Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
klipper-dgus/config/printer-tevo-tarantula-pro-...

98 lines
1.7 KiB
INI
Raw Normal View History

config: Tarantula Pro - Multiple tweaks and description change (#3230) The following parameters have been tweaked: - X endstop position has been set to -2, as per original marlin cofig - Second Z axis disabled by default (this must be purchased as an add-on) The comment at the top of this file has also been modified to describe the difference between this (old) model and the new (rebranded) Tevo Tarantula pro. Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-25 00:23:50 +02:00
# Support for the green Tevo Tarantula Pro. To use this config, the firmware
# should be compiled for the AVR atmega2560.
# Note that this config file is for the "old green" Tarantula pro, with a
# MKS Gen_l 8-bit board.
# It _will not_ work out of the box for the "new orange" Tarantula pro with a
# MKS Sgen_l 32-bit board.
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 14:35:01 +02:00
docs: Move config reference information to new Config_Reference.md Move all the config reference information from files in the config/ directory to a new Config_Reference.md document. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-17 00:47:32 +01:00
# See docs/Config_Reference.md for a description of parameters.
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 14:35:01 +02:00
[stepper_x]
step_pin: ar54
dir_pin: !ar55
enable_pin: !ar38
step_distance: 0.012583
endstop_pin: ^!ar3
config: Tarantula Pro - Multiple tweaks and description change (#3230) The following parameters have been tweaked: - X endstop position has been set to -2, as per original marlin cofig - Second Z axis disabled by default (this must be purchased as an add-on) The comment at the top of this file has also been modified to describe the difference between this (old) model and the new (rebranded) Tevo Tarantula pro. Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-25 00:23:50 +02:00
position_endstop: -2
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 14:35:01 +02:00
position_max: 220
config: Tarantula Pro - Multiple tweaks and description change (#3230) The following parameters have been tweaked: - X endstop position has been set to -2, as per original marlin cofig - Second Z axis disabled by default (this must be purchased as an add-on) The comment at the top of this file has also been modified to describe the difference between this (old) model and the new (rebranded) Tevo Tarantula pro. Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-25 00:23:50 +02:00
position_min: -2
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 14:35:01 +02:00
homing_speed: 25.0
[stepper_y]
step_pin: ar60
dir_pin: ar61
enable_pin: !ar56
step_distance: 0.01256
endstop_pin: ^!ar14
position_endstop: 0
position_max: 220
config: Tarantula Pro - Multiple tweaks and description change (#3230) The following parameters have been tweaked: - X endstop position has been set to -2, as per original marlin cofig - Second Z axis disabled by default (this must be purchased as an add-on) The comment at the top of this file has also been modified to describe the difference between this (old) model and the new (rebranded) Tevo Tarantula pro. Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-25 00:23:50 +02:00
homing_speed: 25.0
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 14:35:01 +02:00
[stepper_z]
step_pin: ar46
dir_pin: ar48
enable_pin: !ar62
step_distance: 0.002492
endstop_pin: ^!ar18
position_endstop: 0
position_max: 200
config: Tarantula Pro - Multiple tweaks and description change (#3230) The following parameters have been tweaked: - X endstop position has been set to -2, as per original marlin cofig - Second Z axis disabled by default (this must be purchased as an add-on) The comment at the top of this file has also been modified to describe the difference between this (old) model and the new (rebranded) Tevo Tarantula pro. Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-25 00:23:50 +02:00
# Enable for dual-z addon
#[stepper_z1]
#step_pin: ar36
#dir_pin: ar34
#enable_pin: !ar30
#step_distance: 0.002492
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
2020-08-23 14:35:01 +02:00
[extruder]
step_pin: ar26
dir_pin: ar28
enable_pin: !ar24
step_distance: 0.002470
nozzle_diameter: 0.400
filament_diameter: 1.75
heater_pin: ar10
sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog13
control: pid
pid_Kp: 22.5
pid_Ki: 1.78
pid_Kd: 74.16
min_temp: 0
max_temp: 220
[heater_bed]
heater_pin: ar8
sensor_type: EPCOS 100K B57560G104F
sensor_pin: analog14
control: watermark
min_temp: 0
max_temp: 110
[fan]
pin: ar9
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
pin_map: arduino
[printer]
kinematics: cartesian
max_velocity: 400
max_accel: 3000
max_z_velocity: 50
max_z_accel: 100
[heater_fan nozzle_fan]
pin: ar7
[display]
lcd_type: uc1701
cs_pin: ar25
a0_pin: ar27
encoder_pins: ^!ar31, ^!ar33
click_pin: ^!ar35
kill_pin: !ar41
menu_reverse_navigation: true