We've been getting reports for a few months of folks coming back to
their Zulip window after a night's sleep and finding it scrolled to
the bottom, past dozens or hundreds of messages that they haven't
read. Oddly, the pointer is actually still located where it should be
(verifiable by hitting the Up key), but it's too late: everything
below gets marked as read because bottom_whitespace is in view.
There's only a few places in the zulip codebase where we scroll the
page down, and this is the main one of them. My best theory for what
could be happening is that the browser is, in its overnight
power-saving mode, not granting the Zulip window the resources to
actually repaint the early scrolls. This, in turn, would cause
scrolling down to happen that is not limited by the need to keep the
pointer in view.
I don't think that this fully closes the issue; ideally, we'd have a
reproducer and much more precise detection logic for this situation,
but it should mostly resolve the problem with likely no user-facing
visible harm.
This reverts commit ba8dc62132.
As best I can tell, the old configuration was correct for what Django
wanted. Further testing is required, but this at least brings
.tx/config to match the actual filenames; I think our Chinese
translations have been broken until now.
This commit combines a `tx pull` with updating the translations.json
files to change the values of those items whose key is equal to the
value. The new value is an empty string.
Previously we used to mark a key as unstranlated if its value was equal
to it in translations.json. This had an issue because it didn't allow
otherwise valid cases where key was equal to the value.
This commit solves the problem by disallowing an empty string as a valid
translation and then using the empty string as the value for all the
unstranslated keys.
Fixes#5261
This fixes the width of the call-to-action button to be auto, as it
previously was set in the #hero to be 150px which forced the words in
the button to wrap to two lines.
Currently when hovering on an emoji it will focus it, which makes
the browser by default scroll down or up to include the entirity
of the focused element. This corects the scrollTop to what it was
before the focus event adjusted the scroll position.
This is a follow-up to #6869.
Previously, you had to hover over the smaller area where the emoji
image was to select it, whereas the user expectation is that hovering
the emoji's padding should select it as well.
This commit makes the arrow key navigation and mouse hover affect the
same state such that for example if one moves the mouse over some emoji
and then hits down-arrow the cursor will move down by one from where he
left the mouse at rather than beginning from the top-left corner.
Fixes: #6827.
When the iOS keyboard is open and up, the positioning gotten by
getBoundingClientRect will display a `top` value that is short by the
height of the keyboard, which will usually end up placing things north
of the top of the screen.
By changing to jQuery $.fn.offset instead, the positioning appears to
be correct in all cases; iOS keyboard up, down, and desktop usage.
Fixes: #6366.
This will look through all users and not just ones active in the last
three weeks but only when you are searching with the right sidebar
input box.
Fixes: #5775.
The header line-height is too short when it collapses to multiple
lines so this sets the line-height back to "normal" from "30px"
which sets the text further apart.
The min-height for the error pages was not updated to reflect the
height of the new footer, so this updates the value and makes it a
non-scrolling page in most browsers again.
This sets the column width of the upload table actions and size
columns to always be 75 so that the buttons are always in the same
line and take up the least amount of space possible with that
constraint.
This tries to toggle the next item when clicking on an <h2>
in the sidebar, however we want to first check the next item is
an <ul> element, so that we are collapsing or showing a list,
instead of something like an <h2> which currently happens with
the "#guides" element.
This removes the underline on hover and changes the text to get to the
index.
This also changes it to an <h2> tag so that it will be more inline
with the styling of the rest of the sections, but without the
down chevron.
This restyles the headers to make the <h1> more prominent with a line
break below it, and the <h2> to be less prominent with smaller text and
pushed closer to the <p> tags.
This adds a hover state to just the checkmark that makes it darker
than the line hover state that allows a user to know that the
checkmark is allowed to be toggled.
The `have_scrolled_away_from_top` logic goes way back
to November 2012.
Now we unconditionally load older messages when we scroll
to the top of the feed. Before this bug, you could get
"stuck." It was a bit difficult to reproduce, but with
the right combination of render window sizes and batch
sizes, you would hit the home key quickly and hit the top
of the feed in a way that the flag got in the way of
going back in history.
Fixes#6628
We had a bug where once you scrolled back far enough
in the message view, your "window" for rendered messages
would be at the max, and `prepend` was not adjusting
the window correctly. Now we follow the example of
`append` and call `maybe_rerender`.
This partially addresses #6628, where users were
reporting that the home key stopped going up in their
feed. There was another bug at play for that issue
as well, which is fixed in the next commit.
Before this, the home key would go to the first message in our
render window. Now we go to the first message in our local
list of messages. (Note that there may still be older
messages, so it will still often take multiple uses of the
home key to truly get to the top of your feed.)
In the refactoring in 31d3b1ecc0 that
fixed live-updating of the medium-size avatar data, we started just
fetching the normal-size avatar, not the medium-size avatar. We fix
this by changing this code path to pass in the user object and
construct the URL using that.
While we're at it, we switch to using the user ID, not the email, to
construct these avatar URLs.
Previously, we relied on fetching the name of the user from the data
attributes on the individual elements, when we can get a more reliably
up-to-date value from the people.js data structure we're fetching
anyway.
"Mobile push notifications always" is now indented and a
sub-setting of "Mobile push notifications when offline".
It can be selected only when the outer setting is
selected, otherwise it is greyed out.
Fixes#6570.
We've iterated on this code incorrectly something like 3 times now, so
it's worth rewriting it with a lot of comments in a way that makes
sense.
The main actual functional change here is that modified key + enter
now is consistently the opposite of enter (in terms of whether to
provide a newline or send the message) in all cases.
Fixes#6489.
Now that we display the name and aliases of the currently focused
emoji at the bottom of the emoji picker, we don't need to display
the title text for emojis separately.
Fixes: #6111.
Emoji showcase refers to the space at the bottom of the emoji
picker we use for showing name as well as aliases of the currently
focused emoji.
Fixes: #6110.
This hack was used to fix the broken flag emojis in emoji-picker.
It was broken due to the incomplete migration to iamcal dataset.
See issue #4775 for more details.
This commit switches to use sprite sheets for rendering emojis
in all the remaining places, i.e., message bodies and composebox
typeahead. This commit also includes some changes to notifications.py
file so that the spans used for rendering emojis can be converted
to corresponding image tags so that we don't break the emoji rendering
in missed message emails since we can't use sprite sheets there.
As part of switching the bugdown system to use sprite sheets, we need
to switch the name_to_codepoint mappings to match the new sprite
sheets. This has the side effect of fixing a bunch of emoji like
numbers and flag emoji in the emoji pickers.
Fixes: #3895.
Fixes: #3972.
The sidebar selectors may not exist at a particular point on load but
we’d like to realistically cache the results once they are, so we try
to load them live until we know that a valid selector has been found.
This call to update the users scrollbar is inside a huddles update
method which should only affect the group PMs, so we can remove the
update function.
The `exports.build_user_sidebar` method already calls the resize
function, so there’s no need to call it again or wrap it in the
`actually_update_users_for_search` method.
When a `data-sort` is clicked in the body, it will trigger an attempt
to find the closest `list_render` instance, retrieve it from memory,
and then sort by the particular method specified.
This allows for someone to specify a generic sorting function which
accepts a prop to sort by, a sorting function which runs with just a
function on the whole object, and the ability to remove the sorting
function in play.
This adds the perfectScrollbar to the uploads table so that it will
function properly in the settings container since the parent node has a
perfectScrollbar.
This moves the stuff that should not scroll with the table such as the
search box and tips so it is moved out to be above the
`.progressive-table-wrapper` element.
The "View file" option will open the file in a new window if it
is a filetype that can open in the browser and if not, it will just
trigger a download or whatever the browser's settings are.
This adds a max-width constraint to the hero content so that the images
inside the hero don’t keep expanding forever and eventually outside of
the hero’s bounds.
Fixes: #6713.
This adds the perfectScrollbar to the right side and theoretically
updates it any time a piece of code interacts with the sidebar and
updates the counts of users displayed in it.
This shows the download instructions only selectively based on
whether the device has download instructions for it. This means
currently it shows the page for Windows, Mac, and Linux.
The list needs to be set to use perfectScrollbar so that it can
scroll due to the fact that it resides within another instance of
perfectScrollbar.
Fixes: #6351.
The popovers for the message down chevron and left sidebar had
strange side padding and non-uniform padding between the top and
bottom. This changes them to all have the same padding as the
nav `#gear_menu`; none on the sides and 5px on the top and bottom.
This moves the chevron arrow and the "All Streams" text over 10px
so that it will be inline with the hashes below and not be up
against the edge of the screen in some collapsed modes.
The issue before was that the left sidebar would become too tall for
the screen because the standard header that has “STREAMS” and buttons
is 20px tall, and this one is 30px tall. This makes it much shorter,
changes the text to be the same style as the “STREAMS” text (medium
grey, uppercase text).
The markup is then fixed to be significantly less verbose than before —
changing a list to just a simple link.
This combines two different selections of the
`#stream-filters-container` into one chained selection and writes a
comment on how it is possible due to the return value of `.css`.
We were having an anchor tag inside a button which is incorrect HTML.
Chrome and safari handle this case but firefox doesn't and hence the
dropup menu wasn't opening on firefox.
The progressively rendered table extends too far down, causing the page
to scroll needlessly, which then causes there to be two scrollbars — a
scrollbar for the table and a view scrollbar outside that.
Fixes: #6391.
This fixes the issue on subdomain.zulipchat.com/login/ where the
organization name will have characters such as the lowercase "g"
cut off near the bottom due to the line-height being too small and
the overflow being hidden.
This re-arranges the properties to fix that issue.
This adds a centered layout for mobile and responsive screens where the
emoji picker is guaranteed to be in the center of the screen, and the
rest of the screen darkens behind it.
Fixes: #6291.
We want to scroll the left sidebar to the top as soon as the user
zooms in on a stream, and we don't want to wait for the server,
otherwise we'll get jumpiness.
This commit is a bit complicated, because we do full redraws of
the topic list frequently, and we don't want to randomly obliterate
our "No more topics found" message, so we need to keep a bit of
extra state around.
We now use a template to render the "more topics" link.
We also remove an unnecessary conditional and an unnecessary
attribute.
Finally, our unit tests are a bit more granular now.
This will make testing a bit easier (we can stub stuff before
building the widget), and it will eventually give us more control
on redrawing the topic list.
We were parameterizing max_topics, but it made the calling sequences
unnecessarily complicated. We don't ever override the value, not
even in tests, so now we just set in build_list().
This puts build_list on the widget object, which will make it a
bit easier to unit test, and it's more consistent with the rest of
the function. This also reduces the scope of the `my_stream_name`
variable and moves the initialization of `self.topic_items` into
build_list.
If a user re-narrows to another stream before our server gives
us more topic history, or they zoom out, we can avoid drawing
the topic list. Note that our data structures will still be
updated, although the only time that really matters is for
the corner case of a low-traffic stream. For a low traffic
stream that only had 3 or 4 topics in the original message
fetch, but has longer history, the next time you open the
stream in the sidebar, even when you're zoomed out, you will
see more topics.
Despite a few warts, we are going forward with getting topic
history from the server when you click "more topics." This
commit simplifies the code by removing the feature flag
checks.
Our old optimizations to prevent re-rendering of locally echoed
messages created a lot of code complexity. This commit is an
experiment to simplify the code, which it clearly does. The
danger of re-rendering messages is flicker, but our message
view has changed since the original local echo code was written.
It's kind of confusing to have a filter function that has massive
side effects. Now we just have a simple loop where we triage
some messages into non_echo_messages and do an early-exit in the
loop function. This change also introduces the more explicit
variable name of `non_echo_messages`; before we were shadowing
`messages`.
This fixes the characters like “g” and “l” from overflowing the input
bounds while maintaining the previous height of the input box itself.
Fixes: #6665.
This removes the `box-sizing` attribute on the spectrum input that was
causing the characters to overflow the bounds of the padding, which
would cut off things like the bottom of a “g” or the top of an “f”.
Fixes: #6361.
We need a migration to clear the tutorial_status for existing users,
so that we don't show hotspots to anyone who signed up for Zulip in
the month or so since we deleted the old tutorial.
On a standard keyboard, 'q' is to the left of 'w', so it makes sense
for the hotkeys for the left and right sidebars to be `q` and `w`,
respectively, not the other way around.
Previously, if the operand was an invalid email, the site would
throw a scary-looking browser error. Now, it has the same behavior
as other search exeptions, and simply returns no messages found.
This allows user to view all group private conversation messages
with a specific user. That is, it views all the the group private
messages from groups which include the given user.
Add search suggestion for group-pm-with. Add operator name
and description in "Search operators" tab.
Add change in tab name to "Group Messages" when using this operator.
Add frontend_tests for group-pm-with search operator.
Fixes: #3882.
Update variable name in static/js/filter.js from 'message_ids'
to 'user_ids' for better understanding. As it is an array of user
recipients of a particular message.
This commit implements support for copying over static files
for all bots in the zulip_bots package to
static/generated/bots/ during provisioning. This directory
isn't tracked by Git. This allows us to have access to files
stored in an arbitrary zulip_bots package directory somewhere
on the system. For now, logo.* and doc.md files are copied over.
This commit should act as a starting point for extending our
macro-based Markdown framework to our bots/API packages'
documentation and eventually rendering these static files
alongside our webhooks' documentation.
This reverts commit c953759486.
The client side logic for dealing with server counts is actually
fine, as far as we know, but there are still some data-related
issues with cleaning up old unread counts.
The current behavior is that when you subscribe to a new stream
the scroll position moves back up to the top because the list updates,
when in reality the user shouldn't notice this, so we record the
previous scroll position and then apply it once the DOM update is
finished before the next paint cycle.
Fixes: #6606.
The home icon was too far to the right and did not have equal
padding within the <li> tab so this makes the padding an equal
10px on the left and right and none on the top and bottom.
Checking for window.bridge !== undefined is how the old desktop app
had always been tested for in the JS codebase.
Also, "Zulip Desktop" is how this should have been spelled in the first place.
Tweaked by tabbott to provide a proper commit message.
Fixes#6580.
This makes the total left sidebar real estate 40px taller and brings
it flush with the bottom of the screen, giving more room to the
streams list.
Fixes: #6549.
This adds perfectScrollbar to the default streams table
because it currently is inside another perfectScrollbar which
actually makes it impossible to scroll the table normally without
enabling the perfectScrollbar library on this.
Fixes: #6391.
Given a `message_id` and `emoji_name` this function returns the
alias of the emoji user used for reacting to this message, otherwise,
if he has not reacted returns the passed `emoji_name` as it is.
If a reactions picker is open then don't auto-hide the element over
which it is based off. Earlier we were inconsistently auto-hiding
some elements while keeping others visible.
Change the reaction popover to be based off the container elements
for the various message control icons. This will enable us to easily
control the visibility of the base element when the popover is opened
or closed. Also removes redundant `reactions_hover` class.
Bootstrap's `fixTitle()` function removes the base element's original
title attribute. This commit fixes some weird behaviors by restoring
the original title of the element on which the popover is based off.
This displays an error at the top of the screen on page load that
will inform any user with the userAgent string "ZulipDesktop" that
they should upgrade to our newer electron app
Fixes: #6551.
This now shows `blueslip.error` and other JS exceptions in development
in the alert box at the top of the page. Hopefully this will make it
a lot easier to notice newly introduced JS exceptions when working on
Zulip.
Tweaked by tabbott to handle all JS errors, not just blueslip.error.
Fixes: #6155.
This makes the JavaScript tooltips more legible by increasing
the font size and decreasing the line-height, while also increasing
the opacity of the tooltip from 0.8 => 1.
The function is confusing and added unnecessary complexity, given that it is
only called in one place, and is not a function that should be exposed to
other modules.
Steve Howell
Brock Whittaker
Tim Abbott
Umair Khan
brockwhittaker
derAnfaenger
Harshit Bansal
Cynthia Lin
Vishnu Ks
Sarah
Nalin Bhardwaj
Anupam-dagar
Ali Rizwi
YJDave
Shubham Dhama
Rhea Parekh
Alena Volkova
Rishi Gupta
Joshua Pan
Cory Lynch
Abhijeet Kaur
Eeshan Garg
akashnimare