ES and TypeScript modules are strict by default and don’t need this
directive. ESLint will remind us to add it to new CommonJS files and
remove it from ES and TypeScript modules.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Note that require("moment") and require("moment-timezone") resolve to
the same thing, but the latter adds timezone support as a side effect.
So I went with the latter in every file where .tz is used.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This just lets us temporarily assign a value
to a field.
Differences with the "override" scheme:
* override only works on globals
* override (when passed in via run_test) will
just automatically clean up at the end of
the function
This is a pretty straightforward conversion.
The bulk of the diff is just changing emoji.js
to ES6 syntax.
There is one little todo that can be deferred
to the next commit--we are now set up to have
markdown.js require emoji.js directly, since
it is no longer on `window`.
We now show before/after, and we don't complicate
our other test that runs in a big loop.
And we take advantage of function injection to
not have to hack into the "real" emoji_codes
structure.
Note that we're simulating the missing emojis
at a slightly higher level, but we already had test
coverage that emoji.get_emoji_name returns
undefined for unknown codepoints.
Zulip converts :) to the 1F642 Unicode emoji and promotes the same emoji
in the popular section of the emoji picker.
Previously Zulip has labeled 1F642 as "slight smile". While that name
conforms to the Unicode standard (which describes the code point as
SLIGHTLY SMILING FACE), it didn't match our use case of the emoji.
If a user types :) or selects the first smile in the emoji picker they
probably mean to express a regular "smile" and not a "slight smile",
which raises the question why they are only smiling slightly.
This commit relabels 1F642 as 😄 and our previous 😄 263A as
:smiling_face:. Note that 263A looks different in our three supported
emoji sets, so it is not suited to be our "default smile".
This change does not require a migration since our emoji system stores
both unicode points and names and handles name changes transparently.
Prettier would do this anyway, but it’s separated out for a more
reviewable diff. Generated by ESLint.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This particular commit has been a long time coming. For reference,
!avatar(email) was an undocumented syntax that simply rendered an
inline 50px avatar for a user in a message, essentially allowing
you to create a user pill like:
`!avatar(alice@example.com) Alice: hey!`
---
Reimplementation
If we decide to reimplement this or a similar feature in the future,
we could use something like `<avatar:userid>` syntax which is more
in line with creating links in markdown. Even then, it would not be
a good idea to add this instead of supporting inline images directly.
Since any usecases of such a syntax are in automation, we do not need
to make it userfriendly and something like the following is a better
implementation that doesn't need a custom syntax:
` Alice: hey!`
---
History
We initially added this syntax back in 2012 and it was 'deprecated'
from the get go. Here's what the original commit had to say about
the new syntax:
> We'll use this internally for the commit bot. We might eventually
> disable it for external users.
We eventually did start using this for our github integrations in 2013
but since then, those integrations have been neglected in favor of
our GitHub webhooks which do not use this syntax.
When we copied `!gravatar` to add the `!avatar` syntax, we also noted
that we want to deprecate the `!gravatar` syntax entirely - in 2013!
Since then, we haven't advertised either of these syntaxes anywhere
in our docs, and the only two places where this syntax remains is
our game bots that could easily do without these, and the git commit
integration that we have deprecated anyway.
We do not have any evidence of someone asking about this syntax on
chat.zulip.org when developing an integration and rightfully so- only
the people who work on Zulip (and specifically, markdown) are likely
to stumble upon it and try it out.
This is also the only peice of code due to which we had to look up
emails -> userid mapping in our backend markdown. By removing this,
we entirely remove the backend markdown's dependency on user emails
to render messages.
---
Relevant commits:
- Oct 2012, Initial commit c31462c278
- Nov 2013, Update commit bot 968c393826
- Nov 2013, Add avatar syntax 761c0a0266
- Sep 2017, Avoid email use c3032a7fe8
- Apr 2019, Remove from webhook 674fcfcce1
This adds support for syntax like: !time(Jun 7 2017, 6:30 PM) so that
everyone sees the time in their own local timezone. This can be used
when scheduling online meetings, etc.
This adds some hardcoded values for timezones, because of there
being no sureshot way of determining the timezone easily. However,
since the main way of using the feature should be a typeahead for
entering the time, this shouldn't be cause of much concern.
Fixes#5176.
This setting is being overridden by the frontend since the last
commit, and the security model is clearer and more robust if we don't
make it appear as though the markdown processor is handling this
issue.
Co-authored-by: Tim Abbott <tabbott@zulipchat.com>
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Explicitly stubbing i18n in 48 different files
is mostly busy work at this point, and it doesn't
provide much signal, since often it's invoked
only to satisfy transitive dependencies.
This refactoring is the first step toward sharing
our markdown code with mobile. This focuses on
the Zulip layer, not the underlying third party `marked`
library.
In this commit we do a one-time initialization to
wire up the markdown functions, but after further
discussions with Greg, it might make more sense
to just pass in helpers on every use of markdown
(which is generally only once per sent message).
I'll address that in follow-up commits.
Even though it looks like a pretty invasive change,
you will note that we barely needed to modify the
node tests to make this pass. And we have pretty
decent test coverage here.
All of the places where we used to depend on
other Zulip modules now use helper functions that
any client (e.g. mobile) can configure themselves.
Or course, in the webapp, we configure these from
modules like people/stream_data/hash_util/etc.
Even in places where markdown used to deal directly with
data structures from other modules, we now use functions.
We may revisit this in a future commit, and we might
just pass data directly for certain things.
I decided to keep the helpers data structure completely flat,
so we don't have ugly nested names like
`helpers.emoji.get_emoji_codepoint`. Because of this,
some of the names aren't 1:1, which I think is fine.
For example, we map `user_groups.is_member_of` to
`is_member_of_user_group`.
It's likely that mobile already has different names
for their versions of these functions, so trying for
fake consistency would only help the webapp. In some
cases, I think the webapp functions have names that
could be improved, but we can clean that up in future
commits, and since the names aren't coupled to markdown
itself (i.e. only the config), we will be less
constrained.
It's worth noting that `marked` has an `options`
data structure that it uses for configuration, but
I didn't piggyback onto it, since the `marked`
options are more at the lexing/parsing layer vs.
the app-data layer stuff that our helpers mostly
help with.
Hopefully it's obvious why I just put helpers in
the top-level namespace for the module rather than
passing it around through multiple layers of the
parser.
There were a couple places in markdown where we
were doing awkward `hasOwnProperty` checks for
emoji-related stuff. Now we use the Python
principle of ask-forgiveness-not-permission and
just handle the getters returning falsy data. (It
should be `undefined`, but any falsy value is
unworkable in the places I changed, so I use
the simpler, less brittle form.)
We also break our direct dependency on
`emoji_codes.json` (with some help from the
prior commit).
In one place I rename streamName to stream_name,
fixing up an ancient naming violation that goes
way back to before this code was even extracted
away from echo.js. I didn't bother to split this
out into a separate commit, since 2 of the 4
lines would be immediately re-modified in the
subsequent commit.
Note that we still depend on `fenced_code`
via the global namespace, instead of simply
requiring it directly or injecting it. The
reason I'm postponing any action there is that
we'll have to change things once we move
markdown into a shared library. (The most
likely outcome is that we'll rename/move both files
at the same time and fix the namespace/require
details as part of that commit.)
Also the markdown code still relies on `_` being
available in the global namespace. We aren't
quite ready to share code with mobile yet, but the
underscore dependency should not be problematic,
since mobile already uses underscore to use the
webapp's shared typing_status module.
This name was misleading, because we weren't
actually setting realm_filters (that's what
`page_params.realm_filters = realm_filters`
is for); we were instead updating our
realm filter rules.
These functions were just shims that were
used in the somewhat painful migration from
subject_* to topic_*.
The commit 4572be8c27
fixed it so that the client never needs to
deal with "subject_links".
So now we just go back to simpler code:
message.topic_links = links
links = message.topic_links
Most of this logic is specific to markdown
message processing, so we move the code to
markdown.js.
The only responsibility that we leave with
`emoji.js` is to provide us with a list
of translations (regex and replacement text).
But now `markdown.js` actually (directly) executes
those translations against Zulip messages
as part of its preprocessing.
This should simplify the upcoming mobile conversion.
Instead of mobile needing to duplicate this fairly
complex function, they will just need to pass
us in a list similar to `emoji_translations` inside
of `emoji.js`. That code has a comment that shows
what the data structure looks like.
We now treat util like a leaf module and
use "require" to import it everywhere it's used.
An earlier version of this commit moved
util into our "shared" library, but we
decided to wait on that. Once we're ready
to do that, we should only need to do a
simple search/replace on various
require/zrequire statements plus a small
tweak to one of the custom linter checks.
It turns out we don't really need util.js
for our most immediate code-sharing goal,
which is to reuse our markdown code on
mobile. There's a little bit of cleanup
still remaining to break the dependency,
but it's minor.
The util module still calls the global
blueslip module in one place, but that
code is about to be removed in the next
few commits.
I am pretty confident that once we start
sharing things like the typeahead code
more aggressively, we'll start having
dependencies on util. The module is barely
more than 300 lines long, so we'll probably
just move the whole thing into shared
rather than break it apart. Also, we
can continue to nibble away at the
cruftier parts of the module.
webpack optimizes JSON modules using JSON.parse("{…}"), which is
faster than the normal JavaScript parser.
Update the backend to use emoji_codes.json too instead of the three
separate JSON files.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
We just get the stream_name from the sub struct now.
This mostly affects node tests.
The only place in real code where we called add_sub()
was when we initialized data from the server.
This commit includes a new `stream_post_policy` setting,
by replacing the `is_announcement_only` field from the Stream model,
which is done by mirroring the structure of the existing
`create_stream_policy`.
It includes the necessary schema and database migrations to migrate
the is_announcement_only boolean field to stream_post_policy,
a smallPositiveInteger field similar to many other settings.
This change is done to allow organization administrators to restrict
new members from creating and posting to a stream. However, this does
not affect admins who are new members.
With many tweaks by tabbott to documentation under /help, etc.
Fixes#13616.
This commit was automatically generated by `tools/lint --only=eslint
--fix`, after an `.eslintrc.json` change.
A half dozen files were removed from the changes by tabbott pending
further work to ensure we avoid breaking valuable PRs with merge
conflicts.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Anders Kaseorg
Steve Howell
Gittenburg
Rohitt Vashishtha
Mohit Gupta
Alex Vandiver
clarammdantas
Anders Kaseorg
Steve Howell
Ryan Rehman