d3f6dad853
controller_fan: Allow multiple controller_fan sections to be defined
...
It may be necessary to define multiple fans, so allow each config
section to be named.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 13:57:01 -04:00
f145439267
z_tilt: bugfix for final correction of z-offset
...
The z_adjust offset provided to adjust_steppers is calculated given the
steppers adjust exactly according to the given x_adjust/y_adjust. As the
algorithm eliminates an offset that is common to all steppers, this offset
must be taken into account in the final correction.
Signed-off-by: Arne Jansen <arne@die-jansens.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 12:00:35 -04:00
e2af1c1f2a
menu: Set input_max for moving toolhead in menu to same value for all move increments ( #1372 )
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
2019-03-08 14:11:47 -05:00
1b1d3f15d8
probe: Fix PROBE_CALIBRATE command
...
The z_offset calculation should have been calculated from the probe
height to the measured bed position.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 12:34:13 -05:00
eac22df7cb
probe: Catch toolhead.move() exceptions in cmd_PROBE_CALIBRATE()
...
Slightly rework the self._move_position() code and also use it in
PROBE_CALIBRATE.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 12:32:01 -05:00
5c0a2479be
screws_tilt_adjust: Add new screws_tilt_adjust tool ( #1367 )
...
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
2019-03-08 11:47:17 -05:00
563bc37073
tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL
...
Use the field names from the trinamic specification. This makes the
field similar to all the other driver_XXX config options.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 11:25:19 -05:00
9c0cf829ee
tmc2660: Minor indentation fix
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 11:20:32 -05:00
789379e95b
tmc2660: Add INIT_TMC and SET_TMC_FIELD gcodes
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-03-08 11:04:14 -05:00
8e17df5d78
tmc2660: Raise SPI speed to 4 Mhz
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-03-08 11:04:14 -05:00
e96b71a9a3
tmc2660: Use helper functions for register access and simplify TMC2660 parameters
...
sense_resistor is now a mandatory parameter for tmc2660 blocks. Duet2 users should use a value of 0.051
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-03-08 11:04:14 -05:00
4541f16cd9
tmc2660: Add vsense_resistor config parameter
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-03-08 11:04:14 -05:00
975b0dbd84
quad_gantry_level: Fixing logic to use probed Z values correctly ( #1328 )
...
Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
2019-03-08 11:01:49 -05:00
8f37700d23
verify_heater: If the heating_gain check fails, just use max_error check
...
Don't immediately raise an error if the heating_gain check fails.
Instead, just transition to the normal max_error check. This should
make the code less likely to raise an error should the heater have a
slow approach to the target temperature.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 10:55:46 -05:00
f2ca7d5c66
verify_heater: Improve handling of new targets when temperature is dropping
...
Allow the first check_gain_time interval to only require a
heating_gain relative to the lowest observed temperature during that
interval. This makes the code less likely to raise a spurious error
when the heater is enabled while the heater temperature is dropping.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 10:55:46 -05:00
893bb32d01
verify_heater: Only reset the error count if within the hysteresis range
...
Don't reset the error counter if the reported temperature is
significantly above the target temperature. This may help catch cases
where the temperature sensor reports random values.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 10:55:46 -05:00
1731fbbca4
gcode: Change respond_info() to log by default
...
It makes sense to log most respond_info() content, so do that by
default.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-04 13:04:18 -05:00
d62a41b930
manual_stepper: Add support for moves with acceleration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-03 13:38:10 -05:00
946eb6b7ae
atsamd: Add definitions for SAMD21E18 chip
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 19:05:00 -05:00
d57bc79513
atsamd: Use the full micro-controller name for CONFIG_MCU
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 19:03:34 -05:00
027f52087c
gcode: Improve handling of end of input when reading from a debug file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 10:06:44 -05:00
3c79e484d5
filament_switch_sensor: initial implementation of switch based filament runout/insert sensor
...
This implementation includes a BaseSensor class that all underlying sensor implementations should subclass.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-03-01 00:45:51 -05:00
3cd1f9676d
pause_resume: Implement send_pause_command()
...
This allows for pausing from inside a reactor callback.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-03-01 00:45:51 -05:00
c8d7e28a35
atsamd: Add support for programming SERCOM pins
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 00:40:44 -05:00
8617cbcb76
tmc2130: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 00:35:20 -05:00
c039b33f2a
tmc2130: Add support for INIT_TMC command
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 00:24:39 -05:00
5f5d39ef3f
bed_screws: Fix missing import
...
Reported by @JoaoFelipe.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-28 00:30:05 -05:00
264505a1b0
tmc2130: Report write-only registers in DUMP_TMC
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 18:53:18 -05:00
f7d8fde502
tmc2208: Report write-only registers in DUMP_TMC
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 18:49:45 -05:00
1b064b5a5d
tmc2660: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 14:33:17 -05:00
c1670ea336
tsl1401cl_filament_width_sensor: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 14:33:17 -05:00
20040f4a18
quad_gantry_level: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 14:33:17 -05:00
a4a23dee9f
respond: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 14:33:17 -05:00
0b095ddf47
temperature_fan: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 14:33:17 -05:00
f13c5d4cdb
sx1509: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 14:33:17 -05:00
adc4af2fc4
serialqueue: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 14:20:15 -05:00
e4d52a19b8
stepcompress: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 14:20:15 -05:00
2d99a1e802
buttons: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:34:22 -05:00
ef1bf60ab7
hd44780: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:31:47 -05:00
51051478af
st7920: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:31:31 -05:00
d6d23c8415
thermistor: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:29:41 -05:00
9f1d9bf0f4
probe: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:28:55 -05:00
ea1814e017
Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:27:52 -05:00
e504147285
font8x14: Store font as strings instead of as bytearray
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:26:59 -05:00
af882ee0fe
chelper: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:20:57 -05:00
9d8c7ddc1e
pins: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:19:42 -05:00
9be6cf226b
klippy: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:18:43 -05:00
21e45cac64
spi_temperature: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:14:23 -05:00
ee1236805e
toolhead: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:11:12 -05:00
b934313c3d
heater: Wrap code to 80 columns
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:09:24 -05:00
Kevin O'Connor
Arne Jansen
amblidex
Rui Caridade
Florian Heilmann
Voron
Arksine