Updates the API error response when there is an unknown or
deactivated user in the `principals` parameter for either the
`/api/subscribe` or `/api/unsubscribe` endpoints. We now use
the `access_user_by_email` and `access_user_by_id` code paths,
which return an HTTP response of 400 and a "BAD_REQUEST" code.
Previously, an HTTP response of 403 was returned with a special
"UNAUTHORIZED_PRINCIPAL" code in the error response. This code
was not documented in the API documentation and is removed as
a potential JsonableError code with these changes.
Fixes#26593.
We can directly get the realm object from Message object now
and there is no need to get the realm object from "sender"
field of Message object.
After this change, we would not need to fetch "sender__realm"
field using "select_related" and instead only passing "realm"
to select_related when querying Message objects would be enough.
This commit also updates a couple of cases to directly access
realm ID from message object and not message.sender. Although
we have fetched sender object already, so accessing realm_id
from message directly or from message.sender should not matter,
but we can be consistent to directly get realm from Message
object whenever possible.
We set stream_weekly_traffic field to "null" for Subscription
objects in zephyr mirror realm as we do not need stream traffic
data in zephyr mirror realm. This makes the subscription data
consistent with steams data.
This commit also udpates test to check never_subscribed data for
zephyr mirror realm.
This migration applies under the assumption that extra_data_json has
been populated for all existing and coming audit log entries.
- This removes the manual conversions back and forth for extra_data
throughout the codebase including the orjson.loads(), orjson.dumps(),
and str() calls.
- The custom handler used for converting Decimal is removed since
DjangoJSONEncoder handles that for extra_data.
- We remove None-checks for extra_data because it is now no longer
nullable.
- Meanwhile, we want the bouncer to support processing RealmAuditLog entries for
remote servers before and after the JSONField migration on extra_data.
- Since now extra_data should always be a dict for the newer remote
server, which is now migrated, the test cases are updated to create
RealmAuditLog objects by passing a dict for extra_data before
sending over the analytics data. Note that while JSONField allows for
non-dict values, a proper remote server always passes a dict for
extra_data.
- We still test out the legacy extra_data format because not all
remote servers have migrated to use JSONField extra_data.
This verifies that support for extra_data being a string or None has not
been dropped.
Co-authored-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
We remove bot's subscriptions for private streams to which the
new owner is not subscribed and keep the ones to which the new
owner is subscribed on changing owner.
This commit also changes the code for sending subscription
remove events to use transaction.on_commit since we call
the function inside a transactopn in do_change_bot_owner and
this also requires some changes in tests in test_events.
In this commit, we introduce a new option in the stream creation
UI - a 'Default stream for new users' checkbox. By default, the
checkbox is set to 'off' and is only visible to admins. This
allow admins to easily designate a stream as the default stream
for new users during stream creation.
Fixes#24048.
This commit adds a 'Default stream for new users' checkbox in
the stream editing UI to allow admins to easily add or remove
a stream as the default stream for new users. Previously, this
functionality required navigating to separate menu.
Fixes a part of #24048.
This commit adds code to pass stream traffic data using
the "stream_weekly_traffic" field in stream objects.
We already include the traffic data in Subscription objects,
but the traffic data does not depend on the user to stream
relationship and is stream-only information, so it's better
to include it in Stream objects. We may remove the traffic
data and other stream information fields for Subscription
objects in future.
This will help clients to correctly display the stream
traffic data in case where client receives a stream
creation event and no subscription event, for an already
existing stream which the user did not have access to before.
Earlier the API endpoints related to streams accepts and returns a
field `can_remove_subscribers_group_id` which represents the ID
of user_group whose members can remove subscribers from stream.
This commit renames this field to `can_remove_subscribers_group`.
This commit updates the select_related calls in queries to get
UserProfile objects in get_user, get_user_by_delivery_email,
get_user_profile_by_id, get_user_profile_by_id_in_realm and
get_user_profile_by_api_key functions to pass "realm" and
"bot_owner" as arguments to select_related call.
These functions are used in different parts of code to get
the UserProfile object and realm is accessed using the user
object at many places.
"bot_owner" field is also used in some places like to check
whether a bot can access a stream, to check whether a user
can change modify another user, in webhooks code to send the
message to the bot owner, and in tests as well. There can be
some places where the bot owner is not required and in most
such cases the code would only be accessed for human users,
which means the bot_owner will be null for these cases and
would avoid complexity and performance issues.
Note that previously, no arguments were passed to select_related
and thus only realm field was fetched during the query.
We did not send the stream creation events when subscribing
guests to public streams while we do send them when subscribing
non-admin users to private streams.
This commit adds code to send the stream creation events when
subscribing guests to public streams, so the clients can know
that the stream exists and fixes the bug where client tries
to process a subscription add event for a stream which it does
not know about.
This commit removes "@" from name of role-based system groups
since we have added a restricion on having user group names
starting with "@" in the previous commit as they look odd in
mention syntax.
We also add a migration in this commit to update the name of
role-based system groups in existing realms to remove "@"
from the name. This migration also updates the names of
non-system user groups by removing the invalid prefixes
from their names and if there is a group already with that
name, we insted name the group as "group:{group_id}".
Fixes#26148.
This changes bulk_get_streams so that it just uses the
database all the time. Also, we avoid calling
select_related(), so that we just get back thin and
tidy Stream objects with simple queries.
About not caching any more:
It's actually pretty rare that we fetch streams by name
in the main application. It's usually API requests that
send in stream names to find more info about streams.
It also turns out that for large queries (>= ~30 rows
for my measurements) it's more efficent to hit the
database than memcached. The database is super fast at
scale; it's just the startup cost of having Django
construct the query, and then having the database do
query planning or whatever, that slows us down. I don't
know the exact bottleneck, but you can clearly measure
that one-row queries are slow (on the order of a full
millisecond or so) but the marginal cost of additional
rows is minimal assuming you have a decent index (20
microseconds per row on my droplet).
All the query-count changes in the tests revolve around
unsubscribing somebody from a stream, and that's a
particularly odd use case for bulk_get_streams, since
you generally unsubscribe from a single stream at a
time. If there are some use cases where you do want to
unsubscribe from multiple streams, we should move
toward passing in stream ids, at least from the
application. And even if we don't do that, our cost for
most queries is a couple milliseconds.
At least as measured by test_events.py, which has over 1000
calls to fetch initial data for page loads, this should
be about a 10% improvement in how much time the server
spends fetching data.
We mostly avoid a select_related() query that did this nastiness:
INNER JOIN "zerver_realm" ON ("zerver_stream"."realm_id" = "zerver_realm"."id")
INNER JOIN "zerver_usergroup" ON ("zerver_stream"."can_remove_subscribers_group_id" = "zerver_usergroup"."id")
INNER JOIN "zerver_realm" T4 ON ("zerver_usergroup"."realm_id" = T4."id")
INNER JOIN "zerver_usergroup" T5 ON ("zerver_usergroup"."can_mention_group_id" = T5."id")
INNER JOIN "zerver_realm" T6 ON (T5."realm_id" = T6."id")
INNER JOIN "zerver_usergroup" T7 ON (T5."can_mention_group_id" = T7."id")
INNER JOIN "zerver_realm" T8 ON (T7."realm_id" = T8."id")
INNER JOIN "zerver_usergroup" T9 ON (T7."can_mention_group_id" = T9."id")
INNER JOIN "zerver_realm" T10 ON (T9."realm_id" = T10."id")
INNER JOIN "zerver_usergroup" T11 ON (T9."can_mention_group_id" = T11."id")
WHERE "zerver_stream"."id" IN (SELECT U0."stream_id" FROM "zerver_defaultstream" U0 WHERE U0."realm_id" = 2
Future commits will address the codepath for creating users.
I created zerver/lib/default_streams.py, so that various
views and events.py don't have to awkwardly reach into
an "actions" file.
I copied over two functions verbatim from actions/default_streams.py:
get_default_streams_for_realm
streams_to_dicts_sorted
The latter only remains as an internal detail in the new library.
I also created two new helpers:
get_default_stream_ids_for_realm:
This is both faster and easier to use in all the places
where we only need to get a set of default stream ids.
get_default_streams_for_realm_as_dicts:
This just wraps the prior calls to
streams_to_dicts_sorted(get_default_streams_for_realm(...)),
and it doesn't yet address the slowness of the underlying
code.
All the "real" code should be functionally the same.
In a few tests I now use this wrapper instead of
calling get_default_streams_for_realm, just to get
slightly deeper coverage.
Earlier when a user who is not allowed to add subscribers to a
stream because of realm level setting "Who can add users to streams"
is subscribing other users while creating a new stream than new stream
was created but no one is subscribed to stream.
To fix this issue this commit makes changes in the API used
for adding subscriptions. Now stream will be created only when user
has permissions to add other users.
With a rewrite of the test by Tim Abbott.
This commit renames the 'tornado_redirected_to_list' context
manager to 'capture_send_event_calls' to improve readability.
It also refactors the function to yield a list of events
instead of passing in a list data structure as a parameter
and appending events to it.
"check_add_user_group" is a safer helper function than
"create_user_group" to use when creating user_groups. It does
error handling and notify the client with the appropriate event.
Note that the populate_db command still uses "create_user_group"
because we do not need to enqueue events at that point.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Since this function creates a new user group into the database,
it is more appropriate to have it not as a generic "lib" function
but as an "action".
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
The Django convention is for __repr__ to include the type and __str__
to omit it. In fact its default __repr__ implementation for models
automatically adds a type prefix to __str__, which has resulted in the
type being duplicated:
>>> UserProfile.objects.first()
<UserProfile: <UserProfile: emailgateway@zulip.com <Realm: zulipinternal 1>>>
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This commit renames reset_emails_in_zulip_realm function to
reset_email_visibility_to_everyone_in_zulip_realm which makes
it more clear to understand what the function actually does.
This commit also adds a comment explaining what this function
does.
We add stream_permission_group_settings object which is
similar to property_types framework used for realm settings.
This commit also adds GroupPermissionSetting dataclass for
defining settings inside stream_permission_group_settings.
We add "do_change_stream_group_based_setting" function which
is called in loop to update all the group-based stream settings
and it is now used to update 'can_remove_subscribers_group'
setting instead of "do_change_can_remove_subscribers_group".
We also change the variable name for event_type field of
RealmAuditLog objects to STREAM_GROUP_BASED_SETTING_CHANGED
since this will be used for all group-based stream settings.
'property' field is also added to extra_data field to identify
the setting for which RealmAuditLog object was created.
We will add a migration in further commits which will add the
property field to existing RealmAuditLog objects created for
changing can_remove_subscribers_group setting.
Black 23 enforces some slightly more specific rules about empty line
counts and redundant parenthesis removal, but the result is still
compatible with Black 22.
(This does not actually upgrade our Python environment to Black 23
yet.)
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This guarantees that the Realm is always non-None when we hit the
codepath is_static_or_current_realm_url via
do_change_stream_description, so that we can properly skip rewritting
some images.
Fixes#19405
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This adds a helper based on testing patterns of using the "queries_captured"
context manager with "assert_length" to check the number of queries
executed for preventing performance regression.
It explains the rationale of checking the query count through an
"AssertionError" and prints the queries captured as assert_length does,
but with a format optimized for displaying the queries in a more
readable manner.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Current value of can_remove_subscribers_group field is admins system group
only so behavior is not changed. We would provide support to change this
setting from API and UI in further commits.
This commit sets can_remove_subscribers_group to admins system
group while creating streams as it will be the default value
of this setting. In further we would provide an option to set
value of this setting to any user group while creating streams
using API or UI.
In Zulip 2.1.0, the `is_muted` stream subscription property was
added and replaced the `in_home_view` property. But the server has
still only been sending subscription update events with the
`in_home_view` property.
Updates `do_change_subscription_property` to send a subscription
update event for both `is_muted` and `in_home_view`, so that
clients can fully migrate away from using `in_home_view` allowing
us to eventually remove it completely.
We now allow changing access to history of the stream by only passing
"history_public_to_subscribers" parameter. Previously, "is_private"
parameter was also required to change history_public_to_subscribers
otherwise the request was silently ignored.
We also raise error when only history_public_to_subscribers parameter
is passed with value False without "is_private: True" for a public
or web-public stream since we do not allow public streams with
protected history.
Lauryn Menard
Sahil Batra
Zixuan James Li
Steve Howell
Hemant Umre
Anders Kaseorg
Ujjawal Modi
Alex Vandiver
AcKindle3
Prakhar Pratyush
yogesh sirsat