f8c4f90c04
resonance_tester: Resonance testing and input shaper auto-calibration ( #3381 )
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-10-14 20:08:10 -04:00
cef9cc29b8
config: Fixing replicape aliases for thermistors ( #3420 )
...
Fixing alias for thermistors to be on the host rather than the PRU.
Moving the D1W alias from PRU MCU to host MCU.
Signed-off by Jon Charnas <goeland86@gmail.com>
2020-10-11 19:23:46 -04:00
1651b18aea
config: Update generic-bigtreetech-skr-v1.4.cfg ( #3419 )
...
Corrected the diag1_pin numbers. Useful for anyone copying and pasting the lines. Its something really easy to look over and can lead to some hair pulling from the time wasted trying to troubleshoot why the tmc diag pin error from Klipper.
Signed-off-by: Juan Moreno <uncholowapo@gmail.com>
2020-10-11 19:22:23 -04:00
930317fa2a
thermistor: Add support for the board thermistor on the Einsy Rambo
...
Add in support for the "TDK NTCG104LH104JT1" thermistor.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-08 15:25:09 -04:00
d9af6129ea
config: Note TMC drivers specify current in RMS in example-extras.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-10-07 10:56:30 -04:00
0bf0cb5b54
config: Add a generic-creality-v4.2.7.cfg example config
...
Reported by @Feche and @yjh0502 .
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-29 12:00:09 -04:00
08eec0da86
config: Use "restart_method: command" in example stm32f103 ender3 configs
...
Reported by @jasonttech.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-22 11:12:38 -04:00
b8bafcf0ed
sample-macros.cfg: Fix action_respond_info
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2020-09-21 10:58:27 -04:00
3a854cacd1
sample-raspberry-pi.cfg: Fix action_respond_info
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2020-09-21 10:58:27 -04:00
c7ea4b89c9
uc1701: Add x_offset (Used to add horizontal offset on SSD1306/SH1106 displays) ( #3284 )
...
Signed-off-by: RJ Patawaran <rjpatawaran@me.com>
2020-09-09 23:07:40 -04:00
1f5848fc1a
adc_scaled: Add support for Duet2 Maestro "vref monitoring"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-09 22:20:54 -04:00
fc85675145
gcode_button: Add support for analog buttons
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-09 14:21:30 -04:00
3405095f0a
adxl345: Add support for adxl345 accelerometer
...
Add support for taking measurements from an adxl345 accelerometer via
SPI interface.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-09-05 09:11:04 -04:00
9406baf40b
config: fixed update file extension for TronXY X5SA
...
Signed-off-by: Vladimir Serov <me@cab404.ru>
2020-09-04 19:28:48 -04:00
7c5b108531
config: Replicape config updates with pin aliases ( #3269 )
...
Adding board_pins section.
Added linux host MCU board pin aliases for endstops.
Also added a sample filament switch sensor config.
Signed-off-by: Jon Charnas <goeland86@gmail.com>
2020-09-01 11:00:48 -04:00
d0c5802fe2
config: Add printer-creality-ender3pro-2020.cfg to printers.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 21:53:26 -04:00
99251015fa
config: Added example config for Ender 3 Pro with 32-bit Creality 4.2.2 board ( #3264 )
...
From July 2020, Ender 3 Pros came with a 32-bit Creality 4.2.2 board, similar to the Ender 3 V2. Unlike the Ender 3 V2, it comes with the ST7920 LCD screen and HR4988 steppers. Using the config file already in Marlin source, I came up with this klipper config file.
Signed-off-by: Matthias Liffers <m@tthi.as>
2020-08-30 21:49:55 -04:00
12529ef6cd
update_chitu: Rename script and minor changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 13:11:34 -04:00
1d201c3592
config: Minor updates to printer-tronxy-x5sa-v6-2019.cfg
...
Minor changes to default config and add to printers.test.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-30 13:04:40 -04:00
15853da28c
config: Added TronXY X5SA support ( #3265 )
...
Added printer-tronxy-x5sa-v6 config.
Added "chitu" bootloader option to stm32 Kconfig.
Added chitu_crypt.
Signed-off-by: Vladimir Serov <me@cab404.ru>
2020-08-30 12:59:28 -04:00
af43faa3f2
config: Tarantula Pro - Multiple tweaks and description change ( #3230 )
...
The following parameters have been tweaked:
- X endstop position has been set to -2, as per original marlin cofig
- Second Z axis disabled by default (this must be purchased as an
add-on)
The comment at the top of this file has also been modified to describe
the difference between this (old) model and the new (rebranded) Tevo
Tarantula pro.
Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-24 18:23:50 -04:00
bc30414362
config: Add example printer-tevo-tarantula-pro-2020.cfg config ( #3225 )
...
Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 08:35:01 -04:00
d4dab9da5d
config: Add homing order not to Ender 3 config ( #3069 )
...
By homing the y axis before the x axis, the nozzle will not touch the
plastic cover of the bed heater cable.
Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>
2020-08-09 21:12:09 -04:00
04bd48ca9d
adc_temperature: add support for AD597 ( #3164 )
...
The AD597 thermocouple amplifier is used in the Raise3D N2+ (and
possibly others).
Signed-off-by: Bryan Boettcher <bryan.boettcher@gmail.com>
2020-08-09 21:06:43 -04:00
d991b4c83b
menu: Replace menu with new Jinja2 template system ( #2344 )
...
menu.cfg:
- jinja2 template scripting
- new Setup menu
- new Calibration menu
menu:
- redesigned menu code
- jinja2 support
- option to reverse menu up and down directions
- functionality set to support menu injection from other modules
- a new way of defining menu hierarchy
- other adjustments
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2020-08-09 09:29:55 -04:00
efebbb9a2f
tmc5160: diag0 support ( #3159 )
...
Allow for diag0 only hardware to use sensorless homing.
Signed-off-by: Trevor Jones <trevorjones141@gmail.com>
2020-08-09 08:17:51 -04:00
c9e7119a93
fan_generic: Add support for named fans and gcode to control them ( #3054 )
...
Signed-off-by: Pontus Borg <liquidpontus@yahoo.se>
2020-08-07 11:39:44 -04:00
8a69e5d596
config: add sample-bigtreetech-exp-mot.cfg ( #3135 )
...
Signed-off-by: Tonny Møller <tonn0297@gmail.com>
2020-08-06 14:19:37 -04:00
68e9a495dd
config: Minor updates to printer-creality-ender3-v2-2020.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-08-02 16:27:31 -04:00
6030551075
config: Add example configuration for Creality Ender 3 V2 ( #3144 )
...
Includes special serial configuration and flashing instructions for the
Creality V4.2.2 board.
Signed-off-by: John Gross <jmgross@jmgross.dev>
2020-08-01 20:20:48 -04:00
9213646c63
corexz: Add CoreXZ kinematics ( #3129 )
...
Add a CoreXZ kinematics
Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
2020-07-30 12:42:23 -04:00
8ecec4be8e
config: Consolidate description of heater parameters in example.cfg
...
Describe max_delta in [heater] instead of in [heater_bed].
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-25 11:56:21 -04:00
db05938a5f
servo: Set initial value via mcu_servo.setup_start_value()
...
Using the setup_start_value() method avoids the PWM output line
transitioning to an intermediate state prior to setting the initial
value.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-25 11:39:39 -04:00
428a8d4881
servo: Remove servo ENABLE parameter
...
Allow one to disable servos via `SET_SERVO WIDTH=0` instead of using
an explicit ENABLE parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-25 11:39:39 -04:00
3835654116
lm75: Added support for LM75/LM75A I2C connected temperature sensors ( #3101 )
...
Signed-off-by: Boleslaw Ciesielski <combolek@users.noreply.github.com>
2020-07-19 20:18:54 -04:00
b0901daa85
display: Add configuration options for OLED displays ( #3084 )
...
Add user-configurable contrast, vcomh (affects "smearing"), and invert options for SSD1306/SH1106 type OLED displays.
Signed-off-by: James Esau <james_esau@hotmail.com>
2020-07-19 20:18:08 -04:00
0f24406acc
config: Fix printer-creality-ender5-2019.cfg positions flipped
...
The X and Y axes were flipped. Reported by @njilk.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-19 19:46:29 -04:00
1c508c38aa
config: Minor formatting change to example.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-16 13:04:00 -04:00
af981432f0
thermistor: Add in definition for "SliceEngineering 450" thermistor
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-07-11 12:50:58 -04:00
65ade083b2
config: Fix for SKR Mini-e3 v2.0 UART addresses ( #3059 )
...
Y and Z were flipped as per: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/firmware/V2.0/Marlin-2.0.x-SKR-mini-E3-V2.0/Marlin/Configuration_adv.h#L2204-L2212
thanks to Vael#9090 on Discord for pointing this out
Signed-off-by: Paul Greidanus <paul@majestik.org>
2020-07-06 11:40:45 -04:00
4bdc11a8b3
input_shaper: Initial support of input shaping ( #3032 )
...
Input shaping can help to reduce printer vibrations due to resonances
and eliminate or reduce ghosting in prints.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2020-07-05 20:54:38 -04:00
7bc6470082
config: Added some sample glyphs for 128x64 screens ( #3028 )
...
A selection of sample glyphs for use on 128x64 displays.
Signed-off-by: James Wood <james@james-wood.com.au>
2020-07-02 07:37:59 -04:00
541665679e
config: Add printer-creality-ender5plus-2019.cfg example config
...
Reported by @mihaiserban.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-25 12:45:47 -04:00
2ae6c220e3
config: Example configuration for MKS Robin E3D/E3
...
Signed-off-by: Kianusch Sayah Karadji <kianusch@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-25 12:37:10 -04:00
755064177b
config: Add pin hints for probe header in generic-duet2-maestro.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-17 13:23:53 -04:00
b3298d8992
hall_filament_width_sensor: Added width logging ( #2981 )
...
Signed-off-by: Denis Ignatenko deniss979@gmail.com
2020-06-16 13:36:49 -04:00
d47a5eb8b6
config: Update generic-bigtreetech-skr-v1.4.cfg with diag1 pins
...
Reported by @Tomblarom.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-15 16:48:08 -04:00
35bbd989e4
docs: LinuxMCU doc & script ( #2956 )
...
Signed-off-by: Lucio Tarantino <lucio.tarantino@gmail.com>
2020-06-12 20:32:12 -04:00
c630ecf3c7
config: Mention 0/1 is valid for display_glyph data
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-09 09:05:41 -04:00
7713986ae1
display: Make hd44780 glyphs configurable
...
Allow the 20x4 hd44780 screen glyphs to be customizable from the
config file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-06-09 08:09:59 -04:00
Dmitry Butyugin
Jon C
uncholowapo
Kevin O'Connor
Florian Heilmann
rjpatawaran
Vladimir Serov
Matthias Liffers
Oliver Fawcett-Griffiths
Yannic Schröder
Bryan Boettcher
Janar Sööt
Trevor Jones
bondus
Tonny Møller
Jimmacle
Voron
combolek
Iakabos
Paul Greidanus
James
Kianusch Sayah Karadji
Denis Ignatenko
Lucio Tarantino