The class names need to be renamed even if we are not about to run
puppet ourselves; otherwise, deployments which rely on running puppet
themselves will still have the wrong class names.
These are respected by `urllib`, and thus also `requests`. We set
`HTTP_proxy`, not `HTTP_PROXY`, because the latter is ignored in
situations which might be running under CGI -- in such cases it may be
coming from the `Proxy:` header in the request.
Using `config_file.write()` only writes out what python stored of the
file; as such, it strips all comments and whitespace.
Use `crudini --set`, which only modifies the line whose contents are
changed.
There is only one PostgreSQL database; the "appdb" is irrelevant.
Also use "postgresql," as it is the name of the software, whereas
"postgres" the name of the binary and colloquial name. This is minor
cleanup, but enabled by the other renames in the previous commit.
The "voyager" name is non-intuitive and not significant.
`zulip::voyager` and `zulip::dockervoyager` stubs are kept for
back-compatibility with existing `zulip.conf` files.
This moves the puppet configuration closer to the "roles and profiles
method"[1] which is suggested for organizing puppet classes. Notably,
here it makes clear which classes are meant to be able to stand alone
as deployments.
Shims are left behind at the previous names, for compatibility with
existing `zulip.conf` files when upgrading.
[1] https://puppet.com/docs/pe/2019.8/the_roles_and_profiles_method
Fingerprinting the config is somewhat brittle -- it requires either
custom bootstrapping for old (fingerprint-less) configs, and may have
false-positives.
Since generating the config is lightweight, do so into the .tmp files,
and compare the output to the originals to determine if there are
changes to apply.
In order to both surface errors, as well as notify the user in case a
restart is necessary, we must run it twice. The `onlyif`
functionality cannot show configuration errors to the user, only
determine if the command runs or not. We thus run the command once,
judging errors as "interesting" enough to run the actual command,
whose failure will be verbose in Puppet and halt any steps that depend
on it.
Removing the `onlyif` would result in `stage_updated_sharding` showing
up in the output of every Puppet run, which obscures the important
messages it displays when an update to sharding is necessary.
Removing the `command` (e.g. making it an `echo`) would result in
removing the ability to report configuration errors. We thus have no
choice but to run it twice; this is thankfully low-overhead.
The reason higher expected_time_to_clear_backlog were allowed for queues
during "bursts" was, in simpler terms, because those queues to which
this happens, intrinsically have a higher acceptable "time until cleared"
for new events. E.g. digests_email, where it's completely fine to take a
long time to send them out after putting in the queue. And that's
already configurable without a normal/burst distinction.
Thanks to this we can remove a bunch of overly complicated, and
ultimately useless, logic.
The race condition is described in the comment block removed by this
commit. This leaves room for another, remaining race condition
that should be virtually impossible, but nevertheless it seems
worthwhile to have it documented in the code, so we put a new comment
describing it.
As a final note, this is not a new race condition,
it was hypothetically possible with the old code as well.
We can compute the intended number of processes from the sharding
configuration. In doing so, also validate that all of the ports are
contiguous.
This removes a discrepancy between `scripts/lib/sharding.py` and other
parts of the codebase about if merely having a `[tornado_sharding]`
section is sufficient to enable sharding. Having behaviour which
changes merely based on if an empty section exists is surprising.
This does require that a (presumably empty) `9800` configuration line
exist, but making that default explicit is useful.
After this commit, configuring sharding can be done by adding to
`zulip.conf`:
```
[tornado_sharding]
9800 = # default
9801 = other_realm
```
Followed by running `./scripts/refresh-sharding-and-restart`.
This supports running puppet to pick up new sharding changes, which
will warn of the need to finalize them via
`refresh-sharding-and-restart`, or simply running that directly.
The value in the stats file can get outdated if the queue hasn't done
enough iterations to update the stats file for a while. The queue size
output by rabbitmqctl list_queues is more up to date, and empirically
tends to agree with the value in the stats file (when the stats file is
fresh).
This will let PyYAML link against LibYAML when PyYAML is next
installed. Due to virtualenv-clone, that won’t happen until the next
Python package removal anyway, so we don’t bother bumping
PROVISION_VERSION.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The combination of `--force --noop` is potentially confusing, but
currently `--noop` makes no sense without `--force`, as it will prompt
and then not make changes.
Make `--noop` skip the prompt as well.
Fixes#12868.
We now also include python version in the format
'major.minor.patchlevel', when generating hash for a
requirement file. This was necessary since packages tend to
break on different versions of python, so it is important to
track the version on which the venv was setup.
WARN: This commit will force all zulip venvs to be recreated.
We were already using packages names along with their versions
to generate hash for the requirement file, as we were passing
the `.txt` files to the hash_reqs file instead of intended `.in` files
for which the functions in this file was originially designed.
Changed the expand_reqs_helper function to adapt for the `.txt` files.
Although mktemp is deprecated due to security issues, this is not a
security issue.
The security problems with mktemp happen when you open the resulting
filename (without O_EXCL) in a publicly writable directory, because
then someone else might have predicted the filename and created or
symlinked or hardlinked something there between the mktemp and the
open, causing you to write to a file you didn’t expect.
Here we don’t open the resulting filename, we symlink to it. symlink
will refuse to clobber an existing file, and we handle the error that
arises from this case. This is the normal way to atomically create a
symlink.
We should still replace mktemp because it’s deprecated, but we can’t
replace it with a function that creates the temporary file. Instead
we build a random filename ourselves.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Otherwise, the useradd command will fail during the DigitalOcean
1-Click App installation because the install script is called
twice during the whole process. Plus the Zulip install script
is designed to be idempotent and this bug compromises that.
The value is a holdover from when it controlled runtime behavior,
which it no longer does.
Stop taking a DEPLOYMENT_TYPE, which is unused; the python code only
care about if the option exists, not its value.
These are more correct to the sense of "is this a service we
configured for Zulip", and removes potential confusion around the 0/1
values being backwards from how binary is usually interpreted.
Using checks of `,$PUPPET_CLASSES,` is repetitive and error-prone; it
does not properly deal with `zulip_ops::` classes, for instance, which
include the `zulip::` classes.
As alluded to in ca9d27175b, this can be fixed by inspecting the
classes that would be applied, using `puppet --write-catalog-summary`.
We work around the chicken-and-egg problem alluded to therein by
writing out as complete `zulip.conf` as would be necessary, before
running puppet and removing the sections we then know to not be
needed.
Unfortunately, there are two checks for `$PUPPET_CLASSES` which cannot
be switched to this technique, as they concern errors that we wish to
catch quite early, and thus before we have puppet installed. Since we
expect failures of those to only concern warnings, and only be
mistakenly omitted for internal `zulip_ops::` classes, this seems a
reasonable risk to admit in exchange for catching common errors early.
When supervisor is first installed, it is started automatically, and
creates the socket, owned by root. Subsequent reconfiguration in
puppet only calls `reread + update`, which is insufficient to apply
the `chown = zulip:zulip` line in `supervisord.conf`, leaving the
socket owned by `root` and the last part of the installation unable to
restart `supervisor` services as the `zulip` user. The `chown` line
in `scripts/lib/install` exists to paper over this.
Add a separate exec target for changes to `supervisord.conf` itself,
which restarts the full service. This leaves the default `restart`
action on the service for the lightweight `reread + update` action,
which is more common.
We use `systemctl` only on redhat-esque builds, because CI runs
Ubuntu, but init is not systemd in that context. `systemctl reload`
is sufficient to re-apply the socket ownership, but a full `restart`
and not `reload` is necessary under `/etc/init.d/supervisor`.
49a7a66004 and immediately previous commits began installing
PostgreSQL 12 from their apt repository. On machines which already
have the distribution-provided version of PostgreSQL installed,
however, this leads to failure to apply puppet when restarting
PostgreSQL 12, as both attempt to claim the same port.
During installation, if we will be installing PostgreSQL, look for
other versions than what we will install, and abort if they are
found. This is safer than attempting to automatically uninstall or
reconfigure existing databases.
This allows for installing from-scratch with a different pinned
version of PostgreSQL, and provides a single place to change when the
default should increase.
Using `/etc/init.d/postgresql` as the detection of if Postgres is on
the server is incorrect, because this line runs _before_ puppet and
any packages are installed. Thus, it cannot tell the difference
between a new Ubuntu one-host first-time-install without PostgreSQL
yet, and one which is merely a front-end and will never have
PostgreSQL. This leads to failures in first-time installs:
```
Error: Evaluation Error: Error while evaluating a Function Call,
Could not find template 'zulip/postgresql//postgresql.conf.template.erb'
```
The only way to detect if PostgreSQL will be present in the _end_
state of the install is to examine the puppet classes that are
applied.
To do this, we must inspect `PUPPET_CLASSES`. Unfortunately, this can
be fragile to subclassing (e.g. `zulip_ops::postgres_appdb`). We
might desire to use `puppet apply --write-catalog-summary` to deduce
the _applied_ classes, which would unroll the inheritance; however,
this causes a chicken-and-egg problem, because `zulip.conf` must be
already written out (including a value for `postgresql.version`, if
necessary!) before such a puppet run could successfully complete.
Switch to predicating the `postgresql.version` key on the puppet
classes that are known to install postgres.
Support for Xenial and Stretch was removed (5154ddafca, 0f4b1076ad,
8944e0ad53, 79acd5ae40, 1219a2e854), but not all codepaths were
updated to remove their conditionals on it.
Remove all code predicated on Xenial or Stretch. debathena support
was migrated to Bionic, since that appears to be the current state of
existing debathena servers.
0f4b1076ad removed Ubuntu 16.04 "xenial" and Debian 9 "stretch" from
the printed list of supported operating systems, but left them in the
verification check that controls if that message is printed,
effectively continuing to support them.
Conversely, 439f0d3004 added Ubuntu 20.04 "focal" to the check, but
not to the printed list.
Synchronize to check and print the right supported distributions:
Ubuntu 18.04 "bionic", Ubuntu 20.04 "focal", and Debian 10 "buster".
The previous commit removed the only behavior difference between the
two flags; both of them skip user/database creation, and the tables
therein.
Of the two options `--no-init-db` is more explicit as to what it does,
as opposed to just one facet of when it might be used; remove
`--remote-postgres`.
Since `--postgres-missing-dictionaries` edits `/etc/zulip/zulip.conf`,
it interferes with the intent of `--no-overwrite-settings`.
Make the two settings conflict, to prevent this unclear state.
The `--no-init-db` option previously only controlled if
`initialize-database` was run, which sets up the tables inside the
database. If PostgreSQL was installed locally, it still attempted to
create the user and empty database.
This fails on hosts which are remote PostgreSQL hosts, and not
application hosts, as:
- They may already have a local database, and while
`initialize-datbase` will detect and offer to abort if one is
found,`--no-init-db` seems like it should be the option to not
overwrite it
- `flush-memcached` requires that a local venv be installed, which it
often is not on non-frontend machines.
Skip the database configuration when run with `--no-init-db`.
Since we now support Postgres versions from 10 to 12, we might as well
have new installations start on Postgres 12 to avoid unnecessary
migration/upgrade work.
We would prefer to use the postgres packages from Postgres themselves,
if available. However, this requires ensures that, for existing
installs, we preserve the same version of postgres as their base
distribution installed.
Move the version-determination logic from being computed at puppet
interpolation time, to being computed at install time and pinned into
zulip.conf.
These files can’t use f-strings yet because they need to run in Python
2 or Python 3.5.
Generated by pyupgrade.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Generated by pyupgrade --py36-plus --keep-percent-format.
Now including %d, %i, %u, and multi-line strings.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Anders Kaseorg
Tim Abbott
Alex Vandiver
Mateusz Mandera
Aman
Aman Agrawal
Vishnu KS