On a system where ‘apt-get update’ has never been run, ‘apt-cache
policy’ may show no repositories at all. Try to correct this with
‘apt-get update’ before giving up.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
If nginx was already installed, and we're using the webroot method of
initializing certbot, nginx needs to be reloaded. Hooks in
`/etc/letsencrypt/renewal-hooks/deploy/` do not run during initial
`certbot certonly`, so an explicit reload is required.
The certbot package installs its own systemd timer (and cron job,
which disabled itself if systemd is enabled) which updates
certificates. This process races with the cron job which Zulip
installs -- the only difference being that Zulip respects the
`certbot.auto_renew` setting, and that it passes the deploy hook.
This means that occasionally nginx would not be reloaded, when the
systemd timer caught the expiration first.
Remove the custom cron job and `certbot-maybe-renew` script, and
reconfigure certbot to always reload nginx after deploying, using
certbot directory hooks.
Since `certbot.auto_renew` can't have an effect, remove the setting.
In turn, this removes the need for `--no-zulip-conf` to
`setup-certbot`. `--deploy-hook` is similarly removed, as running
deploy hooks to restart nginx is now the default; pass
`--no-directory-hooks` in standalone mode to not attempt to reload
nginx. The other property of `--deploy-hook`, of skipping symlinking
into place, is given its own flog.
We've had a number of unhappy reports of upgrades failing due to
webpack requiring too much memory. While the previous commit will
likely fix this issue for everyone, it's worth improving the error
message for failures here.
We avoid doing the stop+retry ourselves, because that could cause an
outage in a production system if webpack fails for another reason.
Fixes#20105.
Since the upgrade to Webpack 5, we've been seeing occasional reports
that servers with roughly 4GiB of RAM were getting OOM kills while
running webpack.
Since we can't readily optimize the memory requirements for webpack
itself, we should raise the RAM requirements for doing the
lower-downtime upgrade strategy.
Fixes#20231.
Stopping both `zulip-tornado` and `zulip-tornado:*` causes errors on
deploys with tornado sharding, as the plain `zulip-tornado` service
does not exist.
Pass `zulip-tornado:*`, which matches both plain `zulip-tornado`, as
well as the sharded `zulip-tornado:zulip-tornado-port-9800` cases.
The `analyze_new_cluster.sh` script output by `pg_upgrade` just runs
`vacuumdb --all --analyze-in-stages`, which runs three passes over the
database, getting better stats each time. Each of these passes is
independent; the third pass does not require the first two.
`--analyze-in-stages` is only provided to get "something" into the
database, on the theory that it could then be started and used. Since
we wait for all three passes to complete before starting the database,
the first two passes add no value.
Additionally, PosttgreSQL 14 and up stop writing the
`analyze_new_cluster.sh` script as part of `pg_upgrade`, suggesting
the equivalent `vacuumdb --all --analyze-in-stages` call instead.
Switch to explicitly call `vacuumdb --all --analyze-only`, since we do
not gain any benefit from `--analyze-in-stages`. We also enable
parallelism, with `--jobs 10`, in order to analyze up to 10 tables in
parallel. This may increase load, but will accelerate the upgrade
process.
scripts.lib.node_cache expects Yarn to be in /srv/zulip-yarn, so if
it’s installed somewhere else, even if it’s the right version, we need
to reinstall it.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
It recently started failing on Debian 10 (buster). We immediately
follow this by replacing these packages with our own versions from
pip.txt, anyway.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The support for bullseye was added in #17951
but it was not documented as bullseye was
frozen and did not have proper configuration
files, hence wasn't documented.
Since now bullseye is released as a stable
version, it's support can be documented.
The usual output from this command looks like
Notice: Compiled catalog for localhost in environment production in 2.33 seconds
Notice: /Stage[main]/Zulip::Apt_repository/Exec[setup_apt_repo]/returns: current_value 'notrun', should be ['0'] (noop)
Notice: Class[Zulip::Apt_repository]: Would have triggered 'refresh' from 1 event
Notice: Stage[main]: Would have triggered 'refresh' from 1 event
Notice: Applied catalog in 1.20 seconds
which doesn’t seem abnormally alarming, and hiding it makes failures
harder to diagnose.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
We previously used `zulip-puppet-apply` with a custom config file,
with an updated PostgreSQL version but more limited set of
`puppet_classes`, to pre-create the basic settings for the new cluster
before running `pg_upgradecluster`.
Unfortunately, the supervisor config uses `purge => true` to remove
all SUPERVISOR configuration files that are not included in the puppet
configuration; this leads to it removing all other supervisor
processes during the upgrade, only to add them back and start them
during the second `zulip-puppet-apply`.
It also leads to `process-fts-updates` not being started after the
upgrade completes; this is the one supervisor config file which was
not removed and re-added, and thus the one that is not re-started due
to having been re-added. This was not detected in CI because CI added
a `start-server` command which was not in the upgrade documentation.
Set a custom facter fact that prevents the `purge` behaviour of the
supervisor configuration. We want to preserve that behaviour in
general, and using `zulip-puppet-apply` continues to be the best way
to pre-set-up the PostgreSQL configuration -- but we wish to avoid
that behaviour when we know we are applying a subset of the puppet
classes.
Since supervisor configs are no longer removed and re-added, this
requires an explicit start-server step in the instructions after the
upgrades complete. This brings the documentation into alignment with
what CI is testing.
These changes are all independent of each other; I just didn’t feel
like making dozens of commits for them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
For our marketing emails, we want a width that's more appropriate for
newsletter context, vs. the narrow emails we use for transactional
content.
I haven't figured out a cleaner way to do this than duplicating most
of email_base_default.source.html. But it's not a big deal to
duplicate, since we've been changing that base template only about
once a year.
The script is added to upgrade steps for 20.04 and Buster because
those are the upgrades that cross glibc 2.28, which is most
problematic. It will also be called out in the upgrade notes, to
catch those that have already done that upgrade.
Running `supervisorctl stop` or `supervisorctl restart` on a process
name which is not known is an error:
```
$ supervisorctl stop nonexistent-process
nonexistent-process: ERROR (no such process)
$ echo $?
1
```
ef6d0ec5ca moved
zulip_deliver_scheduled_* out of the `workers:` group. Since upgrades
run `stop-server` before applying puppet, the list of processes at
that time is from the previous version of Zulip, so may not have the
new `zulip_deliver_scheduled_*` names -- and the `stop-server` will
hence fail.
If the upgrade is not applying puppet, it will `restart-server`. At
that point, the old names will still be in the configuration, so
relying on the current `superisorctl status` is the best gauge of what
exists to restart.
In short, only ever stop/start/restart the `zulip_deliver_scheduled_*`
processes if `supervisorctl status` knows about them already.
Nonexistent processes and groups passed to `supervisortctl status` are
printed to STDOUT as follows:
```
$ supervisorctl status zulip-django nonexistent-process nonexistent-group:*
nonexistent-process: ERROR (no such process)
nonexistent-group: ERROR (no such group)
zulip-django RUNNING pid 16043, uptime 17:31:31
```
On supervisor 4 and above, this exits with an exit code of 4;
previously, it returned exit code 0. Ubuntu 18.04 has version 3.3.1,
and Ubuntu 20.04 has version 4.1.0.
Skip any lines with `ERROR (no such ...)`, and accept exit code 4 from
`supervisorctl status`.
Mypy can’t follow absolute imports based on directories other than the
root. This was hiding some type errors due to ignore_missing_imports.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
With two space-separated classes in `puppet_classes`, the second one
is silently ignored. With three of more, puppet generates the
following very opaque error message:
```
Error: Could not parse for environment production: This
Name has no effect. A value was produced and then forgotten (one or
more preceding expressions may have the wrong form)
```
Catch when this has happened, and give an error message to the user.
Fixes#18992.
This command is part of a statsd infrastructure that we stopped
supporting years ago. Its only purpose for some time has been to
provide sample code for how the restart script might trigger a
notification to a graphing system, which doesn't justify maintaining
it.
Fixes part of #18898.
Anders Kaseorg
Alex Vandiver
Tim Abbott
rht
Gaurav Pandey
manavdesai27