Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
4,458 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

2307 Commits

Author SHA1 Message Date
Kevin O'Connor b79a51c383 temperature_host: Remove support for deprecated rpi_temperature alias 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-11-02 12:45:11 -04:00
Kevin O'Connor eea0137bf0 stepper: Remove support for deprecated step_distance option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-11-02 12:45:11 -04:00
Kevin O'Connor d23c1b06c6 gcode: Fix Python3 syntax error 
Fix error introduced in d6c3aaad.  Also, go back to only accepting
ascii characters on input.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-31 14:15:32 -04:00
Kevin O'Connor ccee189f99 palette2: Use regular str() types for input on Python2 
Avoid using unicode() types on Python2 as it can lead to subtle
errors.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-31 13:52:31 -04:00
Kevin O'Connor 1dee974aea serialhdl: Use regular str() type for stats on Python2 
Avoid using unicode() types on Python2 as it can lead to subtle
errors.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-31 13:52:31 -04:00
Kevin O'Connor fc5353364a util: Use regular str() type in get_git_version() on Python2 
Avoid using unicode() types on Python2 as it can lead to subtle
errors.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-31 13:52:31 -04:00
Kevin O'Connor 7a6fd1a1aa console: Use regular str() types for commands on Python2 
Avoid using unicode() types on Python2 as it can lead to subtle
errors.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-31 13:52:31 -04:00
Kevin O'Connor d6c3aaad8a gcode: Use regular str() types for g-code commands on Python2 
Avoid using unicode() types on Python2 as it can lead to subtle
errors.

Also, accept utf8 on gcode input (instead of just ascii).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-31 13:51:52 -04:00
Eric Callahan d90c3bc57a idle_timeout: exit the timer if the printer is shutdown 
This resolves an issue where the timer can get stuck
in an attempt to transition from Ready to Idle if
the printer is shutdown.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-10-29 18:39:47 -04:00
Kevin O'Connor cf4bfb1119 tmc: Rename handle_stepper_enable() method to _handle_stepper_enable() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-29 11:56:44 -04:00
Kevin O'Connor 14bdc8e569 stepper: Remove unused _dist_to_time() method 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-29 11:41:59 -04:00
Kevin O'Connor 86fee2d517 tmc: Track requested hold_current so SET_TMC_CURRENT doesn't reduce it 
The code automatically reduces the hold_current so that it is no
greater than the run_current.  However, this could lead to confusing
behavior if one reduced and then increased the run_current via
SET_TMC_CURRENT commands.  To avoid that, this change adds support for
tracking the requested hold_current - thus changes to run_current
don't subtly alter the hold_current.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-27 12:13:38 -04:00
Kevin O'Connor 573fceefeb input_shaper: Fix python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-26 20:01:33 -04:00
Kevin O'Connor b62171f350 input_shaper: Restore shaper_type config option 
The shaper_type config option got removed in commit d5a7a7f0 - restore
that option.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-26 18:06:11 -04:00
Dmitry Butyugin 54e21a7c26 input_shaper: Factored out AxisInputShaper class 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-10-26 16:14:50 -04:00
Dmitry Butyugin d5a7a7f00f input_shaper: Define input shapers in a single place in Python code 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-10-26 16:14:50 -04:00
Eric Callahan ec2116b4f7 temperature_sensor: round reported temps to 2 decimal places 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-10-15 18:01:19 -04:00
Eric Callahan cd58a945e2 temperature_host: round reported temps to 2 decimal places 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-10-15 18:01:19 -04:00
Eric Callahan bf598d0922 lm75: round reported temps to 2 decimal places 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-10-15 18:01:19 -04:00
Eric Callahan 916ef4483a htu21d: round reported temps to 2 decimal places 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-10-15 18:01:19 -04:00
Eric Callahan e65b2593c6 heaters: round reported temps to 2 decimal places 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-10-15 18:01:19 -04:00
Eric Callahan 1153803360 ds18b20: round reported temps to 2 decimal places 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-10-15 18:01:19 -04:00
Eric Callahan c499451ab8 bme280: round reported temps to 2 decimal places 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-10-15 18:01:19 -04:00
Dmitry Butyugin 91466ebd43 adxl345: Renamed decode_samples and fixed/added checks on empty data 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-10-13 11:56:52 -04:00
Philipp Temminghoff 64e4649877
tmc: add current values to get_status() (#4696) 
Signed-off-by: Philipp Temminghoff <philipptemminghoff@gmail.com>
 2021-10-11 12:03:08 -04:00
Kevin O'Connor afd1058af6 delta: Don't limit XY+Z moves to max_z_velocity 
Scale the max_z_velocity limit by the amount of movement in the Z.
This should improve bed_mesh and vase mode prints on delta printers.

Reported by @hywelmartin and @dalegaard.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-11 11:53:00 -04:00
Rufo Sanchez b336a21fe7 button: Support half-stepping encoders 
Adds support for half-stepping encoders (encoders that only emit two
steps per detent, instead of four). Incorporates the feedback from
@susisstrolch's PR: https://github.com/KevinOConnor/klipper/pull/4202
, which was itself built upon a previous PR from @nickbrennan01:
https://github.com/KevinOConnor/klipper/pull/730

Uses the table from the Rotary Arduino library linked in buttons.py:
6b784cca67/Rotary.cpp (L21-L40)

Signed-off-by: Rufo Sanchez <rufo@rufosanchez.com>
 2021-10-11 11:29:53 -04:00
Kevin O'Connor c56c34fa1c configfile: Use Python2's ConfigParser when running on Python2 
The backport of Python3's configparser causes issues when there is
unicode characters in the config file.  To avoid introducing new
errors, go back to using the Python2 version of ConfigParser when
running on Python2.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-09 19:37:48 -04:00
Kevin O'Connor 21d5a34d22 console: Fix Python2 compatibility 
Make sure to import util prior to reactor.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-08 13:00:11 -04:00
Kevin O'Connor 5251bf23f1 configfile: Workaround for non-ascii comments on Python2 
Explicitly specify the comment_prefixes as regular Python2 strings -
otherwise the configparser wont ignore non-ascii characters in
comments.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-08 00:23:31 -04:00
Kevin O'Connor 64cb8d9820 ds18b20: Improve Python3 compatibility 
Reported by @matthewlloyd.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-07 14:47:49 -04:00
Dmitry Butyugin 2822680eb4 adxl345: Expanded invalid adxl345 id message 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-10-06 21:17:56 -04:00
Dmitry Butyugin bd5dc03317 adxl345: Renamed debug commands to fix their parsing by Klipper 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-10-06 21:16:31 -04:00
Kevin O'Connor c7b65f50e3 configfile: Ignore trailing comments starting with a semicolon 
Newer versions of configparser no longer default to ignoring trailing
comments that start with a semicolon.  Add that setting explicitly to
avoid breaking existing config files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-06 14:07:32 -04:00
Kevin O'Connor cc63fd51b2 scripts: Use backport of a recent Python3 configparser on Python2 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-04 15:10:46 -04:00
Kevin O'Connor 41d42a07bf klippy: Add a build import test tool 
Add a test case to verify that every optional module successfully
loads on both Python2 and Python3.  This is intended to catch syntax
and module imports that are not compatible between Python versions.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-04 14:36:08 -04:00
Kevin O'Connor f1747b5118 klippy: Add Python2 module wrappers and use Python3 module naming 
Add wrappers for some common Python modules so that the code can run
on both Python2 and Python3.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-04 14:36:08 -04:00
Kevin O'Connor b8c91914b7 webhooks: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-04 14:36:08 -04:00
Kevin O'Connor adeb869f56 gcode: Convert to Python3 string encoding 
The error checking is not complete in this change - the code should
handle the case where an input string is not valid utf8.

The code will continue to run on Python2 after this change, however
the execution time on Python2 is measurably slower after making this
change.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 21:00:03 -04:00
Kevin O'Connor 8714282570 console: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 19:22:13 -04:00
Kevin O'Connor b3a39bebd4 virtual_sdcard: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 19:22:13 -04:00
Kevin O'Connor 0da3d84a87 configfile: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 19:22:13 -04:00
Kevin O'Connor b859c11378 util: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 19:22:13 -04:00
Kevin O'Connor 2978771ce5 mcu: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 19:22:13 -04:00
Kevin O'Connor fa25986adc reactor: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 19:18:58 -04:00
Kevin O'Connor 0fc52f9496 serialhdl: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 19:12:42 -04:00
Kevin O'Connor de38ef4290 kinematics: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 19:12:30 -04:00
Kevin O'Connor 68b939c756 display: Convert to Python3 string encoding 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-10-01 19:12:21 -04:00
Kevin O'Connor bcbdc983a8 screws_tilt_adjust: Improve Python3 compatibility 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-30 13:14:20 -04:00
Kevin O'Connor 01ab8267a6 hybrid_corexy: Improve Python3 compatibility 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-30 13:10:45 -04:00
Kevin O'Connor af86c5f306 fan: Improve python3 compatibility 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-30 13:10:45 -04:00
Kevin O'Connor 164060ccfe stepper: Make sure to report an error if endstop_pin is not defined 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-29 20:10:57 -04:00
Kevin O'Connor 1eecd412ef motion_report: Fix typo causing error reports to not propagate 
The APIDumpHelper._start() method should propagate errors to its
caller.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-26 12:21:36 -04:00
Kevin O'Connor 46167cae67 configfile: Add support for reporting deprecated options 
Add a new printer.configfile.warnings with a list of config features
that are deprecated.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-16 13:44:54 -04:00
Kevin O'Connor c89db2480d configfile: Setup get_status() results after check_unused_options() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-16 13:44:54 -04:00
Kevin O'Connor c84956befe heaters: Change default smooth_time from 2 seconds to 1 second 
A larger smooth_time results in a slower reaction time for the PID.
This increased delay can cause temperature oscillations with high
power heaters.  Many boards produce good results without any
smoothing.  So, it seems a smooth_time of 1 second is a better
default.

Reported by @ReXT3D.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-03 18:11:05 -04:00
github@matthewlloyd.net 830c80a88a tuning_tower: Add STEP_DELTA and STEP_HEIGHT parameters as alternate tuning tower syntax 
Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
 2021-09-02 12:05:31 -04:00
github@matthewlloyd.net 286cc1becc tuning_tower: Add SKIP parameter 
Signed-off-by: Matthew Lloyd <github@matthewlloyd.net>
 2021-09-02 12:05:31 -04:00
Kevin O'Connor d7b04aa18f delta: Make the 'arm_length' description more clear in save_state() 
Reported by @conlank.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-09-02 11:46:33 -04:00
Stefan Dej 3a497d04ac
toolhead: change SET_VELOCITY_LIMIT respond (fixed) (#4620) 
Returns only the current values if no new ones have been passed.

Signed-off-by: Stefan Dej <meteyou@gmail.com>
 2021-08-31 13:37:48 -04:00
Lasse Dalegaard caec91b149 stepper: detect duplicate endstops 
When adding steppers to a `PrinterRail`, detect duplicated `endstop_pin`
settings and add them to the already-registered endstop.

Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
 2021-08-31 13:23:04 -04:00
Kevin O'Connor dcf8cb82a3 tmc: Fix typo in get_status() 
Fix missing variable assignement introduced in commit 5fd1c985.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 14:17:42 -04:00
Kevin O'Connor 0b4fbc78a8 adxl345: Allow multiple simultaneous clients 
It is now possible to have multiple tools gathering adxl345 data at
the same time.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:26:39 -04:00
Kevin O'Connor 404b64fd62 adxl345: Change default chip name from "default" to "adxl345" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:26:36 -04:00
Kevin O'Connor 22167f9510 adxl345: Compress each sample from 6 bytes to 5 bytes 
Transmit data from mcu to host using 5 bytes per sample and up to 10
samples per message block.  This improves bandwidth efficiency.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:25:50 -04:00
Kevin O'Connor e34137582d adxl345: Implement timing via new adxl345_status messages 
Query the adxl345 message counter every 100ms so that accurate timing
can be obtained during measurements.  This allows the adxl345 data to
be exported with timestamps while captures are running.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:25:50 -04:00
Kevin O'Connor dd95f80d9d adxl345: Support querying accelerometer data from webhooks interface 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:25:50 -04:00
Kevin O'Connor d87f7a77c3 adxl345: Add new start_internal_client() function and use in callers 
Introduce a new start_internal_client() function and change all client
code to use that instead of manually calling start_measurements() and
finish_measurements().

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:25:50 -04:00
Kevin O'Connor 8cfaed441d adxl345: Always initialize device on start_measurements() call 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:25:50 -04:00
Kevin O'Connor e03e0e9dac adxl345: Move g-code commands to new helper class 
Separate out the G-Code command handlers to a new ADXLCommandHelper()
class.  This helps separate the sensing code from the user interface
code.

Deprecate the RATE parameter of the ACCELEROMETER_MEASURE command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:25:45 -04:00
Kevin O'Connor 6999ff6256 motion_report: Add helper tool for internal subscribers of data 
Add support for internal clients to "subscribe" to data like external
clients.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:12:11 -04:00
Kevin O'Connor 5fd1c9853d tmc: Add support for a get_status() method 
Export mcu_phase_offset and drv_status information.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-30 12:00:46 -04:00
Kevin O'Connor 950477849d mcu: Support multi-mcu homing 
Support endstops and probes attached to a different micro-controller
than their associated steppers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-28 16:08:57 -04:00
Kevin O'Connor 2e131497ca homing: Fix error in retract move causing "must home axis" errors 
It's possible for the original homing move of an axis to alter the
position of other axes.  Make sure those other axes are not requested
to move on a subsequent second home retract move, as that could cause
an error if those other axes have not been homed.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-28 15:45:11 -04:00
Kevin O'Connor 8d4d16d51a manual_stepper: Add missing calc_position() wrapper call 
Commit 3814a132 added code to homing.py to call calc_position() - add
that function to manual_stepper.py .

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-26 12:23:12 -04:00
Kevin O'Connor 84ac5b0146 configfile: Support config.getchoice() with integer keys 
If the choice mapping uses integer keys then lookup the config option
using self.getint().  This simplifies the callers and improves the
encoding of the printer.configfile.settings export.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-25 10:36:45 -04:00
Kevin O'Connor 75183bfb86 Revert "toolhead: change SET_VELOCITY_LIMIT respond behavior" 
This reverts commit 9f75e348b0.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-24 12:34:00 -04:00
stefand 9f75e348b0 toolhead: change SET_VELOCITY_LIMIT respond behavior 
Returns only the current values if no new ones have been passed.

Signed-off-by: Stefan Dej <meteyou@gmail.com>
 2021-08-24 10:49:31 -04:00
Kevin O'Connor 2fdd8a420d motion_report: Add support for dumping steps/trapq via API server 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-22 11:10:19 -04:00
Kevin O'Connor cf2e941aec webhooks: Add register_mux_endpoint() helper function 
Add ability to register an endpoint that invokes a handler based on a
parameter in the request.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-22 11:10:19 -04:00
Kevin O'Connor 809f1ccea6 stepper: Add mcu_to_commanded_position() method 
Convert stepper.get_past_commanded_position() to the more general
stepper.mcu_to_commanded_position().

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-22 11:10:19 -04:00
Kevin O'Connor f2d10b5729 tmc: Use config.getint() when reading microstep setting 
Don't use config.getchoice() as that results in a string reported by
printer.configfile.settings.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-22 10:50:18 -04:00
Kevin O'Connor e5d5c25154 bed_mesh: Use config lists 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor fe1b2f5124 tmc_uart: Use config.getlist() for select_pins config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 31564f3b43 static_digital_output: Use config.getlist() for pins config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 92e1821423 multi_pin: Use config.getlist() for pins config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor e784c19a96 duplicate_pin_override: Use config.getlist() for pins config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 8f7eedd95e board_pins: Use config list helpers 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 8a59de9431 z_tilt: Use config.getlists() for z_positions config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor d0e4b03739 safe_z_home: Use config.getfloatlist() for home_xy_position config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor d82dc1e844 resonance_tester: Use config.getlists() for probe_points config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 2461b30a6a quad_gantry_level: Use config.getlists() for gantry_corners config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 8a556f2581 homing_heaters: Use config.getlist() for heaters and steppers config options 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 65fb494e77 heater_fan: Use config.getlist() for heater config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 8f85786b3f gcode_button: Use config.getfloatlist() for analog_range config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 7f82dcb442 endstop_phase: Use config.getintlist() for trigger_phase config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 58dedb6b16 menu_keys: Use config.getfloatlist() for analog_range_ config options 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor ab023bb61d delta_calibrate: Use config.getfloatlist() for parsing "stable positions" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor 99b0cacf3b controller_fan: Use config.getlist() for heater and stepper config parameters 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:11 -04:00
Kevin O'Connor d3484efe73 probe: Use config.getlists() for points config option 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-08-21 18:08:10 -04:00