Commit f6d27562fa (#21564) tried to
ensure Chrony is running, which fails in containers where Chrony
doesn’t have permission to update the host clock.
The Debian package should still attempt to start it, and Puppet should
still restart it when chrony.conf is modified.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Since wal-g does not provide binaries for aarch64, build them from
source. While building them from source for arm64 would better ensure
that build process is tested, the build process takes 7min and 700M of
temp files, which is an unacceptable cost; we thus only build on
aarch64.
Since the wal-g build process uses submodules, which are not in the
Github export, we clone the full wal-g repository. Because the
repository is relatively small, we clone it anew on each new version,
rather than attempt to manage the remotes.
Fixes#21070.
The default timeout for `exec` commands in Puppet is 5 minutes[1]. On
slow connections, this may not be sufficient to download larger
downloads, such as the ~135MB golang tarball.
Increase the timeout to 10 minutes; this is a minimum download speed
of is ~225kB/s.
Fixes#21449.
[1]: https://puppet.com/docs/puppet/5.5/types/exec.html#exec-attribute-timeout
This commit adds a cron job which runs every hour to add the users to
full members system group if user is promoted to a full member.
This should ensure that full member status is available no more than
an hour after configuration suggests it should be.
Previously, it was possible to configure `wal-g` backups without
replication enabled; this resulted in only daily backups, not
streaming backups. It was also possible to enable replication without
configuring the `wal-g` backups bucket; this simply failed to work.
Make `wal-g` backups always streaming, and warn loudly if replication
is enabled but `wal-g` is not configured.
It would confuse a future Debian 15.10 release with Ubuntu 15.10, it
relies on the legacy fact $::operatingsystemrelease, the modern fact
$::os provides this information without extra logic, and it’s unused
as of commit 03bffd3938.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Zulip writes a `rabbitmq.config` configuration file which locks down
RabbitMQ to listen only on localhost:5672, as well as the RabbitMQ
distribution port, on localhost:25672.
The "distribution port" is part of Erlang's clustering configuration;
while it is documented that the protocol is fundamentally
insecure ([1], [2]) and can result in remote arbitrary execution of
code, by default the RabbitMQ configuration on Debian and Ubuntu
leaves it publicly accessible, with weak credentials.
The configuration file that Zulip writes, while effective, is only
written _after_ the package has been installed and the service
started, which leaves the port exposed until RabbitMQ or system
restart.
Ensure that rabbitmq's `/etc/rabbitmq/rabbitmq.config` is written
before rabbitmq is installed or starts, and that changes to that file
trigger a restart of the service, such that the ports are only ever
bound to localhost. This does not mitigate existing installs, since
it does not force a rabbitmq restart.
[1] https://www.erlang.org/doc/apps/erts/erl_dist_protocol.html
[2] https://www.erlang.org/doc/reference_manual/distributed.html#distributed-erlang-system
This is required in order to lock down the RabbitMQ port to only
listen on localhost. If the nodename is `rabbit@hostname`, in most
circumstances the hostname will resolve to an external IP, which the
rabbitmq port will not be bound to.
Installs which used `rabbit@hostname`, due to RabbitMQ having been
installed before Zulip, would not have functioned if the host or
RabbitMQ service was restarted, as the localhost restrictions in the
RabbitMQ configuration would have made rabbitmqctl (and Zulip cron
jobs that call it) unable to find the rabbitmq server.
The previous commit ensures that configure-rabbitmq is re-run after
the nodename has changed. However, rabbitmq needs to be stopped
before `rabbitmq-env.conf` is changed; we use an `onlyif` on an `exec`
to print the warning about the node change, and let the subsequent
config change and notify of the service and configure-rabbitmq to
complete the re-configuration.
`/etc/rabbitmq/rabbitmq-env.conf` sets the nodename; anytime the
nodename changes, the backing database changes, and this requires
re-creating the rabbitmq users and permissions.
Trigger this in puppet by running configure-rabbitmq after the file
changes.
The Erlang `epmd` daemon listens on port 4369, and provides
information (without authentication) about which Erlang processes are
listening on what ports. This information is not itself a
vulnerability, but may provide information for remote attackers about
what local Erlang services (such as `rabbitmq-server`) are running,
and where.
`epmd` supports an `ERL_EPMD_ADDRESS` environment variable to limit
which interfaces it binds on. While this environment variable is set
in `/etc/default/rabbitmq-server`, Zulip unfortunately attempts to
start `epmd` using an explicit `exec` block, which ignores those
settings.
Regardless, this lack of `ERL_EPMD_ADDRESS` variable only controls
`epmd`'s startup upon first installation. Upon reboot, there are two
ways in which `epmd` might be started, neither of which respect
`ERL_EPMD_ADDRESS`:
- On Focal, an `epmd` service exists and is activated, which uses
systemd's configuration to choose which interfaces to bind on, and
thus `ERL_EPMD_ADDRESS` is irrelevant.
- On Bionic (and Focal, due to a broken dependency from
`rabbitmq-server` to `epmd@` instead of `epmd`, which may lead to
the explicit `epmd` service losing a race), `epmd` is started by
`rabbitmq-server` when it does not detect a running instance.
Unfortunately, only `/etc/init.d/rabbitmq-server` would respects
`/etc/default/rabbitmq-server` -- and it defers the actual startup
to using systemd, which does not pass the environment variable
down. Thus, `ERL_EPMD_ADDRESS` is also irrelevant here.
We unfortunately cannot limit `epmd` to only listening on localhost,
due to a number of overlapping bugs and limitations:
- Manually starting `epmd` with `-address 127.0.0.1` silently fails
to start on hosts with IPv6 disabled, due to an Erlang bug ([1],
[2]).
- The dependencies of the systemd `rabbitmq-server` service can be
fixed to include the `epmd` service, and systemd can be made to
bind to `127.0.0.1:4369` and pass that socket to `epmd`, bypassing
the above bug. However, the startup of this service is not
guaranteed, because it races with other sources of `epmd` (see
below).
- Any process that runs `rabbitmqctl` results in `epmd` being started
if one is not currently running; these instances do not respect any
environment variables as to which addresses to bind on. This is
also triggered by `service rabbitmq-server status`, as well as
various Zulip cron jobs which inspect the rabbitmq queues. As
such, it is difficult-to-impossible to ensure that some other
`epmd` process will not win the race and open the port on all
interfaces.
Since the only known exposure from leaving port 4369 open is
information that rabbitmq is running on the host, and the complexity
of adjusting this to only bind on localhost is high, we remove the
setting which does not address the problem, and document that the port
is left open, and should be protected via system-level or
network-level firewalls.
[1]: https://bugs.launchpad.net/ubuntu/+source/erlang/+bug/1374109
[2]: https://github.com/erlang/otp/issues/4820
mochiweb was renamed to web_dispatch in RabbitMQ 3.8.0, and the plugin
is not enabled. Nor does this control the management interface, which
would listen on port 15672.
This addresses the problems mentioned in the previous commit, but for
existing installations which have `authenticator = standalone` in
their configurations.
This reconfigures all hostnames in certbot to use the webroot
authenticator, and attempts to force-renew their certificates.
Force-renewal is necessary because certbot contains no way to merely
update the configuration. Let's Encrypt allows for multiple extra
renewals per week, so this is a reasonable cost.
Because the certbot configuration is `configobj`, and not
`configparser`, we have no way to easily parse to determine if webroot
is in use; additionally, `certbot certificates` does not provide this
information. We use `grep`, on the assumption that this will catch
nearly all cases.
It is possible that this will find `authenticator = standalone`
certificates which are managed by Certbot, but not Zulip certificates.
These certificates would also fail to renew while Zulip is running, so
switching them to use the Zulip webroot would still be an improvement.
Fixes#20593.
As a consequence:
• Bump minimum supported Python version to 3.7.
• Move Vagrant environment to Debian 10, which has Python 3.7.
• Move CI frontend tests to Debian 10.
• Move production build test to Debian 10.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Alex Vandiver
Anders Kaseorg
Sahil Batra