de14d106a1
shaper_calibrate: Add missing import
...
Reported by @Ludy87.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:49:50 -04:00
7793784640
spicmds: Allow inversion of CS pin for SPI busses
...
Signed-off-by: Martin Hierholzer <martin@hierholzer.info>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-22 13:25:03 -04:00
fb3bae4531
neopixel: Simplify color_order parsing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 12:55:32 -04:00
260fd7d367
pca9632: Fix color_order assignment
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 11:07:05 -04:00
fb02e2b577
neopixel: Fix color_order assignment
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 10:55:35 -04:00
5f0885958d
neopixel: Support chains with a mix of color_order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 10:16:10 -04:00
53a7f1dd76
led: Remove has_white check from LEDHelper
...
There is no harm in checking for a white config setting.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 09:34:25 -04:00
630d3b3444
led: Fix SET_LED TRANSMIT=1 handling
...
If the final update in a series of SET_LED update commands didn't
alter a color than the transmit would not occur - even if prior
commands did make color changes. Refactor the update code and fix.
Reported by @mstansberry.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-18 08:55:21 -04:00
240f8ea60b
htu21d: SI7021 is has id 0x15 ( #5375 )
...
This is most probably the result of a copy paste error. All vendor documentation for SI7021 (e.g. https://www.silabs.com/documents/public/data-sheets/Si7021-A20.pdf ) points to 21 and it actually only works when adapted to 0x15 (=21).
Signed-off-by: Uli Wolf <github+klipper@wolf-u.li>
2022-04-11 10:33:41 -04:00
76b22b3125
smart_effector: Initial support of programmable SmartEffector
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2022-04-09 19:04:57 -04:00
22297229b7
temperature_fan: Fix divide by zero error when pid_Ki is zero
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:11:54 -04:00
647a1cd8ca
temperature_fan: Remove deprecated pid_integral_max option
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 12:10:48 -04:00
555ac58a3f
pca9632: Add support for configurable color_order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:48:25 -04:00
f0700c0985
pca9632: Support using hardware I2C
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-07 11:43:52 -04:00
dc7b02f329
neopixel: Support arbitrary RGBW strings in color_order config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-06 09:27:36 -04:00
e6bfc4c9aa
led: Support setting display_template parameters via SET_LED_TEMPLATE
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
1ab3ac39e4
led: Support automated LED updates based on display_template results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
a6ab56c0a6
display: Add a new PrinterDisplayTemplate class for tracking template macros
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
2001eecd5e
pca9533: Add support for 4 brightness levels
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
47828b4056
pca9533: Update to use LEDHelper class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
271c2ac95b
pca9632: Update to use LEDHelper class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
0c425cf014
mcp4018: Support setting minclock and reqclock in SoftwareI2C class
...
This is in preparation for pca9632 changes.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
9136a29196
dotstar: Update to use LEDHelper class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
8b8818c0f7
neopixel: Update to use LEDHelper class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
96795def9c
led: Add support for PWM controlled LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-31 13:08:12 -04:00
c08f83ff47
pid_calibrate: Improve Python3 compatibility in debug file output
...
Reported by @kpishere.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:37:03 -04:00
4d1c3478ab
angle: Add support for reading tle5012b chip registers (for debugging)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
1275281ab6
angle: Initialize tle5012b chip variants to same configuration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
1b08553a42
angle: Report tle5012b temperature
...
Export the tle5012b temperature readings when performing measurements.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
f9d505e376
sensor_angle: Support TLE5012b frame counter for timing
...
Use the tle5012b internal frame counter to calculate the time of each
measurement.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
aec742ece4
angle: Initial support for angle sensor calibration
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
74937326d3
sensor_angle: Add support for bulk querying of spi angle sensors
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
8049243221
atsam: Add support for SAM E70
...
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2022-03-26 11:59:27 -04:00
1390b4d600
virtual_sdcard: Allow spaces in file path for M23
...
Also makes M23 work normally with rename_existing.
Signed-off-by: Justin Schuh <code@justinschuh.com>
2022-03-18 11:44:33 -04:00
98d3fffd79
palette2: Fix typo (gmcd vs gcmd)
...
Reported by @Ludy87.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-17 20:53:07 -04:00
a43973b0e0
skew_corrections: Fix typo (gmcd vs gcmd)
...
Reported by @Ludy87.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-17 20:52:10 -04:00
0761026e36
pca9632: LED module for FlashForge Dreamer 3D printer ( #4654 )
...
Added PCA9632 LED module support using software I2C from MCP4018
modulo drive the LED strip of a FlashForge Dreamer 3D printer.
Based on the PCA9533 module.
Signed-off-by: Ricardo Alcantara <ricardo@vulcanolabs.xyz>
2022-03-14 14:28:42 -04:00
12e304fbec
temperature_fan: add missing round function to get_status temperature
...
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2022-03-14 13:48:38 -04:00
02d770ae3c
neopixel: add BGR for neopixel ( #5160 )
...
Signed-off-by: Thomas Liebold <electron2410@gmail.com>
2022-03-14 12:30:58 -04:00
38b992532a
display_status: stops M73 from setting progress to 0 if P missing
...
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-03-08 14:20:35 -05:00
4815a946c2
extruder_stepper: Do not default to synching with "extruder" at startup
...
With recent changes, the extruder_stepper may be used for new
purposes, and synchronizing to the "extruder" motion queue at startup
may become a confusing default.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-04 13:38:59 -05:00
7c964e5fdf
dac084S085: SPI DAC DAC084S085 implementation ( #5134 )
...
Alligator Board Rev2 tested config sample.
Add example configuration file for Alligator board rev.3.
Signed-off-by: Lorenzo Franco <lorenzo.franco@lorenzing.com>
2022-02-22 10:28:28 -05:00
b0a24a4458
motion_report: Ensure startstop_cb is called atomically
...
Make sure APIDumpHelper() does not invoke the startstop callback while
it is already running.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-21 22:22:14 -05:00
8b0c6fcb08
bed_mesh: Report actual mesh profiles as status
...
Report the actual profiles available via BED_MESH_PROFILE
via the status for use by clients.
Signed-off-by: Kurt Haenen <kurt.haenen@gmail.com>
2022-02-16 13:42:19 -05:00
1c594ef27a
bed_mesh: Fix integer division issue on Python3
...
Reported by @CODeRUS.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-10 14:09:15 -05:00
9ec9742484
extruder: Add support for reversing the direction of extruder stepper movement
...
Extend SET_EXTRUDER_ROTATION_DISTANCE to support reversing the
direction of extruder movement.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-10 13:24:21 -05:00
189188e3ca
extruder: Add a SET_EXTRUDER_ROTATION_DISTANCE command
...
Support altering the extruder distance using the higher-level
rotation_distance. This is in preparation for removal of the
SET_EXTRUDER_STEP_DISTANCE command.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-10 13:24:21 -05:00
54646c77dc
bme280: fix integer handling for python3 in bme280.py ( #5237 )
...
Singed-off-by: Christopher Conroy <cbc02009@gmail.com>
2022-02-06 12:15:35 -05:00
28b568a6ac
gcode_arcs: detect CW / CCW move with renamed G2/G3 command ( #5096 )
...
The G2 / G3 command might be renamed using `gcode_macro` + `rename_existing`. This change allow detecting clockwise / anti-clockwise moves when the command gets renamed.
Signed-off-by: Nick Douma <n.douma@nekoconeko.nl>
2022-01-22 20:47:51 -05:00
2f1edac922
tmc: Fix number of arguments in phase endstop warning ( #5184 )
...
Signed-off-by: Konstantin Vogel <konstantin.vogel@gmx.net>
2022-01-22 20:41:44 -05:00
Kevin O'Connor
Martin Hierholzer
Uli
Dmitry Butyugin
Alex Maclean
Justin Schuh
Ricardo Alcântara
Stefan Dej
electron2410
Pedro Lamas
Lorenzo
Misterke
cbc02009
Nick Douma
D4SK