Rokin
/
vcore-slicers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

last change

This commit is contained in:
Rokin 2023-06-20 17:05:29 +02:00
parent b9f8b03236
commit 7a3ad6beea
2 changed files with 13 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
PrusaSlicer_2.5.0/filament/PLA.ini
View File

@ -1,5 +1,5 @@
# generated by PrusaSlicer 2.5.0 on 2023-01-13 at 12:33:34 UTC
bed_temperature = 60
# generated by PrusaSlicer 2.5.2 on 2023-06-20 at 11:50:02 UTC
bed_temperature = 58
bridge_fan_speed = 80
compatible_printers =
compatible_printers_condition =
@ -8,7 +8,7 @@ compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 0.9
extrusion_multiplier = 0.964
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #1C71D8
@ -17,7 +17,7 @@ filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 14
filament_density = 1.24
filament_deretract_speed = 60
filament_deretract_speed = 35
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
@ -29,12 +29,12 @@ filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0|
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = 0.8
filament_retract_length = 0.75
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 60
filament_retract_speed = 40
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
@ -45,13 +45,13 @@ filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Generic
filament_wipe = nil
first_layer_bed_temperature = 60
first_layer_temperature = 212
first_layer_bed_temperature = 58
first_layer_temperature = 205
full_fan_speed_layer = 4
inherits =
max_fan_speed = 100
min_fan_speed = 70
min_print_speed = 30
slowdown_below_layer_time = 3
start_filament_gcode = "; Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.07\n{if filament_retract_length[current_extruder]> 0}SET_RETRACTION RETRACT_LENGTH=[filament_retract_length]{endif}\n{if filament_retract_speed[current_extruder] > 0}SET_RETRACTION RETRACT_SPEED=[filament_retract_speed]{endif}\n{if filament_deretract_speed[current_extruder] > 0}SET_RETRACTION UNRETRACT_SPEED=[filament_deretract_speed]{endif}\n{if filament_retract_restart_extra[current_extruder] > 0}SET_RETRACTION UNRETRACT_EXTRA_LENGTH=[filament_retract_restart_extra]{endif}\n"
temperature = 210
slowdown_below_layer_time = 7
start_filament_gcode = "; Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.078\n{if filament_retract_length[current_extruder]> 0}SET_RETRACTION RETRACT_LENGTH=[filament_retract_length]{endif}\n{if filament_retract_speed[current_extruder] > 0}SET_RETRACTION RETRACT_SPEED=[filament_retract_speed]{endif}\n{if filament_deretract_speed[current_extruder] > 0}SET_RETRACTION UNRETRACT_SPEED=[filament_deretract_speed]{endif}\n{if filament_retract_restart_extra[current_extruder] > 0}SET_RETRACTION UNRETRACT_EXTRA_LENGTH=[filament_retract_restart_extra]{endif}\n"
temperature = 198

4
PrusaSlicer_2.5.0/print/0.24 - Sport (0.4).ini
View File

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.5.0 on 2023-01-18 at 13:29:51 UTC
# generated by PrusaSlicer 2.5.0 on 2023-01-21 at 12:09:05 UTC
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
@ -20,7 +20,7 @@ dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0.1
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0.44
external_perimeter_extrusion_width = 0.48
external_perimeter_speed = 160
external_perimeters_first = 0
extra_perimeters = 1