These test cases are used to test the cost of stream creation.
Three scenarios of stream creation are covered:
1) create a public stream;
2) create a private stream;
3) create a public stream with announce=true when there is a notification stream.
Fix: #4804.
We've been getting reports from users that our Freshdesk webhook
isn't working correctly. It turns out that the issue had nothing
to do with the webhook implementation itself!
In freshdesk/doc.md, we have a JSON template we ask users to
copy/paste into a textbox in the Freshdesk UI. That JSON template
contains "{{" and "}}" characters which we escaped as Unicode
decimals to prevent clashes with Jinja2 syntax in other parts
of the same template. This worked for a while!
But thanks to the changes introduced as part of the
nested_code_blocks extension, such escaped characters were never
decoded, leading users to copy/paste the same template but with
raw escaped unicode representations of "{{" and "}}" inside. And
that eventually broke our webhook implementation.
This commit makes sure that such characters are properly "unescaped",
just for Freshdesk docs.
We have code to prevent newbies on open realms
from inviting users. This is mostly intended
to hinder spammers. This commit just adds some
test coverage.
Our get_streams_traffic function used to query
all streams in the StreamCount table if you
passed in `None` for `streams`.
Now we require that you pass in a list of
stream_ids.
I don't know how much work this will save
the database, since probably the bulk of
the work is aggregating. If we need to fine
tune DB performance, we could possibly add
`realm` as an argument and add it to the filter.
What we'll immediately get, for large multi-realm
installations, is less data over the wire and
less work for the ORM.
The prior code uses an awkward idiom that
pre-dates the `exists()` function, and it
had an unreachable line of code.
The new version should be faster, since we
don't create a throwaway heavy Django object
or send needless data over the wire.
This functions appears to be redundant to
`access_stream_by_name`. The only
meaningful line of code in the function that we're
removing, the code that raises an error,
appears to be unreachable, despite reasonably
extensive tests.
The only thing the function was restricting
was that the case where the bot's owner was
unsubscribed to a private stream, which
is already locked down in
`access_stream_by_name` calls inside of
`patch_bot_backend`.
This commit increases test coverage
by removing unreachable code.
It's possible this function had
some theoretical value before we
introduced the `require_non_guest_human_user`
decorator to the `patch_bot_backend`
view, since in theory the bot itself
could have subscribed to a stream that
the owner didn't subscribe to. Even
then it's not clear that allowing the
bot to set that as a default stream
would have been harmful, since they
can already access it.
This commit adds some more tests related to patching
a bot's `default_sending_stream`.
Unfortunately, this didn't reach the code that I was
intending to add line coverage to, since checks happen
higher up in the stack, but the test code I added
is probably worthwhile.
We want our methodology for extracting the last message
id to be consistent, particularly in terms of how we
handle edge cases. (I'll concede that the
`bulk_remove_subscriptions` codepath never hits that
corner case in practice, but it's harmless to handle
the theoretical case.)
It may also be nice to have this function show up
clearly in profiling.
This also adds some direct testing to the function.
It's not clear to me why we don't use `latest('id')`
in the implementation, but that's outside the scope
of this commit.
If `TEXT_EMOJISET` is currently selected emojiset then fallback to
`GOOGLE_EMOJISET` for displaying emojis in emoji picker and
composebox typeahead. We should pre-load the spritesheets in`emoji.js`
even in case of text emojiset otherwise on slow networks emoji picker
will appear empty initially.
This de-clutters check_message a bit and also makes
it easy to audit our rules for who can write to a
stream.
Also, this works around a bug with Python where its
optimizations for the `pass` instruction make them
not appear to run and show up as uncovered in
coverage reports.
The timestamp used for new login notifications always used the 12-hour
format. Instead of that, we use now the one preferred by the user, as
reflected in their settings.
The TeamCity webhook plugin supports multiple payload formats that
are customized to be used by different services such as Slack,
Flowdock, etc. We don't support such payloads, so we should ignore
them and stick to parsing only the generic ones. We should also
notify that bot owner about the error.
This fixes an issue where passing a path like `~/exports/foo` would
result in a `~` directory being created and the export/import not
working correctly.
Fixes#10124.
Users in the waiting period category cannot subscribe other users to
a stream. When a user tries to mention another unsubscribed user, a
warning message appears with a subscribe button on it to subscribe
the other user.
This commit removes the subscribe button and changes the warning text
for users in the waiting period category.
Issue: When you created a new organization with /new, the "new login"
emails were emailed. We previously had a hack of adding the
.just_registered property to the user Python object to attempt to
prevent the emails, and checking that in zerver/signals.py. This
commit gets rid of the .just_registered check.
Instead of the .just_registered check, this checks if the user has
joined more than a minute before.
A test test_dont_send_login_emails_for_new_user_registration_logins
already exists.
Tweaked by tabbott to introduce the constant JUST_CREATED_THRESHOLD.
Fixes#10179.
Right now it only has one function, but the function
we removed never really belonged in actions.py, and
now we have better test coverage on actions.py, which
is an important module to get to 100%.
In this commit we fix a bug due to which url preview images for urls
to custom emojis, realm icons or user avatars appeared broken when
such urls would be part of a Zulip message.
This is a preparatory commit to fix a bug in which a user posts
a link of custom emoji, user avatar or realm icon in a Zulip
message.
In this commit we are just adjusting the url generation in the
backend to have the '/user_uploads/' in the encrypted url generated
which the user is supposed to be redirected to and therefore
essentially reaching thumbor with the encrypted url.
This is necessary because 'user_uploads' and 'user_avatars' (or any
other item under 'user_avatars' endpoint) have a different folder
location under the local file storage backend. 'user_uploads'
endpoint's stuff is stored in a 'files' directory whereas stuff
'user_avatars' endpoint's stuff is stored in a 'avatars' directory.
Thumbor needs to know from which directory a particular local file
needs to be retrieved and therefore the zthumbor/loaders.py adds
a prefix location for the directory.
Since in an upcoming commit we are going to add user_avatars
directory location 'avatars' folder as a prefix this preparatory
commit helps simply doing the changes.
The 'last_modified' value in emoji records is
needed for uploading the file to the S3 backend.
We set the same in the function 'import_uploads_s3'.
We also have to remove the keyword 'last_modified'
while building the RealmEmoji dict, as it is not
a field which exists in RealmEmoji objects.
This uses the recently introduced active_mobile_push_notification
flag; messages that have had a mobile push notification sent will have
a removal push notification sent as soon as they are marked as read.
Note that this feature is behind a setting,
SEND_REMOVE_PUSH_NOTIFICATIONS, since the notification format is not
supported by the mobile apps yet, and we want to give a grace period
before we start sending notifications that appear as (null) to
clients. But the tracking logic to maintain the set of message IDs
with an active push notification runs unconditionally.
This is designed with at-least-once semantics; so mobile clients need
to handle the possibility that they receive duplicat requests to
remove a push notification.
We reuse the existing missedmessage_mobile_notifications queue
processor for the work, to avoid materially impacting the latency of
marking messages as read.
Fixes#7459, though we'll need to open a follow-up issue for
using these data on iOS.
Fixes a regression introduced in 23246ff816.
However, we'll be shortly removing this feature, since it's legacy
support for an app that no longer is supported.
Historically, queue_json_publish had a special third argument that was
basically its default mock behavior in the test suite. We've been
migrating away from that model, because it was confusing and resulted
in poor test coverage of our queue worker code paths; this was one of
the last holdouts.
As it turns out, we don't exercise this code path in a way that
impacts tests much; the main downside of this change is a likely small
penalty to performance of the full test suite when sending private
messages.
Following recent testing flakes that were traced down to this not
having been called causing `receiver_is_off_zulip` to depend on test
ordering, it makes sense to centralize this.
I think it should always have been in ZulipTestCase; it appears the
reason it wasn't from the beginning was that originally only
test_events.py interacted with it, and do_test there still needs to
call this directly (because it can be called multiple times within a
single test). And then we did the wrong thing as expanded use of
Tornado event_queue code in tests to more of the codebase.
This prevents these unit tests from accidentally leaking data outside
their boundaries.
Verified using a test that fails after test_events without this change.
Apparently, we weren't calling the proper clear functions inside the
Tornado tests, which resulted in unexpected behavior in other tests
that were relying on the Tornado event queue system being empty.
(In this case, a new test for mobile push notifications that assumed
receiver_is_off_zulip() was always true failed after this was run).
The s3 import code path made a hard assumption about `user_profile_id`
being set (we'd already fixed this in the local uploads code path).
Ideally, it should be, and I've opened #10268 for fixing that, but for
now this is how it needs to work.
Private messages are not supported in Slack-format webhook.
Instead of raising a NotImplementedError, we warn the user
that PM service is not supported by sending a message to the
user.
Added tests for the same.
Fixes#9239
This implements a significant performance optimization for users
clicking the `Private messages` narrow in the Zulip UI, especially for
those users who do not have 50 recent private messages in an
organization with a lot of stream message traffic (because then
previously, postgres needed to scan through a huge amount of history
to find enough private messages).
The database index powering it can also support many other queries we
might want to do in the future to support "recent conversations" type
features.
Fixes#6896.
The previous message was potentially a lot more ambiguous about
whether this was something about presence. "Deactivated" makes it
explicit that some action was taken to deactivate the account.
After the messages have been imported, set the rendered_content of the
messages instead of leaving its value to be 'None'.
This is important to ensure that:
(1) Performance for users is good after completing the import.
(2) The database's full-text indexes have all of the imported messages
(which only happens properly when Message rows have their
rendered_content field edited).
Fixes#9168.
In certain cases we have to load a template directly because it
isn't in Jinja2's recognized template directories. This commit
adds a test to make sure that absolute paths are recognized
if they are pure Markdown files.
Generates ldap_dir based on the mode and the no. of extra users.
It supports three modes, 'a', 'b' and 'c', description for which
can be found in prod_settings_templates.py.
One disadvantage of relying on Jinja2 to load all templates is that it
only searches a finite set of pre-configured template directories.
Unfortunately, that breaks when someone tries to enable a custom
privacy or terms page and has the corresponding template in a
directory outside of Jinja2's recognized directories (for instance, it
won't find `/etc/zulip/terms.md`, the recommended path).
This commit makes it so that render_markdown_path can be more
sensible about pure Markdown files and load templates with
absolute paths directly without relying on Jinja2, if need be.
We now update all test messages to have a pub_date
of "now" in the setUp() function in TestRetentionLib.
We've seen tests flake on query counts before this
patch. It's not certain that the test flaked due
to time-related glitches, but it seems the most
plausible explanation.
The "/stats" command doesn't actually do anything
interesting yet, and it also writes to the message
feed instead of replying directly to the user.
The history of this command was that it was
written during a PyCon sprint. It was mainly intended
as an example for subsequent slash commands. The
ones we built after "/stats" have sort of outgrown
"/stats" and don't follow the original structure
for "/stats". (The "/day", "/ping", and "/settings"
commands were built shortly after.)j
We probably want to ressurect "/stats" fairly soon,
after figuring out some useful stats and refining
the UI.
As you can see from this commit, resurrecting the
code here shouldn't be too difficult, but it
may actually be pretty rare that we just translate
slash commands into fleshed out messages.
Since otp_encrypt_api_key only encrypts API keys, it doesn't require
access to the full UserProfile object to work properly. Now the
parameter it accepts is just the API key.
This is preparatory refactoring for removing the api_key field on
UserProfile.
random_api_key, the function we use to generate random tokens for API
keys, has been moved to zerver/lib/utils.py because it's used in more
parts of the codebase (apart from user creation), and having it in
zerver/lib/create_user.py was prone to cyclic dependencies.
The function has also been renamed to generate_api_key to have an
imperative name, that makes clearer what it does.
Now reading API keys from a user is done with the get_api_key wrapper
method, rather than directly fetching it from the user object.
Also, every place where an action should be done for each API key is now
using get_all_api_keys. This method returns for the moment a single-item
list, containing the specified user's API key.
This commit is the first step towards allowing users have multiple API
keys.
The validate_api_key sentence may look a bit confusing since we are
using webhook_bot's email address but default_bot's API key.
At first sight, and without any context on these tests, it may look like
that's just a typo, but we do want it to be like it is right now because
that way the API key used doesn't correspond to the provided email
address (triggering some untested parts of our backend logic).
Due to copyright issues with potentially displaying Apple emojisets on
non-apple devices, as well as iamcal dropping support for the emojione
emojiset (see https://github.com/iamcal/emoji-data/pull/142), we are
dropping (perhaps temporarily) support for allowing users to switch
emojisets in Zulip.
This commit just hides the feature from the user but leaves most of
the infrastructure in place so that in the future if we decide to
re-enable the support we will not need to redo the infrastructure work
(some JS-side code is deleted, mostly because we'll want to re-add the
feature using the do_settings_change infrastructure anyway).
The most likely emoji set to add is the legacy "blobs" Google emoji
set, since it seems popular with some users.
Tweaked by tabbott to remove some additional JS code and update the
changelog.
Rishi Gupta
zhoufeng1989
Eeshan Garg
Yashashvi Dave
Steve Howell
Puneeth Chaganti
Harshit Bansal
Yago González
Tim Abbott
Shubham Padia
Aditya Bansal
Rhea Parekh
Vishnu Ks