Use the validation of the tornado sharding config that
`stage_updated_sharding` does, by depending on it. This ensures that
we don't write out a supervisor or nginx config based on a
bad (e.g. non-sequential) list of tornado ports.
Fingerprinting the config is somewhat brittle -- it requires either
custom bootstrapping for old (fingerprint-less) configs, and may have
false-positives.
Since generating the config is lightweight, do so into the .tmp files,
and compare the output to the originals to determine if there are
changes to apply.
In order to both surface errors, as well as notify the user in case a
restart is necessary, we must run it twice. The `onlyif`
functionality cannot show configuration errors to the user, only
determine if the command runs or not. We thus run the command once,
judging errors as "interesting" enough to run the actual command,
whose failure will be verbose in Puppet and halt any steps that depend
on it.
Removing the `onlyif` would result in `stage_updated_sharding` showing
up in the output of every Puppet run, which obscures the important
messages it displays when an update to sharding is necessary.
Removing the `command` (e.g. making it an `echo`) would result in
removing the ability to report configuration errors. We thus have no
choice but to run it twice; this is thankfully low-overhead.
We can compute the intended number of processes from the sharding
configuration. In doing so, also validate that all of the ports are
contiguous.
This removes a discrepancy between `scripts/lib/sharding.py` and other
parts of the codebase about if merely having a `[tornado_sharding]`
section is sufficient to enable sharding. Having behaviour which
changes merely based on if an empty section exists is surprising.
This does require that a (presumably empty) `9800` configuration line
exist, but making that default explicit is useful.
After this commit, configuring sharding can be done by adding to
`zulip.conf`:
```
[tornado_sharding]
9800 = # default
9801 = other_realm
```
Followed by running `./scripts/refresh-sharding-and-restart`.
In development and test, we keep the Tornado port at 9993 and 9983,
respectively; this allows tests to run while a dev instance is
running.
In production, moving to port 9800 consistently removes an odd edge
case, when just one worker is on an entirely different port than if
two workers are used.
Without an explicit port number, the `stdout_logfile` values for each
port are identical. Supervisor apparently decides that it will
de-conflict this by appending an arbitrary number to the end:
```
/var/log/zulip/tornado.log
/var/log/zulip/tornado.log.1
/var/log/zulip/tornado.log.10
/var/log/zulip/tornado.log.2
/var/log/zulip/tornado.log.3
/var/log/zulip/tornado.log.7
/var/log/zulip/tornado.log.8
/var/log/zulip/tornado.log.9
```
This is quite confusing, since most other files in `/var/log/zulip/`
use `.1` to mean logrotate was used. Also note that these are not all
sequential -- 4, 5, and 6 are mysteriously missing, though they were
used in previous restarts. This can make it extremely hard to debug
logs from a particular Tornado shard.
Give the logfiles a consistent name, and set them up to logrotate.
Making this include "zulip-tornado" makes it clearer in supervisor
logs. Without this, one only sees:
```
2020-09-14 03:43:13,788 INFO waiting for port-9807 to stop
2020-09-14 03:43:14,466 INFO stopped: port-9807 (exit status 1)
2020-09-14 03:43:14,469 INFO spawned: 'port-9807' with pid 24289
2020-09-14 03:43:15,470 INFO success: port-9807 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
```
This supports running puppet to pick up new sharding changes, which
will warn of the need to finalize them via
`refresh-sharding-and-restart`, or simply running that directly.
Clients that close their socket to nginx suddenly also cause nginx to close
its connection to uwsgi. When uwsgi finishes computing the response,
it thus tries to write to a closed socket, and generates either
IOError or SIGPIPE failures.
Since these are caused by the _client_ closing the connection
suddenly, they are not actionable by the server. At particularly high
volumes, this could represent some sort of server-side failure;
however, this is better detected by examining status codes at the
loadbalancer. nginx uses the error code 499 for this occurrence:
https://httpstatuses.com/499
Stop uwsgi from generating this family of exception entirely, using
configuration for uwsgi[1]; it documents these errors as "(annoying),"
hinting at their general utility."
[1] https://uwsgi-docs.readthedocs.io/en/latest/Options.html#ignore-sigpipe
Increasing the uwsgi listen backlog is intended to allow it to handle
higher connection rates during server restart, when many clients may
be trying to connect. The kernel, in turn, needs to have a
proportionally increased somaxconn soas to not refuse the connection.
Set somaxconn to 2x the uwsgi backlog, but no lower than the
default (128).
Prior to PostgreSQL 12, the `recovery_target_timeline` setting is only
valid in a `recovery.conf` file, as that file has its own
configuration parser. As such, including it in `postgresql.conf`
results in an error, and PostgreSQL will fail to start.
Remove the setting, reverting bff3b540b1. This fixes PostgreSQL 9.5,
9.6, 10, and 11; while the setting is not an error in a PostgreSQL 12
configuration file, it is unnecessary since `latest` is the default.
7d4a370a57 attempted to move the replication check to on the
PostgreSQL hosts. While it updated the _check_ to assume it was
running and talking to a local PostgreSQL instance, the configuration
and installation for the check were not updated. As such, the check
ran on the nagios host for each DB host, and produced no output.
Start distributing the check to all apopdb hosts, and configure nagios
to use the SSH tunnel to get there.
wal-g was used in `puppet/zulip` by env-wal-g, but only installed in
`puppet/zulip_ops`.
Merge all of the dependencies of doing backups using wal-g (wal-g
installation, the pg_backup_and_purge job, the nagios plugin that
verifies it happens) into a common base class in `puppet/zulip`, since
it is generally useful.
No plugins are installed inside the /usr/local/munin/lib this creates
in munin-node, nor are they symlinked into /etc/munin/plugins, so
non-default plugins are added by this.
The one complexity is that hosts_fullstack are treated differently, as
they are not currently found in the manual `hosts` list, and as such
do not get munin monitoring.
check_memcached does not support memcached authentication even in its
latest release (it’s in a TODO item comment, and that’s it), and was
never particularly useful.
When supervisor is first installed, it is started automatically, and
creates the socket, owned by root. Subsequent reconfiguration in
puppet only calls `reread + update`, which is insufficient to apply
the `chown = zulip:zulip` line in `supervisord.conf`, leaving the
socket owned by `root` and the last part of the installation unable to
restart `supervisor` services as the `zulip` user. The `chown` line
in `scripts/lib/install` exists to paper over this.
Add a separate exec target for changes to `supervisord.conf` itself,
which restarts the full service. This leaves the default `restart`
action on the service for the lightweight `reread + update` action,
which is more common.
We use `systemctl` only on redhat-esque builds, because CI runs
Ubuntu, but init is not systemd in that context. `systemctl reload`
is sufficient to re-apply the socket ownership, but a full `restart`
and not `reload` is necessary under `/etc/init.d/supervisor`.
wal-g has a slihghtly different format than wal-e in its `backup-list`
output; it only contains three columns:
- `name`
- `last_modified`,
- `wal_segment_backup_start`
..rather than wal-e's plethora, most of which were blank:
- `name`
- `last_modified`
- `expanded_size_bytes`
- `wal_segment_backup_start`
- `wal_segment_offset_backup_start`
- `wal_segment_backup_stop`
- `wal_segment_offset_backup_stop`
Remove one argument from the split.
In Bionic, nagios-plugins-basic is a transitional package which
depends on monitoring-plugins-basic. In Focal, it is a virtual
package, which means that every time puppet runs, it tries to
re-install the nagios-plugins-basic package.
Switch all instances to referring to `$zulip::common::nagios_plugins`,
and repoint that to monitoring-plugins-basic.
Frontend hosts in multiple-host configurations (including docker
hosts) need a `psql` binary installed. ca9d27175b switched to not
setting `postgresql.version` in `zulip.conf`, which in turn means that
`$zulip::base::postgres_version` is unset. This, in turn, led to the
frontend hosts installing `postgresql-client-`, whose trailing dash
causes apt to _uninstall_ that package.
Unconditionally install `postgresql-client` with no explicit version
attached. This is a metapackage which depends on the latest client
package, which currently means it will install `postgresql-client-12`.
On single-host installs which have configured `postgresql.version` in
`zulip.conf` to be a lower version, this will result in
`postgresql-client-12` existing alongside another
version (e.g. `postgresql-client-10`); `psql` will give the most
recent. This is acceptable because the semantic meaning of the
postgresql version in `zulip.conf` is about the database engine
itself, not the command-line client.
Support for Xenial and Stretch was removed (5154ddafca, 0f4b1076ad,
8944e0ad53, 79acd5ae40, 1219a2e854), but not all codepaths were
updated to remove their conditionals on it.
Remove all code predicated on Xenial or Stretch. debathena support
was migrated to Bionic, since that appears to be the current state of
existing debathena servers.
This prevents memcached from automatically appending the hostname to
the username, which was a source of problems on servers where the
hostname was changed.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
We would prefer to use the postgres packages from Postgres themselves,
if available. However, this requires ensures that, for existing
installs, we preserve the same version of postgres as their base
distribution installed.
Move the version-determination logic from being computed at puppet
interpolation time, to being computed at install time and pinned into
zulip.conf.
Since 9e8f1aacb3, zulip_ops machines
might have two Package declarations for `certbot`, which doesn't work
in puppet.
The fix is, as usual, to use our `zulip::safepackage` wrapper instead.
The style guide for Zulip is to always use "primary" and "replica"
when describing database replication. Adjust a few comments under
`puppet/` that do not adhere to this.
Unfortunately, some references still remain to the insensitive and
inaccurate "master" / "slave" terminology. However, these are only in
files which we are attempting to preserve as close to the upstream
versions they are derived from (e.g. postgresql.conf,
postfix/master.cf).
65774e1c4f switched from using the bundled check_postgres.pl to using
the version from packages; the file itself remained, however.
Remove it, and clean up references to it.
Fixes#15389.
Instead of SSH'ing around to them, run directly on the database hosts.
This means that the replicas do not know how many bytes behind they
are in _receiving_ the wall logs; thus, the monitoring also extends to
the primary database, which knows that information for each replica.
This also allows for detecting when there are too few active replicas.
Use read-only types (List ↦ Sequence, Dict ↦ Mapping, Set ↦
AbstractSet) to guard against accidental mutation of the default
value.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
All differences between the primary and replica roles having been
merged, fold the `postgres_common`, `postgres_master`, and
`postgres_slave` roles into just `postgres_appdb`.
These values differed between the primary and secondary database
hosts, for unclear reasons. The differences date back to their
introduction in 387f63deaa. As the comment in the replica
confguration notes, settings of `vm.dirty_ratio = 10` and
`vm.dirty_background_ratio = 5` matched the kernel defaults for
"newer" kernels; however, kernel 2.6.30 bumped those to 20 and 10,
respectively[1], as a fix for underlying logic now being more correct.
Remove these overrides; they should at very least be consistent across
roles, and the previous values look to be an attempt to tune for a
very much older version of the Linux kernel, which was using an
different, buggier, algorithm under the hood.
[1] 1b5e62b42b
This file controls streaming replication, and recovery using wal-g on
the secondary. The `primary_conninfo` data needs to change on short
notice when database failover happens, in a way that is not suitable
for being controlled by puppet.
PostgreSQL 12, in fact, removes the use of the `recovery.conf` file[1];
the `primary_conninfo` and `restore_command` information goes into the
main `postgresql.conf` file, and the standby status is controlled by
the presence of absence of an empty `standby.signal` file.
Remove the puppet control of the `recovery.conf` file.
[1] https://pgstef.github.io/2018/11/26/postgresql12_preview_recovery_conf_disappears.html
Since the nagios authentication is stored _in the database_, it is
unnecessary to run if the database is simply a replica of the
production database. The only case in which this statement would have
an effect is if the postgres node contains a _different_ (or empty)
database, which `setup_disks` now effectively prevents.
Remove the unnecessary step.
481613a344 updated the `setup_disks` script to no longer reference
`mdadm`, since we no longer set up RAID on servers.
Update the puppet that would call it to remove the `mdadm` dependency,
and run only if the state is not what it produces -- namely, a symlink
for `/var/lib/postgresql`, which must point to an existent
`/srv/postgresql` directory.
The end state it produces is _either_:
- `/srv/postgresql` already existed, which was symlinked into
`/var/lib/postgresql`; postgres is left untouched. This is the
situation if `setup_disks` is run on the database primary, or a
replica which was correctly configured.
- An empty `/srv/postgresql` now exists, symlinked into
`/var/lib/postgresql`, and postgres is stopped. This is the
situation if `puppet` was just run on a new host, or a
previously-configured host was rebooted (clearing the temporary
disk in `/dev/nvme0`)
In the latter case, where `/srv/postgresql` is now empty, any previous
contents of `/var/lib/postgresql` are placed under `/root`,
timestamped for uniqueness.
In either case, the tool should now be idempotent.
This fixes errors when provisioning a new system (or version of
postgres) when the configuration file cannot be written because its
parent directories do not exist.
Files inherently depend on their containing directories, so no
explicit dependencies are necessary.
The `pg_datadir` variable was only used, and accurate, for CentOS.
Pull it out into `postgres_app_base`, broaden it to being accurate on
Debian-based systems as well, and use it consistently in the
templates.
As the previous commit, this is currently only used in tuning, but is
a property of the whole postgres configuration; move it there, as just
the directory, not the file.
Use this directory consistently in the erb templates. Since we
produce a `pg_hba.conf`, it makes sense that we point to the path that we
know that we explicitly wrote to, for instance.
While it is only currently used in the tuning configuration, it is a
property of the base configuration, and fits more clearly into the
case block there.
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
1f565a9f41 removed the `package` lines which install
`python-dateutil`, but not the line in `puppet_ops` that reference it;
as such, Puppet manifests in puppet_ops fail to compile.
Remove the stale reference to `python-dateutil`, which is unnecessary
since the code is python3, not python2.
The zulip user needs to be able to read the file, when running the
backup tool.
We put root:root as owner on other nginx config files, so it's probably
correct to keep the ownership as it is, and set the mode to 0644.
certbot-auto doesn’t work on Ubuntu 20.04, and won’t be updated; we
migrate to instead using the certbot package shipped with the OS
instead. Also made sure that sure certbot gets installed when running
zulip-puppet-apply, to handle existing systems.
We're migrating to using the cleaner zulip.com domain, which involves
changing all of our links from ReadTheDocs and other places to point
to the cleaner URL.
datetime.timezone is available in Python ≥ 3.2. This also lets us
remove a pytz dependency from the PostgreSQL scripts.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This is vestigial.
It requires manually altering the `htdigest` file (not stored in this
repo) to change the digest realm from `wiki` to `monitoring`, and will
re-prompt users for their passwords if the browsers currently store
them.
Drop the change to move `/tmp` onto the local disk. Doing this move
confuses `resolved` until there is a restart, and has no clear
benefits. The change came in during bf82fadc95, but does not describe
the reasoning; it is particularly puzzling, since postgresql stores
its temporary files under `$PGDATA/base/pgsql_tmp`.
Do not RAID the disks together. This was previously done when they
were spinning media, for reliability; running them on an SSD obviates
this sufficiently. This means that updating the initramfs is also not
necessary.
This no longer has any rules specific to it. We leave the `postgres`
munin group (which now only contains `postgres_appdb`) as
future-proofing, and so that `postgres_appdb` matches to the puppet
manifest of the same name.
This allows straight-forward configuration of realm-based Tornado
sharding through simply editing /etc/zulip/zulip.conf to configure
shards and running scripts/refresh-sharding-and-restart.
Co-Author-By: Mateusz Mandera <mateusz.mandera@zulip.com>
memcached 1.5.22 in Ubuntu 20.04 has a bug where it looks for its SASL
configuration at /etc/sasl2/memcached.conf/memcached.conf instead of
/etc/sasl2/memcached.conf.
https://bugs.launchpad.net/ubuntu/+source/memcached/+bug/1878721
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Using the `host` virtual package confused Puppet into reporting it was
doing work every time one did a puppet run, resulting in unnecessarily
spammy output.
While this functionality to post slow queries to a Zulip stream was
very useful in the early days of Zulip, when there were only a few
hundred accounts, it's long since been useless since (1) the total
request volume on larger Zulip servers run by Zulip developers, and
(2) other server operators don't want real-time notifications of slow
backend queries. The right structure for this is just a log file.
We get rid of the queue and replace it with a "zulip.slow_queries"
logger, which will still log to /var/log/zulip/slow_queries.log for
ease of access to this information and propagate to the other logging
handlers. Reducing the amount of queues is good for lowering zulip's
memory footprint and restart performance, since we run at least one
dedicated queue worker process for each one in most configurations.
Our priority hierarchy is:
(1) Tornado and base services like memcached, redis, etc.
(2) Django and message sender queue workers.
(3) Everything else.
Ideally, we'd have something a bit more fine-grained (e.g. some queue
workers are potentially in the sending path, while others aren't), but
this should have a big impact on ensuring Tornado gets the resources
it needs during load spikes.
I think this has a good chance of causing some load spikes that would
previously have resulted in a user-facing delivery delays no longer
having any significant user-facing impact.
Currently when the user uploads files with ".jpe" file extension, the
markdown is converted to link but the image is not embedded.
This commit adds the support for ".jpe" file extension.
Fixes#14863
We could anchor the regexes, but there’s no need for the power (and
responsibility) of regexes here.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This PR updates the puppet manifest to allow /etc/zulip to be a symlink. The current behaviour overwrites /etc/zulip if it is link to another directory, which is problematic with docker-zulip and
in particular the `LINK_SETTINGS_TO_DATA` setting.
Generated by `pyupgrade --py3-plus --keep-percent-format` on all our
Python code except `zthumbor` and `zulip-ec2-configure-interfaces`,
followed by manual indentation fixes.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
The nginx ‘add_header’ directive doesn’t inherit the way you’d
want (https://trac.nginx.org/nginx/ticket/854), so we need to manually
simulate inheritance using ‘include’, like we previously did with
api_headers.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
isort 5 knows not to reorder imports across function calls, so this
will stop isort from breaking our code.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Puppet doesn’t re-run an exec blocks that’s declared as creating an
existing file, even if it’s notified. Remove the creates declaration.
Fixes#13730.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
"Zulip Voyager" was a name invented during the Hack Week to open
source Zulip for what a single-system Zulip server might be called, as
a Star Trek pun on the code it was based on, "Zulip Enterprise".
At the time, we just needed a name quickly, but it was never a good
name, just a placeholder. This removes that placeholder name from
much of the codebase. A bit more work will be required to transition
the `zulip::voyager` Puppet class, as that has some migration work
involved.
This legacy cross-realm bot hasn't been used in several years, as far
as I know. If we wanted to re-introduce it, I'd want to implement it
as an embedded bot using those common APIs, rather than the totally
custom hacky code used for it that involves unnecessary queue workers
and similar details.
Fixes#13533.
Zulip has had a small use of WebSockets (specifically, for the code
path of sending messages, via the webapp only) since ~2013. We
originally added this use of WebSockets in the hope that the latency
benefits of doing so would allow us to avoid implementing a markdown
local echo; they were not. Further, HTTP/2 may have eliminated the
latency difference we hoped to exploit by using WebSockets in any
case.
While we’d originally imagined using WebSockets for other endpoints,
there was never a good justification for moving more components to the
WebSockets system.
This WebSockets code path had a lot of downsides/complexity,
including:
* The messy hack involving constructing an emulated request object to
hook into doing Django requests.
* The `message_senders` queue processor system, which increases RAM
needs and must be provisioned independently from the rest of the
server).
* A duplicate check_send_receive_time Nagios test specific to
WebSockets.
* The requirement for users to have their firewalls/NATs allow
WebSocket connections, and a setting to disable them for networks
where WebSockets don’t work.
* Dependencies on the SockJS family of libraries, which has at times
been poorly maintained, and periodically throws random JavaScript
exceptions in our production environments without a deep enough
traceback to effectively investigate.
* A total of about 1600 lines of our code related to the feature.
* Increased load on the Tornado system, especially around a Zulip
server restart, and especially for large installations like
zulipchat.com, resulting in extra delay before messages can be sent
again.
As detailed in
https://github.com/zulip/zulip/pull/12862#issuecomment-536152397, it
appears that removing WebSockets moderately increases the time it
takes for the `send_message` API query to return from the server, but
does not significantly change the time between when a message is sent
and when it is received by clients. We don’t understand the reason
for that change (suggesting the possibility of a measurement error),
and even if it is a real change, we consider that potential small
latency regression to be acceptable.
If we later want WebSockets, we’ll likely want to just use Django
Channels.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Resolves these warnings from puppet-lint.
puppet-lint| puppet/zulip/manifests/app_frontend_base.pp - WARNING: double quoted string containing no variables on line 14
puppet-lint| puppet/zulip/manifests/app_frontend_base.pp - WARNING: double quoted string containing no variables on line 19
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This has been a spurious alert for a long time.
It's unclear that this check is useful at all, but if it spikes
dramatically above what's normal, there's perhaps still utility in
being alerted.
Since LoopQueueProcessingWorker jobs cannot be monitored by checking
for connected consumers (since they poll, rather than consuming as
events arrive), they can't be monitored with check_consumers. It's
OK, because that monitoring was redundant with monitoring for
potential growth in their queue that we have as well.
Also clean up the block comments for the two other similar queue
procesors.
Now that we're implemented tsearch_extras in pure postgres, we no
longer need a custom extension. This should help us considerably, as
it means we no longer need to ship custom apt packages at all.
Fixes#467.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This commit finishes adding end-to-end support for the install script
on Debian Buster (making it production ready). Some support for this
was already added in prior commits such as
99414e2d96.
We plan to revert the postgres hunks of this once we've built
tsearch_extras for our packagecloud archive.
Fixes#9828.
The issue here was that the '.' character was unescaped and the
regex was not anchored with a terminal '$'. This was detected by
Anders Kaseorg.
Co-authored-by: Anders Kaseorg <anders@zulipchat.com>
`/etc/postfix/virtual` is of `regexp:` type, not `hash:` type, so
running `postmap` on it has no effect; we need to reload Postfix when
it changes.
http://www.postfix.org/DATABASE_README.html#detect
In the interest of forcing a reload now, optimize the regexes by
eliding the unanchored `.*`s at the beginnings and ends.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Introduced by #12966.
puppet/zulip/manifests/base.pp - WARNING: double quoted string containing no variables on line 93
puppet/zulip/manifests/base.pp - WARNING: string containing only a variable on line 93
scanf doesn’t accept a number as input, so uh, add a dummy space
character.
What. You can’t give me a bad language and then complain when I write
bad programs in it.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Fixes this warning:
Warning: The string '8167976' was automatically coerced to the numerical value 8167976 (file: /root/zulip/puppet/zulip/manifests/base.pp, line: 93, column: 19)
Fixes#9682.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Delete trailing newlines from all files, except
tools/ci/success-http-headers.txt and tools/setup/dev-motd, where they
are significant, and static/third, where we want to stay close to
upstream.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Previous cleanups (mostly the removals of Python __future__ imports)
were done in a way that introduced leading newlines. Delete leading
newlines from all files, except static/assets/zulip-emoji/NOTICE,
which is a verbatim copy of the Apache 2.0 license.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
This gives us access to typing_extensions.Deque, which was not added
to typing until 3.5.4.
(PROVISION_VERSION is not bumped because the transitive dependency set
in dev.txt hasn’t changed.)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
As a result of dropping support for trusty, we can remove our old
pattern of putting `if False` before importing the typing module,
which was essential for Python 3.4 support, but not required and maybe
harmful on newer versions.
cron_file_helper
check_rabbitmq_consumers
hash_reqs
check_zephyr_mirror
check_personal_zephyr_mirrors
check_cron_file
zulip_tools
check_postgres_replication_lag
api_test_helpers
purge-old-deployments
setup_venv
node_cache
clean_venv_cache
clean_node_cache
clean_emoji_cache
pg_backup_and_purge
restore-backup
generate_secrets
zulip-ec2-configure-interfaces
diagnose
check_user_zephyr_mirror_liveness
Since 204 responses don’t contain a payload body, Content-Type is
neither required nor encouraged (RFC 7231 §3.1.1.5), and ours was
missing a semicolon to boot; Content-Length is expressly
forbidden (RFC 7230 §3.3.2).
Furthermore, these add_header directives were silencing the CORS
headers set in api_headers, because add_header inheritance doesn’t
work the way you think it does, as was known before commit
5614d51afc.
Fixes: #12902.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Disable TLS 1.0 and TLS 1.1. (We no longer need to support IE8 on
Windows XP.)
Prefer client-selected cipher order. (Now that all enabled ciphers
provide good security, this allows mobile clients lacking AES hardware
acceleration to pick ChaCha20 for better performance.)
Disable session tickets. (Mozilla discourages them based on
https://www.imperialviolet.org/2013/06/27/botchingpfs.html.)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Since we no longer support Ubuntu Trusty, we no longer need this
backwards-compatibility cruft (which we only kept around to avoid
randomizing configuration for existing systems).
This was only used in Ubuntu 14.04 Trusty.
Removing this also finally lets us simplify our security model
discussion of uploaded files.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
One of smtpd_relay_restrictions or smtpd_recipient_restrictions is
required by postfix ≥ 2.10 (see
http://www.postfix.org/SMTPD_ACCESS_README.html).
This is important for using the email mirror on Ubuntu Bionic.
Our priority hierarchy is:
(1) Tornado and base services like memcached, redis, etc.
(2) Django and message sender queue workers.
(3) Everything else.
Ideally, we'd have something a bit more fine-grained (e.g. some queue
workers are potentially in the sending path, while others aren't), but
this should have a big impact on ensuring Tornado gets the resources
it needs during load spikes.
I think this has a good chance of causing some load spikes that would
previously have resulted in a user-facing delivery delays no longer
having any significant user-facing impact.
Previously, if process_fts_updates ended up very far behind
(e.g. 100,000s of messages), it was unable to recover without doing
some very expensive databsae operations to fetch and then delete the
list of message IDs needing updates. This change fixes that issue by
doing the catch-up work in batches.
Also use psql -e (--echo-queries) in scripts that use ‘set -x’, so
errors can be traced to a specific query from the output.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
The commit 87d1809657 changed the time when
digests are sent by 3 hours to account for moving from the US East Coast to the
West Coast, but didn't change the time period exception in the
`check-rabbitmq-queue` script.
Closes#5415
The construction `su postgres -c -- bash -c 'psql …'` didn’t behave the
way it reads, and only worked by accident:
1. `-c --` sets the command to `--`.
2. `bash` sets the first argument to `bash`.
3. `-c 'psql …'` replaces the command with `psql …`.
Thus, `su` ended up executing `<shell> -c 'psql …' bash`, where
`<shell>` is the `postgres` user’s login shell, usually also `bash`,
which then executed 'psql …' and ignored the extra `bash`.
Unconfuse this construction.
Note from tabbott: The old code didn't even work by accident, it was
just broken. The right fix is to move the quoting around properly.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Lengthen the session timeout and enlarge the session cache. Upgrade
Diffie-Hellman parameters from fixed 1024-bit to custom 2048-bit.
Enable OCSP stapling.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Apparently, our testing environment for this configuration was broken
and didn't test the code we thought it did; as a result, a variable
redefinition bug slipped through.
Fixes#11786.
The overall goal of this change is to fix an issue where on Ubuntu
Trusty, we were accidentally overriding the configuration to serve
uploads from disk with the regular expressions for adding access
control headers.
However, while investigating this, it became clear that we could
considerably simplify the mental energy required to understand this
system by making the uploads-route file be unconditionally available
and included from `zulip-include/app` (which means the zulip_ops code
can share behavior here).
We also move the Access-Control-Allow-* headers to a separate include
file, to avoid duplicating it in 5 places. Fixing this duplication
discovered a potential bug in the settings used for Tornado, where
DELETE was not allowed on a route that definitely expects DELETE.
Fixes#11758.
For users putting Zulip behind certain proxies (and potentially some
third-party API clients), buffer sizes can exceed the uwsgi default of
4096. Since we aren't doing such high-throughput APIs that a small
buffer size is valuable, we should just raise this for everyone.
Nowm unless you specify `--fill-cache`, memcached caches will not be
pre-filled after a server restart. This will be helpful when someone
is in a hurry (e.g. if the server is down right now, or if he/she
testing a configuration change in a newly setup server), it's best to
just restart without pre-filling the cache.
Fixes: #10900.
Update the list of ciphers that nginx will use to the current
Mozilla recommended ones.
These are Intermediate compatibility ones suitable for clients
running anything newer than Firefox 1, Chrome 1, IE 7, Opera 5
and Safari 1. Modern compatibility is not suitable as it excludes
Andriod 4 which is still seen on ~1% of traffic.
More info: https://wiki.mozilla.org/Security/Server_Side_TLS
It hasn't been working for years, but more importantly, it spams up
root's mail queue so that one can't find important things in there
(e.g. the fact that the long-term-idle cron job was failing).
This now checks if the user is zulip, and if not, switches to the
zulip user, making it possible to run it as root.
Significantly modified by tabbott to not break existing behavior.
/bin/sh and /usr/bin/env are the only two binaries that NixOS provides
at a fixed path (outside a buildFHSUserEnv sandbox).
This discussion was split from #11004.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
This is a common bug that users might be tempated to introduce.
And also fix two instances of this bug that were present in our
codebase, including an important one in our upgrade code path.
This commit works by vendoring the couple functions we still use from
puppetlabs stdlib (join and range), but removing the rest of the
puppetlabs codebase, and of course cleaning up our linter rules in the
process.
Fixes#7423.
This should be a nice performance improvement for browsers that
support it.
We can't yet enabled this in the Zulip on-premise nginx configuration,
because that still has to support Trusty.
This isn't super required, in that we add these repositories via
`setup-apt-repo` in any case, but the previous code was wrong and
worth fixing in any case.
This fixes a bug where our API routes for uploaded files (where we
need to use a consistent URL between session auth and API auth) were
not properly configured to pass through the API authentication headers
(and otherwise provide REST endpoint settings).
In particular, this prevented the Zulip mobile apps from being able to
access authenticated image files using these URLs.
Apparently, we can use the process group naming style of having dashes
in the names without using the explicit nun_procs feature of
supervisord configuration.
The new configuration is perfectly satisfactory, so there's no real
reason to prefer the old approach.
Previously, this script needed access to Django settings, which in
turn required access to /etc/zulip/zulip-secrets.conf. Since that
isn't world-readable, this meant that this couldn't run as an
unprivileged `nagios` user.
Fix that by just hardcoding the appropriate path under /var/log/.
When using the Python 3 typing style, Python scripts can't import from
typing inside an `if False` (in contrast, one needs to import inside
an `if False` to support the Python 3 syntax without needing
python-typing installed). So this was just incorrectly half-converted
from the Python 2 style to the Python 3 style.
Apparently, `puppet-lint` on Ubuntu trusty throws warnings for certain
quoting patterns that are OK in modern `puppet-lint`. I believe the
old Zulip code was actually correct (i.e. the old `puppet-lint`
implementation was the problem), but it seems worth changing anyway to
suppress the warnings.
We also exclude more of puppet-apt from linting, since it's
third-party code.
This was converted to Python 3 incorrectly, in a way that actually
completely broke the script (the .decode() that this adds is critical,
since 'f' != b'f').
We fix this, and also add an assert that makes the parsing code
safer against future refactors.
We fix "ERROR: safepackage not in autoload module layout" error
which was caused by a defined type "safepackage" definitation
lying in the wrong place. We refactor to create the defined type
according to puppet guidelines. Link below:
https://docs.puppet.com/puppet/2.7/lang_defined_types.html
We fix these by adding ignore statements in a bunch of files
where this error popped up. We target only specific lines using
the ignore statements and not the entire files.
In puppet/zulip_ops/files/postgresql/setup_disks.sh line 15:
array_name=$(mdadm --examine --scan | sed 's/.*name=//')
^-- SC2034: array_name appears unused. Verify use (or export if used externally).
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
In puppet/zulip_ops/files/munin-plugins/rabbitmq_connections line 66:
echo "connections.value $(HOME=$HOME rabbitmqctl list_connections | grep -v "^Listing" | grep -v "done.$" | wc -l)"
^-- SC2126: Consider using grep -c instead of grep|wc -l.
In puppet/zulip_ops/files/munin-plugins/rabbitmq_consumers line 32:
VHOST=${vhost:-"/"}
^-- SC2034: VHOST appears unused. Verify use (or export if used externally).
In puppet/zulip_ops/files/munin-plugins/rabbitmq_messages line 32:
VHOST=${vhost:-"/"}
^-- SC2034: VHOST appears unused. Verify use (or export if used externally).
In puppet/zulip_ops/files/munin-plugins/rabbitmq_messages_unacknowledged line 32:
VHOST=${vhost:-"/"}
^-- SC2034: VHOST appears unused. Verify use (or export if used externally).
In puppet/zulip_ops/files/munin-plugins/rabbitmq_messages_uncommitted line 32:
VHOST=${vhost:-"/"}
^-- SC2034: VHOST appears unused. Verify use (or export if used externally).
In puppet/zulip_ops/files/munin-plugins/rabbitmq_queue_memory line 32:
VHOST=${vhost:-"/"}
^-- SC2034: VHOST appears unused. Verify use (or export if used externally).
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
In puppet/zulip/files/postgresql/env-wal-e line 6:
export AWS_ACCESS_KEY_ID=$(crudini --get "$ZULIP_SECRETS_CONF" secrets s3_backups_key)
^-- SC2155: Declare and assign separately to avoid masking return values.
In puppet/zulip/files/postgresql/env-wal-e line 7:
export AWS_SECRET_ACCESS_KEY=$(crudini --get "$ZULIP_SECRETS_CONF" secrets s3_backups_secret_key)
^-- SC2155: Declare and assign separately to avoid masking return values.
In puppet/zulip/files/postgresql/env-wal-e line 9:
if [ $? -ne 0 ]; then
^-- SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly with $?.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
In puppet/zulip/files/nagios_plugins/zulip_app_frontend/check_email_deliverer_process line 16:
elif [ "$(echo "$STATUS" | egrep '(STOPPED)|(STARTING)|(BACKOFF)|(STOPPING)|(EXITED)|(FATAL)|(UNKNOWN)$')" ]
^-- SC2143: Use egrep -q instead of comparing output with [ -n .. ].
^-- SC2196: egrep is non-standard and deprecated. Use grep -E instead.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
In puppet/zulip/files/nagios_plugins/zulip_app_frontend/check_email_deliverer_backlog line 8:
cd /home/zulip/deployments/current
^-- SC2164: Use 'cd ... || exit' or 'cd ... || return' in case cd fails.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
With this change, all that one needs to do to start using thumbor in
production is to set the `THUMBOR_URL` setting.
Since without THUMBOR_URL enabled, the thumbor service doesn't
actually do anything, this is pretty safe.
As part of our effort to change the data model away from each user
having a single API key, we're eliminating the couple requests that
were made from Django to Tornado (as part of a /register or home
request) where we used the user's API key grabbed from the database
for authentication.
Instead, we use the (already existing) internal_notify_view
authentication mechanism, which uses the SHARED_SECRET setting for
security, for these requests, and just fetch the user object using
get_user_profile_by_id directly.
Tweaked by Yago to include the new /api/v1/events/internal endpoint in
the exempt_patterns list in test_helpers, since it's an endpoint we call
through Tornado. Also added a couple missing return type annotations.
This commits adds the necessary puppet configuration and
installer/upgrade code for installing and managing the thumbor service
in production. This configuration is gated by the 'thumbor.pp'
manifest being enabled (which is not yet the default), and so this
commit should have no effect in a default Zulip production environment
(or in the long term, in any Zulip production server that isn't using
thumbor).
Credit for this effort is shared by @TigorC (who initiated the work on
this project), @joshland (who did a great deal of work on this and got
it working during PyCon 2017) and @adnrs96, who completed the work.
While there are legitimate use cases for embedded Zulip in an iFrame,
they're rare, and it's more important to prevent this category of
attack by default.
Sysadmins can switch this to a whitelist when they want to use frames.
We no longer need or use these, since Zulip installs a pinned version
of node directly with the scripts/setup/install-node tool.
Noticed because in the effort of adding Ubuntu bionic support, we
noticed the package names changed again.
Apparently, our nginx configuration's use of "localhost", combined
with the default in modern Linux of having localhost resolve to both
the IPv4 and IPv6 addresses on a given machine, resulted in `nginx`
load-balancing requests to a given Zulip server between the IPv4 and
IPv6 addresses. This, in turn, resulted in irrelevant 502 errors
problems every few minutes on the /events endpoints for some clients.
Disabling IPv6 on the server resolved the problem, as does simply
spelling localhost as 127.0.0.1 for the `nginx` upstreams that we
declare for proxying to non-Django services on localhost.
Now, one can just set `no_serve_uploads` in `zulip.conf` to prevent
`nginx` from serving locally uploaded files.
This should help simplify the S3 integration setup process.
This option is intended to support situations like a quick Docker
setup where doing HTTPS adds more setup overhead than it's worth.
It's not intended to be used in actual production environments.
This is preferred, since we don't currently have a way to run Django
logic on the postgres hosts with the Docker implementation.
This is a necessary part of removing the need for the docker-zulip
package to patch this file to make Zulip work with Docker.
The main purpose of this change is to make it guaranteed that
`manage.py register_server --rotate-key` can edit the
/etc/zulip/zulip-secrets.conf configuration via crudini.
But it also adds value by ensuring zulip-secrets.conf is not readable
by other users.
With modern apt-key, the fingerprints are displayed in the more fully
written-out format with spaces, and so `apt-key add` was being run
every time.
This fixes some unnecessary work being done on each puppet run on
Debian stretch.
I would have preferred to not need to do this by upgrading to
upstream, but see #7423 for notes on why that isn't going to work
(basically they broke support for puppet older than 4).
Apparently, these confused the puppet template parser, since they are
somewhat similar to its syntax, resulting in errors trying to use
these templates. It's easy enough to just remove the example
content from the base postgres config file.
We can't really do this in the zulip manifests (since it's sorta a
sysadmin policy decision), but these scripts can cause significant
load when Nagios logs into a server (because many of them take 50ms or
more of work to run). So we just get rid of them.
It seems unlikely we're going to add support for additional older
Debian-based distributions, so it makes sense to just use an else
statement. This should save a bit of busywork every time we add a new
distro.
Mostly, this involves adding the big block at the bottom and making
10 a variable so that it's easier to compare different versions of
these.
I did an audit of the configuration changes between 9.6 and 10, so
this should be fine, but it hasn't been tested yet.
Our recent addition of Content-Security-Policy to the file uploads
backend broke in-browser previews of PDFs.
The content-types change in the last commit fixed loading PDFs for
most users; but the result was ugly, because e.g. Chrome would put the
PDF previewer into a frame (so there were 2 left scrollbars).
There were two changes needed to fix this:
* Loading the style to use the plugin. We corrected this by adding
`style-src 'self' 'unsafe-inline';`
* Loading the plugin. Our CSP blocked loading the PDf viewer plugin.
To correct this, we add object-src 'self', and then limit the
plugin-type to just the one for application/pdf.
We verified this new CSP using https://csp-evaluator.withgoogle.com/
in addition to manual testing.
Previously, user-uploaded PDF files were not properly rendered by
browsers with the local uploads backend, because we weren't setting
the correct content-type.
This adds a basic Content-Security-Policy for user-uploaded avatars
served by the LOCAL_UPLOADS backend.
I think this is for now an unnecessary follow-up to
d608a9d315, but is worth doing because
we may later change what can be uploaded in the avatars directory.
This adds a basic Content-Security-Policy for user-uploaded files with local uploads.
While over time, we plan to add CSP for the main site as well, this CSP is particularly
important for the local-uploads backend, which often shares a domain with the main site.
Running this on additional machines would be redundant; additionally,
the FillState checker cron job runs only on cron systems, so this will
crash on other app frontends.
While this is a different system than I'd written up in #8004, I think
this is a better solution to the general problem of cron jobs to run
on just one server.
Fixes#8004.
Revert c8f034e9a "queue: Remove missedmessage_email_senders code."
As the comment in the code says, it ensures a smooth upgrade path
from 1.7.x; we can delete it in master after 1.8.0 is released.
The removal commit was merged early due to a communication failure.
From here on we start to authenticate uploaded file request before
serving this files in production. This involves allowing NGINX to
pass on these file requests to Django for authentication and then
serve these files by making use on internal redirect requests having
x-accel-redirect field. The redirection on requests and loading
of x-accel-redirect param is handled by django-sendfile.
NOTE: This commit starts to authenticate these requests for Zulip
servers running platforms either Ubuntu Xenial (16.04) or above.
Fixes: #320 and #291 partially.
This should make it possible to use the zulip_ops base rules
successfully on chat.zulip.org. Many of the changes in this commit
are hacks and probably can be cleaned up later, but given that we plan
to drop trusty support soon, it's likely that most of them will simply
be deleted then.
We've been running this change on zulipchat.com for a couple of months
now. Before then, we used to regularly get exceptions like this:
File "./zerver/views/messages.py", line 749, in get_messages_backend
setter=stringify_message_dict)
File "./zerver/lib/cache.py", line 275, in generic_bulk_cached_fetch
cache_set_many(items_for_remote_cache)
File "./zerver/lib/cache.py", line 215, in cache_set_many
get_cache_backend(cache_name).set_many(items, timeout=timeout)
File "/home/zulip/deployments/2017-09-28-21-04-12/zulip-py3-venv/lib/python3.5/site-packages/django/core/cache/backends/memcached.py", line 150, in set_many
self._cache.set_multi(safe_data, self.get_backend_timeout(timeout))
pylibmc.Error: error 48 from memcached_set_multi
This error means memcached was unable to find space for the new value.
You might think that because memcached provides an LRU cache, this
shouldn't happen because it would just evict something... but in fact
* memcached splits its data into "slabs" by object size, and
* until recently, once a 1MiB "chunk" is allocated to a given "slab"
i.e. size class, it wouldn't be reclaimed to allocate to another.
So once the cache has been filled up with objects of some distribution
of sizes, if some objects come in that would go in a different size
class, we have no chunks for that size class / slab, and can't get one.
And that's exactly what was happening on zulipchat.com.
Useful background can be found in
https://github.com/memcached/memcached/wiki/ServerMaint#slab-imbalancehttps://github.com/memcached/memcached/wiki/ReleaseNotes1411https://github.com/memcached/memcached/wiki/ReleaseNotes1425https://github.com/memcached/memcached/wiki/ReleaseNotes150
We're already running v1.4.25, which provides an "automover" that should
be well equipped to fix this; v1.5.0 turns it on by default.
With this commit, adopt the "modern start line" recommended in the
release notes for our v1.4.25, including turning on the automover.
This doesn't yet pass all Nagios checks correctly, and still has a few
flaws:
* The ideal setup code for the `nagios` user in the database isn't included.
* Some of the other details are a bit off; we need to split some host roles.
But it's better than nothing, and we can iterate from here.
This commit just copies all the code from MissedMessageSendingWorker
class to a new EmailSendingWorker class. All the logic to send an email
through a queue was already there. This commit only makes the logic
generic. It does so by creating a special purpose queue called
'email_senders' to send any type of email. To make
MissedMessageSendingWorker still work we derive it from
EmailSendingWorker. All the tests that were testing
MissedMessageSendingWorker now run against EmailSendingWorker.
This fixes a bug where, when a user is unsubscribed from a stream,
they might have unread messages on that stream leak. While it might
seem to be a minor problem, it can cause significant problems for
computing the `unread_msgs` data structures, since it means we need to
add an extra filter for whether the user is still subscribed, either
in the backend or in the UI.
Fixes#7095.
This causes the cron job to run only when a Zulip-managed certbot
install is actually set up.
Inside `install`, zulip.conf doesn't yet exist when we run
setup-certbot, so we write the setting later. But we also give
setup-certbot the ability to write the setting itself, so that we
can recommend it in instructions for adopting certbot in an
existing Zulip installation.
If we were making an old-fashioned webroot where hand-written static
HTML files went, somewhere under `/srv` would be most appropriate.
Here, this webroot is really more of an implementation detail of the
certbot set up by the Zulip installer/packaging, containing transient
state. So someplace under `/var` is appropriate, and specifically
under `/var/lib/zulip` in order to properly namespace it.
For background on `/var/www` and friends, see the top couple of answers
on
https://unix.stackexchange.com/questions/47436/why-web-server-var-www
For some reason, we have the USING_PGROONGA setting on in development
right now. I'm going to disable that in another commit to match what
we're doing in production, but we'll still want that setting to work
in development.
The problem here was that process_fts_updates only attempted to read
the USING_PGROONGA setting from a /etc/zulip/zulip.conf source, and
thus would just not be updating the index in development.
We weren't compressing SVG, while at the same time were incorrectly
compressing octet-stream (Which meant downloading .tar.gz files in
Chrome would get double-compressed).
Sparkle was the auto-update system used by the legacy desktop app. We
haven't been capable of using it for auto-update in years, so there's
no reason to keep around the configuration.
The new Electron app uses a different system anyway.
Whatever dist/ functionality this had in 2014 is now served by
zulip.org, and since this serves as a sample, it should be as simple
as possible.
Previously, this was more cluttered than it needed to be.
The old limits were such that these would sometimes oscillated too
high and page erroneously. The purpose of this check is to prevent
large memory leaks, and will still achieve that with a higher limit.
This allows the Nagios user to access redis without having full access
to the redis system. Ideally, this would eventually use a password
that only has statistics read access, but I'm not sure redis supports
that.
This old puppet configuration was never really used, and regardless
hardcoded an ancient zulip.net hostname. We fix this to use the
zulipconf system to get the host domain (though not, at present, the
hostname).
If a machine is configured with no swap intentationally, that
shouldn't be a Nagios problem. This alert is intended to flag
machines which are swapping.
Arguably, we should make this a symlink, but it's probably a good idea
to have every change in the production Nagios configuration go through
the zulip-puppet-apply diff experience.
Since we've found that it's fairly frequent that we want to recommend
to developers that they upgrade to a version of Zulip from Git, it
makes sense to include that by default.
It's needed by scripts/install-yarn.sh. This hadn't been discovered
because most systems end up having curl installed even though it isn't
technically a required package.
Alex Vandiver
Anders Kaseorg
Casper Kvan Clausen
Tim Abbott
Mateusz Mandera
rht
Alex Vandiver
Anders Kaseorg
arpit551
Tim Abbott
Mateusz Mandera
shubhamgupta2956
Aman Agrawal
pemontto
Vishnu KS
Stefan Weil
Hemanth V. Alluri
Wyatt Hoodes
Fabian Stanke
Puneeth Chaganti
Anders Kaseorg
Harshit Bansal
Tom Daff
Fabian Tribrunner
Abhilash Verma
Aditya Bansal
Joshua Schmidlkofer
Sampriti Panda
Jason Michalski
Ghislain Antony Vaillant
neiljp (Neil Pilgrim)
Greg Price
Umair Khan
Rishi Gupta
Tim Abbott
Alexander Trost
hollywoodno