Earlier, we were using 'send_event' in 'do_regenerate_api_key'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Earlier, we were using 'send_event' in 'do_change_full_name'
which can lead to a situation, if any db operation is added after
the 'send_event' in future, where we enqueue events but the action
function fails at a later stage.
Events should not be sent until we know we're not rolling back.
Fixes part of #30489.
Previously, if someone changed the font-size or line height
settings to some value other than the legacy values, we set
dense_mode to False if it was True. This commit changes the
code to require clients to pass dense_mode as False in such
cases and raise an error otherwise.
We should flush the cache after commiting changes to DB to
make sure that the cache does not contain stale data when
updating multiple settings in a single request.
Hash the salt, user-id, and now avatar version into the filename.
This allows the URL contents to be immutable, and thus to be marked as
immutable and cacheable. Since avatars are served unauthenticated,
hashing with a server-side salt makes the current and past avatars not
enumerable.
This requires plumbing the current (or future) avatar version through
various parts of the upload process.
Since this already requires a full migration of current avatars, also
take the opportunity to fix the missing `.png` on S3 uploads (#12852).
We switch from SHA-1 to SHA-256, but truncate it such that avatar URL
data does not substantially increase in size.
Fixes: #12852.
This commit has the mechanism for setting the .last_update_id on the
backend for UserPresence objects, without introducing any API changes.
Therefore this should invisible to clients and able to be deployed
safely without impact to users.
Creating a bot with a name that is already in use
will raise an error. However, by deactivating
the existing bot, creating a new bot with the
same name, and then reactivating the original bot,
it is possible to have multiple bots with the same name.
To fix this, we check if the bot name is already
in use in the active bots list. If it is,
an error will be raised, prompting either the
name of the existing bot to be changed or
the bot to be deactivated.
Co-authored-by: Sujal Shah <sujalshah28092004@gmail.com>
Previously, users were allowed to signup or change their names to
those which already existed in the realm.
This commit adds an Organization Permission, that shall enforce
users to use unique names while signing up or changing their
names. If a same or normalized full name is found in realm,
then a validation error is thrown.
Fixes#7830.
This commit adds code to make sure that update events for changing
a user's role, email, etc. are not sent to guests who cannot access
the modified user.
Creates process for demo organization owners to add an email address
and password to their account.
Uses the same flow as changing an email (via user settings) at the
beginning, but then sends a different email template to the user
for the email confirmation process.
We also encourage users to set their full name field in the modal for
adding an email in a demo organization. We disable the submit button
on the form if either input is empty, email or full name.
When the user clicks the 'confirm and set password' button in the
email sent to confirm the email address sent via the form, their
email is updated via confirm_email_change, but the user is redirected
to the reset password page for their account (instead of the page for
confirming an email change has happened).
Once the user successfully sets a password, then they will be
prompted to log in with their newly configured email and password.
This migration applies under the assumption that extra_data_json has
been populated for all existing and coming audit log entries.
- This removes the manual conversions back and forth for extra_data
throughout the codebase including the orjson.loads(), orjson.dumps(),
and str() calls.
- The custom handler used for converting Decimal is removed since
DjangoJSONEncoder handles that for extra_data.
- We remove None-checks for extra_data because it is now no longer
nullable.
- Meanwhile, we want the bouncer to support processing RealmAuditLog entries for
remote servers before and after the JSONField migration on extra_data.
- Since now extra_data should always be a dict for the newer remote
server, which is now migrated, the test cases are updated to create
RealmAuditLog objects by passing a dict for extra_data before
sending over the analytics data. Note that while JSONField allows for
non-dict values, a proper remote server always passes a dict for
extra_data.
- We still test out the legacy extra_data format because not all
remote servers have migrated to use JSONField extra_data.
This verifies that support for extra_data being a string or None has not
been dropped.
Co-authored-by: Siddharth Asthana <siddharthasthana31@gmail.com>
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
We do not use any related fields for the UserProfile objects
fetched by get_active_users, so we can simply remove the
select_related call.
The user object from get_active_users was used to get realm
but since get_active_users called from a realm object we can
directly use that realm object. This change also leads to
some changes in the cache code where we now pass the realm
to the function instead of selecting it from UserProfile object.
django-stubs 4.2.1 gives transaction.on_commit a more accurate type
annotation, but this exposed that mypy can’t handle the lambda default
parameters that we use to recapture loop variables such as
for stream_id in public_stream_ids:
peer_user_ids = …
event = …
transaction.on_commit(
lambda event=event, peer_user_ids=peer_user_ids: send_event(
realm, event, peer_user_ids
)
)
https://github.com/python/mypy/issues/15459
A workaround that mypy accepts is
transaction.on_commit(
(
lambda event, peer_user_ids: lambda: send_event(
realm, event, peer_user_ids
)
)(event, peer_user_ids)
)
But that’s kind of ugly and potentially error-prone, so let’s make a
helper function for this very common pattern.
send_event_on_commit(realm, event, peer_user_ids)
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Note that we use the DjangoJSONEncoder so that we have builtin support
for parsing Decimal and datetime.
During this intermediate state, the migration that creates
extra_data_json field has been run. We prepare for running the backfilling
migration that populates extra_data_json from extra_data.
This change implements double-write, which is important to keep the
state of extra data consistent. For most extra_data usage, this is
handled by the overriden `save` method on `AbstractRealmAuditLog`, where
we either generates extra_data_json using orjson.loads or
ast.literal_eval.
While backfilling ensures that old realm audit log entries have
extra_data_json populated, double-write ensures that any new entries
generated will also have extra_data_json set. So that we can then safely
rename extra_data_json to extra_data while ensuring the non-nullable
invariant.
For completeness, we additionally set RealmAuditLog.NEW_VALUE for
the USER_FULL_NAME_CHANGED event. This cannot be handled with the
overridden `save`.
This addresses: https://github.com/zulip/zulip/pull/23116#discussion_r1040277795
Note that extra_data_json at this point is not used yet. So the test
cases do not need to switch to testing extra_data_json. This is later
done after we rename extra_data_json to extra_data.
Double-write for the remote server audit logs is special, because we only
get the dumped bytes from an external source. Luckily, none of the
payload carries extra_data that is not generated using orjson.dumps for
audit logs of event types in SYNC_BILLING_EVENTS. This can be verified
by looking at:
`git grep -A 6 -E "event_type=.*(USER_CREATED|USER_ACTIVATED|USER_DEACTIVATED|USER_REACTIVATED|USER_ROLE_CHANGED|REALM_DEACTIVATED|REALM_REACTIVATED)"`
Therefore, we just need to populate extra_data_json doing an
orjson.loads call after a None-check.
Co-authored-by: Zixuan James Li <p359101898@gmail.com>
We now allow users to change email address visibility setting
on the "Terms of service" page during first login. This page is
not shown for users creating account using normal registration
process, but is useful for imported users and users created
through API, LDAP, SCIM and management commands.
This implements the core of the rewrite described in:
For the backend data model for UserPresence to one that supports much
more efficient queries and is more correct around handling of multiple
clients. The main loss of functionality is that we no longer track
which Client sent presence data (so we will no longer be able to say
using UserPresence "the user was last online on their desktop 15
minutes ago, but was online with their phone 3 minutes ago"). If we
consider that information important for the occasional investigation
query, we have can construct that answer data via UserActivity
already. It's not worth making Presence much more expensive/complex
to support it.
For slim_presence clients, this sends the same data format we sent
before, albeit with less complexity involved in constructing it. Note
that we at present will always send both last_active_time and
last_connected_time; we may revisit that in the future.
This commit doesn't include the finalizing migration, which drops the
UserPresenceOld table.
The way to deploy is to start the backfill migration with the server
down and then start the server *without* the user_presence queue worker,
to let the migration finish without having new data interfering with it.
Once the migration is done, the queue worker can be started, leading to
the presence data catching up to the current state as the queue worker
goes over the queued up events and updating the UserPresence table.
Co-authored-by: Mateusz Mandera <mateusz.mandera@zulip.com>
We previously created RealmAuditLog entries for user notification
settings only. This commit changes the code to create entries for
all user settings. We cannot backfill the entries since we don't
have the data to do that.
This commits update the code to use user-level email_address_visibility
setting instead of realm-level to set or update the value of UserProfile.email
field and to send the emails to clients.
Major changes are -
- UserProfile.email field is set while creating the user according to
RealmUserDefault.email_address_visbility.
- UserProfile.email field is updated according to change in the setting.
- 'email_address_visibility' is added to person objects in user add event
and in avatar change event.
- client_gravatar can be different for different users when computing
avatar_url for messages and user objects since email available to clients
is dependent on user-level setting.
- For bots, email_address_visibility is set to EVERYONE while creating
them irrespective of realm-default value.
- Test changes are basically setting user-level setting instead of realm
setting and modifying the checks accordingly.
Previously, user objects contained delivery_email field
only when user had access to real email. Also, delivery_email
was not present if visibility setting is set to "everyone"
as email field was itself set to real email.
This commit changes the code to pass "delivery_email" field
always in the user objects with its value being "None" if
user does not have access to real email and real email otherwise.
The "delivery_email" field value is None for logged-out users.
For bots, the "delivery_email" is always set to real email
irrespective of email_address_visibility setting.
Also, since user has access to real email if visibility is set
to "everyone", "delivery_email" field is passed in that case
too.
There is no change in email field and it is same as before.
This commit also adds code to send event to update delivery_email
field when email_address_visibility setting changes to all the
users whose access to emails changes and also changes the code to
send event on changing delivery_email to users who have access
to email.
In zerver.management.commands.logout_all_users,
we pass a values queryset containing the ids into
this function, which is not actually a list. This
broadens the type annotation so that the ValuesQuerySet
is accepted.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
`extra_data` as a `TextField` expects a `str`, but we had been passing
`dict` instead. This is a temporary solution before #18391 to fix the
type annotation.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Lauryn Menard
Prakhar Pratyush
Sahil Batra
Anders Kaseorg
Alex Vandiver
Mateusz Mandera
Sahil Singh
roanster007
Zixuan James Li
Zixuan Li
Tim Abbott
Adam Sah