6c908952bd
spi_software: Remove unused include file
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-17 13:49:03 -04:00
8aca7764c3
stm32: Simplify usbotg packet reading and writing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-16 21:03:47 -04:00
4ec6db7a87
stm32: Add support for additional ADC3 ports on stm32f4
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-15 23:21:41 -04:00
d3bd4f9622
docs: Update benchmarks with stm32f446 usb test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-15 22:27:58 -04:00
aac51bdb0a
stm32: Initial support for USB On-The-Go (OTG) driver on stm32f4
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-15 22:26:49 -04:00
841150ff00
stm32: Enable 48Mhz USB clock on stm32f446
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-14 19:33:11 -04:00
effe6f6ddd
lcd_st7920: Add brief delay around gpio toggle calls on fast MCUs
...
On fast MCUs (like the SAMD51) it is possible for the gpio to toggle
faster than the st7920 can accept. Add a small delay around the clock
rise signal.
Signed-off-by: Lars R. Hansen <popshansen@hotmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-10 11:45:15 -04:00
a3980cebcc
neopixel: Add support for WS2811 RGB pixel color order
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:58:49 -04:00
3d38211b8a
extra: Add Safe Z home extra
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-08-09 20:49:17 -04:00
f958542ebb
kinematics: Add get_status() method to kinematics
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-08-09 20:49:17 -04:00
09f323a038
config: Update example stepper amps in generic-printrboard.cfg
...
Reported by @Grumps49.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:43:23 -04:00
a70055a625
stm32: Add support for the 32KiB bootloader on the SKR Pro
...
Signed-off-by: Gerrit Sturm <gsturm16@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:37:31 -04:00
96ff54e143
stm32: Add serial USART serial port option for port PD9/PD8
...
Signed-off-by: Gerrit Sturm <gsturm16@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:32:46 -04:00
8c5fc1688a
pins: Add arduino aliases for Adafruit Grand Central board
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 20:15:40 -04:00
43ab8e7113
docs: Fix typo in Code_Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-09 00:13:34 -04:00
f6d1ab2ea2
neopixel: Rework timing so that it works on AVR micro-controllers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-07 15:37:05 -04:00
383fb1dbfd
config: Fix pins for E6 in generic-duet2-duex.cfg
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2019-08-07 11:01:23 -04:00
8712648370
stm32: Fix memory sizing for STM32F405/7 chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 23:35:45 -04:00
9445e1d555
dotstar: Allow any number of chips to be daisy chained
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 22:49:05 -04:00
115b888106
neopixel: Use low priority for LED updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 22:25:26 -04:00
4c09d8bf02
dotstar: Initial support for "dotstar" LEDs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 19:44:32 -04:00
c2a08962b7
spicmds: Rework spi config commands
...
Rework the spi_config commands so that bus configuration and shutdown
message configuration is done separately from the main "config_spi"
command. This makes the spi configuration more flexible. It's now
possible to use software spi without a CS pin. It's now possible to
define multiple SPI messages to send on a shutdown event.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-06 18:56:53 -04:00
30bd7c0e47
docs: Update stm32f1.md document
...
Several restrictions documented in the stm32f1.md no longer apply.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:40:05 -04:00
3d0f7188df
stm32: Automatically disable SWD if PA13/PA14 is used on stm32f103
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:39:42 -04:00
664c869f77
lib: Remove unused stm32f1 "hal" code
...
Now that the stm32f1 code has been merged into the stm32 code, there
is no longer a need to use the upstream stm32f1 "hal" code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:25:40 -04:00
36217f27aa
stm32f1: Remove now unused src/stm32f1/ directory
...
Now that the stm32f1 code has been merged into the stm32 code, there
is no longer a need to keep the stm32f1/ directory.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:25:40 -04:00
fe065d72d0
stm32: Rename clock.c to stm32f4.c
...
Rename the clock.c file to stm32f4.c to make it more clear that the
code is specific to the stm32f4 chips.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:25:40 -04:00
8b9cc62359
stm32: Rename stm32f4/ directory to stm32/
...
Now that the code in stm32f4/ can handle both stm32f1 and stm32f4
chips, rename the directory to just "stm32".
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:25:40 -04:00
ec3d865b51
stm32f4: Add support for USB on stm32f103
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:25:40 -04:00
7efc53ff59
stm32f4: Add support for STM32F103
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-05 11:25:40 -04:00
485164b8b3
docs: Update MCU_Commands with schedule_soft_pwm_out changes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-08-01 00:23:09 -04:00
c356e8362d
tmc_uart: Make sure address is at least 0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 13:13:27 -04:00
a730aec8bc
tmc_uart: Add support for configuring the uart address on tmc2209 chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-31 13:02:27 -04:00
79cec9ba5c
menu: use MOVE=1 for offset_z menu
...
use SET_GCODE_OFFSET's MOVE=1 parameter in the z offset menu.
Less confusing for people who think nothing happened.
Signed-off-by: John "Fess" Fessenden <fess@fess.org>
2019-07-31 11:17:31 -04:00
745a8dc0ac
config: Add an example config file for the bigtreetech skr mini
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-30 21:42:20 -04:00
c176b66f29
stm32f4: Allow the USART serial port to be configured
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-28 22:55:48 -04:00
e6ffef9a9f
stm32f4: Make using the internal clock source a low level option
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-28 22:55:48 -04:00
9bc3a29ee4
stm32f4: Add support for full range of GPIO pins
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-28 22:55:48 -04:00
bc9c8cd7a0
stm32f4: Only enable peripherals once
...
Add is_enabled_pclock() and only initialize spi and adc once during
configuration.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-28 17:57:02 -04:00
ef0784afe6
stm32f4: Encode mode/func into single parameter of gpio_peripheral
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-28 11:32:56 -04:00
7d4c475e52
docs: Update Features.md to note Duet2 Maestro support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-28 11:21:38 -04:00
92c2fbdce4
armcm_timer: Improve comments on wrap_timer code
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-27 22:05:50 -04:00
7bc0a261ab
stm32f4: Automatically calculate dynmem start/end
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-27 21:32:04 -04:00
16616662ed
stm32f4: Add Kconfig build rules for STM32F405/7
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-27 21:32:04 -04:00
961d13ee1a
stm32f4: Add support for SPI
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-27 21:01:01 -04:00
d79f99b188
stm32f4: Add support for ADC
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-27 10:58:28 -04:00
a878831d5e
mcp4728: Update to better match printrbot revf requirements
...
Reported by @Grumps49.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-26 11:02:56 -04:00
73709984b0
stm32f4: Add support for watchdog
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-26 08:36:11 -04:00
899b6726fa
stm32f4: Improve serial baud rate calculation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-26 08:01:31 -04:00
f3d7287a28
stm32f4: Add support for external 8Mhz crystal
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-07-26 07:51:12 -04:00
Kevin O'Connor
Florian Heilmann
fess