Previously, the LDAP code for syncing user data was not
multiple-realm-aware, resulting in errors trying to sync data for an
LDAP user present in multiple realms.
Tweaked by tabbott to add some extended comments.
Fixes#11520.
For a long time, we've been only doing the zxcvbn password strength
checks on the browser, which is helpful, but means users could through
hackery (or a bug in the frontend validation code) manage to set a
too-weak password. We fix this by running our password strength
validation on the backend as well, using python-zxcvbn.
In theory, a bug in python-zxcvbn could result in it producing a
different opinion than the frontend version; if so, it'd be a pretty
bad bug in the library, and hopefully we'd hear about it from users,
report upstream, and get it fixed that way. Alternatively, we can
switch to shelling out to node like we do for KaTeX.
Fixes#6880.
A bug in Zulip's new user signup process meant that users who
registered their account using social authentication (e.g. GitHub or
Google SSO) in an organization that also allows password
authentication could have their personal API key stolen by an
unprivileged attacker, allowing nearly full access to the user's
account.
Zulip versions between 1.7.0 and 2.0.6 were affected.
This commit fixes the original bug and also contains a database
migration to fix any users with corrupt `password` fields in the
database as a result of the bug.
Out of an abundance of caution (and to protect the users of any
installations that delay applying this commit), the migration also
resets the API keys of any users where Zulip's logs cannot prove the
user's API key was not previously stolen via this bug. Resetting
those API keys will be inconvenient for users:
* Users of the Zulip mobile and terminal apps whose API keys are reset
will be logged out and need to login again.
* Users using their personal API keys for any other reason will need
to re-fetch their personal API key.
We discovered this bug internally and don't believe it was disclosed
prior to our publishing it through this commit. Because the algorithm
for determining which users might have been affected is very
conservative, many users who were never at risk will have their API
keys reset by this migration.
To avoid this on self-hosted installations that have always used
e.g. LDAP authentication, we skip resetting API keys on installations
that don't have password authentication enabled. System
administrators on installations that used to have email authentication
enabled, but no longer do, should temporarily enable EmailAuthBackend
before applying this migration.
The migration also records which users had their passwords or API keys
reset in the usual RealmAuditLog table.
This change makes it possible for users to control the notification
settings for wildcard mentions as a separate control from PMs and
direct @-mentions.
This includes adding a new endpoint to the push notification bouncer
interface, and code to call it appropriately after resetting a user's
personal API key.
When we add support for a user having multiple API keys, we may need
to add an additional key here to support removing keys associated with
just one client.
Since years ago, this field hasn't been used for anything other than
some logging that would be better off logging the user ID anyway.
It existed in the first place simply because we weren't passing the
user_profile_id to Tornado at all.
Then, find and fix a predictable number of previous misuses.
With a small change by tabbott to preserve backwards compatibility for
sending `yes` for the `forged` field.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
The original/legacy emoji reactions endpoints made use of HTTP PUT and
didn't have an API that could correctly handle situations where the
emoji names change over time. We stopped using the legacy endpoints
some time ago, so we can remove them now.
This requires straightforward updates to older tests that were still
written against the legacy API.
Fixes#12940.
The function only used the user's realm anyway, so this is a cleaner
API.
This should also make it more convenient to permanently delete
messages manually, since one doesn't have to fetch a random user in
the realm in order to delete a message using the management shell.
No functional change.
When creating realm with the ldap backend, the registration flow didn't
properly handle some things - the user wouldn't be set as realm admin,
initial subscriptions and messages weren't created, and the redirect
wasn't happening properly in the case of subdomains.
The state of the FAKELDAP setup for the dev env has fallen behind the
backend changes and updates to fakeldap (which implemented
SCOPE_ONELEVEL searches), as well as having some other minor issues.
This commit restore it to a working state and now all three config modes
work properly.
django_to_ldap_username is now able to find the correct ldap username in
every supported type of configuration, so we can remove these
conditionals and use django_to_ldap_username in a straight-forward
manner.
Having to account everywhere for both cases of having and not
having email search configured makes things needlessly complicated.
It's better to make the setting obligatory in configurations other than
LDAP_APPEND_DOMAIN.
Previously, we were using user_profile.email rather than
user_profile.delivery_email in all calculations involving Gravatar
URLs, which meant that all organizations with the new
EMAIL_ADDRESS_VISIBILITY_ADMINS setting enabled had useless gravatars
not based on the `user15@host.domain` type fake email addresses we
generate for the API to refer to users.
The fix is to convert these calculations to use the user's
delivery_email. Some refactoring is required to ensure the data is
passed through to the parts of the codebase that do the check;
fortunately, our automated tests of schemas are effective in verifying
that the new `sender_delivery_email` field isn't visible to the API.
Fixes#13369.
Previously, we weren't properly passing through the value of the
client_gravatar flag from the caller, resulting in buggy results if
the caller passed client_gravatar=False to do_test().
We happened to not have any uses of this before, but we're about to
add one.
As discussed in the comment, ideally these checks should be added
completely automatically, rather than needing to be manually added
every time we add a new setting. But hopefully the example code for
all of the similar enums that this provides will at least provide some
help.
By adding some additional plumbing (through PreregistrationUser) of the
full_name and an additional full_name_validated option, we
pre-populate the Full Name field in the registration form when coming
through a social backend (google/github/saml/etc.) and potentially skip
the registration form (if the user would have nothing to do there other
than clicking the Confirm button) and just create the account and log
the user in.
The main purpose of this is to make that name change happen in
/server_settings. external_authentication_methods is a much better, more
descriptive name than social_backends from API perspective.
These are returned through the API, at the /server_settings
endpoint. It's better to just return the list of dicts with a guarantee
of being sorted in the correct order, than to clutter things with the
sort_order field.
This legacy endpoint was designed for the original native Zulip mobile
apps, which were deprecated years ago in favor of the React Native
app.
It was replaced by /server_settings for active use years ago, so it's
safe to remove it now.
The url scheme is now /accounts/login/social/saml/{idp_name} to initiate
login using the IdP configured under "idp_name" name.
display_name and display_logo (the name and icon to show on the "Log in
with" button) can be customized by adding the apprioprate settings in
the configured IdP dictionaries.
This changes the way django_to_ldap_username works to make sure the ldap
username it returns actually has a corresponding ldap entry and raise an
exception if that's not possible. It seems to be a more sound approach
than just having it return its best guess - which was the case so far.
Now there is a guarantee that what it returns is the username of an
actual ldap user.
This allows communicating to the registration flow when the email being
registered doesn't belong to ldap, which then will proceed to register
it via the normal email backend flow - finally fixing the bug where you
couldn't register a non-ldap email even with the email backend enabled.
These changes to the behavior of django_to_ldap_username require small
refactorings in a couple of other functions that call it, as well as
adapting some tests to these changes. Finally, additional tests are
added for the above-mentioned registration flow behavior and some
related corner-cases.
Instead of mocking the _LDAPUser class, these tests can now take
advantage of the test directory that other ldap are using. After these
changes, test_query_email_attr also verifies that query_ldap can
successfully be used to query by user email, if email search is
configured.
Fixes#11878
Instead of a confusing mix of django_auth_backed applying
ldap_to_django_username in its internals for one part of the
translation, and then custom logic for grabbing it from the email
attribute of the ldapuser in ZulipLDAPAuthBackend.get_or_build_user
for the second part of the translation,
we put all the logic in a single function user_email_from_ldapuser
which will be used by get_or_build of both ZulipLDAPUserPopulator and
ZulipLDAPAuthBackend.
This, building on the previous commits with the email search feature,
fixes the ldap sync bug from issue #11878.
If we can get upstream django-auth-ldap to merge
https://github.com/django-auth-ldap/django-auth-ldap/pull/154, we'll
be able to go back to using the version of ldap_to_django_username
that accepts a _LDAPUser object.
With this, django_to_ldap_username can take an email and find the ldap
username of the ldap user who has this email - if email search is
configured.
This allows successful authenticate() with ldap email and ldap password,
instead of ldap username. This is especially useful because when
a user wants to fetch their api key, the server attempts authenticate
with user_profile.email - and this used to fail if the user was an ldap
user (because the ldap username was required to authenticate
succesfully). See issue #9277.
This fixes a collection of bugs surrounding LDAP configurations A and
C (i.e. LDAP_APPEND_DOMAIN=None) with EmailAuthBackend also enabled.
The core problem was that our desired security model in that setting
of requiring LDAP authentication for accounts managed by LDAP was not
implementable without a way to
Now admins can configure an LDAPSearch query that will find if there
are users in LDAP that have the email address and
email_belongs_to_ldap() will take advantage of that - no longer
returning True in response to all requests and thus blocking email
backend authentication.
In the documentation, we describe this as mandatory configuration for
users (and likely will make it so soon in the code) because the
failure modes for this not being configured are confusing.
But making that change is pending work to improve the relevant error
messages.
Fixes#11715.
The value of realm attribute in confirmation object used to be empty
before. We are not currently using the realm attribute of reactivation
links anywhere. The value of realm stored in content_object is currently
used.
We currently have code to calculate the value of realm_icon_url,
admin_emails and default_discount in two diffrent places. With
the addition of showing confirmation links it would become three.
The easiest way to deduplicate the code and make the view cleaner
is by doing the calculations in template. Alternatively one can
write a function that takes users, realms and confirmations as
arguments and sets the value of realm_icon_url, admin_emails and
default_discount appropriately in realm object according to the
type of the confirmation. But that seems more messy than passing
the functions directly to template approach.
Most of the failures were due to parameters that are not intended to
be used by third-party code, so the correct fix for those was the set
intentionally_undocumented=True.
Fixes#12969.
MigrationsTestCase is intentionally omitted from this, since migrations
tests are different in their nature and so whatever setUp()
ZulipTestCase may do in the future, MigrationsTestCase may not
necessarily want to replicate.
Previously, the logic for determining whether to provide an LDAP
password prompt on the registration page was incorrectly including it
if any LDAP authentication was backend enabled, even if LDAP was
configured with the populate-only backend that is not responsible for
authentication (just for filling in name and custom profile fields).
We fix this by correcting the conditional, and add a test.
There's still follow-up work to do here: We may still end up
presenting a registration form in situations where it's useless
because we got all the data from SAML + LDAP. But that's for a future
issue.
This fixes a bug reported in #13275.
This is a follow-up to b69213808a.
We now actually send messages from the notification_bot, which
is the real usecase for this code.
Also, this cleans up the code and removes needless asserts like
`assertNotEqual(zulip_realm, lear_realm)` making the test easier
to read.
A confirmation object is already created when
do_send_confirmation_email is called just above.
Tweaked by tabbott to remove an unnecessary somewhat hacky database
query.
There are a few outstanding issues that we expect to resolve beforce
including this in a release, but this is good checkpoint to merge.
This PR is a collaboration with Tim Abbott.
Fixes#716.
Priviously, we rendered the topic links using the msg.sender.realm.
This resulted in issues with Zulip's internal bots not having access
to the realm_filters of the destination stream's realm. For example,
sending a message via the email gateway or notification would not
linkify any realm filters that a user would expect them to.
Even though required attribute of stream and stream_id params is marked
false in openapi specification, the API expects atleast one of the
params to be set. There is no way to specify relationships like this
openapi and they dont seem to have any plan to implement this in future.
https://github.com/OAI/OpenAPI-Specification/issues/256
One small change in behavior is that this creates an array with all the
row_objects at once, rather than creating them 1000 at a time.
That should be fine, given that the client batches these in units of
10000 anyway, and so we're just creating 10K rows of a relatively
small data structure in Python code here.
Fixes#1727.
With the server down, apply migrations 0245 and 0246. 0246 will remove
the pub_date column, so it's essential that the previous migrations
ran correctly to copy data before running this.
Apparently, our change in b8a1050fc4 to
stop caching responses on API endpoints accidentally ended up
affecting uploaded files as well.
Fix this by explicitly setting a Cache-Control header in our Sendfile
responses, as well as changing our outer API caching code to only set
the never cache headers if the view function didn't explicitly specify
them itself.
This is not directly related to #13088, as that is a similar issue
with the S3 backend.
Thanks to Gert Burger for the report.
This change adds the OpenAPI data needed to document the POST and
DELETE methods associated with this endpoint.
Descriptions edited slightly by tabbott.
Apparently, the Zulip notifications (and resulting emails) were
correct, but the download links inside the Zulip UI were incorrectly
not including S3 prefix on the URL, making them not work.
While we're at this, we rewrite the somewhat convoluted previous
system for formatting the data export output.
When using our EMAIL_ADDRESS_VISIBILITY_ADMINS feature, we were
apparently creating bot users with different email and delivery_email
properties, due to effectively an oversight in how the code was
written (the initial migration handled bots correctly, but not bots
created after the transition).
Following the refactor in the last commit, the fix for this is just
adding the missing conditional, a test, and a database migration to
fix any incorrectly created bots leaked previously.
This should dramatically improve the queue processor's performance in
cases where there's a very high volume of requests on a given endpoint
by a given user, as described in the new docstring.
Until we test this more broadly in production, we won't know if this
is a full solution to the problem, but I think it's likely. We've
never seen the UserActivityInterval worker end up backlogged without a
total queue processor outage, and it should have a similar workload.
Fixes#13180.
With the way these tests are, it's unnecessary to have 3 separate
classes, and it makes it confusing to decide where to add a potential
additional mm email test.
In a gigantic realm where we send several MB of `page_params`, it’s
slightly better to have the rest of the `<body>` available to the
browser earlier, so it can show the “Loading…” spinner and start
fetching subresources.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This sidesteps tricky escaping issues, and will make it easier to
build a strict Content-Security-Policy.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This brings us in line, and also allows us to style these more like
unordered lists, which is visually more appealing.
On the backend, we now use the default list blockprocessor + sane list
extension of python-markdown to get proper list markup; on the
frontend, we mostly return to upstream's code as they have followed
CommonMark on this issue.
Using <ol> here necessarily removes the behaviour of not renumbering
on lists written like 3, 4, 7; hopefully users will be OK with the
change.
Fixes#12822.
Also cleans up the interface between the management command and the
LDAP backends code to not guess/recompute under what circumstances
what should be logged.
Co-authored-by: mateuszmandera <mateusz.mandera@protonmail.com>
The order of operations for our LDAP synchronization code wasn't
correct: We would run the code to sync avatars (etc.) even for
deactivated users.
Thanks to niels for the report.
Co-authored-by: mateuszmandera <mateusz.mandera@protonmail.com>
Fixes#13130.
django_auth_ldap doesn't give any other way of detecting that LDAPError
happened other than catching the signal it emits - so we have to
register a receiver. In the receiver we just raise our own Exception
which will properly propagate without being silenced by
django_auth_ldap. This will stop execution before the user gets
deactivated.
So the reason 38f8cf612c seems
to be flaking is because the value of harry id switches between
1 and 2 in Xenial while in Bionic it would be fixed at 2. The
reason behind this is that Bionic ships with Python3.6 which
preserves dict insert order while Python3.5 that ships with Xenial
dont preserve the order. In initialize_stream_membership_dicts
we iterate user_data_map dict and the order in which the iteration
happens affects the ID of the users.
We have a very useful piece of code, _RateLimitFilter, which is
designed to avoid sending us a billion error emails in the event that
a Zulip production server is down in a way that throws the same
exception a lot. The code uses memcached to ensure we send each
traceback roughly once per Zulip server per 10 minutes (or if
memcached is unavailable, at most 1/process/10 minutes, since we use
memcached to coordinate between processes)
However, if memcached is down, there is a logging.error call internal
to the Django/memcached setup that happens inside the cache.set() call,
and those aren't caught by the `except Exception` block around it.
This ends up resulting in infinite recursion, eventually leading to
Fatal Python error: Cannot recover from stack overflow., since this
handler is configured to run for logging.error in addition to
logging.exception.
We fix this using a thread-local variable to detect whether we are
being called recursively.
This change should prevent some nasty failure modes we've had in the
past where memcached being down resulted in infinite recursion
(resulting in extra resources being consumed by our error
notifications code, and most importantly, the error notifications not
being sent).
Fixes#12595.
There's no reason for this to be a category of error that emails the
server administrator, since there's a good chance that fixing it will
need to be done in the Zulip codebase, not administrator action.
Fixes#9401.
This adds a FAKE_EMAIL_DOMAIN setting, which should be used if
EXTERNAL_HOST is not a valid domain, and something else is needed to
form bot and dummy user emails (if email visibility is turned off).
It defaults to EXTERNAL_HOST.
get_fake_email_domain() should be used to get this value. It validates
that it's correctly set - that it can be used to form valid emails.
If it's not set correctly, an exception is raised. This is the right
approach, because it's undesirable to have the server seemingly
peacefully operating with that setting misconfigured, as that could
mask some hidden sneaky bugs due to UserProfiles with invalid emails,
which would blow up the moment some code that does validate the emails
is called.
We’re about to start using PostgreSQL-specific syntax that can’t be
stringified without a specified dialect.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Previously, several of our URL patterns accidentally did not end with
`$`, and thus ended up controlling just the stated URL, but actually a
much broader set of URLs starting with it.
I did an audit and fixed what I believe are all instances of this URL
pattern behavior. In the process, I fixed a few tests that were
unintentionally relying on the behavior.
Fixes#13082.
Historically, Zulip's implementation of wildcard mentions never
triggered either email or push notifications, instead being limited to
desktop notifications and the "mentions" counter.
We fix this just by plumbing the "wildcard_mentioned" flag through our
system.
Implements much of
https://github.com/zulip/zulip/issues/6040#issuecomment-510157264.
We're also now ready to seriously work on #3750.
After a new user joins an active organization, it isn't obvious what
to do next; this change causes there to be recent unread messages in
the stream sidebar for the user to click on to get a feel for what's
happening in the organization and experiment with Zulip.
Fixes#6512.
Previously, the unread_msgs data structure accounting (used for both
the web and mobile apps to determine the "Unread mentions" count
displayed in the UI) did not include wildcard mentions at all.
We fix this by adding the logic required to include properly that
data, with tests. As discussed in #6040, it makes sense to include
muted streams and topics for the purpose of this calculation.
Fixes part of #6040.
Rather than continually resetting the contents of an existing event
queue, we allocate a new one for each subtest.
We also fix a rather confusing bundle of comments.
Hopefully this does a better job of spurring people to action, and also
suggests a self-service fix if they don't (i.e. contacting the person that
invited them).
Add ability to search entire message history of all public streams at
once. It includes all subscibed, non subscribed public streams messages
and even historical public stream messages sent before user had joined
an organization or stream.
Fixes#8859.
Instead of having a hard-coded url, it seems better to replace it with
get_gravatar_url - which returns the correct url, without breaking if
the email/id of the example user changes.
Send the config_options for each supported incoming webhook bot along
with the initial state (not present in apply_events since this is
mostly just static data).
Without disturbing the flow of the existing code for configuring
embedded bots too much, we now use the config_options feature to
allow incoming webhook type bot to be configured via. the "/bots"
endpoint of the API.
This was used as a helper to construct the final display_recipient when
fetching messages. With the new mechanism of constructing
display_recipient by fetching appropriate users/streams from the
database and cache, this shouldn't be needed anymore.
Instead of having the rather unclear type Union[str,
List[UserDisplayRecipient]] where display_recipient of message dicts was
involved, we use DisplayRecipientT (renamed from DisplayRecipientCacheT
- since there wasn't much reason to have the word Cache in there), which
makes it clearer what is the actual nature of the objects and gets rid
of this pretty big type declaration.
Since the display_recipients dictionaries corresponding to users are
always dictionaries with keys email, full_name, short_name, id,
is_mirror_dummy - instead of using the overly general Dict[str, Any]
type, we can define a UserDisplayRecipient type,
using an appropriate TypedDict.
The type definitions are moved from display_recipient.py to types.py, so
that they can be imported in models.py.
Appropriate type adjustments are made in various places in the code
where we operate on display_recipients.
The user information in display_recipient in cached message_dicts
becomes outdated if the information is changed in any way.
In particular, since we don't have a way to find all the message
objects that might contain PMs after an organization toggles the
setting to hide user email addresses from other users, we had a
situation where client might see inaccurate cached data from before
the transition for a period of up to hours.
We address this by using our generic_bulk_cached_fetch toolchain to
ensure we always are fetching display_recipient data from the database
(and/or a special recipient_id -> display_recipient cache, which we
can flush easily).
Fixes#12818.
This restructures the API endpoints that we currently have implemented
more or less for exclusive use by the mobile and desktop apps (things
like checking what authentication methods are supported) to use a
system that can be effectively parsed by our test_openapi
documentation.
This brings us close to being able to eliminate
`buggy_documentation_endpoints` as a persistently nonempty list.
This add some regular expression manipulation hacks to make it
possible for us to validate the documentation for the presence
endpoint with a slightly more complex regular expression capture
group.
Previously, our OpenAPI documentation validation was failing for some
endpoints because it didn't account for the `in: path` type of
parameter, resulting in a mismatch between what was declared via REQ
and what was declared in the OpenAPI docs.
We fix this by excluding the path type parameters in both places from
what's considered by documentation using the `path_only` flag.
I doubt this is the correct long-term fix; in particular, I don't
think we're actually running the validators for these path-only
parameters. The examples that exist today are all IDs with validators
for being non-negative numbers, but longer-term I think we'll want to
do something different (possibly at the REQ layer, see the TODO).
Instead of just mocking some fake events, we use the code
path that generates slow query events and publishes them
to SlowQueryWorker.
This test improvement would have got a recent potential regression
caught in code review.
Our new curl example generation logic was broken, in that it hardcoded
localhost:9991 (without an HTTP method or anything) as the API URL.
It requires a bit of plumbing to make this possible.
Apparently, the filters written for the send_password_reset_email (and
some other management commands) didn't correctly consider the case of
deactivated users.
While some commands, like syncing LDAP data (which can include whether
a user should be deactivated) want to process all users, other
commands generally only want to interact with active users. We fix
this and add some tests.
The original seems to be unmaintained
(johnsensible/django-sendfile#65). Notably, this fixes a bug in the
filename parameter, which perviously showed the Python 3 repr of a
byte string (johnsensible/django-sendfile#49).
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
The `users/me/subscriptions` endpoint accidentally started returning
subscriber information for each stream. This is convenient, but
unnecessarily costly for those clients which either don't need it
(most API apps) or already acquire this information via /register
(including Zulip's apps).
This change removes that data set from the default response. Clients
which had come to rely on it, or would like to rely on it in future,
may still access it via an additional documented API parameter.
Fixes#12917.
I changed the class of the title in order to use the same styling as the
other similar pages (like `/accounts/go` or `/login`).
Changed the related test.
For the emails that are associated to an existing account in an
organisation, the avatars will be displayed in the email selection
page. This includes avatar data in what is passed to the page.
Added `avatar_urls` to the context in `test_templates.py`.
Apparently GitHub changed the email address for these; we need to
update our code accordingly.
One cannot receive emails on the username@users.noreply.github.com, so
if someone tries creating an account with this email address, that
person would not be able to verify the account.
The previous iteration still had the failure mode of not actually
testing anything, because it didn't trigger the data export code path
(and in fact was getting an HTTP 401 authentication denied error).
This test was broken due to using an empty `RealmAuditLog`
table. We fix this by mocking the creation of an export,
thus creating an entry, similar to what we do in our other
tests.
Previous cleanups (mostly the removals of Python __future__ imports)
were done in a way that introduced leading newlines. Delete leading
newlines from all files, except static/assets/zulip-emoji/NOTICE,
which is a verbatim copy of the Apache 2.0 license.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Now that we can create cURL examples based on the OpenAPI
documentation. We can begin using simple one line tags in
the documentation instead of manually creating cURL examples.
Fixes part of #12878.
Now we can also include extra keyword arguments to specify
modifications in how the example code should be generated
in the generate_code_example template tag.
E.g. generate_code_example(curl, exclude=["param1", "param2"])
This commit extends api_code_examples.py to support automatically
generating cURL examples from the OpenAPI documentation. This way
work won't have to be repeated and we can also drastically reduce
the chance of introducing faulty cURL examples (via. an automated
test which can now be easily created).
This commit progress our efforts to reduce pending_endpoints
as well as to migrate away from templates/zerver/api/fixtures
and towards our OpenAPI documentation.
Similar to commit d62b75fc.
The current code looks like it's trying to redirect /integrations/doc/email
to /integrations when EMAIL_GATEWAY_PATTERN is not set.
I think it doesn't currently do this. The test for that pathway has a bug:
self.get_doc('integrations/doc-html/email', subdomain='zulip') needs a
leading slash, and putting the slash back in results in the test failing.
This redirection is not really desired behavior -- better is to
unconditionally show that the email integration exists, and just point the
user to https://zulip.readthedocs.io/en/latest/production/email-gateway.html
(this is done in a child commit).
This gives us access to typing_extensions.Deque, which was not added
to typing until 3.5.4.
(PROVISION_VERSION is not bumped because the transitive dependency set
in dev.txt hasn’t changed.)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This verifies that the client passed a last_event_id that actually
came from the queue instead of making up an ID from the future. It
turns out one of our tests was making up such an ID, but legitimate
clients are expected not to do so.
The previous version of this commit (commit
e00d4be6d5, #12888) had to be reverted
(commit b86c5cc490) because it was
missing the `to_dict`/`from_dict` migration code.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Our implementation requires at least 1 space after the
'#' not not break existing linkifiers like '#123', etc.
that generally follow the convention we show in linkifier
examples.
- [valid] : # Hello
- [valid] : # Hello
- [invalid]: #Hello
For the frontend, we have taken the code from v0.7.0 of
upstream marked and made minor changes to avoid having
to refactor a significant part of our marked code.
For the backend, we merely have to change the regex to
force require spaces after #, and add hashheader to our
list of blockparsers.
Fixes#11418.
This commits reduces the number of values returned by
channel_to_zerver_stream function by setting the values
directly in realm dict and returning it instead.
This verifies that the client passed a last_event_id that actually
came from the queue instead of making up an ID from the future. It
turns out one of our tests was making up such an ID, but legitimate
clients are expected not to do so.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This feature is intended to cover all of our ways of exporting a
realm, not just the initial "public export" feature, so we should name
things appropriately for that goal.
Additionally, we don't want to include data exports in page_params;
the original implementation was actually buggy and would have.
When a person creates a new realm, they'll likely want to create a
bunch of initial streams at once. When doing so, it could be annoying
to have to mark all of the new stream notification messages as read.
Thus to make this process smoother, we should automatically mark
the messages generated by the Notification Bot in the notifications
(announcements) stream, as well as in the newly created stream itself
as read by the stream creator.
Fixes#12765.
This commit add an pretty elaborate extension to the existing
openapi documentation validation test: test_openapi_arguments.
This does a metacode analysis, comparing the openapi documentation
with the appropriate function's declaration, default values etc.
While it has some limitations, it is able to catch various common
classes of mistakes in the types declared for our OpenAPI
documentation.
Django’s default FileSystemFinder disallows STATICFILES_DIRS from
containing STATIC_ROOT (by raising an ImproperlyConfigured exception),
because STATIC_ROOT is supposed to be the result of collecting all the
static files in the project, not one of the potentially many sources
of static files.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This change serves to declutter webhook-errors.log, which is
filled with too many UnexpectedWebhookEventType exceptions.
Keeping UnexpectedWebhookEventType in zerver/lib/webhooks/common.py
led to a cyclic import when we tried to import the exception in
zerver/decorators.py, so this commit also moves this exception to
another appropriate module. Note that our webhooks still import
this exception via zerver/lib/webhooks/common.py.
Changed the requirements for UserProfile in order to allow use of
the formataddr function in send_mail.py.
Converted send_email to use formataddr in conjunction with the commit
that strengthened requirements for full_name, such that they can now be
used in the to field of emails.
Fixes#4676.
We were seeing errors when pubishing typical events in the form of
`Dict[str, Any]` as the expected type to be a `Union`. So we instead
change the only non-dictionary call, to pass a dict instead of `str`.
The code generating pub_dates for messages would fail to distribute them
across days if tot_messages was too large.
We refactor this code as a separate function (for clarity and to unit
test for the bug we're fixing), and change the structure and naming to a
form that more clearly describes what's happening. We also shift away
from the approach of all the float-to-int conversions as this is in
general tricky and bug prone - django's timedelta() handles floats as
arguments, so we take advantage of that.
This replaces the two custom Google authentication backends originally
written in 2012 with using the shared python-social-auth codebase that
we already use for the GitHub authentication backend. These are:
* GoogleMobileOauth2Backend, the ancient code path for mobile
authentication last used by the EOL original Zulip Android app.
* The `finish_google_oauth2` code path in zerver/views/auth.py, which
was the webapp (and modern mobile app) Google authentication code
path.
This change doesn't fix any known bugs; its main benefit is that we
get to remove hundreds of lines of security-sensitive semi-duplicated
code, replacing it with a widely trusted, high quality third-party
library.
During the time between when we refactored the GitHub authentication
backend to use SocialAuthBase and now (when we're about to migrate
GoogleAuthBackend to use that code path as well), we accidentally
added some GitHub-specific authentication backend tests to the common
test class.
Fix this by moving them to the GitHub-specific subclass.
This is a prep commit for adding validation of the request variable
types since then we would need to actually analyze the code of the
actual function itself and we would need a variable storing the
function itself.
In commit 7c71e98, we added a special exception for the
/users/me/subscriptions endpoint in the automatic validation test.
By adding some extra documentation, we now remove this extra code,
as well as the endpoint from the list of pending endpoints.
In the validation test, we now use a different message for when there
is an endpoint in pending_endpoints with some documentation already.
This change is a bit hackish, but it's okay since we'll be removing it
once we've resolved all pending endpoints (which is bound to happen).
Mateusz Mandera
Tim Abbott
Anders Kaseorg
Matheus Melo
Gloria Elston
Tlazypanda
Rafid Aslam
Hemanth V. Alluri
Vishnu KS
Pragati Agrawal
Rohitt Vashishtha
Rishi Gupta
Laurel Michaels
Wyatt Hoodes
Thomas Ip
Yashashvi Dave
Mohit Gupta
okmanl
Priyank Patel
meiomorphism
Alexandra Ciobica
neiljp (Neil Pilgrim)
Eeshan Garg
Conner Bondurant
Harshit Bansal