Translators benefit from the extra information in the field names, and
need the reordering freedom that isn’t available with multiple
positional fields.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Note that we use the DjangoJSONEncoder so that we have builtin support
for parsing Decimal and datetime.
During this intermediate state, the migration that creates
extra_data_json field has been run. We prepare for running the backfilling
migration that populates extra_data_json from extra_data.
This change implements double-write, which is important to keep the
state of extra data consistent. For most extra_data usage, this is
handled by the overriden `save` method on `AbstractRealmAuditLog`, where
we either generates extra_data_json using orjson.loads or
ast.literal_eval.
While backfilling ensures that old realm audit log entries have
extra_data_json populated, double-write ensures that any new entries
generated will also have extra_data_json set. So that we can then safely
rename extra_data_json to extra_data while ensuring the non-nullable
invariant.
For completeness, we additionally set RealmAuditLog.NEW_VALUE for
the USER_FULL_NAME_CHANGED event. This cannot be handled with the
overridden `save`.
This addresses: https://github.com/zulip/zulip/pull/23116#discussion_r1040277795
Note that extra_data_json at this point is not used yet. So the test
cases do not need to switch to testing extra_data_json. This is later
done after we rename extra_data_json to extra_data.
Double-write for the remote server audit logs is special, because we only
get the dumped bytes from an external source. Luckily, none of the
payload carries extra_data that is not generated using orjson.dumps for
audit logs of event types in SYNC_BILLING_EVENTS. This can be verified
by looking at:
`git grep -A 6 -E "event_type=.*(USER_CREATED|USER_ACTIVATED|USER_DEACTIVATED|USER_REACTIVATED|USER_ROLE_CHANGED|REALM_DEACTIVATED|REALM_REACTIVATED)"`
Therefore, we just need to populate extra_data_json doing an
orjson.loads call after a None-check.
Co-authored-by: Zixuan James Li <p359101898@gmail.com>
This adds support to accepting extra_data being dict from remote
servers' RealmAuditLog entries. So that it is forward-compatible with
servers that have migrated to use JSONField for RealmAuditLog just in
case. This prepares us for migrating zilencer's audit log models to use
JSONField for extra_data.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Servers that had upgraded from a Zulip server version that did not yet
support the user_uuid field to one that did could end up with some
mobile devices having two push notifications registrations, one with a
user_id and the other with a user_uuid.
Fix this issue by sending both user_id and user_uuid, and clearing
This commit updates the pattern for dealing with tuples
returned by the delete() query.
The '(num_deleted, ignored) = ModelName.objects.filter().delete()'
pattern is preferred due to better readability.
We avoid the pattern '(num_deleted, _)' because Django uses _
for translation, which may lead to future bugs.
`remote_server_path` allows us to get rid of all the `validate_entity`
calls in `zilencer.views` and remove all the `Union` type annotations
in the signatures of the authenticated view functions.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This is the first step to making the full switch to self-hosted servers
use user uuids, per issue #18017. The old id format is still supported
of course, for backward compatibility.
This commit is separate in order to allow deploying *just* the bouncer
API change to production first.
This reverts bc15085098 (which provided
not justification for its change) and moves further, down to 2 retries
from the default of 5.
10 retries, with exponential backoff, is equivalent to sleeping 2^11
seconds, or just about 34 minutes (though the code uses a jitter which
may make this up to 51 minutes). This is an unreasonable amount of
time to spend in this codepath -- as only one worker is used, and it
is single-threaded, this could effectively block all missed message
notifications for half an hour or longer.
This is also necessary because messages sent through the push bouncer
are sent synchronously; the sending server uses a 30-second timeout,
set in PushBouncerSession. Having retries which linger longer than
this can cause duplicate messages; the sending server will time out
and re-queue the message in RabbitMQ, while the push bouncer's request
will continue, and may succeed.
Limit to 2 retries (APNS currently uses 3), and results expected max
of 4 seconds of sleep, potentially up to 6. If this fails, there
exists another retry loop above it, at the RabbitMQ layer (either
locally, or via the remote server's queue), which will result in up to
3 additional retries -- all told, the request will me made to FCM up
to 12 times.
Adds request as a parameter to json_success as a refactor towards
making `ignored_parameters_unsupported` functionality available
for all API endpoints.
Also, removes any data parameters that are an empty dict or
a dict with the generic success response values.
APNs payloads nest the zulip-custom data further than the top level,
as Android notifications do. This led to APNs data silently never
being truncated; this case was not caught in tests because the mocks
provided the wrong data for the APNs structure.
Adjust to look in the appropriate place within the APNs data, and
truncate that.
As explained in the comments in the code, just doing UUID(string) and
catching ValueError is not enough, because the uuid library sometimes
tries to modify the string to convert it into a valid UUID:
>>> a = '18cedb98-5222-5f34-50a9-fc418e1ba972'
>>> uuid.UUID(a, version=4)
UUID('18cedb98-5222-4f34-90a9-fc418e1ba972')
This makes logging more consistent between FCM and APNs codepaths, and
makes clear which user-ids are for local users, and which are opaque
integers namespaced from some remote zulip server.
Being able to determine how many distinct users are getting push
notifications per remote host is useful, as is the distribution of
device counts. This parallels the log line in
handle_push_notification for push notifications from local realms,
handled via the event queue.
JsonableError has two major benefits over json_error:
* It can be raised from anywhere in the codebase, rather than
being a return value, which is much more convenient for refactoring,
as one doesn't potentially need to change error handling style when
extracting a bit of view code to a function.
* It is guaranteed to contain the `code` property, which is helpful
for API consistency.
Various stragglers are not updated because JsonableError requires
subclassing in order to specify custom data or HTTP status codes.
django.utils.translation.ugettext is a deprecated alias of
django.utils.translation.gettext as of Django 3.0, and will be removed
in Django 4.0.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This makes it much more clear that this feature does JSON encoding,
which previously was only indicated in the documentation.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
datetime.timezone is available in Python ≥ 3.2. This also lets us
remove a pytz dependency from the PostgreSQL scripts.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This includes adding a new endpoint to the push notification bouncer
interface, and code to call it appropriately after resetting a user's
personal API key.
When we add support for a user having multiple API keys, we may need
to add an additional key here to support removing keys associated with
just one client.
Then, find and fix a predictable number of previous misuses.
With a small change by tabbott to preserve backwards compatibility for
sending `yes` for the `forged` field.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
One small change in behavior is that this creates an array with all the
row_objects at once, rather than creating them 1000 at a time.
That should be fine, given that the client batches these in units of
10000 anyway, and so we're just creating 10K rows of a relatively
small data structure in Python code here.
This provides a clean warning and 40x error, rather than a 500, for
this corner case which is very likely user error.
The test here is awkward because we have to work around
https://github.com/zulip/zulip/issues/12362.
This adds a new API for sending basic analytics data (number of users,
number of messages sent) from a Zulip server to the Zulip Cloud
central analytics database, which will make it possible for servers to
elect to have their usage numbers counted in published stats on the
size of the Zulip ecosystem.
Now that we allow multiple users to have registered the same token, we
need to configure calls to unregister tokens to only query the
targeted user_id.
We conveniently were already passing the `user_id` into the push
notification bouncer for the remove API, so no migration for older
Zulip servers is required.
Previously, Zulip did not correctly handle the case of a mobile device
being registered with a push device token being registered for
multiple accounts on the same server (which is a common case on
zulipchat.com). This was because our database `unique` and
`unique_together` indexes incorrectly enforced the token being unique
on a given server, rather than unique for a given user_id.
We fix this gap, and at the same time remove unnecessary (and
incorrectly racey) logic deleting and recreating the tokens in the
appropriate tables.
There's still an open mobile app bug causing repeated re-registrations
in a loop, but this should fix the fact that the relevant mobile bug
causes the server to 500.
Follow-up work that may be of value includes:
* Removing `ios_app_id`, which may not have much purpose.
* Renaming `last_updated` to `data_created`, since that's what it is now.
But none of those are critical to solving the actual bug here.
Fixes#8841.
There are several situations in which we want to create a Customer and
stripe.Customer object before we really have a billing relationship with a
customer. The main one is giving non-profit or educational discounts.
We've had this sort of logic for GCM for a long time; it's worth
adding for APNS as well.
Writing this is a bit of a reminder that I'm not a fan of how our unit
tests for push notifications work.
This completes the separation of our logic for managing Stripe
customers from the view code for the billing page.
As we add more features to our Customer model and to our Stripe
integration, we might further separate those two things; but for now
they're nearly synonymous and there's no problem in them being mixed
together.
Pull the code that talks to Stripe out into its own functions.
In a followup commit we'll move these to a separate file, as well
as the error-handling logic that remains in the view function
for now.
Also fix the translation markings: the translated string must be a
constant (e.g. a format string), or else translation is impossible.
Viewing with `-b` shows the few changes that happen in the logic
as it moves out of the view function; viewing without shows the
few changes in the rest of the view function.
Several changes:
* De-duplicate code for different error types.
* No need to list lots of error subtypes where we aren't treating
them differently; StripeError is the base class of them all.
* Unexpected, non-Stripe-related, exceptions we can handle in the normal
way. Just make them show up in the billing-specific log too.
* The Stripe client library already logs type, code, param, and message
before raising an error, so we don't need to repeat those; just add the
HTTP status code (because it's not there already and sure why not),
and the Python exception type the client library chose to raise
in case that makes things a bit easier to interpret.
Normal server admins will never run this code, and zulipchat.com will
have this information configured before users see it, so this message
is really just for development.
Stripe Checkout means using JS code provided by Stripe to handle
almost all of the UI, which is great for us.
There are more features we should add to this page and changes we
should make, but this gives us an MVP.
[greg: expanded commit message; fixed import ordering and some types.]
And it works!
A couple of things still to do:
* When a device token is no longer active, we'll get HTTP status 410.
We should then remove the token from the database so we don't keep
trying to push to it. This is fairly urgent.
* The library we're using has a nice asynchronous API, but this
version doesn't use it. This is OK now, but async will be
essential at scale.
Anders Kaseorg
Zixuan Li
Zixuan James Li
Mateusz Mandera
Prakhar Pratyush
Alex Vandiver
Lauryn Menard
Eeshan Garg
PIG208
Hashir Sarwar
Anders Kaseorg
Tim Abbott
Rishi Gupta
Greg Price
Anders Kaseorg
Vishnu Ks
Aditya Bansal
Brock Whittaker
Viraat Chandra
rht
Greg Price