Now we have moved the `do_auth` function to `SocialAuthMixin`. Instead
of overriding `do_auth`, derived class is now expected to override
`get_authenticated_user`.
`do_auth` now contains code which is expected by all backends.
Storage limititations are only set on the value of
a config entry, since this is the only user-accessible
part of the schema. Keys are statically set by each
embedded bot.
This endpoint will allow us to add/delete emoji reactions whose emoji
got renamed during various emoji infra changes. This was also a
required change for realm emoji migration.
This commit was tweaked significantly by tabbott for greater clarity
(with no changes to the actual logic).
Note from tabbott: While this initial version is experimental and
definitely incomplete, we expect to have a solid version done over the
next few weeks (after more refactoring). We're merging this now to
make it easy to test both versions when refactoring our CSS.
Fixes#267.
These are new:
new-user-bot
emailgateway
Our cross-realm bots are hard coded to have email addresses
in the `zulip.com` domain, and they're not part of ordinary
realms.
These have always been cross-realm, but new enforcement in the
frontend code of all messages having been sent by a known user means
that it's important to add these properly.
The warning here means that the admin can't really act on this yet if
they want to disable email auth, which is likely among admins that
want to make any changes here. And for admins who don't, this is an
extra thing to read and make a decision about before they can get a
server running. See #6985.
Conversely, we already discuss auth backends right at the top of the
`prod-customize` doc, which is linked under "Next steps" at the end of
these instructions.
The warning about EmailAuthBackend is important; but we can move it to
the config file right next to the setting, and then it's available
right when it's actionable, which is if the admin is actually thinking
about changing the setting.
For some historical reason we'd had the Postgres documentation on
valid SSL modes copied into the Zulip settings.py template file. This
fixes that historical artifact.
This change prepares us to have the server send avatar_url
of None when somebody wants a gravatar avatar (as opposed
to a user-uploaded one).
Subsequent commits will change behavior on both the server
and client to have this happen. So this commit has no-op
code for now, but it will soon use the fallback-to-gravatar
logic.
The control panel on the Google side doesn't seem to match the
instructions we have; it looks pretty 2017 to me, so I imagine
it's had a redesign since the instructions were written.
Also, in dev, EXTERNAL_HOST is now a port on zulipdev.com, not on
localhost.
Update these instructions for those developments, and edit lightly.
In dev, recommend setting in `dev_settings` instead of in
`prod_settings_template`; that feels to me a little more reflective of
the actual intent, and the effect should be equivalent.
The main limitation of this version is that it's controlled entirely
from settings, with nothing in the database and no web UI or even
management command to control it. That makes it a bit more of a
burden for the server admins than it'd ideally be, but that's fine
for now.
Relatedly, the web flow for realm creation still requires choosing a
subdomain even if the realm is destined to live at an alias domain.
Specific to the dev environment, there is an annoying quirk: the
special dev login flow doesn't work on a REALM_HOSTS realm. Also,
in this version the `add_new_realm` and `add_new_user` management
commands, which are intended for use in development environments only,
don't support this feature.
In manual testing, I've confirmed that a REALM_HOSTS realm works for
signup and login, with email/password, Google SSO, or GitHub SSO.
Most of that was in dev; I used zulipstaging.com to also test
* logging in with email and password;
* logging in with Google SSO... far enough to correctly determine
that my email address is associated with some other realm.
This means one fewer thing the admin typically needs to read, absorb,
and make a decision about at install time.
The one way this change could hypothetically cause trouble is if the
admin wants to keep subdomains of EXTERNAL_HOST out of ALLOWED_HOSTS.
But while the subdomains often won't exist as domain names, it's hard
to imagine the situation in which they would exist but be under
someone else's control, or be doing something other than serving
Zulip realms.
This commit allows for the /api-new/ page to rendered similarly to our
/help pages. It's based on the old content for /api, but we're not
replacing the old content yet, to give a bit of time to restructure
things reasonably.
Tweaked by eeshangarg and tabbott.
This was part of the logic to handle EXTERNAL_API_PATH varying.
But also it was already no longer used -- it was only ever passed
into template contexts, as `external_api_uri`, and it'd been
overtaken there by `external_api_uri_subdomain`.
So, update our dev docs to reflect that, and eliminate the variable.
This setting isn't documented at all, and I believe nobody has used it
since the end of api.zulip.com in 2016. So we get to complete the
cleanup of this logic.
The HelpView class will render a directory as markdown with an index HTML
page. This however can also be used for other generics and applied to
the API pages as well, so change the class to a generic class and
specify the path templates and names.
Tweaked by tabbott and Eeshan Garg.
Our set_loglevel tool didn't set propagate to False, so just using it
directly wouldn't work unless the logger is explcitly declared in
zproject/settings.py, which this one isn't.
The cookie mechanism only works when passing the login token to a
subdomain. URLs work across domains, which is why they're the
standard transport for SSO on the web. Switch to URLs.
Tweaked by tabbott to add a test for an expired token.
Most of these have more to do with authentication in general than with
registering a new account. `create_preregistration_user` could go
either way; we move it to `auth` so we can make the imports go only in
one direction.
Lets administrators view a list of open(unconfirmed) invitations and
resend or revoke a chosen invitation.
There are a few changes that we can expect for the future:
* It is currently possible to invite an email that you have already
invited, it might make sense to change this behavior.
* Resend currently sends an invite reminder instead of resending the
original invite, this is because 'custom_body' was not stored when
the first invite was sent.
Tweaked in various minor ways, primarily in the backend, by tabbott,
mostly for style consistency with the rest of the codebase.
Fixes: #1180.
Now that every call site of check_subdomain produces its second
argument in exactly the same way, push that shared bit of logic
into a new wrapper for check_subdomain.
Also give that new function a name that says more specifically what
it's checking -- which I think is easier to articulate for this
interface than for that of check_subdomain.
Adds support to add "Embedded bot" Service objects. This service
handles every embedded bot.
Extracted from "Embedded bots: Add support to add embedded bots from
UI" by Robert Honig.
Tweaked by tabbott to be disabled by default.
This should help prevent confusion where new users find themselves on
the LDAP login form and click "register" because they know they don't
have an account. Whereas in fact, their account will be auto-created
if they just login, so there's no need for them to access it.
This fixes a problem we've seen where LDAP users were not getting this
part of the onboarding process, and a similar problem for human users
created via the API.
Ideally, we would have put these fixes in process_new_human_user, but
that would cause import loop problems.
The rules here are fuzzy, and it's quite possible none of Zulip's emails
need an address at all. Every country has its own rules though, which makes
it hard to tell. In general, transactional emails do not need an address,
and marketing emails do.
This is a two-step notifications process that will ask a user
to enable notifications and if they click exit give them three
options:
1. Enable notifications.
2. Ask later.
3. Never ask on this computer again.
The first two are self-explanatory (ask later = next session it
asks again). The third is captured and stored in localStorage and
a check is done on page load to see whether or not notifications
should be displayed.
Commit modified heavily by Brock Whittaker <brock@zulipchat.com>.
Fixes#1189.
By default, Django sets up two handlers on this logger, one of them
its AdminEmailHandler. We have our own handler for sending email on
error, and we want to stick to that -- we like the format somewhat
better, and crucially we've given it some rate-limiting through
ZulipLimiter.
Since we cleaned out our logging config in e0a5e6fad, though, we've
been sending error emails through both paths. The config we'd had
before that for `django` was redundant with the config on the root --
but having *a* config there was essential for causing
`logging.config.dictConfig`, when Django passes it our LOGGING dict,
to clear out that logger's previous config. So, give it an empty
config.
Django by default configures two loggers: `django` and
`django.server`. We have our own settings for `django.server`
anyway, so this is the only one we need to add.
The stdlib `logging` and `logging.config` docs aren't 100% clear, and
while the source of `logging` is admirably straightforward the source
of `logging.config` is a little twisty, so it's not easy to become
totally confident that this has the right effect just by reading.
Fortunately we can put some of that source-diving to work in writing
a test for it.
This works around a bug in Django in handling the error case of a
client sending an inappropriate HTTP `Host:` header. Various
internal Django machinery expects to be able to casually call
`request.get_host()`, which will attempt to parse that header, so an
exception will be raised. The exception-handling machinery attempts
to catch that exception and just turn it into a 400 response... but
in a certain case, that machinery itself ends up trying to call
`request.get_host()`, and we end up with an uncaught exception that
causes a 500 response, a chain of tracebacks in the logs, and an email
to the server admins. See example below.
That `request.get_host` call comes in the midst of some CSRF-related
middleware, which doesn't even serve any function unless you have a
form in your 400 response page that you want CSRF protection for.
We use the default 400 response page, which is a 26-byte static
HTML error message. So, just send that with no further ado.
Example exception from server logs (lightly edited):
2017-10-08 09:51:50.835 ERR [django.security.DisallowedHost] Invalid HTTP_HOST header: 'example.com'. You may need to add 'example.com' to ALLOWED_HOSTS.
2017-10-08 09:51:50.835 ERR [django.request] Internal Server Error: /loginWithSetCookie
Traceback (most recent call last):
File ".../django/core/handlers/exception.py", line 41, in inner
response = get_response(request)
File ".../django/utils/deprecation.py", line 138, in __call__
response = self.process_request(request)
File ".../django/middleware/common.py", line 57, in process_request
host = request.get_host()
File ".../django/http/request.py", line 113, in get_host
raise DisallowedHost(msg)
django.core.exceptions.DisallowedHost: Invalid HTTP_HOST header: 'example.com'. You may need to add 'example.com' to ALLOWED_HOSTS.
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File ".../django/core/handlers/exception.py", line 109, in get_exception_response
response = callback(request, **dict(param_dict, exception=exception))
File ".../django/utils/decorators.py", line 145, in _wrapped_view
result = middleware.process_view(request, view_func, args, kwargs)
File ".../django/middleware/csrf.py", line 276, in process_view
good_referer = request.get_host()
File ".../django/http/request.py", line 113, in get_host
raise DisallowedHost(msg)
django.core.exceptions.DisallowedHost: Invalid HTTP_HOST header: 'example.com'. You may need to add 'example.com' to ALLOWED_HOSTS.
Apparently, this sockjs.tornado logging code resulted in a lot of
buggy error emails whenever a Zulip browser tried to reconnect on a
new IP. I don't see an obvious way to suppress them from within
sockjs, but that might be a good follow-up issue.
Fixes#6959.
The comment is pretty self-explanatory. The fact that Google Compute
Engine has this problem does not impress confidence about their
product, but hopefully this is the only really dumb thing they do.
Fixes#4839.
The original "quality score" was invented purely for populating
our password-strength progress bar, and isn't expressed in terms
that are particularly meaningful. For configuration and the core
accept/reject logic, it's better to use units that are readily
understood. Switch to those.
I considered using "bits of entropy", defined loosely as the log
of this number, but both the zxcvbn paper and the linked CACM
article (which I recommend!) are written in terms of the number
of guesses. And reading (most of) those two papers made me
less happy about referring to "entropy" in our terminology.
I already knew that notion was a little fuzzy if looked at
too closely, and I gained a better appreciation of how it's
contributed to confusion in discussing password policies and
to adoption of perverse policies that favor "Password1!" over
"derived unusual ravioli raft". So, "guesses" it is.
And although the log is handy for some analysis purposes
(certainly for a graph like those in the zxcvbn paper), it adds
a layer of abstraction, and I think makes it harder to think
clearly about attacks, especially in the online setting. So
just use the actual number, and if someone wants to set a
gigantic value, they will have the pleasure of seeing just
how many digits are involved.
(Thanks to @YJDave for a prototype that the code changes in this
commit are based on.)
This endpoint is part of the old tutorial, which we've removed, and
has some security downsides as well.
This includes a minor refactoring of the tests.
Create a new custom email backend which would automatically
logs the emails that are send in the dev environment as
well as print a friendly message in console to visit /emails
for accessing all the emails that are sent in dev environment.
Since django.core.mail.backends.console.EmailBackend is no longer
userd emails would not be printed to the console anymore.
In 1.2.15 version of django-auth-ldap, the authenticate() function of
LDAPBackend takes username and password as keyword arguments. This
commit updates the code to match this change.
Fixes#6588
Tim Abbott
Rishi Gupta
Umair Khan
derAnfaenger
Aditya Bansal
Harshit Bansal
Brock Whittaker
Vishnu Ks
Steve Howell
Greg Price
Cynthia Lin
rht
neiljp (Neil Pilgrim)
Henrik Pettersson
Abhijeet Kaur
darshanime
Maarten Rijke
Aastha Gupta
Alena Volkova