These logs were pretty spammy, and there have long been much better
ways to communicate to system administrators that the incoming email
gateway is great, including, most importantly, in the section of the
emails themselves that explains how replying works.
On replying to an email notifcation from a stream where the user
does not come under the stream_post_policy will subsequently result
in a failure. In such a case, the user does not receive feedback
regarding the failure.
Notify the user via notification bot if their email
message failed to send.
Fixes#16642.
We always want to do these at the same time. Previously, message
editing did too much stripping (fixes#16837) and failed to check for
NUL bytes.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
There are three functional side effects:
• Correct an insignificant but mathematically offensive bias toward
repeated characters in generate_api_key introduced in commit
47b4283c4b4c70ecde4d3c8de871c90ee2506d87; its entropy is increased
from 190.52864 bits to 190.53428 bits.
• Use the base32 alphabet in confirmation.models.generate_key; its
entropy is reduced from 124.07820 bits to the documented 120 bits, but
now it uses 1 syscall instead of 24.
• Use the base32 alphabet in get_bigbluebutton_url; its entropy is
reduced from 51.69925 bits to 50 bits, but now it uses 1 syscall
instead of 10.
(The base32 alphabet is A-Z 2-7. We could probably replace all of
these with plain secrets.token_urlsafe, since I expect most callers
can handle the full urlsafe_b64 alphabet A-Z a-z 0-9 - _ without
problems.)
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This commit rewrites the way addresses are collected. If
the header with the address is not an AddressHeader (for instance,
Delivered-To and Envelope-To), we take its string representation.
Fixes: #15864 ("Error in email_mirror - _UnstructuredHeader has no attribute addresses").
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
After subscribing a stream email address to a Mailman email list
and receiving a message from it (using the polling configuration
with an Exim + Dovecot mailserver), the following error message
is emitted by Zulip:
Logger zerver.lib.email_mirror, from module zerver.lib.email_mirror line 77:
Error generated by Anonymous user (not logged in) on zulip deployment
Sender: "Foo Bar" <foo@example.com>
To: No recipient found
Missing recipient in mirror email
This is because the To: header on the received email corresponds
to the email list, and there are no other headers to indicate the
final recipient, apart from the "Envelope-To" header added by
Exim. To resolve this problem, the commit adds "Envelope-To" to
the list of headers to check for a match.
type().__name__ is sufficient, and much readable than type(), so it's
better to use the former for keys.
We also make the classes consistent in forming the keys in the format
type(self).__name__:identifier and adjust logger.warning and statsd to
take advantage of that and simply log the key().
This is just a refactoring to the more modern API
for sending internal messages.
To make this work we now plumb the email_gateway
flag through `internal_send_stream_message` instead
of `internal_send_message`.
We also change `send_zulip` to have its callers
pass in a full UserProfile object (which one of
them already had).
If an email is sent with the .prefer-html option, but it has no html
body, it's better to fall back to plaintext content instead of treating
it as a user error.
Closes#13484.
These options tell zulip whether to prefer the plaintext or html version
of the email message. prefer-text is the default behavior, so including
the option doesn't change anything as of now, but we're adding it to
prepare to potentially change the default behavior in the future.
Fixes#13416
We used to search only one level in depth through the MIME structure,
and thus would miss attachments that were nested deeper (which can
happen with some email clients). We can take advantage of message.walk()
to iterate through each MIME part.
process_missed_message did nothing other than calling
send_to_missed_message_address with the same arguments, so there's no
reason to have these as separate functions.
Addresses point 1 of #13533.
MissedMessageEmailAddress objects get tied to the specific that was
missed by the user. A useful benefit of that is that email message sent
to that address will handle topic changes - if the message that was
missed gets its topic changed, the email response will get posted under
the new topic, while in the old model it would get posted under the
old topic, which could potentially be confusing.
Migrating redis data to this new model is a bit tricky, so the migration
code has comments explaining some of the compromises made there, and
test_migrations.py tests handling of the various possible cases that
could arise.
In addition to the "+show-sender" option, we now add "+include-footers"
which disables stripping of the footer from the email body if this token
is included in the email address.
To enable a comfortable way of adding more optional tokens in the
address (like current '+show-sender') we change decode_email_address to
return a general dictionary containing options specified through adding
these optional tokens in the To: address. For now, we only have
"+show-sender", but more can be easily added using this change.
log_and_report and its helper functions were mostly old code no longer
well adapted to how email mirror works currently, as well as having no
test coverage. We rewrite this part of the email to report errors in a
similar manner, and add tests for it. We're able to get rid of the
clunky and now useless debug_info dictionary in process message, as
log_and_report only needs the recipient email in its third argument.
The only place in which process_stream_message used debug_info was to
set the 'stream' key, which would only be used if ZulipEmailForwardError
was raised after this line in the code - which is impossible, because after
that line only send_zulip (which doesnt raise this exception) and
logger.info get called, then process_stream_message successfully returns
and then process_message succesfully returns as well. So this debug_info
code wasn't doing anything. We remove it.
If the text part of an email message didn't specify the charset in the
Content-Type header, the text content wouldn't be found. We fix this, by
assuming us-ascii charset in those cases, as specified by RFC6657:
https://tools.ietf.org/html/rfc6657
With the previous commit, fixes#1836.
As specified in the issue above, we make
get_email_gateway_message_string_from_address raise an exception if
it doesn't recognise the email gateway address pattern. Then, we make
appropriate adjustments in the codepaths which call this function.
These functions don't really belong in actions.py, so we move them out,
into email_mirror_helpers.py. They can't go directly into
email_mirror.py or we'd get circular imports resulting in ImportError.
Closes#2420
We add rate limiting (max X emails withing Y seconds per realm) to the
email mirror. By creating RateLimitedRealmMirror class, inheriting from
RateLimitedObject, and rate_limit_mirror_by_realm function, following a
mechanism used by rate_limit_user, we're able to have this
implementation mostly rely on the already existing, and proven over
time, rate_limiter.py code. The rules are configurable in settings.py in
RATE_LIMITING_MIRROR_REALM_RULES, analogically to RATE_LIMITING_RULES.
Rate limit verification happens in the MirrorWorker in
queue_processors.py. We don't rate limit missed message emails, as due
to using one time addresses, they're not a spam threat.
test_mirror_worker is adapted to the altered MirrorWorker code and a new
test - test_mirror_worker_rate_limiting is added in test_queue_worker.py
to provide coverage for these changes.
To prepare for changing how the stream name gets encoded into mirror
email addresses while making sure old addresses keep working, we ignore
the stream_name part when receiving emails into the mirror and we only
look at the email_token to identify into which stream to mirror the
email.
Addresses point 2 of #10612. We use a regex to detect if a form
of FWD indicator is present at the beginning of the subject, which
means the message has been forwarded.
remove_quotations argument is added to a couple of functions where
it's necessary.
In filter_footer, the criteria for a line to be a possible beginning
of a footer is changed to line.strip() == "--", instead of
line.strip().startswith("--"), because the former would remove
quotations from plaintext emails. This change makes sense, because
RFC 3676 specifies ""-- " as the separator line between the body
and the signature of a message":
https://tools.ietf.org/html/rfc3676
We remove the 'subject' argument of process_stream_message and make
subject processing happen inside the function, as it's a more
appropriate place than the general process_message function and is
needed to have a good way of disabling removing quotations in forwarded
emails sent into the mirror.
Fixes part 3 of #10612. When sending an email to the email mirror to a
stream address, if "+show-sender" is added in the address, the stream
message will now include "From: <sender>" at the top.
For internal stream messages, most of the time, we have access to
a Stream object. For the few corner cases where we don't, it is a
much cleaner approach to have a separate function that accepts a
stream name than having one multi-option helper that accepts both
names and objects.
If the caller has access to a Stream object, it is wasteful to
query a database for a stream by ID or name. In addition, not
having to go through stream names eliminates various classes of
possible bugs involved with re-fetching the Stream object by name.
Previously, we had some hand-written logic for parsing the subject
line of the email's headers and turning it into a Python string using
each of the valid encodings for an email. That logic was buggy, and
sometimes resulted in a bytes object being passed into the
`send_zulip`, which would eventually throw an exception.
The fix for this is to use the Python standard library make_header
method for handling internationalized email headers.
https://stackoverflow.com/questions/7331351/python-email-header-decoding-utf-8
Fixes part 1 of #10612. We use a regex to remove RE:, FWD: (and similar
variations) from email subjects. Unit test is included, we add
subjects.json in fixtures containing various subjects to try the
stripping on.
When trying to find the email gateway address, use the
`email.util.getaddresses` function to deal with cases
where multiple recipients are included in the email header
or the stream address appears as an angle-addr with a
name given (e.g. if someone added it to their address book).
Added some other headers where the required address may
appear: "Resent" headers are sometimes used for forwarding,
and streams may also be found in CC. There is no way to find
the address if the email was recieved as a BCC.
This library was absolutely essential as part of our Python 2->3
migration process, but all of its calls should be either no-ops or
encode/decode operations.
Note also that the library has been wrong since the incorrect
refactoring in 1f9244e060.
Fixes#10807.
Change the truncation marker from `...` to `\n[message truncated]`
when receiving messages from the API or through e-mail. Also, update
tests to account for the new change.
Fix#10871.
Generally emails are not written with markdown in mind and hence
sometimes render in strange ways. This commit fixes a particular
issue that was causing whitespace before paragraphs to be treated
as code block due to which email content was being rendered in a
box that scrolls in right direction a lot.
Fixes: #7045.
They're rarely useful, usually displayed invisibly in most tools
anyway, and this helps make sure the message makes it into Zulip
rather than being rejected.
Redis and the Redis client know nothing but bytes. When we take a
`bytes` object it returns and pass it down as `subject` here, it
causes an exception deep inside message processing if the realm has
any filters, when `bugdown.subject_links` attempts to search the
subject for the filters, which are of course `str` patterns.
For symmetry, make the conversion to bytes on the storing side
explicit too.
Tim Abbott
Mateusz Mandera
Anders Kaseorg
Gaurav Pandey
palash
Emilio López
Anders Kaseorg
Udit107710
Emilio López
Mateusz Mandera
Steve Howell
Tim Abbott
Eeshan Garg
Anders Kaseorg
Tom Daff
Marco Burstein
Aditya Bansal
Puneeth Chaganti
rht
neiljp (Neil Pilgrim)
Robert Hönig
Harshit Bansal
Greg Price
Rishi Gupta