d73340474b
docs: Use "look-ahead" instead of "lookahead" in Code Overview
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 12:02:15 -04:00
4f7237de44
docs: Update Firmware Commands document with an integer example
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 12:00:10 -04:00
4096745a58
docs: Use a markdown link to docs/prints/square.stl
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 12:00:09 -04:00
a97e074022
docs: Kinematics document image updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 12:00:09 -04:00
917c6aa94a
docs: Todo updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-27 09:52:38 -04:00
05bd6fda7e
config: Add a sample config file for RAMBo boards
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-26 11:51:40 -04:00
7c78de989d
config: Add a sample config file for RAMPS boards
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-26 11:48:35 -04:00
35a6d9ba87
gcode: Sort the order of commands in HELP
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-26 10:44:22 -04:00
c63754fc32
gcode: Limit build_handlers() method to just building available commands
...
The set_printer_ready() can be called from a background thread on a
shutdown event, so don't try to lookup the printer components in that
case. Simplify build_handlers() so that it no longer tests for
components being available - test for component availability in the
command handlers.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-26 10:31:58 -04:00
ccb93068fe
msgproto: Rework dump() so it also works with params
...
Always call the regular .parse() method for each message type during
dump() - add a new .format_params() method for dumping a verbose
representation of the parsed message. This allows the new
format_params() to also be used with data already parsed.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-25 13:58:13 -04:00
a6fe355801
console: Automatically convert float values to int during evaluation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-25 12:26:13 -04:00
fe11c3e348
console: Use stdout.write() instead of print
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-25 12:26:13 -04:00
56d4422d31
docs: Reword alternate linux machine in installation instructions
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-24 09:39:40 -04:00
e507848a8f
docs: Remove "experimental" from descriptions
...
The Klipper software has progressed to the point where it does not
need to be described as "experimental" software.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-24 09:31:39 -04:00
70599667cb
docs: Installation updates
...
Recommend using 'make flash' and clean up the octoprint instructions.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-24 09:21:21 -04:00
1878da228d
build: Add workaround to suppress broken avr-gcc "misspelled" warnings
...
Detect avr gcc v4.8.1 and then disable warnings during the klipper.o
linking to suppress bogus "misspelled signal handler" warnings.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-24 08:54:10 -04:00
37865d69a2
basecmd: Add debugging commands for testing communication
...
Add "debug_ping" and "debug_nop" testing commands.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-23 13:37:49 -04:00
83eba902a3
build: Support makefile rule with default flashing commands
...
Support a "make flash FLASH_DEVICE=/dev/ttyACM0" rule with the default
commands for flashing a device.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-21 11:01:07 -04:00
ec805aee2e
scripts: Add octopi installation scripts
...
Add a system startup script so that Klipper can automatically start at
boot time. Create an installation script that will install the system
dependencies and the startup script.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-21 10:14:27 -04:00
167b18b58f
gcode: Ignore M21 command
...
No need to recommend users disable "SD card support" in octoprint -
instead, just ignore the M21 command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-20 10:11:10 -04:00
4b1a530330
stepcompress: Simplify delta Z only move calculations
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-20 00:56:18 -04:00
19ffaa9ff0
docs: Reword parts of the pressure advance kinematics description.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-19 20:48:23 -04:00
0f5167a407
docs: Misc image updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-19 19:55:50 -04:00
563ab5caa5
docs: Add info on delta acceleration limits
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-19 19:54:48 -04:00
db5b5f121c
docs: Add initial Pressure Advance tuning document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-19 16:02:11 -04:00
1f417a8441
docs: Update Todo - initial kinematic document written
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-15 22:59:34 -04:00
b74b09ea7a
docs: Updates to Features document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-15 22:52:36 -04:00
2cce67ad84
docs: Add initial Kinematics document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-15 22:26:03 -04:00
2cb935c300
mcu: No need to log mcu_stats debugging
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-14 10:43:14 -04:00
b9623c1128
klippy: Don't log stats when the printer is idle
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-14 10:38:37 -04:00
7a386cff7d
mcu: Change "Synchronizing mcu clock" logging to debug
...
Always log the last synchronized clock during a shutdown event, and
use debug level for normal reports.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-14 10:06:11 -04:00
839725e3c5
queuelogger: Automatically roll log file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-14 09:58:34 -04:00
8920479f85
klippy: Remove CLEAR_SHUTDOWN command
...
Advice users to issue a FIRMWARE_RESTART command on a printer shutdown
event, and remove support for CLEAR_SHUTDOWN. A full mcu reset is
preferable and it simplifies the interface.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 14:53:41 -04:00
4c25eae9b4
mcu: Make sure a FIRMWARE_RESTART actually resets the mcu
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 14:29:18 -04:00
a3a45b5037
docs: Update Todo - RPi power over USB now implemented
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 14:18:48 -04:00
dc645d76b4
docs: Reword and reformat parts of move code flow in Code_Overview
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 14:08:02 -04:00
daff83ee9a
hub-ctrl: Add support for micro-controller reset via RPi usb power toggling
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 13:20:13 -04:00
9f9e3e61d6
mcu: Support reset command
...
Extend the FIRMWARE_RESTART command so that it can use the firmware
"reset" command instead of the "arduino" mechanism.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 13:20:13 -04:00
1592395036
reactor: Fix bug causing end() to not always work
...
Only set the self._process flag in run() not _dispatch_loop().
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-13 13:20:13 -04:00
8491b1f86a
docs: Update Features document with latest performance benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 13:53:33 -04:00
a7b4d70cc6
docs: Add documentation on how to run the graphstats.py script
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 13:41:11 -04:00
fa193e9618
graphstats: The times are no longer in UTC time
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 13:40:25 -04:00
050008f3c8
docs: Update Debugging.md file with python virtual env setup
...
Direct readers to the main Installation file to setup the python
virtual environment and remove the outdated instructions in the
Debugging file.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 12:49:12 -04:00
70e53cb080
docs: Update Firmware_Commands with recent end stop changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 12:36:29 -04:00
7b03b04c78
klippy: Support minimum/maximum value checks on configuration variables
...
Verify that numeric parameters are in a sane range when reading the
config.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 11:42:55 -04:00
7a7b98cc31
sam3x8e: Rework adc pin search to be more clear
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 10:01:22 -04:00
15d5837322
avr: Rework adc and pwm pin search to be more clear
...
Rework the pin search loop.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 10:01:22 -04:00
f9ebb8b23e
avr: Move code around in gpio.c
...
Move the PWM, ADC, and SPI pin tables closer to their corresponding
code. This is code movement only - no code changes.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 10:00:54 -04:00
77b94451de
avr: Fix irqstatus_t typo in gpio_pwm_setup
...
The flags and cs variables should be uint8_t not irqstatus_t.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-11 09:49:35 -04:00
ca6245e974
docs: Update Code Overview document with code flow for a typical move
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-04-10 22:10:49 -04:00
Kevin O'Connor