config: added a configuration file for FLSUN QQ-S Pro delta printer (#4237)

Signed-off-by: Joseph Orduna <joey.orduna@gmail.com>
This commit is contained in:
Joseph Orduna 2021-06-27 18:27:39 -04:00 committed by GitHub
parent 7266882201
commit 274d52729a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 106 additions and 1 deletions

BIN
.DS_Store vendored Normal file

Binary file not shown.

View File

@ -8,7 +8,7 @@
# Note that the "make flash" command does not work with MKS Robin
# boards. After running "make", run the following command:
# ./scripts/update_mks_robin.py out/klipper.bin out/Robin_nano.bin
# ./scripts/update_mks_robin.py out/klipper.bin out/Robin_mini.bin
# Copy the file out/Robin_nano.bin to an SD card and then restart the
# printer with that SD card.

View File

@ -0,0 +1,104 @@
# This file contains common configurations and pin mappings
# for the Flsun QQ-S using the MKS Robin Mini board.
#
# To use this config, the firmware should be compiled for the
# STM32F103. When running "make menuconfig", enable "extra low-level
# configuration setup", select the 28KiB bootloader, and serial (on
# USART3 PB11/PB10) communication.
# Note that the "make flash" command does not work with MKS Robin
# boards. After running "make", run the following command:
# ./scripts/update_mks_robin.py out/klipper.bin out/Robin_mini.bin
# Copy the file out/Robin_mini.bin to an SD card and then restart the
# printer with that SD card.
# For more detailed instructions on how to set Klipper up for this printer,
# follow this guide: https://github.com/CobraPi/Klipper-Firmware-FLSUN-QQ-S-Pro
# See docs/Config_Reference.md for a description of parameters.
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
restart_method: command
[printer]
kinematics: delta
max_velocity: 500
max_accel: 3000
max_z_velocity: 200
delta_radius: 130
print_radius: 125
[stepper_a]
step_pin: PE3
dir_pin: PE2
enable_pin: !PE4
rotation_distance: 32
endstop_pin: PA15
microsteps: 16
homing_speed: 60
position_endstop: 370
arm_length: 280.0
[stepper_b]
step_pin: PE0
dir_pin: PB9
enable_pin: !PE1
rotation_distance: 32
endstop_pin: PA12
microsteps: 16
[stepper_c]
step_pin: PB5
dir_pin: PB4
enable_pin: !PB8
rotation_distance: 32
endstop_pin: PC4
microsteps: 16
[probe]
pin: !PA11
x_offset: 0
y_offset: 0
z_offset: 18
samples: 3
samples_result: average
sample_retract_dist: 5
samples_tolerance: 0.02
samples_tolerance_retries: 5
[delta_calibrate]
radius: 125
horizontal_move_z: 25
[extruder]
step_pin: PD6
dir_pin: !PD3
enable_pin: !PB3
rotation_distance: 9
microsteps: 16
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC3
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC1
control: pid
pid_Kp: 14.529
pid_Ki: 0.557
pid_Kd: 94.802
min_temp: 0
max_temp: 260
[heater_bed]
heater_pin: PA0
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC0
control: pid
pid_Kp: 325.10
pid_Ki: 63.35
pid_Kd: 417.10
min_temp: 0
max_temp: 150
[fan]
pin: PB1

View File

@ -156,6 +156,7 @@ CONFIG ../../config/printer-creality-ender3max-2021.cfg
CONFIG ../../config/printer-creality-ender3pro-2020.cfg
CONFIG ../../config/printer-creality-ender6-2020.cfg
CONFIG ../../config/printer-flsun-q5-2020.cfg
CONFIG ../../config/printer-flsun-qqs-2020.cfg
CONFIG ../../config/printer-fokoos-odin5-f3-2021.cfg
CONFIG ../../config/printer-tronxy-x5sa-v6-2019.cfg
CONFIG ../../config/printer-tronxy-x5sa-pro-2020.cfg