b6bf455155
tmc2660: Add endstop phase detection functionality to TMC2660 extra ( #816 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-24 16:01:12 -04:00
04a12ec9bd
docs: Update stm32f1.md - usb is now supported.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 13:22:58 -04:00
e4bb90a1ca
bed_mesh: Do not automatically run G28 on BED_MESH_CALIBRATE / BED_MESH_MAP
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
925562cfb1
delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:26:01 -04:00
ca04caa42c
docs: Fix SAM4E8E benchmark test revision
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:21:43 -04:00
2b81b2935c
docs: Update SAM4E8E benchmarks
...
New benchmark numbers reported by @FHeilmann.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-22 11:18:55 -04:00
b903f84c80
docs: Replace get_status example with get_clock in Protocol.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-20 11:53:32 -04:00
530a37196c
docs: Update LPC176x benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-18 09:55:02 -04:00
0079311b0b
docs: Add an Endstop_Phase.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
1e71909d02
endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:49 -04:00
f5c99c1dec
docs: Update benchmarks for Arduino Due
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-13 11:57:13 -04:00
aa693fbdc1
docs: Updates to stm32f103 benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:57:24 -04:00
75fa74313c
stm32f1: Add support for building with bootloader support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:50:51 -04:00
bc5e961d73
stm32f1: Initial support for serial over USB
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-11 10:50:51 -04:00
1e07be4db4
docs: Add a "Lost communication with MCU" section to the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-09 11:22:28 -04:00
852d1666bb
docs: Fix typo in BED_MESH_PROFILE description in G-Codes.md
...
Reported by @fiveNinePlusR
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-04 19:01:18 -04:00
b261d31ec5
bed_mesh: Add ability to save mesh state to persistent memory
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-10-02 16:26:35 -04:00
5c267e4f69
docs: Update Features.md document with tmc2660 support
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-02 14:07:33 -04:00
33887b8c39
probe: Support manual probing at runtime
...
Don't require the config file to specify manual probing. Instead,
allow the user to select manual probing on each ProbePointsHelper
invocation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-01 11:12:30 -04:00
4b5db04f78
docs: Add Delta_Calibrate.md guide with "enhanced delta calibration"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
1165c0c9c5
docs: Additional images for enhanced calibration procedure reference ( #639 )
...
Signed-off-by: Charles Galant <cgalant@cogwheel.net>
2018-09-25 13:48:46 -04:00
0b2c89ecaf
delta_calibrate: Initial support for enhanced delta calibration
...
Add support for an enhanced delta calibration routine that performs XY
dimension calibration.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
5a1b2d61ae
pid_calibrate: Support saving calibration data via SAVE_CONFIG
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
531134f092
configfile: Add support for rewriting the printer config file
...
Add support for writing back the main printer config file with
additional calibration data stored in it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-25 13:48:46 -04:00
3d4ee9e962
docs: Add stm32f1.md link to Overview.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-20 20:11:04 -04:00
174754299a
heater: Add new TURN_OFF_HEATERS command
...
Add a command that will turn off all heaters in the printer. Run this
command in the default idle_timeout action.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-18 16:01:07 -04:00
094b9de69e
gcode: Send proactive state messages
...
Send a g-code info message on printer state changes.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-12 21:31:27 -04:00
f15cd62587
docs: Update Pressure_Advance.md document
...
Update the document to recommend tuning with decreased acceleration
and with square_corner_velocity disabled. Using this approach makes it
possible to test with significantly higher pressure advance values.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-11 12:00:43 -04:00
c8dc47b162
docs: Note digipot support in Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 21:10:53 -04:00
ac3aa097fb
docs: Features.md updates
...
Add information on new features in Klipper.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 20:55:53 -04:00
480415d2e8
docs: Update Bootloaders.md with AVR lfuse hints
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:34:37 -04:00
a5189f7c25
docs: Add some notes to Bootloaders.md on using the atmega168
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:08:55 -04:00
ee67715e2b
docs: Fix link in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 09:16:27 -04:00
28fe6a5df0
docs: Update SAMD21 flashing information in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 09:07:27 -04:00
9b56c4f780
docs: Update Bootloaders.md with updated bossac info for sam3x8e
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 08:54:43 -04:00
96acfdc6d2
docs: Minor rewording of Marlin pin number section of FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-26 23:06:32 -04:00
a27e82aef3
docs: Add a section to the FAQ on translating Marlin pin numbers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-24 21:43:53 -04:00
a8a912fbb5
docs: Update sam4e8e docs and benchmarks ( #562 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-22 19:17:43 -04:00
868a1f951b
docs: Add Mesh Bed Leveling to G-Codes.md
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-17 09:22:55 -04:00
be3131de3e
docs: Update Config_checks.md to use STEPPER_BUZZ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-09 13:46:07 -04:00
3f59c3dd48
docs: Add a Bootloaders.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 20:47:04 -04:00
71063fe500
docs: Warn about possible pin conflicts in benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 13:52:08 -04:00
cbf019a468
docs: It's difficult to estimate real-world usage from the benchmarks
...
Remove the prediction on real-world usage as it's not really practical
to make a prediction.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 13:39:29 -04:00
fbec3ebb63
docs: Add benchmarking details to docs/Debugging.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 13:28:08 -04:00
64e6d85898
sam4e8e: Add the SAM4e8e port
...
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-08 10:44:49 -04:00
a5d27c55e1
docs: Update perf benchmarks with SAMD21 results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-07 00:03:42 -04:00
cd24d61515
docs: Minor change to wording of junction speeds
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-03 15:48:07 -04:00
1fefd695de
docs: Note square corner velocity in lookahead description
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-03 15:43:46 -04:00
f2d232ef77
force_move: Provide defaults for SET_KINEMATIC_POSITION parameters
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-02 08:58:18 -04:00
09a64d24f1
docs: Remove the Todo.md file
...
The Todo.md file has gotten stale, and it is no longer an effective
mechanism for tracking changes. Remove it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-26 12:51:01 -04:00
Florian Heilmann
Kevin O'Connor
Arksine
Charlie