Otherwise, the useradd command will fail during the DigitalOcean
1-Click App installation because the install script is called
twice during the whole process. Plus the Zulip install script
is designed to be idempotent and this bug compromises that.
The value is a holdover from when it controlled runtime behavior,
which it no longer does.
Stop taking a DEPLOYMENT_TYPE, which is unused; the python code only
care about if the option exists, not its value.
These are more correct to the sense of "is this a service we
configured for Zulip", and removes potential confusion around the 0/1
values being backwards from how binary is usually interpreted.
Using checks of `,$PUPPET_CLASSES,` is repetitive and error-prone; it
does not properly deal with `zulip_ops::` classes, for instance, which
include the `zulip::` classes.
As alluded to in ca9d27175b, this can be fixed by inspecting the
classes that would be applied, using `puppet --write-catalog-summary`.
We work around the chicken-and-egg problem alluded to therein by
writing out as complete `zulip.conf` as would be necessary, before
running puppet and removing the sections we then know to not be
needed.
Unfortunately, there are two checks for `$PUPPET_CLASSES` which cannot
be switched to this technique, as they concern errors that we wish to
catch quite early, and thus before we have puppet installed. Since we
expect failures of those to only concern warnings, and only be
mistakenly omitted for internal `zulip_ops::` classes, this seems a
reasonable risk to admit in exchange for catching common errors early.
When supervisor is first installed, it is started automatically, and
creates the socket, owned by root. Subsequent reconfiguration in
puppet only calls `reread + update`, which is insufficient to apply
the `chown = zulip:zulip` line in `supervisord.conf`, leaving the
socket owned by `root` and the last part of the installation unable to
restart `supervisor` services as the `zulip` user. The `chown` line
in `scripts/lib/install` exists to paper over this.
Add a separate exec target for changes to `supervisord.conf` itself,
which restarts the full service. This leaves the default `restart`
action on the service for the lightweight `reread + update` action,
which is more common.
We use `systemctl` only on redhat-esque builds, because CI runs
Ubuntu, but init is not systemd in that context. `systemctl reload`
is sufficient to re-apply the socket ownership, but a full `restart`
and not `reload` is necessary under `/etc/init.d/supervisor`.
49a7a66004 and immediately previous commits began installing
PostgreSQL 12 from their apt repository. On machines which already
have the distribution-provided version of PostgreSQL installed,
however, this leads to failure to apply puppet when restarting
PostgreSQL 12, as both attempt to claim the same port.
During installation, if we will be installing PostgreSQL, look for
other versions than what we will install, and abort if they are
found. This is safer than attempting to automatically uninstall or
reconfigure existing databases.
This allows for installing from-scratch with a different pinned
version of PostgreSQL, and provides a single place to change when the
default should increase.
Using `/etc/init.d/postgresql` as the detection of if Postgres is on
the server is incorrect, because this line runs _before_ puppet and
any packages are installed. Thus, it cannot tell the difference
between a new Ubuntu one-host first-time-install without PostgreSQL
yet, and one which is merely a front-end and will never have
PostgreSQL. This leads to failures in first-time installs:
```
Error: Evaluation Error: Error while evaluating a Function Call,
Could not find template 'zulip/postgresql//postgresql.conf.template.erb'
```
The only way to detect if PostgreSQL will be present in the _end_
state of the install is to examine the puppet classes that are
applied.
To do this, we must inspect `PUPPET_CLASSES`. Unfortunately, this can
be fragile to subclassing (e.g. `zulip_ops::postgres_appdb`). We
might desire to use `puppet apply --write-catalog-summary` to deduce
the _applied_ classes, which would unroll the inheritance; however,
this causes a chicken-and-egg problem, because `zulip.conf` must be
already written out (including a value for `postgresql.version`, if
necessary!) before such a puppet run could successfully complete.
Switch to predicating the `postgresql.version` key on the puppet
classes that are known to install postgres.
Support for Xenial and Stretch was removed (5154ddafca, 0f4b1076ad,
8944e0ad53, 79acd5ae40, 1219a2e854), but not all codepaths were
updated to remove their conditionals on it.
Remove all code predicated on Xenial or Stretch. debathena support
was migrated to Bionic, since that appears to be the current state of
existing debathena servers.
0f4b1076ad removed Ubuntu 16.04 "xenial" and Debian 9 "stretch" from
the printed list of supported operating systems, but left them in the
verification check that controls if that message is printed,
effectively continuing to support them.
Conversely, 439f0d3004 added Ubuntu 20.04 "focal" to the check, but
not to the printed list.
Synchronize to check and print the right supported distributions:
Ubuntu 18.04 "bionic", Ubuntu 20.04 "focal", and Debian 10 "buster".
The previous commit removed the only behavior difference between the
two flags; both of them skip user/database creation, and the tables
therein.
Of the two options `--no-init-db` is more explicit as to what it does,
as opposed to just one facet of when it might be used; remove
`--remote-postgres`.
Since `--postgres-missing-dictionaries` edits `/etc/zulip/zulip.conf`,
it interferes with the intent of `--no-overwrite-settings`.
Make the two settings conflict, to prevent this unclear state.
The `--no-init-db` option previously only controlled if
`initialize-database` was run, which sets up the tables inside the
database. If PostgreSQL was installed locally, it still attempted to
create the user and empty database.
This fails on hosts which are remote PostgreSQL hosts, and not
application hosts, as:
- They may already have a local database, and while
`initialize-datbase` will detect and offer to abort if one is
found,`--no-init-db` seems like it should be the option to not
overwrite it
- `flush-memcached` requires that a local venv be installed, which it
often is not on non-frontend machines.
Skip the database configuration when run with `--no-init-db`.
Since we now support Postgres versions from 10 to 12, we might as well
have new installations start on Postgres 12 to avoid unnecessary
migration/upgrade work.
We would prefer to use the postgres packages from Postgres themselves,
if available. However, this requires ensures that, for existing
installs, we preserve the same version of postgres as their base
distribution installed.
Move the version-determination logic from being computed at puppet
interpolation time, to being computed at install time and pinned into
zulip.conf.
These files can’t use f-strings yet because they need to run in Python
2 or Python 3.5.
Generated by pyupgrade.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Generated by pyupgrade --py36-plus --keep-percent-format.
Now including %d, %i, %u, and multi-line strings.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
certbot-auto doesn’t work on Ubuntu 20.04, and won’t be updated; we
migrate to instead using the certbot package shipped with the OS
instead. Also made sure that sure certbot gets installed when running
zulip-puppet-apply, to handle existing systems.
We already override the umask in upgrade-zulip-stage-2, but that’s too
late since we’ve already written a bunch of files in stage 1. I would
have removed the stage 2 override, but the OS upgrade documentation
references running stage 2 directly.
Fixes#15164. Note that an affected installation will need to upgrade
twice, because the first upgrade uses the old stage 1.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Vishnu KS
Tim Abbott
Alex Vandiver
Anders Kaseorg
Aman Agrawal
Anders Kaseorg
arpit551
rht