Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
2,019 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

336 Commits

Author SHA1 Message Date
Kevin O'Connor 6318bdc99b docs: Note the python software dependency update in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 11:20:36 -04:00
Kevin O'Connor 0615ab5f89 docs: Note the use of bus enumerations in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:30:04 -04:00
Kevin O'Connor be6b29fabf sx1509: Convert code to use generic i2c bus support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:29:30 -04:00
Kevin O'Connor 9bd3e80421 docs: Note that graphstats.py can produce different types of graphs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 22:24:45 -04:00
Kevin O'Connor 2980c2e12c docs: Minor wording change in MCU_Commands.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 22:04:56 -04:00
Kevin O'Connor c30a6f2e6b docs: Update Protocol documentation with enumerations 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 21:41:33 -04:00
Eugene Krashtan b35e07ca2b docs: STM32F0 benchmarks (#1462) 
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
 2019-03-29 09:38:54 -04:00
Douglas Hammond c105adc80b temperature_fan: Fix. Temperature fan min speed should be used (#1405) 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
 2019-03-28 14:07:40 -04:00
Eugene Krashtan c7330e07a4 stm32f0: Various fixes according to comment: (#1453) 
* Copyright in log.c
* GPIO check completely removed
* generic/timer_irq added
* Change in doc section

Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
 2019-03-28 10:21:51 -04:00
Kevin O'Connor 312cabc3f7 docs: Move benchmark information from Debugging.md to new Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-28 09:52:06 -04:00
Kevin O'Connor de7444ca69 docs: Remove spurious executable flag from documents 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-24 12:17:12 -04:00
Eugene Krashtan b79db3e3d6 docs: Documentation draft for STM32F0 
Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
 2019-03-24 12:10:11 -04:00
Kevin O'Connor 9aadc3c7fa docs: Also note that driver_VSENSE was removed from tmc2660 driver 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 22:40:42 -04:00
Kevin O'Connor efab177645 docs: Note tmc2660 driver_HEND default change from 6 to 3 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 20:41:32 -04:00
amblidex 0980b7e4ec tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands (#1419) 
Signed-off-by: Frank Kang <amblidex@outlook.com>
 2019-03-22 20:37:03 -04:00
Frank Kang 06c0463d44 Update sensorless homing documentation to disable second home 
Signed-off-by: Frank Kang <amblidex@outlook.com>
 2019-03-19 10:55:59 -04:00
Kevin O'Connor b28e95ca1a command: Always pass a string to the DECL_CONSTANT() macro 
Make it clear that the name of the constant being defined is a string.
When the value being defined is also a string, use a new
DECL_CONSTANT_STR() macro.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-17 19:38:18 -04:00
Kevin O'Connor 12f6513ba2 docs: Recommend OctoPi v0.16.0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-11 22:13:04 -04:00
Kevin O'Connor 96c4e1c5a0 docs: Update atsam usb transfer benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-10 21:59:18 -04:00
Kevin O'Connor d3f6dad853 controller_fan: Allow multiple controller_fan sections to be defined 
It may be necessary to define multiple fans, so allow each config
section to be named.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-10 13:57:01 -04:00
Rui Caridade 5c0a2479be screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367) 
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
 2019-03-08 11:47:17 -05:00
Kevin O'Connor 563bc37073 tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL 
Use the field names from the trinamic specification.  This makes the
field similar to all the other driver_XXX config options.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 11:25:19 -05:00
Kevin O'Connor 89935c6831 docs: Update Config_Changes.md with tmc2660 changes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 11:08:24 -05:00
Florian Heilmann 789379e95b tmc2660: Add INIT_TMC and SET_TMC_FIELD gcodes 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2019-03-08 11:04:14 -05:00
Kevin O'Connor d62a41b930 manual_stepper: Add support for moves with acceleration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-03 13:38:10 -05:00
Arksine 69491e2dab filament_switch_sensor: update documentation 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-03-01 00:45:51 -05:00
Kevin O'Connor c8d7e28a35 atsamd: Add support for programming SERCOM pins 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:40:44 -05:00
Kevin O'Connor c039b33f2a tmc2130: Add support for INIT_TMC command 
Signed-off-by: Frank Kang <amblidex@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:24:39 -05:00
Kevin O'Connor b40a04fb8d docs: Update Installation document to emphasize the "stay connected" step 
Move the OctoPrint "stay connected" during error configuration step to
its own paragraph. Hopefully this will make it less likely that users
skip this step.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 20:03:44 -05:00
Kevin O'Connor 88ebedcc63 docs: Update Installation document to suggest using /dev/serial/by-id/ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 19:58:09 -05:00
Arksine f7d8854587 bed_mesh: simplify configuration 
The 'bed_shape' option has been removed.  The user will enter a 'bed_radius' if they have a round be, otherwise they should enter 'min_point' and 'max_point'.  When the bed is round the user should supply a 'round_probe_count' option, otherwise just 'probe_count'.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2019-02-25 13:34:14 -05:00
Kevin O'Connor 31987c7bcd docs: Add a Manual_Probe.md document 
Add information on calibrating the bed on traditional printers with a
Z endstop and bed screws.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-24 00:49:47 -05:00
Kevin O'Connor 80c8bd8b4d bed_screws: Add a helper tool for leveling bed screws 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-24 00:49:47 -05:00
Kevin O'Connor 328bd89fc1 docs: Warn against using the TMC2208 in standalone mode 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-20 16:22:06 -05:00
Rui Caridade 276d5a1436 probe: Add PROBE_ACCURACY command 
Implementation of "PROBE_ACCURACY" to measure the maximum, minimum,
average and standard deviation of a probe.

Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-18 00:36:28 -05:00
christian mock 82efed5e2a docs: added an answer to the FAQ about detecting lost steps (#1265) 
Signed-off-by: christian mock <cm@tahina.priv.at>
 2019-02-17 22:35:58 -05:00
Kevin O'Connor cc4ecef88b mcp4018: Add initial support for the mcp4018 digipot 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-16 08:16:37 -05:00
nopbit 0f674ef407 tsl1401cl_filament_width_sensor: Filament Width Sensor Support (#1132) 
Support added for filament diameter sensor. Sample configuration parameters added to example-extras.cfg.

Signed-off-by: Mustafa YILDIZ <mydiz@hotmail.com>
 2019-02-14 10:13:48 -05:00
KevinOConnor c6d1d1bd8c
Merge pull request #1242 from john--/pr_generic_heater 
Generic Heater Support
 2019-02-14 10:08:26 -05:00
Kevin O'Connor dd303ec4a9 docs: Try to make manual vs automatic probing more clear in DELTA_CALIBRATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-13 23:20:34 -05:00
John Jardine 6316b2c1b6 Generic Heater Support 
Adds the ability to register a custom/generic heater through a new extra called heater_generic.
This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax:
SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp>

Signed-off-by: John Jardine <john@gprime.net>
 2019-02-14 01:15:11 +00:00
Kevin O'Connor 5aa4fd2b4a docs: Note MCP4728 in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 18:39:12 -05:00
Kevin O'Connor 2d7c3a84ee manual_stepper: Add an "extras" module for manually controlling a stepper 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:38:13 -05:00
Kevin O'Connor 57e6acbc5c docs: Add Bed_Level.md and Probe_Calibrate.md documents 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor b0b9fc6f4a probe: Use manual_probe helper when performing manual probes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor 35ea4a137d probe: Add PROBE_CALIBRATE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor d14a53e160 manual_probe: Add a helper script for performing manual Z probing 
Add MANUAL_PROBE and Z_ENDSTOP_CALIBRATE commands.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor 805e56008f docs: Note command dispatch benchmark needs desktop class machine 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-11 16:35:03 -05:00
Kevin O'Connor 5ab6bcd1d7 docs: Report the actual SAMD51 3 stepper rate in the Features benchmark 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-11 12:57:44 -05:00
Florian Heilmann 607461f7b6 docs: Update duet2 benchmarks 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2019-02-10 17:59:40 -05:00