Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
3,778 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

3778 Commits

Author SHA1 Message Date
Kevin O'Connor c5f1835bec config: Add printer-flashforge-creator-pro-2018.cfg to test cases 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-16 13:58:24 -04:00
le-Bark 47f2899e37
config: Config for the flashforge-creator-pro (#4156) 
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
 2021-04-16 13:55:42 -04:00
Kevin O'Connor ca1d431653 stepper: Register a config default for calculated homing_positive_dir 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-16 11:42:39 -04:00
Kevin O'Connor dcf6d30aba config: Updates to printer-tronxy-x5sa-pro-2020.cfg 
Minor updates to use default values.

Also, add to printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-16 00:16:09 -04:00
TheBugLebowsky f6cb1d0450
config: Create printer-tronxy-x5sa-pro-2020.cfg (#4144) 
A working configuration example for Tronxy X5SA Pro printer (https://tronxy.com/x5s-series/x5sa-pro.html) with no Touchscreen funcionalities because separated LCD firmware needed.
Silent TMC2225 drivers soldered on board.
The Self-levelling plate sensor is a blue Tronxy XY-08N model.
Direct Drive is a Titan Extruder Clone "3:1" gear ratio.

Signed-off-by: Morgan Barresi <morganfw@gmail.com>
 2021-04-16 00:12:03 -04:00
Clifford Roche 3a023d0ff4
palette2: Fix get_status (#4171) 
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
 2021-04-15 13:53:06 -04:00
Clifford Roche e7b0e7b43b
palette2: Add ping variation + ping status reports (#4114) 
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
 2021-04-14 11:37:24 -04:00
Kevin O'Connor 316b49c6bf docs: Note that attribution/history should be avoiding in Example_Configs.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-13 21:14:46 -04:00
Kevin O'Connor de8eb884b4 test: Add generic-bigtreetech-skr-2.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-13 21:08:24 -04:00
popshansen b8186ac4cf
config: Add example generic-bigtreetech-skr-2.cfg config (#4160) 
Signed-off-by: Lars R. Hansen <popshansen@hotmail.com>
 2021-04-13 21:06:16 -04:00
Kevin O'Connor dce9971aa9 stepcompress: Improve numerical stability of step+dir+step filter 
Apply the step+dir+step filter even if, for some reason, a negative
time is found.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-11 12:19:57 -04:00
Arksine a93d09cdf4 docs: document bed mesh "faulty_regions" 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-04-10 11:16:07 -04:00
Arksine 60372fd0cf bed_mesh: introduce "faulty_regions" option 
Users may define "faulty regions", locations within the mesh where a probed value is unreliable. When bed mesh generates points it will substitute points in faulty regions with up to 4 points nearest to the region. After calibration is complete the Z values at these points will be averaged and assigned to the original value inside the faulty region.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2021-04-10 11:16:07 -04:00
Arksine 5f5dfbaa7f bed_mesh: Allow user to clear the relative_reference_index via gcode 
If a negative number is specified for the RELATIVE_REFERENCE_INDEX parameter clear the internal relative_reference_index.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-04-10 11:16:07 -04:00
Kevin O'Connor 38b2805136 toolhead: Export the print_stalls value via get_status() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-09 20:44:27 -04:00
Kevin O'Connor 49a2b0354f statistics: Export the OS and process load in a get_status() method 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-09 20:27:38 -04:00
Kevin O'Connor cacf1197b6 docs: Minor changs to pca9533 in Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-09 17:50:30 -04:00
le-Bark eb4abdd830
pca9533: RGB support for the mightyboard (#4150) 
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
 2021-04-09 17:47:16 -04:00
Kevin O'Connor b1b2488538 docs: Minor display sectoin updates to Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-09 13:07:40 -04:00
Kevin O'Connor cf0c165361 Docs: Split the display section of Config_Reference.md into multiple sections 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-09 12:59:13 -04:00
Kevin O'Connor 26603e8369 docs: Minor copy-and-paste fix to Config_Reference.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-09 12:02:18 -04:00
le-Bark 317402d5ba
hd44780_spi: added lcd support to the mightyboard (#4121) 
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
 2021-04-07 21:07:23 -04:00
Dmitry Butyugin 165d2fc228 resonance_tester: Fixed multi-point resonance testing 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-04-07 19:05:23 -04:00
Demetrius Apostolopoulos bf01d6d1f8
config: Added config for Eryone Thinker Series (#4096) 
Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
 2021-04-07 14:10:59 -04:00
Kevin O'Connor c59da22707 docs: Add link to Discourse server in Example_Configs.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-07 13:30:29 -04:00
Oliver 41999eb94d stm32: CAN Kconfig typo 
Fixed simple typo in the Kconfig and can.c. stm32f4 CAN Pins

Signed-off-by: Oliver Walter <oli1111@web.de>
 2021-04-07 13:06:13 -04:00
Arksine 689c2f9baf stm32f1: reset peripherals in enable_pcclock() 
Some bootloaders do not disable peripherals in use before jumping to the application.  Reset peripherals to assure correct operation.

SIgned-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-04-07 12:57:21 -04:00
Kevin O'Connor 5729109727 stale-issue-bot: Increase stale warning from 3 weeks to 5 weeks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-07 11:08:14 -04:00
Kevin O'Connor b5b2fe2d2b bed_mesh: Perform initialization from klippy:connect instead of klippy:ready 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-02 13:50:38 -04:00
Kevin O'Connor 3cfc42e54a bltouch: Minor indentation change 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-02 13:43:01 -04:00
Kevin O'Connor 2a9a133f36 bltouch: Raise the probe as soon as the endstop triggers 
Start the raise sequence once the endstop notification arrives.  This
can reduce the response time as it does not require waiting for the
homing sequence to fully finalize.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-02 13:43:01 -04:00
Kevin O'Connor c9ae89e142 bltouch: Use hmove.check_no_movement() to verify bltouch deployed 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-02 13:43:01 -04:00
Kevin O'Connor cdaf9379b0 pause_resume: Perform setup via "klippy:connect" instead of "klippy:ready" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-01 10:10:39 -04:00
Arksine 74d527776e bed_mesh: lookup the toolhead object in "handle_connect" 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2021-04-01 09:32:23 -04:00
Kevin O'Connor d609753a6a gcode_move: Make sure to call reset_last_position() in _handle_ready() 
If reset_last_position() is invoked prior to the printer being
"ready", then the transform may not be properly accounted for.  Handle
this by calling reset_last_position() when the printer becomes
"ready".

This should fix some "must home first" errors on extrude-only moves.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-31 22:15:54 -04:00
Kevin O'Connor 3390088d3a skew_correction: Register during "connect" phase instead of "ready" phase 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-31 22:13:36 -04:00
Kevin O'Connor 20245d2e46 rotary_delta: Fix typo in get_status() homed_axes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 23:05:34 -04:00
Kevin O'Connor 58a0eb76c5 homing: Pass the HomingMove class to homing_move_begin/end events 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 21:20:57 -04:00
Kevin O'Connor 37a263c0b9 homing: Move homing logic from manual_stepper.py to homing.py 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 21:20:57 -04:00
Kevin O'Connor 38719c1359 homing: Extract out movement verification to new check_no_movement() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 21:17:53 -04:00
Kevin O'Connor d39f849203 homing: Separate homing/probing movement logic to its own class 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 21:17:53 -04:00
Kevin O'Connor 5002dda37c homing: Move home_axes() into cmd_G28() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 21:17:53 -04:00
Kevin O'Connor df56c723b9 homing: Minor simplification of verify_movement tracking 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 21:17:53 -04:00
Kevin O'Connor 862d3f9633 homing: Move low-level probing logic from probe.py to homing.py 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 21:17:53 -04:00
Kevin O'Connor da735ab312 toolhead: Make sure input_shaper movement starts after endstop checking 
Add a dwell() to the start of drip_move() to ensure that input_shaper
movements scheduled in advance of the nominal move time aren't
scheduled prior to the homing start.  (Otherwise the stepper may move
prior to endstop checking, which can corrupt the "no movement"
checks.)

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 21:11:39 -04:00
Kevin O'Connor 34bf8a04c7 config: Comment updates for recent "make menuconfig" updates 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-29 20:00:26 -04:00
Kevin O'Connor 00706dec21 output_pin: Fix bug in setting of self.resend_interval 
Only set resend_interval if a mcu_duration is specified.  This fixes a
bug introduced in commit 861144d8.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-27 14:52:21 -04:00
Justin Schuh 20c96a8300 config: Update printer-robo3d-r2-2017.cfg 
Improvements and fixes based on feedback:
 * Make speeds and limits more conservative
 * Fix Y endstop position
 * Improve IR bed leveling
 * Fix filament runout pin

Signed-off-by: Justin Schuh <code@justinschuh.com>
 2021-03-27 12:55:17 -04:00
Denis Ignatenko cc31810fa8
hall_filament_width_sensor: fix range check error (#4113) 
Signed-off-by: Denis Ignatenko <deniss979@gmail.com>
 2021-03-27 12:53:40 -04:00
Kevin O'Connor 00f8262e57 docs: Add links to Klipper Discourse server to Contact.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-27 12:51:17 -04:00