Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

docs: Update documentation with Arduino Due installation info 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2016-06-14 15:15:34 -04:00
parent cc62a3dbf3
commit afb1839b6b
1 changed files with 18 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
docs/Installation.md
View File

@ -23,7 +23,9 @@ following commands:
```
sudo apt-get update
sudo apt-get install avrdude gcc-avr binutils-avr avr-libc libncurses-dev
sudo apt-get install libncurses-dev
sudo apt-get install avrdude gcc-avr binutils-avr avr-libc # AVR toolchain
sudo apt-get install bossa-cli libnewlib-arm-none-eabi # ARM toolchain
```
The host software (Klippy) requires a one-time setup - run as the
@ -60,8 +62,8 @@ make
Ignore any warnings you may see about "misspelled signal handler" (it
is due to a bug fixed in gcc v4.8.3).
Installing Klipper on a micro-controller
----------------------------------------
Installing Klipper on an AVR micro-controller
---------------------------------------------
The avrdude package can be used to install the micro-controller code
on an AVR ATmega chip. The exact syntax of the avrdude command is
@ -72,6 +74,19 @@ command for atmega2560 chips:
example-only$ avrdude -C/etc/avrdude.conf -v -patmega2560 -cwiring -P/dev/ttyACM0 -b115200 -D -Uflash:w:/home/pi/klipper/out/klipper.elf.hex:i
```
Installing Klipper on an Arduino Due
------------------------------------
Klipper currently uses the Arduino Due USB programming port (it will
not work when connected to the application USB port). The programming
port is the USB port closest to the power supply. To flash Klipper to
the Due connect it to the host machine and run:
```
stty -F /dev/ttyACM0 1200
bossac -i -p ttyACM0 -R -e -w -v -b ~/klipper/out/klipper.bin
```
Setting up the printer configuration
====================================