/klipper.git
103 lines
5.6 KiB
Markdown
103 lines
5.6 KiB
Markdown
This document contains guidelines for contributing an example Klipper
|
|
configuration to the Klipper github repository (located in the
|
|
[config directory](../config/)).
|
|
|
|
Note that the
|
|
[Klipper Community Discourse server](https://community.klipper3d.org)
|
|
is also a useful resource for finding and sharing config files.
|
|
|
|
# Guidelines
|
|
|
|
1. Select the appropriate config filename prefix.
|
|
1. The `printer` prefix is used for stock printers sold by a
|
|
mainstream manufacturer.
|
|
2. The `generic` prefix is used for a 3d printer board that may be
|
|
used in many different types of printers.
|
|
3. The `kit` prefix is for 3d printers that are assembled according
|
|
to a widely used specification. These "kit" printers are
|
|
generally distinct from normal "printers" in that they are not
|
|
sold by a manufacturer.
|
|
4. The `sample` prefix is used for config "snippets" that one may
|
|
copy-and-paste into the main config file.
|
|
5. The `example` prefix is used to describe printer kinematics.
|
|
This type of config is typically only added along with code for
|
|
a new type of printer kinematics.
|
|
2. Use the appropriate filename suffix. The `printer` config files
|
|
must end in a year followed by `.cfg` (eg, `-2019.cfg`). In this
|
|
case, the year is an approximate year the given printer was
|
|
sold. All example configuration files must end in `.cfg`.
|
|
3. Klipper must be able to start `printer`, `generic`, and `kit`
|
|
example config file without error. These config files should be
|
|
added to the
|
|
[test/klippy/printers.test](../test/klippy/printers.test)
|
|
regression test case. Add new config files to that test case in the
|
|
appropriate section and in alphabetical order within that section.
|
|
4. The example configuration should be for the "stock" configuration
|
|
of the printer. (There are too many "customized" configurations to
|
|
track in the main Klipper repository.) Similarly, we only add
|
|
example config files for printers, kits, and boards that have
|
|
mainstream popularity (eg, there should be at least a 100 of them
|
|
in active use). Consider using the
|
|
[Klipper Community Discourse server](https://community.klipper3d.org)
|
|
for other configs.
|
|
5. Only specify those devices present on the given printer or board.
|
|
Do not specify settings specific to your particular setup.
|
|
1. For `generic` config files, only those devices on the mainboard
|
|
should be described. For example, it would not make sense to add
|
|
a display config section to a "generic" config as there is no
|
|
way to know if the board will be attached to that type of
|
|
display. If the board has a specific hardware port to facilitate
|
|
an optional peripheral (eg, a bltouch port) then one can add a
|
|
"commented out" config section for the given device.
|
|
2. Do not specify `pressure_advance` in an example config, as that
|
|
value is specific to the filament, not the printer hardware.
|
|
Similarly, do not specify `max_extrude_only_velocity` nor
|
|
`max_extrude_only_accel` settings.
|
|
3. Do not specify a config section containing a host path or host
|
|
hardware. For example, do not specify `[virtual_sdcard]` nor
|
|
`[temperature_host]` config sections.
|
|
4. Only define macros that utilize functionality specific to the
|
|
given printer or to define g-codes that are commonly emitted by
|
|
slicers configured for the given printer.
|
|
6. Where possible, it is best to use the same wording, phrasing,
|
|
indentation, and section ordering as the existing config files.
|
|
1. The top of each config file should list the type of
|
|
micro-controller the user should select during "make
|
|
menuconfig". It should also have a reference to
|
|
"docs/Config_Reference.md".
|
|
2. Do not copy the field documentation into the example config
|
|
files. (Doing so creates a maintenance burden as an update to
|
|
the documentation would then require changing it in many
|
|
places.)
|
|
3. Example config files should not contain a "SAVE_CONFIG" section.
|
|
If necessary, copy the relevant fields from the SAVE_CONFIG
|
|
section to the appropriate section in the main config area.
|
|
4. Use `field: value` syntax instead of `field=value`.
|
|
5. When adding an extruder `rotation_distance` it is preferable to
|
|
specify a `gear_ratio` if the extruder has a gearing mechanism.
|
|
We expect the rotation_distance in the example configs to
|
|
correlate with the circumference of the hobbed gear in the
|
|
extruder - it is normally in the range of 20 to 35mm. When
|
|
specifying a `gear_ratio` it is preferable to specify the actual
|
|
gears on the mechanism (eg, prefer `gear_ratio: 80:20` over
|
|
`gear_ratio: 4:1`).
|
|
6. Avoid defining field values that are set to their default
|
|
value. For example, one should not specify `min_extrude_temp:
|
|
170` as that is already the default value.
|
|
7. Where possible, lines should not exceed 80 columns.
|
|
8. Avoid adding attribution or revision messages to the config
|
|
files. (For example, avoid adding lines like "this file was
|
|
created by ...".) Place attribution and change history in the
|
|
git commit message.
|
|
7. Do not use any deprecated features in the example config file. The
|
|
`step_distance` and `pin_map` parameters are deprecated and should
|
|
not be in any example config file.
|
|
8. Do not disable a default safety system in an example config file.
|
|
For example, a config should not specify a custom
|
|
`max_extrude_cross_section`. Do not enable debugging features. For
|
|
example there should not be a `force_move` config section.
|
|
|
|
Example config files are submitted by creating a github "pull
|
|
request". Please also follow the directions in the
|
|
[contributing document](CONTRIBUTING.md).
|