Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

config: Remove hold_current from sample configs and sample macros 

Now that the documentation recommends that hold_current not be set,
update the example config files to not specify a hold_current.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-11-28 20:29:40 -05:00
parent 9552f5e546
commit bfd098eb19
30 changed files with 4 additions and 234 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
config/generic-bigtreetech-e3-rrf-v1.1.cfg
View File

@ -23,7 +23,6 @@ homing_speed: 50
[tmc2209 stepper_x]
uart_pin: PD6
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_y]
@ -40,7 +39,6 @@ homing_speed: 50
[tmc2209 stepper_y]
uart_pin: PD1
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_z]
@ -56,7 +54,6 @@ position_max: 250
[tmc2209 stepper_z]
uart_pin: PD15
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[extruder]
@ -80,7 +77,6 @@ max_temp: 250
[tmc2209 extruder]
uart_pin: PD11
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 999999
[heater_bed]

18
config/generic-bigtreetech-gtr.cfg
View File

@ -126,37 +126,31 @@ max_z_accel: 5
#[tmc2208 stepper_x]
#uart_pin: PC14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PE1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PB5
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PG10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PD4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PC12
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
@ -167,7 +161,6 @@ max_z_accel: 5
#[tmc2130 stepper_x]
#cs_pin: PC14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -177,7 +170,6 @@ max_z_accel: 5
#cs_pin: PE1
#sense_resistor: 0.075
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -187,7 +179,6 @@ max_z_accel: 5
#cs_pin: PB5
#sense_resistor: 0.075
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -197,7 +188,6 @@ max_z_accel: 5
#cs_pin: PG10
#sense_resistor: 0.075
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -207,7 +197,6 @@ max_z_accel: 5
#cs_pin: PD4
#sense_resistor: 0.075
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -217,7 +206,6 @@ max_z_accel: 5
#cs_pin: PC12
#sense_resistor: 0.075
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -232,7 +220,6 @@ max_z_accel: 5
#sense_resistor: 0.075
#interpolate: True
#run_current: 1
#hold_current: 1
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -243,7 +230,6 @@ max_z_accel: 5
#sense_resistor: 0.075
#interpolate: True
#run_current: 1
#hold_current: 1
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -254,7 +240,6 @@ max_z_accel: 5
#sense_resistor: 0.075
#interpolate: True
#run_current: 0.4
#hold_current: 0.4
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -265,7 +250,6 @@ max_z_accel: 5
#sense_resistor: 0.075
#interpolate: True
#run_current: 0.5
#hold_current: 0.5
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -276,7 +260,6 @@ max_z_accel: 5
#sense_resistor: 0.075
#interpolate: True
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6
@ -287,7 +270,6 @@ max_z_accel: 5
#sense_resistor: 0.075
#interpolate: True
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 0
#spi_software_mosi_pin: PG15
#spi_software_miso_pin: PB6

16
config/generic-bigtreetech-octopus.cfg
View File

@ -153,52 +153,44 @@ max_z_accel: 100
#uart_pin: PC4
##diag_pin: PG6
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2209 stepper_y]
#uart_pin: PD11
##diag_pin: PG9
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2209 stepper_z]
#uart_pin: PC6
##diag_pin: PG10
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2209 stepper_]
#uart_pin: PC7
##diag_pin: PG11
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2209 extruder]
#uart_pin: PF2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2209 extruder1]
#uart_pin: PE4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2209 extruder2]
#uart_pin: PE1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2209 extruder3]
#uart_pin: PD3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
########################################
@ -210,7 +202,6 @@ max_z_accel: 100
#spi_bus: spi1
##diag1_pin: PG6
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
@ -218,7 +209,6 @@ max_z_accel: 100
#spi_bus: spi1
##diag1_pin: PG9
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
@ -226,7 +216,6 @@ max_z_accel: 100
#spi_bus: spi1
##diag1_pin: PG10
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2130 stepper_]
@ -234,35 +223,30 @@ max_z_accel: 100
#spi_bus: spi1
##diag1_pin: PG11
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: PF2
#spi_bus: spi1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#cs_pin: PE4
#spi_bus: spi1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
#cs_pin: PE1
#spi_bus: spi1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder3]
#cs_pin: PD3
#spi_bus: spi1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
[board_pins]

3
config/generic-bigtreetech-skr-2.cfg
View File

@ -132,19 +132,16 @@ aliases:
#[tmc2209 stepper_x]
#uart_pin: PE0
#run_current: 0.800
#hold_current: 0.800
#diag_pin:
#[tmc2209 stepper_y]
#uart_pin: PD3
#run_current: 0.800
#hold_current: 0.800
#diag_pin:
#[tmc2209 stepper_z]
#uart_pin: PD0
#run_current: 0.800
#hold_current: 0.800
#diag_pin:
#[tmc2209 extruder]

4
config/generic-bigtreetech-skr-cr6-v1.0.cfg
View File

@ -27,7 +27,6 @@ homing_speed: 50
uart_pin: PC11
tx_pin: PC10
run_current: 0.550
hold_current: 0.450
stealthchop_threshold: 999999
uart_address: 0
@ -48,7 +47,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 2
run_current: 0.550
hold_current: 0.450
stealthchop_threshold: 999999
[stepper_z]
@ -67,7 +65,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 1
run_current: 0.550
hold_current: 0.450
stealthchop_threshold: 999999
[extruder]
@ -93,7 +90,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 3
run_current: 0.600
hold_current: 0.400
stealthchop_threshold: 999999
[heater_bed]

8
config/generic-bigtreetech-skr-e3-dip.cfg
View File

@ -99,25 +99,21 @@ pins: !PC13
#[tmc2208 stepper_x]
#uart_pin: PC10
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PC11
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PC12
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PD2
#run_current: 0.650
#hold_current: 0.500
#stealthchop_threshold: 999999
@ -129,28 +125,24 @@ pins: !PC13
#cs_pin: PC10
#spi_bus: spi3
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#cs_pin: PC11
#spi_bus: spi3
#run_current: 0.580
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#cs_pin: PC12
#spi_bus: spi3
#run_current: 0.580
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: PD2
#spi_bus: spi3
#run_current: 0.650
#hold_current: 0.500
#stealthchop_threshold: 999999

4
config/generic-bigtreetech-skr-e3-turbo.cfg
View File

@ -19,7 +19,6 @@ homing_speed: 50
uart_pin: P1.1
#diag_pin: P1.29
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_y]
@ -37,7 +36,6 @@ homing_speed: 50
uart_pin: P1.10
#diag_pin: P1.28
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_z]
@ -54,7 +52,6 @@ position_max: 250
uart_pin: P1.17
#diag_pin: P1.27
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[extruder]
@ -79,7 +76,6 @@ max_temp: 250
uart_pin: P0.5
#diag_pin: P1.26
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 999999
#[extruder1]

4
config/generic-bigtreetech-skr-mini-e3-v1.0.cfg
View File

@ -30,7 +30,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 0
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_y]
@ -49,7 +48,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 2
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_z]
@ -67,7 +65,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 1
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[extruder]
@ -93,7 +90,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 3
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 999999
[heater_bed]

4
config/generic-bigtreetech-skr-mini-e3-v1.2.cfg
View File

@ -28,7 +28,6 @@ homing_speed: 50
[tmc2209 stepper_x]
uart_pin: PB15
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_y]
@ -45,7 +44,6 @@ homing_speed: 50
[tmc2209 stepper_y]
uart_pin: PC6
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_z]
@ -61,7 +59,6 @@ position_max: 250
[tmc2209 stepper_z]
uart_pin: PC10
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[extruder]
@ -85,7 +82,6 @@ max_temp: 250
[tmc2209 extruder]
uart_pin: PC11
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 999999
[heater_bed]

4
config/generic-bigtreetech-skr-mini-e3-v2.0.cfg
View File

@ -27,7 +27,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 0
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_y]
@ -46,7 +45,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 2
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_z]
@ -64,7 +62,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 1
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[extruder]
@ -90,7 +87,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 3
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 999999
[heater_bed]

4
config/generic-bigtreetech-skr-mini-mz.cfg
View File

@ -30,7 +30,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 0
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_y]
@ -49,7 +48,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 1
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_z]
@ -67,7 +65,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 2
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 999999
[extruder]
@ -93,7 +90,6 @@ uart_pin: PC11
tx_pin: PC10
uart_address: 3
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 999999
[heater_bed]

12
config/generic-bigtreetech-skr-pro.cfg
View File

@ -110,37 +110,31 @@ max_z_accel: 100
#[tmc2208 stepper_x]
#uart_pin: PC13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PE3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PE1
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PD4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PD1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PD6
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
@ -153,7 +147,6 @@ max_z_accel: 100
#spi_bus: spi3a
##diag1_pin: PB10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
@ -161,7 +154,6 @@ max_z_accel: 100
#spi_bus: spi3a
##diag1_pin: PE12
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
@ -169,7 +161,6 @@ max_z_accel: 100
#spi_bus: spi3a
##diag1_pin: PG8
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2130 extruder]
@ -177,7 +168,6 @@ max_z_accel: 100
#spi_bus: spi3a
##diag1_pin: PE15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
@ -185,7 +175,6 @@ max_z_accel: 100
#spi_bus: spi3a
##diag1_pin: PE10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
@ -193,7 +182,6 @@ max_z_accel: 100
#spi_bus: spi3a
##diag1_pin: PG5
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999

10
config/generic-bigtreetech-skr-v1.3.cfg
View File

@ -95,31 +95,26 @@ max_z_accel: 100
#[tmc2208 stepper_x]
#uart_pin: P1.17
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: P1.15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: P1.10
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: P1.8
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: P1.1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
@ -138,7 +133,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: P1.29
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
@ -148,7 +142,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: P1.27
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
@ -158,7 +151,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: P1.25
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2130 extruder]
@ -168,7 +160,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: P1.28
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
@ -178,7 +169,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: P1.26
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999

10
config/generic-bigtreetech-skr-v1.4.cfg
View File

@ -94,31 +94,26 @@ max_z_accel: 100
#[tmc2208 stepper_x]
#uart_pin: P1.10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#
#[tmc2208 stepper_y]
#uart_pin: P1.9
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#
#[tmc2208 stepper_z]
#uart_pin: P1.8
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#
#[tmc2208 extruder]
#uart_pin: P1.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#
#[tmc2208 extruder1]
#uart_pin: P1.1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
@ -132,7 +127,6 @@ max_z_accel: 100
#spi_software_mosi_pin: P1.17
#spi_software_sclk_pin: P0.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#diag1_pin: P1.29
@ -142,7 +136,6 @@ max_z_accel: 100
#spi_software_mosi_pin: P1.17
#spi_software_sclk_pin: P0.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#diag1_pin: P1.28
@ -152,7 +145,6 @@ max_z_accel: 100
#spi_software_mosi_pin: P1.17
#spi_software_sclk_pin: P0.4
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#diag1_pin: P1.27
@ -162,7 +154,6 @@ max_z_accel: 100
#spi_software_mosi_pin: P1.17
#spi_software_sclk_pin: P0.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#diag1_pin: P1.26
@ -172,7 +163,6 @@ max_z_accel: 100
#spi_software_mosi_pin: P1.17
#spi_software_sclk_pin: P0.4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#diag1_pin: P1.25

18
config/generic-flyboard.cfg
View File

@ -144,55 +144,46 @@ max_z_accel: 100
#[tmc2208 stepper_x]
#uart_pin: PG13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PG10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PD5
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PD1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PA14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PG6
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder3]
#uart_pin: PG3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder4]
#uart_pin: PD10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder5]
#uart_pin: PB12
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
@ -204,63 +195,54 @@ max_z_accel: 100
#cs_pin: PG13
##diag1_pin: PC3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#cs_pin: PG10
##diag1_pin: PF2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#cs_pin: PBD5
##diag1_pin: PF0
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: PD1
##diag1_pin: PE15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#cs_pin: PA14
##diag1_pin: PE10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
#cs_pin: PG6
##diag1_pin: PC15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder3]
#cs_pin: PG3
##diag1_pin: PC15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder4]
#cs_pin: PD10
##diag1_pin: PC15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder5]
#cs_pin: PB12
##diag1_pin: PC15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999

4
config/generic-fysetc-cheetah-v1.1.cfg
View File

@ -25,7 +25,6 @@ uart_pin: PA3
tx_pin: PA2
uart_address: 0
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_y]
@ -44,7 +43,6 @@ uart_pin: PA3
tx_pin: PA2
uart_address: 2
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_z]
@ -62,7 +60,6 @@ uart_pin: PA3
tx_pin: PA2
uart_address: 1
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
[extruder]
@ -88,7 +85,6 @@ uart_pin: PA3
tx_pin: PA2
uart_address: 3
run_current: 1.0
hold_current: 0.500
stealthchop_threshold: 999999
[heater_bed]

4
config/generic-fysetc-cheetah-v1.2.cfg
View File

@ -24,7 +24,6 @@ homing_speed: 50
uart_pin: PA12
tx_pin: PA11
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_y]
@ -42,7 +41,6 @@ homing_speed: 50
uart_pin: PB7
tx_pin: PB6
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_z]
@ -59,7 +57,6 @@ position_max: 200
uart_pin: PB11
tx_pin: PB10
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
[extruder]
@ -84,7 +81,6 @@ max_temp: 250
uart_pin: PA3
tx_pin: PA2
run_current: 1.0
hold_current: 0.500
stealthchop_threshold: 999999
[heater_bed]

12
config/generic-fysetc-f6.cfg
View File

@ -112,42 +112,36 @@ pins: PB0
#uart_pin: PG3
#tx_pin: PJ2
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PJ3
#tx_pin: PJ4
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PE2
#tx_pin: PE6
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PJ5
#tx_pin: PJ6
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PE7
#tx_pin: PD4
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PA1
#tx_pin: PD5
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
########################################
@ -166,42 +160,36 @@ pins: PB0
#cs_pin: PG4
#diag1_pin: PK1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
#cs_pin: PG2
#diag1_pin: PJ1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
#cs_pin: PJ7
#diag1_pin: PB6
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder]
#cs_pin: PL2
#diag1_pin: PE4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
#cs_pin: PC5
#diag1_pin: PJ0
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
#cs_pin: PL7
#diag1_pin: PK2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
########################################

12
config/generic-fysetc-s6-v2.cfg
View File

@ -106,37 +106,31 @@ max_z_accel: 100
#[tmc2208 stepper_x]
#uart_pin: PE8
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PC4
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PD12
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PA15
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PC5
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PE0
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
@ -149,7 +143,6 @@ max_z_accel: 100
#cs_pin: PE7
#diag1_pin: PB14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
@ -157,7 +150,6 @@ max_z_accel: 100
#cs_pin: PE15
#diag1_pin: PB13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
@ -165,7 +157,6 @@ max_z_accel: 100
#cs_pin: PD10
#diag1_pin: PA0
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder]
@ -173,7 +164,6 @@ max_z_accel: 100
#cs_pin: PD7
#diag1_pin: PA3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
@ -181,7 +171,6 @@ max_z_accel: 100
#cs_pin: PC14
#diag1_pin: PA2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
@ -189,7 +178,6 @@ max_z_accel: 100
#cs_pin: PC15
#diag1_pin: PA1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999

12
config/generic-fysetc-s6.cfg
View File

@ -113,42 +113,36 @@ max_z_accel: 100
#uart_pin: PE8
#tx_pin: PE9
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PE13
#tx_pin: PE14
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PD12
#tx_pin: PD11
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PA15
#tx_pin: PD3
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PC5
#tx_pin: PC4
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PE0
#tx_pin: PE1
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
########################################
@ -171,7 +165,6 @@ max_z_accel: 100
#cs_pin: PE7
#diag1_pin: PB14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
@ -179,7 +172,6 @@ max_z_accel: 100
#cs_pin: PE15
#diag1_pin: PB13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
@ -187,7 +179,6 @@ max_z_accel: 100
#cs_pin: PD10
#diag1_pin: PA0
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder]
@ -195,7 +186,6 @@ max_z_accel: 100
#cs_pin: PD7
#diag1_pin: PA3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
@ -203,7 +193,6 @@ max_z_accel: 100
#cs_pin: PC14
#diag1_pin: PA2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
@ -211,7 +200,6 @@ max_z_accel: 100
#cs_pin: PC15
#diag1_pin: PA1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
########################################

16
config/generic-fysetc-spider.cfg
View File

@ -129,50 +129,42 @@ max_z_accel: 100
#[tmc2208 stepper_x]
#uart_pin: PE7
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PE15
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PD10
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PD7
#run_current: 0.8
#hold_current: 0.5
#sense_resistor: 0.110
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PC14
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PC15
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder3]
#uart_pin: PA15
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
#[tmc2208 extruder4]
#uart_pin: PD11
#run_current: 0.8
#hold_current: 0.5
#stealthchop_threshold: 999999
########################################
@ -184,7 +176,6 @@ max_z_accel: 100
#cs_pin: PE7
#diag1_pin: PB14
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
@ -192,7 +183,6 @@ max_z_accel: 100
#cs_pin: PE15
#diag1_pin: PB13
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
@ -200,7 +190,6 @@ max_z_accel: 100
#cs_pin: PD10
#diag1_pin: PA0
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder]
@ -208,7 +197,6 @@ max_z_accel: 100
#cs_pin: PD7
#diag1_pin: PA3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
@ -216,7 +204,6 @@ max_z_accel: 100
#cs_pin: PC14
#diag1_pin: PA2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder2]
@ -224,21 +211,18 @@ max_z_accel: 100
#cs_pin: PC15
#diag1_pin: PA1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder3]
#spi_bus: spi4
#cs_pin: PA15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder4]
#spi_bus: spi4
#cs_pin: PD11
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
########################################

16
config/generic-mellow-super-infinty-hv.cfg
View File

@ -188,49 +188,41 @@ max_z_accel: 100
#[tmc2208 stepper_x]
#uart_pin: PC4
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: PF12
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: PF15
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: PE7
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: PE10
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder2]
#uart_pin: PF1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder3]
#uart_pin: PG2
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder4]
#uart_pin: PG5
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
@ -253,7 +245,6 @@ max_z_accel: 100
#spi_software_sclk_pin: PB3
##diag1_pin: PG12
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc5160 stepper_y]
@ -263,7 +254,6 @@ max_z_accel: 100
#spi_software_sclk_pin: PB3
##diag1_pin: PG11
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc5160 stepper_z]
@ -273,7 +263,6 @@ max_z_accel: 100
#spi_software_sclk_pin: PB3
##diag1_pin: PG10
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc5160 extruder]
@ -283,7 +272,6 @@ max_z_accel: 100
#spi_software_sclk_pin: PB3
##diag1_pin: PG9
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc5160 extruder1]
@ -293,7 +281,6 @@ max_z_accel: 100
#spi_software_sclk_pin: PB3
##diag1_pin: PD7
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc5160 extruder2]
@ -303,7 +290,6 @@ max_z_accel: 100
#spi_software_sclk_pin: PB3
##diag1_pin: PD6
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc5160 extruder3]
@ -313,7 +299,6 @@ max_z_accel: 100
#spi_software_sclk_pin: PB3
##diag1_pin: PA8
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc5160 extruder4]
@ -323,7 +308,6 @@ max_z_accel: 100
#spi_software_sclk_pin: PB3
##diag1_pin: PF3
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999

4
config/generic-mks-robin-e3.cfg
View File

@ -70,25 +70,21 @@ max_temp: 250
[tmc2209 stepper_x]
uart_pin: PC7
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
[tmc2209 stepper_y]
uart_pin: PD2
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
[tmc2209 stepper_z]
uart_pin: PC12
run_current: 0.650
hold_current: 0.450
stealthchop_threshold: 999999
[tmc2209 extruder]
uart_pin: PC11
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
[fan]

3
config/generic-mks-rumba32-v1.0.cfg
View File

@ -119,21 +119,18 @@ aliases:
#uart_pin: PC14
##tx_pin: PA3
#run_current: 0.800
#hold_current: 0.800
#diag_pin:
#[tmc2209 stepper_y]
#uart_pin: PE4
##tx_pin: PA4
#run_current: 0.800
#hold_current: 0.800
#diag_pin:
#[tmc2209 stepper_z]
#uart_pin: PE0
##tx_pin: PD13
#run_current: 0.800
#hold_current: 0.800
#diag_pin:
#[tmc2209 extruder]

10
config/generic-mks-sgenl.cfg
View File

@ -90,31 +90,26 @@ max_z_accel: 100
#[tmc2208 stepper_x]
#uart_pin: P1.1
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_y]
#uart_pin: P1.8
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 stepper_z]
#uart_pin: P1.10
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2208 extruder]
#uart_pin: P1.15
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2208 extruder1]
#uart_pin: P1.17
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
@ -129,7 +124,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: ^!P1.29
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_y]
@ -139,7 +133,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: ^!P1.27
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 stepper_z]
@ -149,7 +142,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: ^!P1.25
#run_current: 0.650
#hold_current: 0.450
#stealthchop_threshold: 999999
#[tmc2130 extruder]
@ -159,7 +151,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: ^!P1.28
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999
#[tmc2130 extruder1]
@ -169,7 +160,6 @@ max_z_accel: 100
#spi_software_sclk_pin: P0.4
##diag1_pin: ^!P1.26
#run_current: 0.800
#hold_current: 0.500
#stealthchop_threshold: 999999

4
config/generic-th3d-ezboard-lite-v1.2.cfg
View File

@ -33,7 +33,6 @@ position_max: 350
uart_pin: P0.5
tx_pin: P0.4
run_current: 0.600
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_y]
@ -50,7 +49,6 @@ position_max: 350
uart_pin: P0.11
tx_pin: P0.10
run_current: 0.600
hold_current: 0.500
stealthchop_threshold: 999999
[stepper_z]
@ -67,7 +65,6 @@ position_max: 400
uart_pin: P0.20
tx_pin: P0.19
run_current: 0.700
hold_current: 0.600
stealthchop_threshold: 999999
[extruder]
@ -92,7 +89,6 @@ max_temp: 210
uart_pin: P0.21
tx_pin: P0.22
run_current: 0.800
hold_current: 0.700
stealthchop_threshold: 999999
[heater_bed]

3
config/sample-bigtreetech-exp-mot.cfg
View File

@ -34,7 +34,6 @@ position_max: 400
uart_pin: EXP1_6
microsteps: 16
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
diag_pin: EXP1_5
@ -42,7 +41,6 @@ diag_pin: EXP1_5
uart_pin: EXP1_4
microsteps: 16
run_current: 0.800
hold_current: 0.500
stealthchop_threshold: 999999
diag_pin: EXP1_3
@ -50,6 +48,5 @@ diag_pin: EXP1_3
uart_pin: EXP1_2
microsteps: 16
run_current: 0.650
hold_current: 0.450
stealthchop_threshold: 999999
diag_pin: EXP1_1

1
config/sample-bigtreetech-hermit-crab-canbus.cfg
View File

@ -35,7 +35,6 @@ max_temp: 250
[tmc2209 extruder]
uart_pin: HermitCrab: PB0
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 999999
[fan]

3
config/sample-mmu2s-diy.cfg
View File

@ -36,7 +36,6 @@ endstop_pin: ^mmboard:PC2 # PINDA X+
[tmc2208 manual_stepper gear_stepper]
uart_pin: mmboard:PC14
run_current: 1.000
hold_current: 0.600
interpolate: True
sense_resistor: 0.110
@ -53,7 +52,6 @@ accel: 80
[tmc2209 manual_stepper idler_stepper]
uart_pin: mmboard:PB7
run_current: 0.800
hold_current: 0.800
interpolate: True
sense_resistor: 0.110
stealthchop_threshold: 999999
@ -73,7 +71,6 @@ endstop_pin: !mmboard:PC0 # switch endstop on the left Z-
[tmc2209 manual_stepper selector_stepper]
uart_pin: mmboard:PC12
run_current: 1.000
hold_current: 0.400
interpolate: True
sense_resistor: 0.110
stealthchop_threshold: 999999

11
docs/TMC_Drivers.md
View File

@ -317,9 +317,7 @@ for the driver's internal stall flag to still be set from a previous
move.
It can also be useful to have that macro set the driver current before
homing and set a new current after the carriage has moved away. This
also allows a hold_current to be set during prints (a hold_current
is not recommended during sensorless homing).
homing and set a new current after the carriage has moved away.
An example macro might look something like:
```
@ -328,9 +326,8 @@ gcode:
{% set HOME_CUR = 0.700 %}
{% set driver_config = printer.configfile.settings['tmc2209 stepper_x'] %}
{% set RUN_CUR = driver_config.run_current %}
{% set HOLD_CUR = driver_config.hold_current %}
# Set current for sensorless homing
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CUR} HOLDCURRENT={HOME_CUR}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CUR}
# Pause to ensure driver stall flag is clear
G4 P2000
# Home
@ -339,7 +336,7 @@ gcode:
G90
G1 X5 F1200
# Set current during print
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CUR} HOLDCURRENT={HOLD_CUR}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={RUN_CUR}
```
The resulting macro can be called from a
@ -360,7 +357,7 @@ Use the tuning guide described above to find the appropriate "stall
sensitivity" for each carriage, but be aware of the following
restrictions:
1. When using sensorless homing on CoreXY, make sure there is no
`hold_current` in effect for either stepper during homing.
`hold_current` configured for either stepper.
2. While tuning, make sure both the X and Y carriages are near the
center of their rails before each home attempt.
3. After tuning is complete, when homing both X and Y, use macros to