When a user entered an invalid character (whitespace or characters not
present in a name), the cleaned-up array, and hence the query,
would be empty which resulted in an error.
Fixes#17542
Extend our markdown system to support mentioning of users
by id also. Following these changes, it would be possible
to mention users with @**|user_id** and silently mention
using @_**|user_id**.
Main intention for extending the mention syntax is to make
it convenient for bots to mention a users using their ids. It
is to be noted that previous syntax are also supported.
Documentation tweaked by tabbott for better readability.
The changes were tested manually in development server, and also
by adding some new backend and frontend tests.
Fixes: #17487.
These were introduced in ff9a929d7a
with no explanation of why they were necessary.
Generally you only render a few things, and it's
important that they're up to date.
We weren't doing a good job of invalidating the cache.
Eliminating the cache will fix bugs (like presence circles
being out of date) and break some dependencies.
I removed some very fragile test code that was relying
on invalid values taken out of the cache. (We now have
less line coverage, but if we want to test our rendering,
there are much cleaner ways to do it.)
As part of testing this, I renamed Hamlet to "aaron", so
that there are two aarons, and then I logged on as Iago
to see the "secondary" code in action that shows their
emails to distinguish them.
This add the schema checker, openapi schema, and also a test for
realm/deactivated event.
With several block comments by tabbott explaining the logic behind our
behavior here.
Part of #17568.
This adds support for unstarring all (starred)
messages from a particular topic, from the topic
popover.
The earlier implementation of this in #16898
was reverted in bc55aa6a01 (#17429)
because it had two problems-
1. The crash reported in bc55aa6a01
was due to message_store returning undefined. This happens
when the message itself hasn't been fetched from the server
yet, but we know that the message is starred from the ids
in `page_params` in `starred_messages.js`.
This commit handles this case explicitly.
Note that, we simply ignore those messages which
we haven't fetched, and because of this, it may
happen that we don't unstar some messages from that
topic. The correct implementation for this would
be to ask the backend for starred IDs in a topic.
2. The earlier implementation actually unstarred **all**
messages. This was because it grabbed the topic and stream_id
from the topic popover `data` attributes, after the topic
popover had been closed. This passed `undefined`, which
the function then interpreted as an action to unstar all
messages.
With this commit, we use the confirm_dialog widget,
which eliminates the need to store this data in the DOM.
This is mostly a refactoring to break the unnecessary
dependency of bot_data on settings_bots.
This is a bit more than a refactoring, as I remove all
the debounced calls to render bots during the
initialization of bot_data. (The debouncing probably
meant we only rendered once, but it was still needless
work.)
We don't need to explicitly render bots during
bot_data.initialize(), which you can verify by loading
"#settings/your-bots" as the home page. It was just an
artifact of how add() was implemented.
Note that for the **admin** screen, we did not and
still do not do live updates for add/remove; we only do
it for updates. Fixing that is out of the scope of this
change. The code that was moved here affects
**personal** bot settings.
Note that the debounce code is quite fragile. See my
code comment that explains it. I don't have time to go
down the rabbit hole of a deep fix here. The puppeteer
tests would fail without the debounce, even though I
was able to eliminate the debounce in an earlier
version of this fix and see good results during manual
testing. (My testing may have just been on the "lucky"
side of the race.) I created #17743 to address this
problem.
This mainly extracts a new module called
browser_history. It has much fewer dependencies
than hashchange.js, so any modules that just
need the smaller API from browser_history now
have fewer transitive dependencies.
Here are some details:
* Move is_overlay_hash to hash_util.
* Rename hashchange.update_browser_history to
brower_history.update
* Move go_to_location verbatim.
* Remove unused argument for exit_overlay.
* Introduce helper functions:
* old_hash()
* set_hash_before_overlay()
* save_old_hash()
We now have 100% line coverage on the extracted
code.
The only caller for this function was settings_config,
so we put it there.
For the stream_edit test we no longer mock the function.
(The reason we mocked the function was more about avoiding
the heavy settings_notifications import than the function
itself.) This gives some incidental coverage, but then I
also add some more real coverage on it.
We extract compose_fade_users and compose_fade_helper.
This is a pretty verbatim extraction of code, apart from adding a few
exports and changing the callers.
This change makes the buddy_data module no longer sit "above" these
files in the dependency graph (at least not via compose_fade):
* jquery
* lodash (not a big deal)
* compose_state
* floating_recipient_bar
* message_viewport
* rows
The new moules have dependencies that buddy_data already
had directly for other reasons:
* people
* util
And then buddy_data still depends on stream_data indirectly through
the compose-fade logic for stream_data. Even without compose-fade, it
would depend indirectly on stream_data via hash_util.
Note that we could have lifted the calls to compose_fade out of
buddy_data to move some dependencies around, but it's useful to have
buddy_data fully encapsulate what goes into the buddy list without
spreading responsibilities to things like activity.js and
buddy_list.js. We can now unit-test the logic at the level of
buddy_data, which is a lot easier than trying to do it via modules
that delegate drawing or do drawing (such as activity.js and
buddy_list.js).
Note that we still don't have 100% line coverage on the
compose_fade.js module, but all the code that we extracted now is
covered, mostly via buddy_data tests.
Previously, it was tedious to create actual message
objects in message_store for use in node tests.
This was mainly because, `add_message_metadata`
in message_store has many dependencies and
validation checks. Since it was difficult to create
actual message objects, many tests just mocked
the `message_store.get()` method to return the desired
message.
This commit adds a new helper method (`create_mock_message`)
to message_store, for use in node tests. This just stores
the object passed to it in the `stores_messages` map,
without any validation. We do not add any
default fields to the message object before saving
it from this helper, because doing so would decrease
the utility of this helper, and, if a test
depends on some field having a particular value,
then it would be better to just pass the field: value
pair from the test itself, for readability, rather
than relying on the helper to add the field for us.
This helper allows us to write deeper tests.
This commit also replaces some instances of mocking
`message_store.get()` to use this new helper method.
Fixes#17466
This commit will change encoding logic. Initial logic
was not encoding parenthesis, and this creates conflicts
with the markdown link format. To resolve this while encoding,
we're now replacing parenthesis with ".28" and ".29."
There is no need to change decoding logic because before
decoding any URL, we first convert all the “.” to “%.”
optimization: No need to replace parenthesis in popovers.js.
A few years ago I introduced the anti-pattern
of automatically calling success functions within
channel.get stubs. It's better to just capture
the success function and call it explicitly.
Also, we now have override(), so it's easy to
inline these types of things in a safe way.
These sigils will help make it easier to see that this is a special
Zulip syntax feature, not just something the other user typed, which
might help set the expectation that we're showing the time in the
user's timezone.
Tweaked by tabbott to improve variable/template naming.
Commit 5bd73ce190 (#17367)
unintentionally truncated more of the traceback rather than less when
there’s more than one Module._compile frame.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
We have generally gone away from using $(...)
initialization in modules that we test with
zjsunit, but there are a few remaining special
cases related to our billing and portico
codebases.
I remove an obsolete comment--we use get_streams()
for the `n` key now.
I also remove a guard statement from sort_groups()
that returned `undefined` for empty lists.
That guard statement would break this code:
const stream_groups = stream_sort.sort_groups(streams, get_search_term());
if (stream_groups.same_as_before && ...
The calling code prevents the situation anyway:
const streams = stream_data.subscribed_stream_ids();
if (streams.length === 0) {
return;
}
I modify the "no_subscribed_streams" test to test
the new behavior. (Even though stream_list currently
short-circuits the call here, that may change in the future.)
I also introduce the test() wrapper to explicitly clear
our data.
This is prep toward allowing individual tests
to fail while continuing to run the test suite.
Most of the steps in namespace.finish() could
be put in a `finally` block, but once a test
fails, there's no reason to complain about
unused mocks, since there are bigger things
to address.
When typing the password in Firefox,
it shows a "Not Secure" warning which was
hiding the "#get_api_key_button". You can see
the screenshot of it in #17136.
This commit fixes that issue by focusing on the button.
Factor out mock_cjs from mock_esm because adding __esModule prevents
mocks for CJS modules from being imported correctly.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Use fully resolvable request paths because we need to be able to refer
to third party modules, and to increase uniformity and explicitness.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This introduces the make_stream_message()
helper to avoid all the strange
`messages[0] === message1` confusion.
We also clear data explicitly at the beginning
of the test.
It's still a messy test.
A bunch of tests were mutating the same message.
Now they just make their own copy.
I introduce the name "sample_message" for the common
message, but I remove the two bogus reactions, and
the "warning" test now just creates its own
test-specific data.
I considered using set_info({}, 0) to clear data,
but it has a lot of machinery that could lead
to accidental line coverage and/or extra test
complexity.
This commit adds a new class for typeahead items that do not need
a presence circle. It is changed to support addition of new items
that do not require presence circle.
There should not be any visual change due to this.
* move one test below setup
* add a test() wrapper to clear mutes
* split up a test
* use two different dates for java vs. gossip
* deterministically sort by date
All these changes make it so that the order of
the tests is a lot less fragile.
{visible: false} just redundantly specifies the default behavior,
which is to wait for the selector to be present regardless of
visibility. We want to wait for these selectors to be hidden.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
TextField is used to allow users to set long stream + topic narrow
names in the urls.
We currently restrict users to only set "all_messages" and
"recent_topics" as narrows.
This commit achieves 3 things:
* Removes recent topics as the default view which loads when
hash is empty.
* Loads default_view when hash is empty.
* Loads default_view on pressing escape key when it is unhandled by
other present UI elements.
NOTE: After this commit loading zulip with an empty hash will
automatically set hash to default_view. Ideally, we'd just display
the default view without a hash, but that involves extra complexity.
One exception is when user is trying to load an overlay directly,
i.e. zulip is loaded with an overlay hash. In this case,
we render recent topics is background irrespective of default_view.
We consider this last detail to be a bug not important enough to block
adding this setting.
We want to be careful about MIT code, as it leads
to more lax checks in the filter code.
And then we just use with_field in a couple places
and clear subscriptions.
For most functions that we were using __Rewire__ for,
it's better to just use the override helper, which
use __Rewire__ under the hood, but also resets
the reference at the end of run_tests.
Another nice thing about override() is that it reports
when you never actually needed the mock, and this
commit fixes the instances found here.
I didn't replace every call to __Rewire__. The
remaining ones fall under these categories:
* I looked for ") =>" in my code sweep,
so I missed stuff like "noop" helpers.
* Sometimes we directly update something
in a module that's not a function. This
is generally evil, and we should use setters.
* Some tests have setup() helpers or similar
that complicated this code sweep, so I
simply punted.
* Somes modules rely on intra-test leaks. We
should fix those, but I just punted for the
main code sweep.
I now let folks override the same target multiple
times inside of `with_overrides` (and then indirectly
inside of `run_test`.)
I may re-impose this restriction in the future, since
most violations are due to code smells, but there are
a few legitimate use cases for this, and the code
can handle it, plus I want to remove some other
ugliness first.
This is a deceptively ugly diff. It makes
the actual code way more tidy.
I basically inlined some calls to mock_module
and put some statements in lexical order.
We now just use a module._load hook to inject
stubs into our code.
For conversion purposes I temporarily maintain
the API of rewiremock, apart from the enable/disable
pieces, but I will make a better wrapper in an
upcoming commit.
We can detect when rewiremock is called after
zrequire now, and I fix all the violations in
this commit, mostly by using override.
We can also detect when a mock is needlessly
created, and I fix all the violations in this
commit.
The one minor nuisance that this commit introduces
is that you can only stub out modules in the Zulip
source tree, which is now static/js. This should
not really be a problem--there are usually better
techniques to deal with third party depenencies.
In the prior commit I show a typical workaround,
which is to create a one-line wrapper in your
test code. It's often the case that you can simply
use override(), as well.
In passing I kill off `reset_modules`, and I
eliminated the second argument to zrequire,
which dates back to pre-es6 days.
I created this test in Jan 2019 with
6b7a4f8611.
At the time I created this we were still migrating modules
over from using the $(() => {...}) style of initialization,
so the test served a purpose as an easy smoke test that we
weren't doing something really stupid in
ui_init.initialize().
Now that that migration is complete, the test's warts start
to outweigh its benefits. Because it's just a smoke test,
we get credit for artificial line coverage where we're
exercising code without actually verifying anything other
than that it runs without crashing.
There are still possibilities for bugs within
ui_init.initialize() where we initialize modules in the
wrong sequence, but I am not confident that the node test
would catch them with any more likelihood (or clarity) than
either the puppeteer tests or czo bug reports.
And then on top of that, the zjquery setup in the node test
is hard to maintain. It's also hard to verify that some
of the setup isn't cruft.
If you want to see how much of a maintenance headache this
has been in recent times, just look at how many of the
recent commits have been related to things like es6
migrations or code cleanup sweeps.
We should just kill it.
"Alert Words" is one of Zulip's oldest settings UI elements, and as a
result is buggy. This commit converts it to use our standard
progressive-table-wrapper system used for settings tables, which has
the side effect of fixing a bug that mad ethe tables look pretty bad
if one adds a very long word.
Fixes#17172.
This commit addresses the problem of user's status visibility to
some extent. It adds presence circles, like we have in buddy_list to the
typeahead suggestions that are given for mentioning users in messages.
Tweaked by tabbott to adjust vertical alignment of group mentions as well.
Testing for the changes is done manually in the developement server,
and also by updating frontend tests to address these changes.
Fixes: #17138
This commit works around an issue with Puppeteer tests on Firefox
where `page.url()` does not show the URL fragment, by adding a
temporary function that solves the issue.
This commit introduces the `is_firefox`
option in CommonUtils to identify if a browser
is Firefox or not.
This helps us to avoid calling some tests
that is yet not compatible with Firefox.
When we run puppeteer with Firefox,
the `--window-size` option does not work,
which makes the bottom part of
the page cut off.
This commit fixes this issue
by setting the screen default viewport
to the maximum size of the window.
Found by running the tests after
sed -i 's/\.with(/.toBeUsed().with(/g' frontend_tests/node_tests/*.js
Signed-off-by: Anders Kaseorg <anders@zulip.com>
tushar912
Anders Kaseorg
Vishnu KS
Ganesh Pawar
Nishant Mittal
m-e-l-u-h-a-n
YashRE42
Steve Howell
shanukun
Abhijeet Prasad Bodas
100RABHpy
Nikhil Maske
Riken Shah
Riken Shah
Aman Agrawal
sahil839
Josh Gilley