Mirror
/
klipper-dgus
mirror of https://github.com/Desuuuu/klipper.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
klipper-dgus/config/printer-mtw-create-2015.cfg

154 lines
2.9 KiB
INI
Raw Permalink Normal View History

config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
# This file contains pin mappings for the MTW Create (circa 2015). To
# use this config, the firmware should be compiled for the AVR
# atmega2560.
docs: Move config reference information to new Config_Reference.md Move all the config reference information from files in the config/ directory to a new Config_Reference.md document. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-11-17 00:47:32 +01:00
# See docs/Config_Reference.md for a description of parameters.
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
[stepper_x]
step_pin: PC0
dir_pin: !PL1
enable_pin: !PA7
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 32
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
endstop_pin: ^PB6
#endstop_pin: ^PA2
position_endstop: 0
position_max: 250
homing_speed: 50
[stepper_y]
step_pin: PC1
dir_pin: PL0
enable_pin: !PA6
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 32
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
endstop_pin: ^PB5
#endstop_pin: ^PA1
position_endstop: 0
position_max: 320
homing_speed: 50
[stepper_z]
step_pin: PC2
dir_pin: PL2
enable_pin: !PA5
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 4
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
endstop_pin: probe:z_virtual_endstop
#endstop_pin: ^PC7
manual_probe: Use configfile note_valid=False when inspecting Z position_endstop Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 16:18:39 +01:00
#position_endstop: 0.5
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
position_max: 225
[extruder]
step_pin: PC3
dir_pin: PL6
enable_pin: !PA4
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
microsteps: 16
rotation_distance: 32.640
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PH6
sensor_type: ATC Semitec 104GT-2
sensor_pin: PF0
control: pid
pid_Kp: 22.2
pid_Ki: 1.08
pid_Kd: 114
min_temp: 0
max_temp: 275
#Uncomment below for dual extruder printers
#[extruder1]
#step_pin: PC4
#dir_pin: PL7
#enable_pin: !PA3
#heater_pin: PH4
#sensor_pin: PF1
config: Update example configs to use rotation_distance Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-14 15:09:19 +01:00
#microsteps: 16
#rotation_distance: 32.640
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
#nozzle_diameter: 0.400
#filament_diameter: 1.750
#sensor_type: ATC Semitec 104GT-2
#sensor_pin: PF0
#control: pid
#pid_Kp: 22.2
#pid_Ki: 1.08
#pid_Kd: 114
#min_temp: 0
#max_temp: 275
[heater_bed]
heater_pin: PE5
temperature_sensors: Deprecate "NTC 100K beta 3950" thermistor It seems the common "beta 3950" thermistors generally follow a temperature table defined by the new "Generic 3950" definition. Using a table that actually follows the "beta 3950" temperature curve is generally less accurate. Deprecate the existing "NTC 100K beta 3950" definition to avoid this common issue. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-11-01 18:54:11 +01:00
sensor_type: Generic 3950
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
sensor_pin: PF2
control: watermark
min_temp: 0
max_temp: 130
[bltouch]
sensor_pin: PB4
control_pin: PL5
x_offset: -17
y_offset: 37
z_offset: 2.0
[safe_z_home]
docs: Docs comma culture (#4822) Many non-English speaking countries use a comma as a decimal separator for printed numbers. This can create some confusion in documentation and config files when not surrounded by contextual clues like parenthesis. Improve documentation by adding spaces to coordinates. Signed-off-by: Paul McGowan <mental450@gmail.com>
2022-01-10 03:13:53 +01:00
home_xy_position: 125, 150
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
z_hop: 10
z_hop_speed: 5
[bed_mesh]
docs: Docs comma culture (#4822) Many non-English speaking countries use a comma as a decimal separator for printed numbers. This can create some confusion in documentation and config files when not surrounded by contextual clues like parenthesis. Improve documentation by adding spaces to coordinates. Signed-off-by: Paul McGowan <mental450@gmail.com>
2022-01-10 03:13:53 +01:00
mesh_min: 5, 5
mesh_max: 225, 225
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
[fan]
pin: PH5
config: Change of alias for heater_fan in multiple configs (#5632) This PR serves to fix a longstanding misnomer in some config files. Many configs state a nozzle_cooling_fan alias for what is usually a "hotend cooling fan". This causes ambiguity and confusion with the parts fan. I have identified all 24 files with this and changed them here. Signed-off-by: James Hartley <james@hartleyns.com>
2022-07-19 19:02:51 +02:00
[heater_fan heatbreak_cooling_fan]
config: Add example printer-mtw-create-2015.cfg config file Signed-off-by: Mike Payson <mike@mtw3d.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-12-01 22:31:55 +01:00
pin: PH3
[mcu]
serial: /dev/serial/by-id/usb-UltiMachine__ultimachine.com__RAMBo_854333433343516051F1-if00
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
[ad5206 stepper_digipot]
enable_pin: PD7
scale: 2.08
# Channel 1 is E0, 2 is E1, 3 is unused, 4 is Z, 5 is X, 6 is Y
channel_1: 1.34
channel_2: 1.0
channel_4: 1.1
channel_5: 1.1
channel_6: 1.1
# Enable 16 micro-steps on steppers X, Y, Z, E0, E1
[static_digital_output stepper_config]
pins:
PG1, PG0,
PK7, PG2,
PK6, PK5,
PK3, PK4,
PK1, PK2
[static_digital_output yellow_led]
pins: !PB7
# Common EXP1 / EXP2 (display) pins
[board_pins]
aliases:
# Common EXP1/EXP2 headers found on RAMBo v1.4
EXP1_1=PE6, EXP1_3=PG3, EXP1_5=PJ2, EXP1_7=PJ7, EXP1_9=<GND>,
EXP1_2=PE2, EXP1_4=PG4, EXP1_6=PJ3, EXP1_8=PJ4, EXP1_10=<5V>,
# EXP2 header
EXP2_1=PB3, EXP2_3=PJ5, EXP2_5=PJ6, EXP2_7=PD4, EXP2_9=<GND>,
EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PE7, EXP2_10=PH2
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
# See the sample-lcd.cfg file for definitions of common LCD displays.