d9bddc35a1
docs: Add information on running the regression suite locally
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 17:59:23 -04:00
a2c7fd369c
docs: Note tmc2209 and tmc5160 support in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 12:28:39 -04:00
ba27e0aa02
docs: Warn against using "PreloadVE" on KISSlicer
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-23 12:18:24 -04:00
83e6c01ada
probe: Allow probe parameters to be specified as g-code parameters
...
Add PROBE_SPEED, SAMPLES, SAMPLE_RETRACT_DIST, SAMPLES_TOLERANCE,
SAMPLES_TOLERANCE_RETRIES, and SAMPLES_RESULT parameters to the PROBE
command (and to commands that indirectly invoke a probe).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-21 14:44:28 -04:00
8cce3cc8e7
graphstats: Add support for interactive graphs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-19 21:12:26 -04:00
8b00580884
gcode_macro: Parse variable_X parameters using ast.literal_eval()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-07 19:33:31 -04:00
a541c2f60e
docs: Update Config_Changes.md with "samples" move to probe config section
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:15:47 -04:00
97adca18c4
docs: Update Delta_Calibrate.md with probe location bias info
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:08:58 -04:00
e061029b3a
docs: Update Probe_Calibrate.md with information on common probe errors
...
Add a section describing PROBE_ACCURACY, describing probe location
bias, and describing probe temperature bias.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-06 10:08:58 -04:00
5989f7a8a6
firmware_retraction: Implementation of tuneable G10/G11 firmware retraction ( #1617 )
...
This supports getting and setting of retraction parameters without
having to restart klippy.
Signed-off-by: Len Trigg <lenbok@gmail.com>
2019-06-06 09:10:09 -04:00
3f96c0abd8
docs: Minor wording change to Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 10:39:43 -04:00
962c48ecf7
docs: Fix github pages "liquid" rendering of Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 10:31:03 -04:00
94c1ad7241
docs: Add an initial Command_Templates.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
a68f577adf
gcode_macro: Add support for SET_GCODE_VARIABLE command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
ac8f6dfe20
gcode_macro: Rename "status" helper to "printer"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-04 09:50:30 -04:00
a238ec6f98
idle_timeout: Add SET_IDLE_TIMEOUT gcode
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-06-04 09:46:26 -04:00
c54b8da530
gcode: Add support for SAVE_GCODE_STATE and RESTORE_GCODE_STATE commands
...
Add commands to save and restore the current g-code state.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-31 10:23:56 -04:00
d6b69938ab
gcode: Don't apply the SET_GCODE_OFFSET to the next g-code command
...
The SET_GCODE_OFFSET command could cause unwanted behavior when an
offset is applied to the following g-code command. (In particular,
when the following command is an extrude only move - as in
issue #1289.)
Don't apply the offset immediately. Instead, add support for a MOVE=1
parameter which will schedule a move to apply the given offset.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-26 11:19:15 -04:00
500f37821d
docs: Improve bltouch v3 documentation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-26 11:09:32 -04:00
c77285287b
docs: Try to be more clear that the "paper test" steps need to be run
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-24 22:44:00 -04:00
6c4c26c319
docs: Minor wording change to Bed_Level.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-23 19:31:44 -04:00
1856f95503
docs: Recommend OctoPrint 1.3.11 or later
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-20 23:01:04 -04:00
ad12ffa981
docs: Use markdown syntax for http links in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-20 17:19:33 -04:00
fd1dff3f02
docs: Fix numbering in FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-08 16:48:14 -04:00
73fd292637
docs: Update "avr restart=command" FAQ to point to bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-07 23:02:20 -04:00
8524602b6e
docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 23:10:32 -04:00
17dd6e5097
docs: Fix markdown table layout in html rendering
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 22:56:56 -04:00
b5f79d5e77
docs: Simplify main html page now that there is a logo
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 22:37:56 -04:00
57cf0759c0
docs: Add logos to web page
...
Also, move docs/index.md to docs/_layouts/home.html. Add a
docs/_layouts/README file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 22:35:35 -04:00
85c01d4b6a
docs: Minor node changes to klipper logo
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 11:42:40 -04:00
49b18a6be7
docs: Update logo so that edges overlap
...
Overlapping edges reduce the effects of anti-aliasing.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 11:31:29 -04:00
9b960e63fb
docs: Add a Klipper logo
...
Signed-off-by: Jonne Kuusela <johnedwa@gmail.com>
Signed-off-by: Michael J Shephard <michael.j.shephard@gmail.com>
Signed-off-by: Thomas Herrmann <therrmann23@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-18 11:31:29 -04:00
6f34ba59cb
docs: Add an index page for the www.klipper3d.org website
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 22:00:35 -04:00
4739e28137
docs: Add a github pages html template
...
Add an html template so that each page has a navbar at the top and a
sidebar on the left with an auto-generated table of contents.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 20:55:41 -04:00
64e7235e48
docs: Rewrite the Overview.md - just list documents by category
...
Replace the Overview.md document description with a list of documents
and a brief description of their contents. The goal is to make it
easier for users to find information.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 20:45:00 -04:00
cb04e4c45d
docs: Fix alignment of tmc2208.svg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-16 11:34:45 -04:00
c440c6b7aa
docs: Start of google pages _config.yml file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-15 11:04:23 -04:00
e3df39245f
docs: Fixup github pages
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-14 22:41:23 -04:00
8a6d415745
Update CNAME
2019-04-14 21:25:54 -04:00
b90a04a5cf
Create CNAME
2019-04-14 21:21:14 -04:00
63f8d8cc79
Set theme jekyll-theme-leap-day
2019-04-14 21:17:52 -04:00
8bc9f39c58
docs: Avoid using .. in markdown links
...
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-14 21:12:21 -04:00
04adde9a02
docs: Update Installation.md to point to list of supported ARM mcus
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-06 18:47:02 -04:00
de124677b0
docs: Update BLTouch.md to refer to Probe_Calibrate.md for offset config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 18:22:57 -04:00
9f9262cba8
docs: Minor wording changes to BLTouch.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 18:20:21 -04:00
54a2c5d58e
BLTouch: Use G90 in the BLTouch.md homing_override example
...
Reported by @sgtnoodle.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 17:49:58 -04:00
a5a6ae83ff
docs: Wrap BLTouch.md to 80 columns.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 17:48:51 -04:00
6318bdc99b
docs: Note the python software dependency update in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 11:20:36 -04:00
0615ab5f89
docs: Note the use of bus enumerations in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:30:04 -04:00
be6b29fabf
sx1509: Convert code to use generic i2c bus support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-04 18:29:30 -04:00
9bd3e80421
docs: Note that graphstats.py can produce different types of graphs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-01 22:24:45 -04:00
2980c2e12c
docs: Minor wording change in MCU_Commands.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-01 22:04:56 -04:00
c30a6f2e6b
docs: Update Protocol documentation with enumerations
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-01 21:41:33 -04:00
b35e07ca2b
docs: STM32F0 benchmarks ( #1462 )
...
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
2019-03-29 09:38:54 -04:00
c105adc80b
temperature_fan: Fix. Temperature fan min speed should be used ( #1405 )
...
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
2019-03-28 14:07:40 -04:00
c7330e07a4
stm32f0: Various fixes according to comment: ( #1453 )
...
* Copyright in log.c
* GPIO check completely removed
* generic/timer_irq added
* Change in doc section
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
2019-03-28 10:21:51 -04:00
312cabc3f7
docs: Move benchmark information from Debugging.md to new Benchmarks.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-28 09:52:06 -04:00
de7444ca69
docs: Remove spurious executable flag from documents
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-24 12:17:12 -04:00
b79db3e3d6
docs: Documentation draft for STM32F0
...
Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
2019-03-24 12:10:11 -04:00
9aadc3c7fa
docs: Also note that driver_VSENSE was removed from tmc2660 driver
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 22:40:42 -04:00
efab177645
docs: Note tmc2660 driver_HEND default change from 6 to 3
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-22 20:41:32 -04:00
0980b7e4ec
tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands ( #1419 )
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
2019-03-22 20:37:03 -04:00
06c0463d44
Update sensorless homing documentation to disable second home
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
2019-03-19 10:55:59 -04:00
b28e95ca1a
command: Always pass a string to the DECL_CONSTANT() macro
...
Make it clear that the name of the constant being defined is a string.
When the value being defined is also a string, use a new
DECL_CONSTANT_STR() macro.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-17 19:38:18 -04:00
12f6513ba2
docs: Recommend OctoPi v0.16.0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-11 22:13:04 -04:00
96c4e1c5a0
docs: Update atsam usb transfer benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 21:59:18 -04:00
d3f6dad853
controller_fan: Allow multiple controller_fan sections to be defined
...
It may be necessary to define multiple fans, so allow each config
section to be named.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-10 13:57:01 -04:00
5c0a2479be
screws_tilt_adjust: Add new screws_tilt_adjust tool ( #1367 )
...
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
2019-03-08 11:47:17 -05:00
563bc37073
tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL
...
Use the field names from the trinamic specification. This makes the
field similar to all the other driver_XXX config options.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 11:25:19 -05:00
89935c6831
docs: Update Config_Changes.md with tmc2660 changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-08 11:08:24 -05:00
789379e95b
tmc2660: Add INIT_TMC and SET_TMC_FIELD gcodes
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-03-08 11:04:14 -05:00
d62a41b930
manual_stepper: Add support for moves with acceleration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-03 13:38:10 -05:00
69491e2dab
filament_switch_sensor: update documentation
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-03-01 00:45:51 -05:00
c8d7e28a35
atsamd: Add support for programming SERCOM pins
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 00:40:44 -05:00
c039b33f2a
tmc2130: Add support for INIT_TMC command
...
Signed-off-by: Frank Kang <amblidex@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-01 00:24:39 -05:00
b40a04fb8d
docs: Update Installation document to emphasize the "stay connected" step
...
Move the OctoPrint "stay connected" during error configuration step to
its own paragraph. Hopefully this will make it less likely that users
skip this step.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 20:03:44 -05:00
88ebedcc63
docs: Update Installation document to suggest using /dev/serial/by-id/
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 19:58:09 -05:00
f7d8854587
bed_mesh: simplify configuration
...
The 'bed_shape' option has been removed. The user will enter a 'bed_radius' if they have a round be, otherwise they should enter 'min_point' and 'max_point'. When the bed is round the user should supply a 'round_probe_count' option, otherwise just 'probe_count'.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2019-02-25 13:34:14 -05:00
31987c7bcd
docs: Add a Manual_Probe.md document
...
Add information on calibrating the bed on traditional printers with a
Z endstop and bed screws.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-24 00:49:47 -05:00
80c8bd8b4d
bed_screws: Add a helper tool for leveling bed screws
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-24 00:49:47 -05:00
328bd89fc1
docs: Warn against using the TMC2208 in standalone mode
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-20 16:22:06 -05:00
276d5a1436
probe: Add PROBE_ACCURACY command
...
Implementation of "PROBE_ACCURACY" to measure the maximum, minimum,
average and standard deviation of a probe.
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-18 00:36:28 -05:00
82efed5e2a
docs: added an answer to the FAQ about detecting lost steps ( #1265 )
...
Signed-off-by: christian mock <cm@tahina.priv.at>
2019-02-17 22:35:58 -05:00
cc4ecef88b
mcp4018: Add initial support for the mcp4018 digipot
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-16 08:16:37 -05:00
0f674ef407
tsl1401cl_filament_width_sensor: Filament Width Sensor Support ( #1132 )
...
Support added for filament diameter sensor. Sample configuration parameters added to example-extras.cfg.
Signed-off-by: Mustafa YILDIZ <mydiz@hotmail.com>
2019-02-14 10:13:48 -05:00
c6d1d1bd8c
Merge pull request #1242 from john--/pr_generic_heater
...
Generic Heater Support
2019-02-14 10:08:26 -05:00
dd303ec4a9
docs: Try to make manual vs automatic probing more clear in DELTA_CALIBRATE
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-13 23:20:34 -05:00
6316b2c1b6
Generic Heater Support
...
Adds the ability to register a custom/generic heater through a new extra called heater_generic.
This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax:
SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp>
Signed-off-by: John Jardine <john@gprime.net>
2019-02-14 01:15:11 +00:00
5aa4fd2b4a
docs: Note MCP4728 in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 18:39:12 -05:00
2d7c3a84ee
manual_stepper: Add an "extras" module for manually controlling a stepper
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:38:13 -05:00
57e6acbc5c
docs: Add Bed_Level.md and Probe_Calibrate.md documents
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
b0b9fc6f4a
probe: Use manual_probe helper when performing manual probes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
35ea4a137d
probe: Add PROBE_CALIBRATE command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
d14a53e160
manual_probe: Add a helper script for performing manual Z probing
...
Add MANUAL_PROBE and Z_ENDSTOP_CALIBRATE commands.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-12 13:20:32 -05:00
805e56008f
docs: Note command dispatch benchmark needs desktop class machine
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-11 16:35:03 -05:00
5ab6bcd1d7
docs: Report the actual SAMD51 3 stepper rate in the Features benchmark
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-11 12:57:44 -05:00
607461f7b6
docs: Update duet2 benchmarks
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-02-10 17:59:40 -05:00
faedc77621
docs: Fix typo in Protocol.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-10 11:53:56 -05:00
32e0d4d3ac
docs: Update atsam benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-07 13:24:03 -05:00
1f9208dc66
docs: Update benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-06 22:08:39 -05:00
Kevin O'Connor
Len Trigg
Arksine
Eugene Krashtan
Douglas Hammond
Eugene Krashtan
amblidex
Frank Kang
Rui Caridade
Florian Heilmann
Rui Caridade
christian mock
nopbit
John Jardine