Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
1,392 Commits 3 Branches 6 Tags 32 MiB
Commit Graph

1392 Commits

Author SHA1 Message Date
Kevin O'Connor a27e82aef3 docs: Add a section to the FAQ on translating Marlin pin numbers 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-24 21:43:53 -04:00
Romain “Artefact2” Dal Maso 11e9bb286e probe: Allow restarting an incomplete probe set 
Signed-off-by: Romain “Artefact2” Dal Maso <artefact2@gmail.com>
 2018-08-24 13:20:55 -04:00
Florian Heilmann b065f51454 sam4e8e: Fix bug in sam4e gpio.c (#563) 
The bank_id was calculated erroneously. Also unify gpio_in_setup and gpio_out_setup a bit. Also disable make flash for the sam4e8e port as it currently references a version of bossac that is not present on all systems.

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-08-24 13:17:53 -04:00
Florian Heilmann a8a912fbb5 docs: Update sam4e8e docs and benchmarks (#562) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-08-22 19:17:43 -04:00
Arksine e94f3b7827 gcode: M117 fix 
Resolves issue where M117 is not correctly executed when the message begins with numeric or special character.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2018-08-22 12:53:42 -04:00
Janar Sööt 65f0fd6238 display menu module for klipper 
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
 2018-08-20 22:33:05 -04:00
Arksine 3387cccdcf bed_mesh: move probe x and y offsets to the [probe] module 
All probe offsets are now passed to the finalize() callback in the ProbePointsHelper Class.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-08-19 16:52:23 -04:00
Arksine 52df40dfbb bed_mesh: update z_offset check 
Only check the probe's z_offset against the stepper_z endstop position if the probe is used as a virtual endstop.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-08-19 16:52:23 -04:00
Boffgithub 08aacec0b2 config: Update example-extras.cfg (#544) 
Changed 'endstop' to 'stepper' in 'multi-steppers axes' section

Signed-off-by: Ben Warren <boffdroid@gmail.com>
 2018-08-19 10:15:48 -04:00
Kevin O'Connor 1b07be070b heater_fan: Allow multiple heaters to be defined for a heater_fan 
Support the case where a single cooling fan is used with multiple
extruders.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-17 10:20:12 -04:00
Kevin O'Connor e88eab18d0 test: Update .travis.yml to list apt packages one per line 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-17 09:47:57 -04:00
Arksine 868a1f951b docs: Add Mesh Bed Leveling to G-Codes.md 
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-08-17 09:22:55 -04:00
Arksine f337fb1802 config: update examples-extra.cfg to include the bed_mesh module 
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-08-17 09:22:55 -04:00
Arksine e0bd221c57 bed_mesh: mesh bed leveling for Klipper 
Initial implementation of configurable Mesh Bed Leveling.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-08-17 09:22:55 -04:00
Kevin O'Connor be3131de3e docs: Update Config_checks.md to use STEPPER_BUZZ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-09 13:46:07 -04:00
Kevin O'Connor 3f59c3dd48 docs: Add a Bootloaders.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 20:47:04 -04:00
Kevin O'Connor 5fb1c76c0e samd21: Fix description of bootloader offset 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 19:56:43 -04:00
Kevin O'Connor 71063fe500 docs: Warn about possible pin conflicts in benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 13:52:08 -04:00
Kevin O'Connor cbf019a468 docs: It's difficult to estimate real-world usage from the benchmarks 
Remove the prediction on real-world usage as it's not really practical
to make a prediction.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 13:39:29 -04:00
Kevin O'Connor fbec3ebb63 docs: Add benchmarking details to docs/Debugging.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 13:28:08 -04:00
Florian Heilmann 64e6d85898 sam4e8e: Add the SAM4e8e port 
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-08-08 10:44:49 -04:00
Florian Heilmann d15c106288 lib: Add SAM4E CMSIS HAL 
Obtained from Atmel.SAM4E_DFP.1.1.57.atpack

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-08-08 10:44:38 -04:00
Kevin O'Connor f067d0cc78 samd21: Minor fixes to usbserial 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 10:43:57 -04:00
Kevin O'Connor 2eaf3510ab test: Add SAMD21 compile test case 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-07 00:14:16 -04:00
Kevin O'Connor a5d27c55e1 docs: Update perf benchmarks with SAMD21 results 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-07 00:03:42 -04:00
Kevin O'Connor 0daf19c003 samd21: Add support for USB 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-07 00:03:41 -04:00
Kevin O'Connor cf2393efc8 samd21: Add support for gpio pins 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-07 00:03:21 -04:00
Kevin O'Connor 74cf4dc9e0 samd21: Initial support for SAMD21 micro-controllers 
Add initial support for the Atmel SAMD21 micro-controllers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-07 00:03:18 -04:00
Kevin O'Connor 71db5fbe31 lib: Update samd21 code with local changes 
A minor change is necessary to work with GCC's -flto and to work with
common bootloaders.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-07 00:02:44 -04:00
Kevin O'Connor 5633e6c249 lib: Add Atmel SAMD21 cmsis headers 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-06 23:36:05 -04:00
Kevin O'Connor 50142cc1b3 armcm_irq: Enhance clear_active_irq() so it works on cortex-m0 
Minor rework of the assembler so that it does not require thumb-2
instructions.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-06 23:36:05 -04:00
Kevin O'Connor 635a199a47 usb_cdc: Allow USB endpoint ids to be board specific 
It's common for boards to have restrictions on the type of each
endpoint.  So, make it possible for the board to select the endpoint
ids for each endpoint.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-06 23:36:05 -04:00
Kevin O'Connor f4910e119a lpc176x: Use common cmsis-core files 
No need to include separate cmsis files from the mbed project - the
standard CMSIS_5 files work fine.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-06 23:36:05 -04:00
Kevin O'Connor 742048a08d lib: Remove the (now unused) cmsis-sam3x8e directory 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-06 23:36:05 -04:00
Kevin O'Connor e1146c04fd sam3x8e: Use SAM3X CMSIS files instead of arduino CMSIS files 
Update the sam3x8e port use the most recent SAM3X CMSIS files from
Atmel.  The Atmel files appear to have a more consistent license and
it is unclear if there were Arduino specific changes in the CMSIS
files obtained from the Arduino repo.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-06 23:36:05 -04:00
Kevin O'Connor 8572cae9a0 lib: Modify SAM3X CMSIS files to work with GCC's lto feature 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-06 23:36:05 -04:00
Kevin O'Connor dd240f6471 lib: Add Atmel SAM3X CMSIS files 
Add most recent SAM3X CMSIS files from Atmel.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-06 23:36:05 -04:00
Kevin O'Connor 454a873cb8 lib: Add CMSIS_5 files 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-06 23:36:05 -04:00
sillyfrog ed011b5f25 dockerfile: Add a basic reference Dockerfile (#488) 
Dockerfile: Add a basic reference Dockerfile

This is a sample of how to get Klipper running in Docker, because of the
virtual serial port, the user will have to modify things to include
something to send the GCode. I have included a link to my repo which has
OctoPrint up and running as an example.

Signed-off-by: Trent Davis <tgh@sillyfrog.com>
 2018-08-06 13:11:01 -04:00
Kevin O'Connor 7783767c35 klippy: Move tracking of accessed config items into _read_config() method 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-03 18:54:23 -04:00
Kevin O'Connor cd24d61515 docs: Minor change to wording of junction speeds 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-03 15:48:07 -04:00
Kevin O'Connor 1fefd695de docs: Note square corner velocity in lookahead description 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-03 15:43:46 -04:00
Kevin O'Connor 43179d7b6c config: Minor changes to example-extras.cfg documentation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-03 13:00:40 -04:00
Kevin O'Connor 82738955d2 virtual_sdcard: Check if other events need to run after each file read 
Periodically check if other events need to run - this prevents the
virtual_sdcard processing from starving other events.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-02 20:27:34 -04:00
Kevin O'Connor f2d232ef77 force_move: Provide defaults for SET_KINEMATIC_POSITION parameters 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-02 08:58:18 -04:00
Kevin O'Connor c5ecb37b4e test: Minor update to travis-build.sh mcu_compile start notifier 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-01 14:05:31 -04:00
Kevin O'Connor ac5e207241 check_whitespace: Minor simplification of control char check 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-27 12:55:41 -04:00
Kevin O'Connor 7c7de85f01 test: Extend white space check to verify files are valid utf-8 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-26 16:16:05 -04:00
Kevin O'Connor 09a64d24f1 docs: Remove the Todo.md file 
The Todo.md file has gotten stale, and it is no longer an effective
mechanism for tracking changes.  Remove it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-26 12:51:01 -04:00
Kevin O'Connor c0c892d524 force_move: Add support for FORCE_MOVE command 
Add initial support for commands that will forcibly move a stepper
(without updating the kinematic classes with the new position).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-26 12:44:07 -04:00