Django's default SMTP implementation can raise various exceptions
when trying to send an email. In order to allow Zulip calling code
to catch fewer exceptions to handle any cause of "email not
sent", we translate most of them into EmailNotDeliveredException.
The non-translated exceptions concern the connection with the
SMTP server. They were not merged with the rest to keep some
details about the nature of these.
Tests are implemented in the test_send_email.py module.
This will stop dropping events in the case that the background
`maybe_send_batched_email` thread takes longer than 30s. However, see
also #15280 and the TODO comment about how we lose events upon
restart; this worker is still lossy.
Previously the outgoing emails were sent over several SMTP
connections through the EmailSendingWorker; establishing a new
connection each time adds notable overhead.
Redefine EmailSendingWorker worker to be a LoopQueueProcessingWorker,
which allows it to handle batches of events. At the same time, persist
the connection across email sending, if possible.
The connection is initialized in the constructor of the worker
in order to keep the same connection throughout the whole process.
The concrete implementation of the consume_batch function is simply
processing each email one at a time until they have all been sent.
In order to reuse the previously implemented decorator to retry
sending failures a new method that meets the decorator's required
arguments is declared inside the EmailSendingWorker class. This
allows to retry the sending process of a particular email inside
the batch if the caught exception leaves this process retriable.
A second retry mechanism is used inside the initialize_connection
function to redo the opening of the connection until it works or
until three attempts failed. For this purpose the backoff module
has been added to the dependencies and a test has been added to
ensure that this retry mechanism works well.
The connection is closed when the stop method is called.
Fixes: #17672.
This was introduced in 8321bd3f92 to serve as a sort of drop-in
replacement for zerver.lib.queue.queue_json_publish, but its use has
been subsequently cut out (e.g. `9fcdb6c83ac5`).
Remote its last callsite.
django.utils.translation.ugettext is a deprecated alias of
django.utils.translation.gettext as of Django 3.0, and will be removed
in Django 4.0.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The existing organization, of returning an opaque blob from
`build_bot_request`, which was later consumed by
`send_data_to_server`, is not particularly sensible; the steps become
oddly split between the OutgoingWebhookWorker, `do_rest_call`, and the
`OutgoingWebhookServiceInterface`.
Make the `OutgoingWebhookServiceInterface` in charge of building,
making, and returning the request in one method; another method
handles extracting content from a successful response. `do_rest_call`
is responsible for calling both halves of this, and doing common error
handling.
The `deployment` key was only set in `do_report_error`, which is now
only used in one codepath (the queue worker). The logging handlers on
staging call notify_server_error directly, which omits the
`deployment` key.
Remove the odd one-of key, and instead simply do dispatch in
`do_report_error`.
Not all of the workers are known to be safe to interrupt; they might
leave inconsistent state. As such, terminating them with timeouts
should currently only be a last-resort against stalled queues, not a
regular occurrence.
Since the exception can be triggered at arbitrary places in the stack
based on whenever the alarm happens to fire, they do not often group
together.
Explicitly group them together, grouped only by which queue the work
is in.
We already trust ids that are put on our queue
for deferred work. For example, see the code for
"mark_stream_messages_as_read_for_everyone"
We now pass stream_recipient_id when we queue
up work for do_mark_stream_messages_as_read.
This generally saves about 3 queries per
user when we unsubscribe them from a stream.
Since this was using repead individual get() calls previously, it
could not be monitored for having a consumer. Add it in, by marking
it of queue type "consumer" (the default), and adding Nagios lines for
it.
Also adjust missedmessage_emails to be monitored; it stopped using
LoopQueueProcessingWorker in 5cec566cb9, but was never added back
into the set of monitored consumers.
This low-level interface allows consuming from a queue with timeouts.
This can be used to either consume in batches (with an upper timeout),
or one-at-a-time. This is notably more performant than calling
`.get()` repeatedly (what json_drain_queue does under the hood), which
is "*highly discouraged* as it is *very inefficient*"[1].
Before this change:
```
$ ./manage.py queue_rate --count 10000 --batch
Purging queue...
Enqueue rate: 11158 / sec
Dequeue rate: 3075 / sec
```
After:
```
$ ./manage.py queue_rate --count 10000 --batch
Purging queue...
Enqueue rate: 11511 / sec
Dequeue rate: 19938 / sec
```
[1] https://www.rabbitmq.com/consumers.html#fetching
Despite its name, the `queue_size` method does not return the number
of items in the queue; it returns the number of items that the local
consumer has delivered but unprocessed. These are often, but not
always, the same.
RabbitMQ's queues maintain the queue of unacknowledged messages; when
a consumer connects, it sends to the consumer some number of messages
to handle, known as the "prefetch." This is a performance
optimization, to ensure the consumer code does not need to wait for a
network round-trip before having new data to consume.
The default prefetch is 0, which means that RabbitMQ immediately dumps
all outstanding messages to the consumer, which slowly processes and
acknowledges them. If a second consumer were to connect to the same
queue, they would receive no messages to process, as the first
consumer has already been allocated them. If the first consumer
disconnects or crashes, all prior events sent to it are then made
available for other consumers on the queue.
The consumer does not know the total size of the queue -- merely how
many messages it has been handed.
No change is made to the prefetch here; however, future changes may
wish to limit the prefetch, either for memory-saving, or to allow
multiple consumers to work the same queue.
Rename the method to make clear that it only contains information
about the local queue in the consumer, not the full RabbitMQ queue.
Also include the waiting message count, which is used by the
`consume()` iterator for similar purpose to the pending events list.
Otherwise, if consume_func raised an exception for any reason *other*
than the alarm being fired, the still-pending alarm would have fired
later at some arbitrary point in the calling code.
We need two try…finally blocks in case the signal arrives just before
signal.alarm(0).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
SIGALRM is the simplest way to set a specific maximum duration that
queue workers can take to handle a specific message. This only works
in non-threaded environments, however, as signal handlers are
per-process, not per-thread.
The MAX_CONSUME_SECONDS is set quite high, at 10s -- the longest
average worker consume time is embed_links, which hovers near 1s.
Since just knowing the recent mean does not give much information[1],
it is difficult to know how much variance is expected. As such, we
set the threshold to be such that only events which are significant
outliers will be timed out. This can be tuned downwards as more
statistics are gathered on the runtime of the workers.
The exception to this is DeferredWorker, which deals with quite-long
requests, and thus has no enforceable SLO.
[1] https://www.autodesk.com/research/publications/same-stats-different-graphs
Currently, drain_queue and json_drain_queue ack every message as it is
pulled off of the queue, until the queue is empty. This means that if
the consumer crashes between pulling a batch of messages off the
queue, and actually processing them, those messages will be
permanently lost. Sending an ACK on every message also results in a
significant amount lot of traffic to rabbitmq, with notable
performance implications.
Send a singular ACK after the processing has completed, by making
`drain_queue` into a contextmanager. Additionally, use the `multiple`
flag to ACK all of the messages at once -- or explicitly NACK the
messages if processing failed. Sending a NACK will re-queue them at
the front of the queue.
Performance of a no-op dequeue before this change:
```
$ ./manage.py queue_rate --count 50000 --batch
Purging queue...
Enqueue rate: 10847 / sec
Dequeue rate: 2479 / sec
```
Performance of a no-op dequeue after this change (a 25% increase):
```
$ ./manage.py queue_rate --count 50000 --batch
Purging queue...
Enqueue rate: 10752 / sec
Dequeue rate: 3079 / sec
```
This system can't update stats while the queue is idle, without using
threads for this, but at least we ensure to update the file after
consuming an event if more than MAX_SECONDS_BEFORE_UPDATE_STATS passed
since the last update, regardless of the number of iterations done so
far.
The race condition is described in the comment block removed by this
commit. This leaves room for another, remaining race condition
that should be virtually impossible, but nevertheless it seems
worthwhile to have it documented in the code, so we put a new comment
describing it.
As a final note, this is not a new race condition,
it was hypothetically possible with the old code as well.
The query to finds and marks all unread UserMessages in the stream as read
can be quite expensive, so we'll move that work to the deferred_work
queue and split it into batches.
Fixes#15770.
This queue had a race condition with creation of another Timer while
maybe_send_batched_emails is still doing its work, which may cause
two or more threads to be running maybe_send_batched_emails
at the same time, mutating the shared data simultaneously.
Another less likely potential race condition was that
maybe_send_batched_emails after sending out its email, can call
ensure_timer(). If the consume function is run simultaneously
in the main thread, it will call ensure_timer() too, which,
given unfortunate timings, might lead to both calls setting a new Timer.
We add locking to the queue to avoid such race conditions.
Tested manually, by print debugging with the following setup:
1. Making handle_missedmessage_emails sleep 2 seconds for each email,
and changed BATCH_DURATION to 1s to make the queue start working
right after launching.
2. Putting a bunch of events in the queue.
3. ./manage.py process_queue --queue_name missedmessage_emails
4. Once maybe_send_batched_emails is called and while it's processing
the events, I pushed more events to the queue. That triggers the
consume() function and ensure_timer().
Before implementing the locking mechanism, this causes two threads
to run maybe_send_batched_emails at the same time, mutating each other's
shared data, causing a traceback such as
Exception in thread Thread-3:
Traceback (most recent call last):
File "/usr/lib/python3.6/threading.py", line 916, in _bootstrap_inner
self.run()
File "/usr/lib/python3.6/threading.py", line 1182, in run
self.function(*self.args, **self.kwargs)
File "/srv/zulip/zerver/worker/queue_processors.py", line 507, in maybe_send_batched_emails
del self.events_by_recipient[user_profile_id]
KeyError: '5'
With the locking mechanism, things get handled as expected, and
ensure_timer() exits if it can't obtain the lock due to
maybe_send_batched_emails still working.
Co-authored-by: Tim Abbott <tabbott@zulip.com>
The exception trace only goes from where the exception was thrown up
to where the `logging.exception` call is; any context as to where
_that_ was called from is lost, unless `stack_info` is passed as well.
Having the stack is particularly useful for Sentry exceptions, which
gain the full stack trace.
Add `stack_info=True` on all `logging.exception` calls with a
non-trivial stack; we omit `wsgi.py`. Adjusts tests to match.
consume_time_seconds wasn't properly defined at the beginning, so when
a BaseException that isn't a subclass of Exception is thrown, the
finally: block could be entered with it still undefined.
Without this change, pyflakes reports this exception:
pyflakes | zerver/worker/queue_processors.py:152:9 local variable 'e' is assigned to but never used
pyflakes | zerver/worker/queue_processors.py:155:81 undefined name 'e'
We use the EMAIL_TIMEOUT django setting to timeout after 15s of trying
to send an email. This will nicely lead to retries in the email_senders
queue, due to the retry_send_email_failures decorator.
smtlib documentation suggests that socket.timeout can be raised as the
result of timing out, so in attempts I'm getting
smtplib.SMTPServerDisconnected. Either way, seems appropriate to add
socket.timeout to the exception that we catch.
The most import change here is the one in maybe_send_to_registration
codepath, as the insufficient validation there could lead to fetching
an expired PreregistrationUser that was invited as an administrator
admin even years ago, leading to this registration ending up in the
new user being a realm administrator.
Combined with the buggy migration in
0198_preregistrationuser_invited_as.py, this led to users incorrectly
joining as organizations administrators by accident. But even without
that bug, this issue could have allowed a user who was invited as an
administrator but then had that invitation expire and then joined via
social authentication incorrectly join as an organization administrator.
The second change is in ConfirmationEmailWorker, where this wasn't a
security problem, but if the server was stopped for long enough, with
some invites to send out email for in the queue, then after starting it
up again, the queue worker would send out emails for invites that
had already expired.
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This commit adds three `.pysa` model files: `false_positives.pysa`
for ruling out false positive flows with `Sanitize` annotations,
`req_lib.pysa` for educating pysa about Zulip's `REQ()` pattern for
extracting user input, and `redirects.pysa` for capturing the risk
of open redirects within Zulip code. Additionally, this commit
introduces `mark_sanitized`, an identity function which can be used
to selectively clear taint in cases where `Sanitize` models will not
work. This commit also puts `mark_sanitized` to work removing known
false postive flows.
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This saves the completely unnecessary work of mapping the Client name
to its ID. Because we had in-process caching of the immutable Client
objects, this isn't a material performance win, but it will eventually
let us delete that caching logic and have a simpler system.
While this functionality to post slow queries to a Zulip stream was
very useful in the early days of Zulip, when there were only a few
hundred accounts, it's long since been useless since (1) the total
request volume on larger Zulip servers run by Zulip developers, and
(2) other server operators don't want real-time notifications of slow
backend queries. The right structure for this is just a log file.
We get rid of the queue and replace it with a "zulip.slow_queries"
logger, which will still log to /var/log/zulip/slow_queries.log for
ease of access to this information and propagate to the other logging
handlers. Reducing the amount of queues is good for lowering zulip's
memory footprint and restart performance, since we run at least one
dedicated queue worker process for each one in most configurations.
Prior to this change, there were reports of 500s in
production due to `export.extra_data` being a
Nonetype. This was reproducible using the s3
backend in development when a row was created in
the `RealmAuditLog` table, but the export failed in
the `DeferredWorker`. This left an entry lying
about that was never updated with an `extra_data`
field.
To fix this, we catch any exceptions in the
`DeferredWorker`, and then update `extra_data` to
encode the failure. We also fix the fact that we
never updated the export UI table with pending exports.
These changes also negated the use for the somewhat
hacky `clear_success_banner` logic.
We've had a bug for a while that if any ScheduledEmail objects get
created with the wrong email sender address, even after the sysadmin
corrects the problem, they'll still get errors because of the objects
stored with the wrong format.
We solve this by using FromAddress placeholders strings in
send_future_email function, so that ScheduledEmail objects end up
setting the final `from_address` value when mail is actually sent
using the setting in effect at that time.
Fixes#11008.
Several of our queues are capable of doing work that includes
rendering markdown (outgoing_webhook, embedded_bots, embed_links, and
email_mirror). As a result, it's essential that these don't cache
per-request data (specifically, realm filters) longer than they
should, making editing/deleting linkifiers potentially use old
settings until the relevant process was restarted.
Flushing these caches is extremely cheap (just clearing two
dictionaries) and thus is reasonable to do after every queue event,
rather than trying to do it only the ~1/3 of queues that specifically
do markdown processing. We do the same in our middleware for
reset_queries.
It's not worth writing a test for this because it's very difficult to
create the test setup situation for this bug with a single test worker
process; one needs to edit the linkifier configuration in a different
process than the one sending the message in order to see the bug.
This was a much larger visible bug on Zulip 2.1.x, where the presence
of the message_sender queue meant that this would apply to messages
sent via a browser.
Fixes#14095.
Note that while the test mocks the actual message
send, we now have a `get_stream` call in the queue
worker, so we have to set up a real stream for
testing (or we could have mocked that as well, but
it didn't seem necessary). The setup queries add
to the amount of queries reported by the test,
plus the `get_stream` call. I just made the
query count a digits regex, which is a little bit
lame, but I don't think it's worth risking test
flakes for this.
This legacy cross-realm bot hasn't been used in several years, as far
as I know. If we wanted to re-introduce it, I'd want to implement it
as an embedded bot using those common APIs, rather than the totally
custom hacky code used for it that involves unnecessary queue workers
and similar details.
Fixes#13533.
Zulip has had a small use of WebSockets (specifically, for the code
path of sending messages, via the webapp only) since ~2013. We
originally added this use of WebSockets in the hope that the latency
benefits of doing so would allow us to avoid implementing a markdown
local echo; they were not. Further, HTTP/2 may have eliminated the
latency difference we hoped to exploit by using WebSockets in any
case.
While we’d originally imagined using WebSockets for other endpoints,
there was never a good justification for moving more components to the
WebSockets system.
This WebSockets code path had a lot of downsides/complexity,
including:
* The messy hack involving constructing an emulated request object to
hook into doing Django requests.
* The `message_senders` queue processor system, which increases RAM
needs and must be provisioned independently from the rest of the
server).
* A duplicate check_send_receive_time Nagios test specific to
WebSockets.
* The requirement for users to have their firewalls/NATs allow
WebSocket connections, and a setting to disable them for networks
where WebSockets don’t work.
* Dependencies on the SockJS family of libraries, which has at times
been poorly maintained, and periodically throws random JavaScript
exceptions in our production environments without a deep enough
traceback to effectively investigate.
* A total of about 1600 lines of our code related to the feature.
* Increased load on the Tornado system, especially around a Zulip
server restart, and especially for large installations like
zulipchat.com, resulting in extra delay before messages can be sent
again.
As detailed in
https://github.com/zulip/zulip/pull/12862#issuecomment-536152397, it
appears that removing WebSockets moderately increases the time it
takes for the `send_message` API query to return from the server, but
does not significantly change the time between when a message is sent
and when it is received by clients. We don’t understand the reason
for that change (suggesting the possibility of a measurement error),
and even if it is a real change, we consider that potential small
latency regression to be acceptable.
If we later want WebSockets, we’ll likely want to just use Django
Channels.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Addresses point 1 of #13533.
MissedMessageEmailAddress objects get tied to the specific that was
missed by the user. A useful benefit of that is that email message sent
to that address will handle topic changes - if the message that was
missed gets its topic changed, the email response will get posted under
the new topic, while in the old model it would get posted under the
old topic, which could potentially be confusing.
Migrating redis data to this new model is a bit tricky, so the migration
code has comments explaining some of the compromises made there, and
test_migrations.py tests handling of the various possible cases that
could arise.
QueueProcessingWorker and LoopQueueProcessingWorker are abstract classes
meant to be subclassed by a class that will define its own consume()
or consume_batch() method. ABCs are suited for that and we can tag
consume/consume_batch with the @abstractmethod wrapper which will
prevent subclasses that don't define these methods properly to be
impossible to even instantiate (as opposed to only crashing once
consume() is called). It's also nicely detected by mypy, which will
throw errors such as this on invalid use:
error: Only concrete class can be given where "Type[TestWorker]" is
expected
error: Cannot instantiate abstract class 'TestWorker' with abstract
attribute 'consume'
Due to it being detected by mypy, we can remove the test
test_worker_noconsume which just tested the old version of this -
raising an exception when the unimplemented consume() gets called. Now
it can be handled already on the linter level.
LoopQueueProcessingWorker can handle exceptions inside consume_batch in
a similar manner to how QueueProcessingWorker handles exceptions inside
consume.
We use the plumbing introduced in a previous commit, to now raise
PushNotificationBouncerRetryLaterError in send_to_push_bouncer in case
of issues with talking to the bouncer server. That's a better way of
dealing with the errors than the previous approach of returning a
"failed" boolean, which generally wasn't checked in the code anyway and
did nothing.
The PushNotificationBouncerRetryLaterError exception will be nicely
handled by queue processors to retry sending again, and due to being a
JsonableError, it will also communicate the error to API users.
We add PushNotificationBouncerRetryLaterError as an exception to signal
an error occurred when trying to communicate with the bouncer and it
should be retried. We use JsonableError as the base class, because this
signal will need to work in two roles:
1. When the push notification was being issued by the queue worker
PushNotificationsWorker, it will signal to the worker to requeue the
event and try again later.
2. The exception will also possibly be raised (this will be added in the
next commit) on codepaths coming from a request to an API endpoint (for
example to add a token, to users/me/apns_device_token). In that case,
it'll be needed to provide a good error to the API user - and basing
this exception on JsonableError will allow that.
This includes adding a new endpoint to the push notification bouncer
interface, and code to call it appropriately after resetting a user's
personal API key.
When we add support for a user having multiple API keys, we may need
to add an additional key here to support removing keys associated with
just one client.
A confirmation object is already created when
do_send_confirmation_email is called just above.
Tweaked by tabbott to remove an unnecessary somewhat hacky database
query.
This should dramatically improve the queue processor's performance in
cases where there's a very high volume of requests on a given endpoint
by a given user, as described in the new docstring.
Until we test this more broadly in production, we won't know if this
is a full solution to the problem, but I think it's likely. We've
never seen the UserActivityInterval worker end up backlogged without a
total queue processor outage, and it should have a similar workload.
Fixes#13180.
We don't actually need to go to the memcached (falling back to the
database) to fetch either user or client objects on every event. For
user objects, we actually can just pass through the user ID
transparently; for client objects, we can use an in-process cache,
since the mapping of string to ID never changes.
Hopefully this does a better job of spurring people to action, and also
suggests a self-service fix if they don't (i.e. contacting the person that
invited them).
zerver/openapi/python_examples.py:105: error: Argument 1 to "get_user_presence" of "Client" has incompatible type "str"; expected "Dict[str, Any]"
zerver/openapi/python_examples.py:563: error: Argument 1 to "add_reaction" of "Client" has incompatible type "Dict[str, object]"; expected "Dict[str, str]"
zerver/openapi/python_examples.py:576: error: Argument 1 to "remove_reaction" of "Client" has incompatible type "Dict[str, object]"; expected "Dict[str, str]"
zerver/worker/queue_processors.py:587: error: Argument "client" to "extract_query_without_mention" has incompatible type "EmbeddedBotHandler"; expected "ExternalBotHandler"
These were only missed because mypy daemon mode requires us to set
`follow_imports = skip` for the `zulip` package.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This feature is intended to cover all of our ways of exporting a
realm, not just the initial "public export" feature, so we should name
things appropriately for that goal.
Additionally, we don't want to include data exports in page_params;
the original implementation was actually buggy and would have.
We were seeing errors when pubishing typical events in the form of
`Dict[str, Any]` as the expected type to be a `Union`. So we instead
change the only non-dictionary call, to pass a dict instead of `str`.
The RealmAuditLog object ID was stored in the event sent to the
deferred_work queue as a means to update the row's extra_data field.
The extra_data field then stores the location of the export.
A unique path was created using the `LOCAL_UPLOADS_DIR` backend, similar
to the code used in `LocalUploadBackend`. The exported tarball was
copied to the directory, and an nginx url was created to serve the file
publicly.
Tweaked by tabbott to output an actual URL.
The upload option will no longer be limited to strictly S3 uploads. This
commit serves as a preliminary step for supporting LOCAL_UPLOADS_DIR as
part of the public only export feature.
An endpoint was created in zerver/views. Basic rate-limiting was
implemented using RealmAuditLog. The idea here is to simply log each
export event as a realm_exported event. The number of events
occurring in the time delta is checked to ensure that the weekly
limit is not exceeded.
The event is published to the 'deferred_work' queue processor to
prevent the export process from being killed after 60s.
Upon completion of the export the realm admin(s) are notified.
Closes#2420
We add rate limiting (max X emails withing Y seconds per realm) to the
email mirror. By creating RateLimitedRealmMirror class, inheriting from
RateLimitedObject, and rate_limit_mirror_by_realm function, following a
mechanism used by rate_limit_user, we're able to have this
implementation mostly rely on the already existing, and proven over
time, rate_limiter.py code. The rules are configurable in settings.py in
RATE_LIMITING_MIRROR_REALM_RULES, analogically to RATE_LIMITING_RULES.
Rate limit verification happens in the MirrorWorker in
queue_processors.py. We don't rate limit missed message emails, as due
to using one time addresses, they're not a spam threat.
test_mirror_worker is adapted to the altered MirrorWorker code and a new
test - test_mirror_worker_rate_limiting is added in test_queue_worker.py
to provide coverage for these changes.
When a bunch of messages with active notifications are all read at
once -- e.g. by the user choosing to mark all messages, or all in a
stream, as read, or just scrolling quickly through a PM conversation
-- there can be a large batch of this information to convey. Doing it
in a single GCM/FCM message is better for server congestion, and for
the device's battery.
The corresponding client-side logic is in zulip/zulip-mobile#3343 .
Existing clients today only understand one message ID at a time; so
accommodate them by sending individual GCM/FCM messages up to an
arbitrary threshold, with the rest only as a batch.
Also add an explicit test for this logic. The existing tests
that happen to cause this function to run don't exercise the
last condition, so without a new test `--coverage` complains.
This adds language paramater to send_future_email. As a result, this
properly internationalizes invitation reminder emails, by passing
correct language into send_future_email.
Fixes#11240.
Apparently, we have a second code path where we might try to call
send_email library functions on old data, namely in the
queue_processors codebase. So we apply the same migration logic here.
This adds a function that sends provided email to all administrators
of a realm, but in a single email. As a result, send_email now takes
arguments to_user_ids and to_emails instead of to_user_id and
to_email.
We adjust other APIs to match, but note that send_future_email does
not yet support the multiple recipients model for good reasons.
Tweaked by tabbott to modify `manage.py deliver_email` to handle
backwards-compatibily for any ScheduledEmail objects already in the
database.
Fixes#10896.
This library was absolutely essential as part of our Python 2->3
migration process, but all of its calls should be either no-ops or
encode/decode operations.
Note also that the library has been wrong since the incorrect
refactoring in 1f9244e060.
Fixes#10807.
While it could make sense to print these logging statements at WARN
level on server startup, it doesn't make sense to do so on every
message (though it perhaps did make sense to do so before more recent
changes added good ways to discover you forgot to configure push
notifications).
Instead, we now just do a WARN log on queue processor startup, and
then at DEBUG level for individual messages.
Fixes#10894.
Previously, MissedMessageWorker used a batching strategy of just
grabbing all the events from the last 2 minutes, and then sending them
off as emails. This suffered from the problem that you had a random
time, between 0s and 120s, to edit your message before it would be
sent out via an email.
Additionally, this made the queue had to monitor, because it was
expected to pile up large numbers of events, even if everything was
fine.
We fix this by batching together the events using a timer; the queue
processor itself just tracks the items, and then a timer-handler
process takes care of ensuring that the emails get sent at least 120s
(and at most 130s) after the first triggering message was sent in Zulip.
This introduces a new unpleasant bug, namely that when we restart a
Zulip server, we can now lose some missed_message email events;
further work is required on this point.
Fixes#6839.
This fixes a couple things:
* process_event() is a pretty vague name
* returning tuples should generally be avoided
* we were producing the same REST parameters in both
subclasses
* relative_url_path was always blank
* request_kwargs was always empty
Now process_event() is called build_bot_request(),
and it only returns request data,
not a tuple of `rest_operation` and `request_data`.
By no longer returning `rest_operation`, there are
fewer moving parts. We just have `do_rest_call` make
a POST call.
Before this change, we instantiated base_url into a superclass
of subclasses that returned base_url into a dictionary that
gets returned to our caller.
Now we just pull base_url out of service when we need to make
the REST call.
This uses the recently introduced active_mobile_push_notification
flag; messages that have had a mobile push notification sent will have
a removal push notification sent as soon as they are marked as read.
Note that this feature is behind a setting,
SEND_REMOVE_PUSH_NOTIFICATIONS, since the notification format is not
supported by the mobile apps yet, and we want to give a grace period
before we start sending notifications that appear as (null) to
clients. But the tracking logic to maintain the set of message IDs
with an active push notification runs unconditionally.
This is designed with at-least-once semantics; so mobile clients need
to handle the possibility that they receive duplicat requests to
remove a push notification.
We reuse the existing missedmessage_mobile_notifications queue
processor for the work, to avoid materially impacting the latency of
marking messages as read.
Fixes#7459, though we'll need to open a follow-up issue for
using these data on iOS.
Private messages are not supported in Slack-format webhook.
Instead of raising a NotImplementedError, we warn the user
that PM service is not supported by sending a message to the
user.
Added tests for the same.
Fixes#9239
We already had a setting for whether these logs were enabled; now it
also controls which stream the messages go to.
As part of this migration, we disable the feature in dev/production by
default; it's not useful for most environments.
Fixes the proximal data-export issue reported in #10078 (namely, a
stream with nobody ever subscribed to having been created).
Slow queries during backend tests sends messages to Error Bot
which affects the database state causing the tests to fail.
This fixes the occasional flakes due to that.
These two classes are tricky to test, and nocoverage-ing them
allows us to mark queue_processors.py as fully covered. We
still want to cover these two workers at some point, but for
now, it's nice to enforce full coverage for any future changes
to queue_processors.py.
Fixes (sort of) #6542.
We already check in get_service_bot_events() if a bot is mentioned,
and then only pass on the call to the bot handler if it is. The
commit removes the additional check in the embedded bot queue
processor simply because it is impossible to obtain test coverage
for it (there is no meaningful way to trigger the content of the
if-clause, because there will never be a message reaching the bot
without @-mentioning it.
To alleviate the danger of a potential regression, the check is not
removed completely, but rather replaced by an assert statement.
Revert c8f034e9a "queue: Remove missedmessage_email_senders code."
As the comment in the code says, it ensures a smooth upgrade path
from 1.7.x; we can delete it in master after 1.8.0 is released.
The removal commit was merged early due to a communication failure.
Cyril Pletinckx
Alex Vandiver
Anders Kaseorg
Tim Abbott
Mateusz Mandera
Steve Howell
Abhijeet Prasad Bodas
Mateusz Mandera
Vishnu KS
Anders Kaseorg
Graham Bleaney
Mateusz Mandera
Wyatt Hoodes
arpit551
Tim Abbott
Steve Howell
Rishi Gupta
neiljp (Neil Pilgrim)
Greg Price
Anders Kaseorg
Pragati Agrawal
Raymond Akornor
Rhea Parekh
Sampriti Panda
Robert Hönig