When a server doesn't submit a remote realm info which was
previously submitted, we mark it as locally deleted.
If such a realm has paid plan attached to it, we should investigate.
This commit adds logic to send an email to sales@zulip.com for
investigation.
This commit updates default for delete_own_message_policy
setting to "Everyone" as it is helpful to allow everyone
to delete their own messages in a new organization where
users might be using Zulip for the first time.
This commit updates default for move_messages_between_streams_policy
setting to "Members and above" as it is helpful to allow members
to move messages between streams in new organizations where users
might be using Zulip for first time.
The presence of `len(messages)` outside the transaction caused the
full resultset to be fetched outside of the transaction. This should
ideally be inside the transaction, and also only need be the count.
However, also note that the process of counting matching rows, and
then executing a second query which embeds the same query, is
susceptible to phantom reads, where a query with the same conditions
returns different resultsets, under PostgreSQL's default transaction
isolation of "read committed." While this is possible to resolve by
pulling the returned IDs into a Python list, it would not address the
issue that concurrent updates which change the resultset would make
the overall algorithm still incorrect.
Add a comment clarifying the conditions under which the algorithm is
correct. A more correct algorithm would walk the UserMessage rows
which are unread and in the stream, but this requires a
whole-UserMessage index which would be quite large for such an
infrequent use case.
This makes no immediate reloads the default for runtornado, matching
the production configuration, and changes the development incantation
to be the one to specify the departure from the norm, with
--immediate-reloads.
LoggingCountStats with a daily duration and that are directly stored
on the RealmCount table (not via aggregation in process_count_stat),
can be in a state, after the hourly cron job to update analytics
counts, where the logged value will be live-updated later, because
the end time for the stat is still in the future.
As these logging counts are designed to be used on the self-hosted
installation for either debugging or rate limiting, sending these
partial/incomplete counts to the bouncer has low value.
Due to the channel_map_to_topics URL parameter in the Slack webhook,
it was not migrated to use the check_send_webhook_message.
By using check_send_webhook_message, any topic parameter in the
webhook URL will be prioritized over mapping Slack channels to
topics, e.g. when channel_map_to_topics is true. This is because
the default behaviour for incoming webhooks is to send a default
topic as a parameter to check_send_webhook_message in case there
is no topic specified in the URL.
In contrast, we can override the stream passed in the URL when
channel_map_to_topics is false by passing the Slack channel name
to check_send_webhook_message. The default behaviour for incoming
webhooks is to send a direct message if there is no specified
stream in the URL, so a default stream is not generally passed
to check_send_webhook_message.
Fixes#27601.
This commit adds a realm-level setting named
'zulip_update_announcements_stream' that configures the
stream to which zulip updates should be posted.
Fixes part of #28604.
- Adds instructions for downloading a zuliprc file for a bot or for
yourself.
- Updates the button label to "Download zuliprc", since that's the
filename it downloads.
Fixes#28881.
The previous logic incorrectly used the server-level number of users
even when a (presumably smaller) realm-level count was available.
Fixes a bug introduced in 2e1ed4431a.
This commit renames the realm-level setting
'signup_notifications_stream' to 'signup_announcements_stream'.
The new name reflects better what the setting does.
This commit renames the realm-level setting 'notifications_stream'
to 'new_stream_announcements_stream'.
The new name reflects better what the setting does.
5c96f94206 mistakenly appended, rather than prepended, the edit to
the history. This caused AssertionErrors when attempting to view the
history of moved messages, which check that the `last_edit_time`
matches the timestamp of the first edit in the list.
Fix the ordering, and update the `edit_history` for messages that were
affected. We limit to only messages edited since the commit was
merged, since that helps bound the affected messages somewhat.
RemoteRealm customer takes precedence over RemoteServer
in general. But if an inactive plan is associated with
RemoteRealm and an active plan with RemoteServer, the
ACTIVE plan takes precendence.
Co-authored-by: Prakhar Pratyush <prakhar@zulip.com>
Previously, in DM disabled org messaging to bot was not working when
starting new conversation and adding bot as recipient because of not
updating on recipient change. And secondly, self messaging was not
allowed.
This commit ensures that the DM to bot and self are allowed irrespective
of dm restrictions.
tests: Verify DMs adhere to DM restriction policy.
Fixes#28412
Signed-off-by: sayyedarib <sayyedaribhussain4321@gmail.com>
The widening of the time between when a process is marked for
reload (at Tornado startup) and when it sends reload events makes it
unlikely-to-impossible that a single `/` request will span both of
them, and thus hit the WebReloadClientError corner case.
Remove it, as it is not worth the complication. The bad behaviour it
is attempting to prevent (of a reload right after opening `/`) was
always still possible -- if the `/` request completed right before
Tornado restarted -- so it is not clear that it was ever worth the
complication.
Collapsing was done incorrectly, as 65c400e06d added `zulip_version`
and `zulip_feature_level`, but did not update the virtual event logic
to copy those new values into the virtual event.
However, it is unlikely that a server will be upgraded multiple times
in quick enough succession for this to ever be relevant. Remove the
logic, which is additional complication for little or no gain.
Commit bd6471f0e3 (#28691) added this
reference to the old name, even though it had already been renamed in
commit b220d29fed (#17775), presumably
because that had failed to update the OpenAPI description.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Having a non-identity `cache_transformer` is no different from running
it on every row of the query_function. Simplify understanding of the
codepath used in caching by merging the pieces of code.
Rather than pass around a list of message objects in-memory, we
instead keep the same constructed QuerySet which includes the later
propagated messages (if any), and use that same query to pick out
affected Attachment objects, rather than limiting to the set of ids.
This is not necessarily a win -- the list of message-ids *may* be very
long, and thus the query may be more concise, easier to send to
PostgreSQL, and faster for PostgreSQL to parse. However, the list of
ids is almost certainly better-indexed.
After processing the move, the QuerySet must be re-defined as a search
of ids (and possibly a very long list of such), since there is no
other way which is guaranteed to correctly single out the moved
messages. At this point, it is mostly equivalent to the list of
Message objects, and certainly takes no less memory.
Rather than use `bulk_update()` to batch-move chunks of messages, use
a single SQL query to move the messages. This is much more efficient
for large topic moves. Since the `edit_history` field is not yet
JSON (see #26496) this requires that PostgreSQL cast the current data
into `jsonb`, append the new data (also cast to `jsonb`), and then
re-cast that as text.
For single-message moves, this _increases_ the SQL query count by one,
since we have to re-query for the updated data from the database after
the bulk update. However, this is overall still a performance
improvement, which improves to 2x or 3x for larger topic moves. Below
is a table of duration in seconds to run `do_update_message` to move a
topic to a new stream, based on messages in the topic, for before and
after this change:
| Topic size | Before | After |
| ---------- | -------- | ------- |
| 1 | 0.1036 | 0.0868 |
| 2 | 0.1108 | 0.0925 |
| 5 | 0.1139 | 0.0959 |
| 10 | 0.1218 | 0.0972 |
| 20 | 0.1310 | 0.1098 |
| 50 | 0.1759 | 0.1366 |
| 100 | 0.2307 | 0.1662 |
| 200 | 0.3880 | 0.2229 |
| 500 | 0.7676 | 0.4052 |
| 1000 | 1.3990 | 0.6848 |
| 2000 | 2.9706 | 1.3370 |
| 5000 | 7.5218 | 3.2882 |
| 10000 | 14.0272 | 5.4434 |
This applies access restrictions in SQL, so that individual messages
do not need to be walked one-by-one. It only functions for stream
messages.
Use of this method significantly speeds up checks if we moved "all
visible messages" in a topic, since we no longer need to walk every
remaining message in the old topic to determine that at least one was
visible to the user. Similarly, it significantly speeds up merging
into existing topics, since it no longer must walk every message in
the new topic to determine if the user could see at least one.
Finally, it unlocks the ability to bulk-update only messages the user
has access to, in a single query (see subsequent commit).
This is a preparatory commit that refactors the check_update_message
method to extract the checks containing whether a user can edit the
message or not into a separate method -validate_message_content_edit,
so that it can be re used later.
This logic was apparently missed when we implemented private streams
with shared history; the correct check is to look at whether the user
can access message history in the stream, which used to be equivalent
to whether it's a private stream.
The problem was that earlier this was just an uncaught JsonableError,
leading to a full traceback getting spammed to the admins.
The prior commit introduced a clear .code for this error on the bouncer
side, meaning the self-hosted server can now detect that and handle it
nicely, by just logging.error about it and also take the opportunity to
adjust the realm.push_notifications_... flags.
This commit removes the stale 'email_gateway' parameter
from 'do_send_messages' function.
This should have been removed in 6c473ed75f,
when the call to 'build_message_send_dict' was removed
from 'do_send_messages'.
This error message didn’t make sense for the check as written, and our
OpenAPI document already provides the expected format for our 200
responses.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Real requests would not validate against the previous version. There
seems to be no consistent way to determine whether a string parameter
should be coerced to an integer for validation against an allOf
schema (which works at the level of JSON objects, not strings).
See also https://github.com/python-openapi/openapi-core/issues/698.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The endpoint was lacking validation that the authentication_methods dict
submitted by the user made sense. So e.g. it allowed submitting a
nonsense key like NoSuchBackend or modifying the realm's configured
authentication methods for a backend that's not enabled on the server,
which should not be allowed.
Both were ultimately harmless, because:
1. Submitting NoSuchBackend would luckily just trigger a KeyError inside
the transaction.atomic() block in do_set_realm_authentication_methods
so it would actually roll back the database changes it was trying to
make. So this couldn't actually create some weird
RealmAuthenticationMethod entries.
2. Silently enabling or disabling e.g. GitHub for a realm when GitHub
isn't enabled on the server doesn't really change anything. And this
action is only available to the realm's admins to begin with, so
there's no attack vector here.
test_supported_backends_only_updated wasn't actually testing anything,
because the state it was asserting:
```
self.assertFalse(github_auth_enabled(realm))
self.assertTrue(dev_auth_enabled(realm))
self.assertFalse(password_auth_enabled(realm))
```
matched the desired state submitted to the API...
```
result = self.client_patch(
"/json/realm",
{
"authentication_methods": orjson.dumps(
{"Email": False, "Dev": True, "GitHub": False}
).decode()
},
)
```
so we just replace it with a new test that tests the param validation.
- Renames "Bots and integrations" to "Bots overview" everywhere
(sidebar, page title, page URL).
- Adds a copy of /api/integrations-overview (symbolic link) as the
second page in the Bots & integrations section, titled
"Integrations overview".
Fixes#28758.
We use Alertmanager as an aggregation place for example for failing CI pipelines,
and `graph` does not always reflect the source of the alert. It's called `source` originally
and I think it should stay this way.
Creates an incoming webhook integration for Patreon. The main
use case is getting notifications when new patrons sign up.
Fixes#18321.
Co-authored-by: Hari Prashant Bhimaraju <haripb01@gmail.com>
Co-authored-by: Sudipto Mondal <sudipto.mondal1997@gmail.com>
This commit updates the API to check the permission to subscribe other
users while creating multi-use invites. The API will raise error if
the user passes the "stream_ids" parameter (even when it contains only
default streams) and the calling user does not have permission to
subscribe others to streams.
We did not add this before as we only allowed admins to create
multiuse invites, but now we have added a setting which can be used
to allow users with other roles as well to create multiuse invites.
Extends the description of the authentication_methods realm setting
in the /api/get-events and /api/register-queue endpoints to clarify
the recommended use of the object is for implementing server settings
UI, and to note the data returned by the /api/server-settings
endpoint should be used for implementing authentication UI.
It is possible to have multiple users with the same email address --
for instance, when two users are guests in shared channels via two
different other Slack instances.
Combine those Slack user-ids into one Zulip user, by their user-id;
otherwise, we run into problems during import due to duplicate keys.
1e5c49ad82 added support for shared channels -- but some users may
only currently exist in DMs or MPIMs, and not in channel membership.
Walk the list of MPIM subscriptions and messages, as well as DM users,
and add any such users to the set of mirror dummy users.
This leads to significant speedups. In a test, with 100 random unique
event classes, the old code processed a batch of 100 rows (on average
66-ish unique in the batch) in 0.45 seconds. Doing this in a single
query processes the same batch in 0.0076 seconds.
The previous query suffered from bad corner cases when the user had
received a large number of direct messages but sent very few,
comparatively. This mean that the first half of the UNION would
retrieve a very large number of UserMessage rows, requiring fetching a
large number of Message rows, merely to throw them away upon
determining that the recipient was the current user.
Instead of merging two queries of "last 1k received" + "last 1k sent",
we instead make better use of the UserMessage rows to find "last 1k
sent or received." This may change the list of recipients, as large
disparities in sent/received messages may result in pushing the
most-recently-sent users off of the list. These are likely uncommon
edge cases, however -- and the disparity is the whole reason for the
performance problem.
This also provides more correct answers. In the case where a user's
1001'th message sent was to person A today, but my most recent message
received was from them yesterday, the previous plan would show the
message I received yesterday message-id as the max, and not the more
recent message I sent today.
While we could theoretically raise the `RECENT_CONVERSATIONS_LIMIT` to
more frequently match the same recipient list as previously, this
increases the cost of the most common cases unreasonably. With a
1000-message limit, the common cases are slightly faster, and the tail
latencies are very much improved; raising `RECENT_CONVERSATIONS_LIMIT`
would increase the result similarity to the old algorithm, at the cost
of the p50 and p75.
| | Old | New |
| ------ | ------- | ------- |
| Mean | 0.05287 | 0.02520 |
| p50 | 0.00695 | 0.00556 |
| p75 | 0.05592 | 0.03351 |
| p90 | 0.14645 | 0.08026 |
| p95 | 0.20181 | 0.10906 |
| p99 | 0.30691 | 0.16014 |
| p99.9 | 0.57894 | 0.19521 |
| max | 22.0610 | 0.22184 |
On the whole, however, the much more bounded worst case are worth the
small changes to the resultset.
This is preparatory work towards adding a Topic model.
We plan to use the local variable name as 'topic' for
the Topic model objects.
Currently, we use *topic as the local variable name for
topic names.
We rename local variables of the form *topic to *topic_name
so that we don't need to think about type collisions in
individual code paths where we might want to talk about both
Topic objects and strings for the topic name.
Earlier, after a successful POST request on find accounts page
users were redirected to a URL with the emails (submitted via form)
as URL parameters. Those raw emails in the URL were used to
display on a template.
We no longer redirect to such a URL; instead, we directly render
a template with emails passed as a context variable.
Fixes part of #3128
When you click "Plan management", the desktop app opens
/self-hosted-billing/ in your browser immediately. So that works badly
if you're already logged into another account in the browser, since that
session will be used and it may be for a different user account than in
the desktop app, causing unintended behavior.
The solution is to replace the on click behavior for "Plan management"
in the desktop app case, to instead make a request to a new endpoint
/json/self-hosted-billing, which provides the billing access url in a
json response. The desktop app takes that URL and window.open()s it (in
the browser). And so a remote billing session for the intended user will
be obtained.
As explained in the comment, this is to prevent bugs where some strange
combination of codepaths could end up calling do_login without basic
validation of e.g. the subdomain. The usefulness of this will be
extended with the upcoming commit to add the ability to configure custom
code to wrap authenticate() calls in. This will help ensure that some
codepaths don't slip by the mechanism, ending up logging in a user
without the chance for the custom wrapper to run its code.
This test is ancient and patches so much that it's almost unreadable,
while being redundant considering we have comprehensive tests via the
SocialAuthBase subclasses. The one missing case was the one with the
backend we disabled. We replace that with a proper
test_social_auth_backend_disabled test in SocialAuthBase.
This is preparatory work towards adding a Topic model.
We plan to use the local variable name as 'topic' for
the Topic model objects.
Currently, we use *topic as the local variable name for
topic names.
We rename local variables of the form *topic to *topic_name
so that we don't need to think about type collisions in
individual code paths where we might want to talk about both
Topic objects and strings for the topic name.
This is preparatory work towards adding a Topic model.
We plan to use the local variable name as 'topic' for
the Topic model objects.
Currently, we use *topic as the local variable name for
topic names.
We rename local variables of the form *topic to *topic_name
so that we don't need to think about type collisions in
individual code paths where we might want to talk about both
Topic objects and strings for the topic name.
This is preparatory work towards adding a Topic model.
We plan to use the local variable name as 'topic' for
the Topic model objects.
Currently, we use *topic as the local variable name for
topic names.
We rename local variables of the form *topic to *topic_name
so that we don't need to think about type collisions in
individual code paths where we might want to talk about both
Topic objects and strings for the topic name.
This is preparatory work towards adding a Topic model.
We plan to use the local variable name as 'topic' for
the Topic model objects.
Currently, we use *topic as the local variable name for
topic names.
We rename local variables of the form *topic to *topic_name
so that we don't need to think about type collisions in
individual code paths where we might want to talk about both
Topic objects and strings for the topic name.
Rename and restructure these comparison variables such that we don't
have a possibly impossible case for presence.last_connected_time being
None.
Fixes#25498.
We previously created the connection to the outgoing email server when
the EmailSendingWorker was first created. Since creating the
connection can fail (e.g. because of firewalls or typos in the
hostname), this can cause the `QueueProcessingWorker` creation to
raise an exception. In multi-threaded mode, exceptions in the worker
threads which are _not_ during the handling of a specific event
percolate out to `log_and_exit_if_exception` and trigger the
termination of the entire process -- stopping all worker threads from
making forward progress.
Contain the blast radius of misconfigured email servers by deferring
the opening of the connection until it is first needed. This will not
cause any overall performance change, since it only affects the
latency of the very first email after startup.
Creating the QueueProcessingWorker objects when the ThreadedWorker is
created can lead to a race which caused confusing error messages:
1. A thread tries to call `self.worker = get_worker()`
2. This call raises an exception, which is caught by
`log_and_exit_if_exception`
3. `log_and_exit_if_exception` sends our process a SIGUSR1, _but
otherwise swallows the error_.
4. The thread's `.run()` is called, which tries to access
`self.worker`, which was never set, and throws another exception.
5. The process handles the SIGUSR1, restarting.
Move the creation of the worker to when it is started, so the worker
object does not need to be stored, and possibly have a decoupled
failure.
Switches from Django's default error page to Zulip standard error
template. Also updates template for 405 error code to not use the 404
art.
Fixes#25626.
By default, `SELECT FOR UPDATE` will also lock any rows which are
`JOIN`ed into the selected rows; in the case of UserMessage rows, this
can mean arbitrary Message rows.
Since the messages themselves are not being changed, it is not
necessary to lock them -- and doing so may lead to deadlocks, in the
case that the UserMessage row is locked for update before the Message,
and some other request has already taken a read lock on the Message
and is blocked on the UserMessage write lock.
Change `select_for_update_query` to explicitly only lock UserMessage.
Updates title and main description to follow the general style
of the API endpoint documentation.
Updates `token` description to clarify suggested mobile client
behavior.
Adds a set of excluded endpoints for the test of generated curl
examples in the API documentation.
Currently, only the `api/test-notify` endpoint is excluded since
there would need to be a push notification bouncer set up to test
that generated curl example.
We return expected_end_timestamp as "None" for the plans to be
downgraded if number of users is not more than MAX_USERS_WITHOUT_PLAN
since they will be downgraded to self-managed plan and would
have push notifications enabled.
Requests to these endpoint are about a specified user, and therefore
also have a notion of the RemoteRealm for these requests. Until now
these endpoints weren't getting the realm_uuid value, because it wasn't
used - but now it is needed for updating .last_request_datetime on the
RemoteRealm.
For the RemoteRealm case, we can only set this in endpoints where the
remote server sends us the realm_uuid. So we're missing that for the
endpoints:
- remotes/push/unregister and remotes/push/unregister/all
- remotes/push/test_notification
This should be added in a follow-up commit.
os.path.getmtime needs to be mock.patched or otherwise the success of
the test depends on the filesystem state and breaks if version.py hasn't
been modified in a while.
`<time:1234567890123>` causes a "signed integer is greater than
maximum" exception from dateutil.parser; datetime also cannot handle
it ("year 41091 is out of range") but that is a ValueError which is
already caught.
Catch the OverflowError thrown by dateutil.
boto3 has two different modalities of making API calls -- through
resources, and through clients. Resources are a higher-level
abstraction, and thus more generally useful, but some APIs are only
accessible through clients. It is possible to get to a client object
from a resource, but not vice versa.
Use `get_bucket(...).meta.client` when we need direct access to the
client object for more complex API calls; this lets all of the
configuration for how to access S3 to sit within `get_bucket`. Client
objects are not bound to only one bucket, but we get to them based on
the bucket we will be interacting with, for clarity.
We removed the cached session object, as it serves no real purpose.
e883ab057f started caching the boto client, which we had identified
as slow call. e883ab057f went further, calling
`get_boto_client().generate_presigned_url()` once and caching that
result.
This makes the inner cache on the client useless. Remove it.
Adds a support action for updating the minimum licenses on a
customer object once a default discount has also been set.
In the case that the current billing entity has a current active
plan or a scheduled upgrade to a new plan, then the minimum
licenses will not be updated.
This protects us from incorrectly handling situations where someone
tested and upgrade to 8.0 for a backup on a separate hostname, and
left the test system live while upgrading the main system, in a way
that results in duplicate RemoteRealm objects that are all marked as
locally deleted.
Further word is required to figure out how to avoid the original
duplication problem.
If we `.distinct("delivery_email")` then we must also
`.order_by("delivery_email")`; adc987dc43 added the `.order_by`
call, which broke the newsletter codepath, since it did not contain
the `delivery_email` in the ordering fields.
Add a flag to distinct on emails in `send_custom_email`.
The set of `enable_marketing_emails=True` are those that have opted
into getting marketing newsletter emails -- but we previously limited
further to only those users active in the last month.
Broaden that to "opted in, and either recently active or an owner or
an admin," with the goal of providing information to folks who may
have tried out Zulip in the past.
Co-authored-by: Tim Abbott <tabbott@zulip.com>
Earlier, 'topic' parameter length for
'/users/me/subscriptions/muted_topics' and '/user_topics' endpoints
were not validated before DB operations which resulted in exception:
'DataError: value too long for type character varying(60)'.
This commit adds validation for the topic name length to be
capped at 'max_topic_length' characters.
The doc is updated to suggest clients that the topic name should
have a maximum length of 'max_topic_length'.
Fixes#27796.
Old RemotePushDeviceTokens were created without this attribute. But when
processing a notification, if we have remote_realm, we can take the
opportunity to to set this for all the registrations for this user.
This moves the function which computes can_push and
expected_end_timestamp outside RemoteRealmBillingSession
because we might use this function for RemoteZulipServer
as well and also renames it.
For remote servers, we cannot advertise `List-Unsubscribe=One-Click`,
which is specified in RFC 8058[^1] to mean that the `List-Unsubscribe`
URL supports a POST request with no arguments to unsubscribe. Because
we show an interstitial and confirmation page, as this is not just a
mailing list which is disabled if you click the link, it does not
support the mail system performing the unsubscribe for the user.
Remove the inaccurate header for remote servers.
[^1]: https://datatracker.ietf.org/doc/html/rfc8058
612f2c73d6 started passing add_context to
`send_custom_server_email`, but did not make it make use of it.
Also add the `hostname` as a built-in value, since that is most likely
the most useful property.
This fixes the exception case on the initial
`/api/v1/remotes/server/analytics/status` case. Other exceptions from
`send_to_push_bouncer` are allowed to escape.
Co-authored-by: Alex Vandiver <alexmv@zulip.com>
Previously, passing a url longer than 200 characters for
jitsi_server_url caused a low-level failure at DB level. This
commit adds this restriction at API level.
Fixes part of #27355.
While the query parameter is properly excaped when inlined into the
template (and thus is not an XSS), it can still produce content which
misleads the user via carefully-crafted query parameter.
Validate that the parameter looks like an email address.
Thanks to jinjo2 for reporting this, via HackerOne.
We previously used get_accessible_user_ids to check whether the
sender can access all DM recipients, which was not efficient as
it queries the Message table. This commit updates the code to
make sure we use get_inaccessible_user_ids which is much more
efficient as it limits the queries to only DM recipients and
also queries the Message table only if needed.
This can still be optimized further as mentioned in #27835 but
this commit is a nice first step.
Saying `**options: str` is a lie, since it contains bools. We pluck
out the two bools that we need properly typed because we will be
pushing them into function calls, and type them explicitly as bools.
As premonitioned in c741c527d7, it is
indeed possible for `get_handler_by_id` to error out by cause the
handler has been unset elsewhere.
Protect the callsites of `get_handler_by_id` to be able to gracefully
handle when the handler has already done away.
This fixes a bug introduced in
6f93ab72c0 where deactivating a realm
would fail with an exception that sessions cannot be cleared inside
database transactions.
If the exception was because the channel closed, attempting to NAK the
events will just raise another error, and is pointless, as the server
already marked the pending events as NAK'd.
4af00f61a8 claimed that `on_finish` and
`on_connection_close` were mutually exclusive. In cases where a
`DELETE` is called on the queue while a longpoll is in progress, this
can cause _both_ to happen:
- The `DELETE` pushes a `cleanup_queue` event, which triggers
`finish_handler` to begin pushing out an empty event response to the
longpoll connection.
- In the midst of that, in an `await`, the longpoll connection drops,
and `on_connection_close` clears the handler.
- The `await` resumes, calls `finish`, and attempts to clear the
handler.
The easiest solution is to make `clear_handler_by_id` tolerant to
multiple attempts to clear it. Since these processes run in parallel,
it means that parts may have a `handler_id` but `get_handler_by_id`
may error in attempting to look it up. We have not observed this in
testing, and I cannot currently prove it is impossible.
This ensures determinism in these tests doing mock_send.assert_called
with - avoids producing test flakes due to a different order of
retrieval of these objects from the database.
- The server sends the list of registrations it believes to have with
the bouncer.
- The bouncer includes in the response the registrations that it doesn't
actually have and therefore the server should delete.
This commit creates a RealmAuditlog entry with a new event_type
'RealmAuditLog.REALM_IMPORTED' after the realm is reactivated.
It contains user count data (using realm_user_count_by_role)
stored in extra_data.
This helps to have an accurate user count data for the billing
system if someone tries to signup just after doing an import.
This partially reverts 579bdc18f85ea8599c8cf1f53ddb02fd41d97993; it
assumed (based on its documentation) that `on_finish` was called for
all requests, even client-terminated ones. This is not accurate; it
is only called when the request calls `finish`, which only happens for
successful requests. This caused every client-closed connection to
leak a handler (ironically, exactly re-introducing the bug previously
fixed in 12a5a3a6e1).
This behaviour was obscured by the development environment's proxy;
see comment added in the previous commit.
Instead of replacing the `clear_handler_by_id` call into
`ClientDescriptor.disconnect_handler`, we instead place it on
`AsyncDjangoHandler.on_connection_close`. This is more correct for
a few reasons:
- `on_connection_close` will be called if the client goes away during
a request without a client descriptor. If the handler garbage
collection of handlers runs inside the ClientDescriptor, we leak
handlers.
- `disconnect_handler` also runs when successfully sending an event,
which already calls `on_finish`. We avoid double-calling
`clear_handler_by_id` by doing it in two clearly exclusive cases,
`on_finish` and `on_connection_close`.
- It combines the creation and garbage collection logic into one
file, decreasing action at a distance which causes memory leaks.
We call 'send_server_data_to_push_bouncer' just after registering
server for push notification.
This helps to have a current state of the user counts when first
logging in after the RemoteRealm flow.
Actions that change the number of user counts adds a deferred_work
queue processor job immediately update the billing service about your
change.
This helps to avoid having users see stale state for how many
users they have when trying to pay.
This is a rename of the previous
enqueue_register_realm_with_push_bouncer_if_needed but is clearer
about the fact that this will also upload audit logs if available.
Given that most of the use cases for realms-only code path would
really like to upload audit logs too, and the others would likely
produce a better user experience if they upoaded audit logs, we
should just have a single main code path here i.e.
'send_analytics_to_push_bouncer'.
We still only upload usage statistics according to documented
option, and only from the analytics cron job.
The error handling takes place in 'send_analytics_to_push_bouncer'
itself.
This is the only operating editing audit logs not already using a
transaction, and having it do so will simplify an upcoming interface
to be able to assume it is always inside a transaction.
Earlier, it was passing tests because the deffered_work queue
that calls send_realms_only_to_push_bouncer didn't update the
realms propery based on response received from bouncer.
This prep commit removes the invalid "dummy-uuid" used, as any
call to send_realms_only_to_push_bouncer will update realms
properties too.
We return an empty realms array as the realm is created midway in
do_create_realm, so the uuid is not already available. Also, our
intent here is not to verify the behaviour of the
send_realms_only_to_push_bouncer function because we'll have
separate tests for that. Here, we verify that deffered_work event
was sent and eventually it made call to send_to_push_bouncer
with appropriate data.
I accidentally free trials for both cloud and self hosted
enabled while testing, hence didn't catch it.
This mostly involves fixing `is_free_trial_offer_enabled` to
return the correct value and providing it the correct input.
When a self-hosted Zulip server does a data export and then import
process into a different hosting environment (i.e. not sharing the
RemoteZulipServer with the original, we'll have various things that
fail where we look up the RemoteRealm by UUID and find it but the
RemoteZulipServer it is associated with is the wrong one.
Right now, we ask user to contact support via an error page but
might develop UI to help user do the migration directly.
This commit adds code to not include original details of senders like
name, email and avatar url in the message objects sent through events
and in the response of endpoint used to fetch messages.
This is the last major commit for the project to add support for
limiting guest access to an entire organization.
Fixes#10970.
initialize() is called on every request, and stored the
`RequestHandler` (and thus `HTTPServerRequest`) in a global shared
dict. However, the object is only removed from that structure if the
request was successful. This means that failed requests (such as 405
Method Not Allowed) leaked `RequestHandler`s and
`HTTPServerRequest`s.
Move the cleanup to `on_finish`, which is called at the close of all
requests, async and not, successful or not.
These are not part of the API, and lead to moderately confusing
behaviour -- they block (or not) requested, but of course send no
actual data in the body.
This commit sets the client capability value to not pass
unknown users data in the webapp and also does some changes
to avoid errors while loading the web-app home page.
This commit only does some basic webapp changes to not show
inaccessible users in sidebar and we would need need more
changes to make the web-app work as expected which will be
done in further commits.
Adds `user.realm.string_id` as the realm name to the base payload
for notifications. Uses this realm name in the body of the alert
in the `apns_data`.
Changes the event string from "test-by-device-token" to "test".
Fixes#28075.
Earlier, the event sent when an onboarding step (hotspot till now)
is marked as read generated an event with type='hotspots' and
'hotspots' named array in it.
This commit renames the type to 'onboarding_steps' and the array
to 'onboarding_steps' to reflect the fact that it'll also contain
data for elements other than hotspots.
This commit adds a 'type' field to the objects
in 'hotspots' array sent in 'hotspots' events.
We have explicitly added this field as we eventually
plan to have two type of onboarding steps, 'hotspots'
and 'one_time_notice'.
This will help clients to easily identify them.
This commit adds a new endpoint 'users/me/onboarding_steps'
deprecating the older 'users/me/hotspots' to mark hotspot as read.
We also renamed the view `mark_hotspot_as_read` to
`mark_onboarding_step_as_read`.
Reason: Our plan is to make this endpoint flexible to support
other types of UI elements not just restricted to hotspots.
This prep commit moves the 'rename_indexes_constraints'
function to 'lib/migrate' as we're going to re-use it for
the 'UserHotspot' to 'OnboardingStep' table rename operation.
In general, this function would be helpful in migrations
involving table rename operations, subject to the caution
mentioned in the function via comments.
Adds a helper since there are only a few different parameters for
all BillingSession child clases, `build_support_url`.
Also, renames `get_support_url` to more explicitly note that it
is for realms: `get_realm_support_url`.
This commit adds code to include original name, email and avatar
for inaccessible users which can happen when a user sends message
to an unsubscribed stream.
This commit adds code to not allow Zulip Cloud organizations that are not
on the Plus plan to change the "can_access_all_users_group" setting.
Fixes#27877.
We rename "intro_gear" to "intro_personal" because after the menu
was split into help menu, main menu and personal menu, the "Settings"
option now resides inside the personal menu.
Fixes#27878.
1. When we get data and it includes realm info, we should automatically
link the new records with the appropriate RemoteRealm.
2. For old records, when we receive realm data, we have an opportunity
to update those old record to link them to the right RemoteRealm.
This logic doesn't need to always run, just after a remote server
upgrade, since that's when this shift in remote server behavior will
occur.
This commit moves the 'update_license_ledger_if_needed' and its
helper function 'update_license_ledger_for_automanaged_plan'
to the 'BillingSession' abstract class.
This refactoring will help in minimizing duplicate code while
supporting both realm and remote_server customers.
This creates a valid registration, for two reasons:
1. Avoid the need to run "manage.py register_server" in dev env to
register, when wanting to to test stuff with
`PUSH_NOTIFICATION_BOUNCER_URL = "http://localhost:9991"`.
2. Avoid breaking RemoteRealm syncing, due to duplicate registrations
(first set of registrations that gets set up with the dummy
RemoteZulipServer in populate_db, and the second that gets set up via
the regular syncing mechanism with the new RemoteZulipServer created
during register_server).
This is a prep commit to return, for each remote realm, the 'uuid',
'can_push', and 'expected_end_timestamp'.
This data will be used in 'initialize_push_notifications'.
The "send_invoice" and "charge_automatically" strings used by stripe
for the `collection_method` are referred to both as the "billing
method" and "billing modality" in the billing code.
Because we send this as data to stripe as either `collection_method`
or `billing_modality`, renames any references that are any form of
"billing method".
Implements a nice redirect flow to give a good UX for users attempting
to access a remote billing page with an expired RemoteRealm session e.g.
/realm/some-uuid/sponsorship - perhaps through their browser
history or just their session expired while they were doing things in
this billing system.
The logic has a few pieces:
1. get_remote_realm_from_session, if the user doesn't have a
identity_dict will raise RemoteBillingAuthenticationError.
2. If the user has an identity_dict, but it's expired, then
get_identity_dict_from_session inside of get_remote_realm_from_session
will raise RemoteBillingIdentityExpiredError.
3. The decorator authenticated_remote_realm_management_endpoint
catches that exception and uses some general logic, described in more
detail in the comments in the code, to figure out the right URL to
redirect them to. Something like:
https://theirserver.example.com/self-hosted-billing/?next_page=...
where the next_page param is determined based on parsing request.path
to see what kind of endpoint they're trying to access.
4. The remote_server_billing_entry endpoint is tweaked to also send
its uri scheme to the bouncer, so that the bouncer can know whether
to do the redirect on http or https.
This consists of the following pieces:
1. Makes servers using the bouncer send realm_uuid in requests for token
registration. (Sidenote: realm_uuid is already sent in the "send
notification" codepath as of
48db4bf854)
2. This allows the bouncer to tie RemotePushDeviceToken to the
RemoteRealm with matching realm_uuid at registration time.
3. Introduce handling of some potential weird edge cases around the
realm_uuid and RemoteRealm objects in get_remote_realm_helper.
This default setup will be more realistic, matching the ordinary
conditions for a modern server.
Especially needed as we add bouncer code that will expect to have
RemoteRealm entries for realm_uuid values for which it receives
requests.
[squash]: Update sponsorsip and question boxes for Cloud.
[squash]: Update tabs subtitles.
[squash]: Content for info boxes for self-hosted plans.
[squash]: Adjust content to fit design.
portico: Tweak /plans text.
We want to both (a) take a lock on the UserProfile row, and (b)
modify the passed-in UserProfile object, so that callers see the
changes in the object they hold. Unfortunately,
`select_for_update` cannot be combined with `refresh_from_db`
(https://code.djangoproject.com/ticket/28344). Call
`select_for_update` and throw away the result, so that we know we have
the lock on the row, then re-fill the `user_profile` object with the
values now that the lock exists.
This reduces the query time by an order of magnitude, since it is able
to switch from a raw `stream_id` index to an index over all of
`realm_id, property, end_time`.
We pass `next` parameter with /self-hosted-billing to redirect
users to the intended page after login.
Fixed realm_uuid incorrectly required in remote_realm_upgrade_page.
These metadata are essentially all publicily available anyway, and
making uploading them unconditional will simplify some things.
The documentation is not quite accurate in that it claims the server
will upload some metadata that is not actually uploaded yet (but will
by soon). This seems harmless.
Currently, the sender names for outgoing emails sent by Zulip
are hardcoded. It should be configurable for self-hosted systems.
This commit makes the 'Zulip' part a variable in the following
email sender names: 'Zulip Account Security', 'Zulip Digest',
and 'Zulip Notifications' by introducing a settings variable
'SERVICE_NAME' with the default value as f"{EXTERNAL_HOST} Zulip".
Fixes: #23857
This prep commit replaces `_` with `ignored` to represent
an unused variable.
In later commits, we are going to use `_` for translation,
which leads to a lint error.
This commit updates get_fake_email_domain to accept realm.host as
argument instead of the Realm object since we only use realm.host
to get the fake email domain.
This is a preparatory commit for the limited guest feature as we
would be sending the fake email of the message sender in message
event object to a guest user who cannot access the sender and
there we would need to compute the fake email.
549dd8a4c4 changed the regex that we build to contain whitespace for
readability, and strip that back out before returning it.
Unfortunately, this also serves to strip out whitespace in the source
linkifier, causing it to not match expected strings.
Revert 549dd8a4c4.
Fixes: #27854.
Adds details about the requested organization URL and type to the
registration confirmation email that's sent when creating a new
Zulip organization.
Fixes#25899.
If the request's `Accept:` header signals a preference for serving
images over text, return an image representing the 404/403 instead of
serving a `text/html` response.
Fixes: #23739.
Previously, we weren't able to mute the cross realm bots. This was
because, for muting the users, we access only those profiles which are
in realm, excluding the cross realm system bots.
This is fixed by replacing the access_user_by_id method with a new
method access_user_by_id_including_cross_realm for this specific test.
Fixes#27823
Earlier, for the push notifications having latex math
like "$$1 \oplus 0 = 1$$, the notification had the math
included multiple times.
This commit fixes the incorrect behavior by replacing
the KaTeX with the raw LaTeX source.
Fixes part of #25289.
This commit refactors the current hotspot subsytem to use a more
robust dataclass `Hotspot` defined in `lib/hotspots.py`. This fixes
mypy errors as well as make code more readable.
This commit introduces non-intro hotspots.
They are a bit different than intro hotspots in the
following ways:
* All the non-intro hotspots are sent at once instead of
sending them one by one like intro hotspots.
* They only activate when a specific event occurs,
unlike intro hotspot where they activate after the
previous hotspot is read.
Now, the topic wildcard mention follows the following
rules:
* If the topic has less than 15 participants , anyone
can use @ topic mentions.
* For more than 15, the org setting 'wildcard_mention_policy'
determines who can use @ topic mentions.
Earlier, topic wildcard mentions followed the same restriction
as stream wildcard mentions, which was incorrect.
Fixes part of #27700.
This commit updates the backend code to allow changing
can_access_all_users_group setting in development environment
and also adds a dropdown in webapp UI which is only shown in
development environment.
This commit moves a major portion of the 'update_plan`
view to a new shared 'BillingSession.do_update_plan' method.
This refactoring will help in minimizing duplicate code
while supporting both realm and remote_server customers.
This makes it possible for a self-hosted realm administrator to
directly access a logged-page on the push notifications bouncer
service, enabling billing, support contacts, and other administrator
for enterprise customers to be managed without manual setup.
has_billing_access already has the is_realm_owner check:
@property
def has_billing_access(self) -> bool:
return self.is_realm_owner or self.is_billing_admin
We previously did not allow setting signup_notifications_stream and
notifications_stream settings to private streams that admin is not
subscribed to, even when admins have access to metadata of all the
streams in the realm and can see them in the dropdown options as well.
This commit fixes it to allow admins to set these settings to private
streams that the admin is not subscribed to.
Previously, the notifications had "commented" as the action word
for every event.
As part of these changes, we extract a shared comment action function
in GitHub Integration that's used for both issue and discussion
comment events.
Instead of adding the assignee to the end of the message body,
we update the message body where the verb is so that the link
formatting at the end of the message is not broken, for example:
"user_a assigned user_b to [issue #XXX title text is here](link)."
This matches the formatting for the issue assigned message body.
Instead of adding the assignee to the end of the message body,
we update the message body where the verb is so that the link
formatting at the end of the message is not broken, for example:
"user_a assigned user_b to [issue #XXX title text is here](link)."
Also updates the issue title in the test fixture so that it tests
that only the first instance of "assigned" or "unassigned" in the
issue title is updated for the assignee text.
Also adds punctuation to the issue title in the test fixture to
test the expected behavior for titles that end in a value from
`string.punctuation`.
We did not remove the objects for deactivated streams from
subscriptions field in apply_event. We need to do this because
we do not send "subscription/remove" events to subscribers
when deactivating streams.
Guests might lose access to deactivated users if the user
is not involved in any DM with guest. This commit adds
code to send "realm_user/remove" events for such cases.
We now send user creation events to recipient users
when sending DMs if recipients gain access to either
sender or other pariticpating users in the DM.
This commit adds code to send "realm_user/remove" event
when a guest user loses access to a user due to the user
being unsubscribed from one or more streams.
This commit adds code to send user creation events to
guests who gain access to new subscribers and to the
new guest subscribers who gain access to existing
stream subscribers.
The presence and user status update events are only sent to accessible
users, i.e. guests do not receive presence and user status updates for
users they cannot access.
This commit adds code to make sure that update events for changing
a user's role, email, etc. are not sent to guests who cannot access
the modified user.
We do not send the original user data in user creation events
to guests if user access is restricted in realm, as they would
receive the information about user if user is subscribed to some
common streams after account creation.
This commit adds code to update access_user_by_id to raise
error if guest tries to access an inaccessible user.
One notable behavioral change due to this is that we do
not allow guest to mute or unmute a deactivated user if
that user was not involved in DMs.
Pull request comment alerts were previously sent to a topic for an issue,
which resulted in two different topics for the same PR.
Fixes: #26086.
Co-authored-by: Lauryn Menard <lauryn@zulip.com>
Updated the repo name and pull request number/title for the new
pull request commit fixture to be the same as the one used for the
other pull request test fixtures (e.g. pull_request__opened) so
that the TOPIC_PR can be used in the subsequent updates.
Co-authored-by: Lauryn Menard <lauryn@zulip.com>
This may happen if there are multiple servers with the same UUID
submitting data (e.g. if they were cloned after initial creation), or
if there is one server, but `./manage.py clear_analytics_tables` was
used to truncate the analytics tables.
In the case of `clear_analytics_tables`, the data submitted likely has
identical historical values with new remote `id` values; preserving
the originally-submitted contemporaneous data is the best option. For
the case of submissions from multiple servers, there is no completely
sensible outcome, so the best we can do is detect the case and move
on.
Since we have a lock on the RemoteZulipServer, we know that no other
inserts are happening, so counting before and after will return the
true number of rows inserted (which `bulk_create` cannot do in the
face of `ignore_conflicts`[^1]). We compare this to the expected
number of new inserted rows to detect dropped duplicates.
[^1]: See https://code.djangoproject.com/ticket/30138.
This reduces the giant load spike at 5 minute past the hour, when all
remote servers currently attempt to submit their records.
We do not wish to slew over a full hour, because we want to ensure
that we do not hold the lock when the next hour's analytics runs. It
is also not necessary to have that much variation; 10 minutes is
picked as an arbitrary "long enough" time to spread requests over.
Earlier, for the emails having latex math like
"$$d^* = +\infty$$", the bad rendering led to the math
being included multiple times in the email body.
This was due to displaying KaTeX HTML without the CSS.
This commit fixes the incorrect behavior by replacing
the KaTeX with the raw LaTex source.
Fixes part of #25289.
This is a useful helper using the same API as
send_analytics_to_push_bouncer(), but uploading only realms info. This
is useful to upload realms info without the risk of taking a long time
to process the request due to too much of the *Count analytics data.
The original behavior of this setting was to disable LDAP
authentication for any realms not configured to use it. This was an
arbitrary choice, and its only value was to potentially help catch
typos for users who are lazy about testing their configuration.
Since it makes it a very inconvenient to potentially host multiple
organizations with different LDAP configurations, remove that
behavior.
This commit adds a new option 'DMs, mentions, and followed topics'
to 'desktop_icon_count_display' setting.
The total unread count of DMs, mentions, and followed topics appears
in desktop sidebar and browser tab when this option is configured.
Some existing options are relabeled and renumbered. We finally have:
* All unread messages
* DMs, mentions, and followed topics
* DMs and mentions
* None
Fixes#27503.
While the server implementation has accepted this value for a few
months as part of building the feature, following topics was not a
fully supported feature of the Zulip server before
3f2ab44f94, just before feature
level 219.
So that's probably the correct level to document as the first feature
level at which we recommend that clients supporting the followed
topics feature process the value.
These new models are incomplete and totally untested, but merging this
will provide valuable scaffolding for doing smaller PRs working on
individual gaps, and reveals a clear set of TODOs/refactoring/model
changes needed to support where want to end up.
Co-authored-by: Tim Abbott <tabbott@zulip.com>
These were written before the draft endpoints were converted to use
@typed_endpoint and pydantic-based DraftData(BaseModel) for param
validation. Update them to avoid the confusion of talking about dicts
and dict_validator functions when those are no longer a thing.
This reverts commit 091e2f177b.
This version of python_to_js_linkifier fails for at least some real
linkifiers. We'll likely re-introduce this after a bit more debugging.
This makes it possible to send notifications to more than one app ID
from the same server: for example, the main Zulip mobile app and the
new Flutter-based app, which has a separate app ID for use through its
beta period so that it can be installed alongside the existing app.
This commit adds code to send stream deletion events when
unsubscribing non-admin users from private streams and
when unsubscribing guests from public streams since
non-admins cannot access unsubscribed private streams
and guests cannot access unsubscribed public streams.
It was discovered by the Zulip development team that active users who
had previously been subscribed to a stream incorrectly continued being
able to use the Zulip API to access metadata for that stream. As a
result, users who had been removed from a stream, but still had an
account in the organization, could still view metadata for that
stream (including the stream name, description, settings, and an email
address used to send emails into the stream via the incoming email
integration). This potentially allowed users to see changes to a
stream’s metadata after they had lost access to the stream.
This bug was present in all Zulip releases prior to today's Zulip
Server 7.5.
This commit adds new API endpoint to get stream email which is
used by the web-app as well to get the email when a user tries
to open the stream email modal.
The stream email is returned only to the users who have access
to it. Specifically for private streams only subscribed users
have access to its email. And for public streams, all non-guest
users and only subscribed guests have access to its email.
All users can access email of web-public streams.
This commit removes "email_address" field from Subscription objects
and we would instead a new endpoint in next commit to get email
address for stream with proper access check.
This change also fixes the bug where we would include email address
for the unsubscribed private stream as well when user did not have
permission to send message to the stream, and having email allowed
the unsubscribed user to send message to the stream.
Note that the unsubscribed user can still send message to the stream
if the user had noted down the email before being unsubscribed
and the stream token is not changed after unsubscribing the user.
Since the server-side implementation no longer uses look-ahead
or (more importantly) look-behind, it is possible to exactly implement
in Javascript. This removes a common class which would prevent local
echo.
This requires reworking the topic linking algorithm, to march the
server's as well. The tests and behaviour are adjusted in so doing --
previously, the JS implementation would have linked `#foo` with a
`foo` regex on the linkifier, but the server implementation would not
have.
This commit adds code to unset is_web_public and is_realm_public fields
on attachments when deactivating a stream as we do not want to allow
spectators to access them after the stream is deactivated.
This commit also adds a comment explaining why we don't use
do_change_stream_permission to set the privacy fields on deactivating
a stream.
Fixes#27634.
We did not unset is_realm_public field on attachements when unarchiving
streams, but we do unset is_web_public field. This commit adds code to
unset the is_realm_public field as well as we make the stream private
while unarchiving it.
This cache was only used in one place, which is infrequently
called (only when sending messages, or searching explicitly for a list
of users) and the overhead of maintaining the cache is not worth
trying to avoid the well-indexed lookup of the huddle.
We now pass bogus data for inaccessible users when sending
the users data in "realm_users" field of "register" response
or when using endpoints like "GET /users" to get data of
all the users in realm.
We would add a client capability field in future commits
such that new clients would receive data only for accessible
users and they can form the bogus data by themselves.
This commit adds new setting for controlling who can access
all users in the realm which would have "Everyone" and
"Members only" option.
Fixes part of #10970.
This is a CountStat for tracking how many mobile notifications the
server requested.
1. On a self-hosted server, that means requesting from the push bouncer.
2. On a server that's its own push bouncer, that's just the number
directly sent.
This number has room for inaccuracy due to incrementing by the number of
user devices on a self-hosted server, as it doesn't account for errors
that may occur in the GCM/APNs low-level sending codepaths on the bouncer.
Also tests that a server that's its own push bouncer correctly
increments its mobile_pushes_sent::day CountStat, by basing it on the
values returned from the send_apple/android_push_notification functions
which tell us the actual number of successfully sent notifications.
Since the return values of send_..._push_notification are now
used in those codepaths, we need to tweak our mocks in some unrelated
tests to set up some return value to avoid errors.
Rename the existing 'wildcard_mentioned' flag to
'stream_wildcard_mentioned'.
The 'wildcard_mentioned' flag is deprecated and exists for
backwards compatibility.
We have two separate flags for stream and topic wildcard mentions,
i.e., 'stream_wildcard_mentioned' and 'topic_wildcard_mentioned',
respectively.
* stream wildcard mentions: `@all`, `@everyone`, and `@stream`
* topic wildcard mentions: `@topic`
The `wildcard_mentioned` flag is included in the events and
API response if either `stream_wildcard_mentioned` or
`topic_wildcard_mentioned` is set.
In c37871ac3a, we renamed the
two unused and historical bits of the 'flags' bitfield of
the 'UserMessage' table:
* 'summarize_in_home' to 'topic_wildcard_mentioned'
* 'summarize_in_stream' to 'group_mentioned'
This commit clears out the old data for those bits.
Additionally, we are clearing 'force_expand' and 'force_collapse'
unused flags to save future work.
Add the new model for recording basic information about Realms on remote
server, to go with the other analytics data. Also adds necessary changes
to the bouncer endpoint and the send_analytics_to_push_bouncer()
function to submit such Realm information.
Previously, when a deactivated user was mentioned, he wasn't
rendered as a Pill. This is because the dataset for validating mentions
only included active users, which is fixed by removing that filter.
To allow only silent mentions of them, an extra is_active property
added to FullNameInfo class, which is populated from the query,
which tells if user is deactivated. This is used to convert any
mentions of them to silent mentions in the backend markdown.
Fixes#26857
This commit updates format_user_row to return a TypedDict.
This commit is a prep commit for feature of restricting user
access such that code can be easy to read and understand when
we add that feature.
This commit updates user_profile_to_user_row to return a TypedDict
and also updates the return type of get_realm_user_dicts to be a
TypedDict.
This commit is a prep commit for feature of restricting user
access such that code can be easy to read and understand when
we add that feature.
This is a prep commit for adding feature of restricting
user access to guests such that we can keep the code
easy to read and understand when that feature is added.
Anders Kaseorg
Prakhar Pratyush
Sahil Batra
Alex Vandiver
Alya Abbott
Lauryn Menard
Mateusz Mandera
David Rosa
Tim Abbott
sayyedarib
Karl Stolley
roanster007
shashank-23002
Artur Szcześniak
Chris Bobbe
ColeBurch
swayam0322
sanchi-t
Evgenii
Aman Agrawal
Karl Stolley
Sayam Samal
Vector73
Prakhar Pratyush
kimry02
Lalit
Riken Shah
Satyam Bansal
Greg Price