In Debian, becoming root as `su` does not alter the `$PATH`; this can
lead to the root user not having `/usr/sbin` in its path, and thus
the `useradd zulip` step of the installer fails.
Fixes#17441.
This commit removes redundant yarn cache by removing the old
version directories, i.e. All the directory under `~/.cache/yarn`
except `~/.cache/yarn/v6` (current version directory).
Fixes#15964.
The path which contains all of the Zulip supervisor files changed in
3ab9b31d2f to make it easier to purge
now-unwanted supervisor configuration files. However, the paths that
the zulip upgrade process, and restart-server, look at were not
adjusted.
Fix the supervisor configuration file paths.
3314fefaec started needing `python3-yaml`, but incorrectly claimed
that it was always an indirect dependency; it is a dependency of
`ubuntu-minimal` on 20.04, but not required on 18.04 or Debian. We
cannot install it in puppet because then is definitionally too late;
it is needed at load time by `zulip-puppet-apply`.
Install `python3-yaml`, but guarded by a simple check so as to not
further slow most installs.
Fixes#18179.
The stacktraces here are seldom useful -- for the calls to
upgrade-stage-2, we know precisely what was run. For the `run`
wrapper, the output contains the command that failed, which is
sufficient to identify where in the upgrade process it was. Showing
more stacktrace below the actual error merely confuses users and
scrolls the real error off of the screen.
For installs which use the `upgrade-zulip-from-git` process, the
deployment directory is a git checkout. This means that an
administrator can, as an emergency tool, run `git revert` and similar
commands -- assuming there is a `~/.gitconfig` set up for the zulip
user.
Add commands to `scripts/lib/install` to create a `~/.gitconfig` file
at installation time. The `user.name` and `user.email` fields are set
to the hostname and passed-in `--email` value, respectively.
Fixes#18039.
0663b23d54 changed zulip-puppet-apply to
use the venv, because it began using `yaml` to parse the output of
puppet to determine if changes would happen.
However, not every install ends with a venv; notably, non-frontend
servers do not have one. Attempting to run zulip-puppet-apply on them
hence now fails.
Remove this dependency on the venv, by installing a system
python3-yaml package -- though in reality, this package is already an
indirect dependency of the system. Especially since pyyaml is quite
stable, we're not using it in any interesting way, and it does not
actually add to the dependencies, it is preferable to parsing the YAML
by hand in this instance.
When exception is raised inside an exception handler, Python 3
helpfully prints both tracebacks separated by “During handling of the
above exception, another exception occurred:”. But when we’re using
an exception handler to retry the same operation, multiple tracebacks
are just noise. Suppress the earlier one using PEP 409 syntax.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This means that in steady-state, `zulip-puppet-apply` is expected to
produce no changes or commands to execute. The verification step of
`setup-apt-repo` is quite fast, so this cleans up the output for very
little cost.
The class names need to be renamed even if we are not about to run
puppet ourselves; otherwise, deployments which rely on running puppet
themselves will still have the wrong class names.
These are respected by `urllib`, and thus also `requests`. We set
`HTTP_proxy`, not `HTTP_PROXY`, because the latter is ignored in
situations which might be running under CGI -- in such cases it may be
coming from the `Proxy:` header in the request.
Using `config_file.write()` only writes out what python stored of the
file; as such, it strips all comments and whitespace.
Use `crudini --set`, which only modifies the line whose contents are
changed.
There is only one PostgreSQL database; the "appdb" is irrelevant.
Also use "postgresql," as it is the name of the software, whereas
"postgres" the name of the binary and colloquial name. This is minor
cleanup, but enabled by the other renames in the previous commit.
The "voyager" name is non-intuitive and not significant.
`zulip::voyager` and `zulip::dockervoyager` stubs are kept for
back-compatibility with existing `zulip.conf` files.
This moves the puppet configuration closer to the "roles and profiles
method"[1] which is suggested for organizing puppet classes. Notably,
here it makes clear which classes are meant to be able to stand alone
as deployments.
Shims are left behind at the previous names, for compatibility with
existing `zulip.conf` files when upgrading.
[1] https://puppet.com/docs/pe/2019.8/the_roles_and_profiles_method
Fingerprinting the config is somewhat brittle -- it requires either
custom bootstrapping for old (fingerprint-less) configs, and may have
false-positives.
Since generating the config is lightweight, do so into the .tmp files,
and compare the output to the originals to determine if there are
changes to apply.
In order to both surface errors, as well as notify the user in case a
restart is necessary, we must run it twice. The `onlyif`
functionality cannot show configuration errors to the user, only
determine if the command runs or not. We thus run the command once,
judging errors as "interesting" enough to run the actual command,
whose failure will be verbose in Puppet and halt any steps that depend
on it.
Removing the `onlyif` would result in `stage_updated_sharding` showing
up in the output of every Puppet run, which obscures the important
messages it displays when an update to sharding is necessary.
Removing the `command` (e.g. making it an `echo`) would result in
removing the ability to report configuration errors. We thus have no
choice but to run it twice; this is thankfully low-overhead.
The reason higher expected_time_to_clear_backlog were allowed for queues
during "bursts" was, in simpler terms, because those queues to which
this happens, intrinsically have a higher acceptable "time until cleared"
for new events. E.g. digests_email, where it's completely fine to take a
long time to send them out after putting in the queue. And that's
already configurable without a normal/burst distinction.
Thanks to this we can remove a bunch of overly complicated, and
ultimately useless, logic.
The race condition is described in the comment block removed by this
commit. This leaves room for another, remaining race condition
that should be virtually impossible, but nevertheless it seems
worthwhile to have it documented in the code, so we put a new comment
describing it.
As a final note, this is not a new race condition,
it was hypothetically possible with the old code as well.
We can compute the intended number of processes from the sharding
configuration. In doing so, also validate that all of the ports are
contiguous.
This removes a discrepancy between `scripts/lib/sharding.py` and other
parts of the codebase about if merely having a `[tornado_sharding]`
section is sufficient to enable sharding. Having behaviour which
changes merely based on if an empty section exists is surprising.
This does require that a (presumably empty) `9800` configuration line
exist, but making that default explicit is useful.
After this commit, configuring sharding can be done by adding to
`zulip.conf`:
```
[tornado_sharding]
9800 = # default
9801 = other_realm
```
Followed by running `./scripts/refresh-sharding-and-restart`.
This supports running puppet to pick up new sharding changes, which
will warn of the need to finalize them via
`refresh-sharding-and-restart`, or simply running that directly.
The value in the stats file can get outdated if the queue hasn't done
enough iterations to update the stats file for a while. The queue size
output by rabbitmqctl list_queues is more up to date, and empirically
tends to agree with the value in the stats file (when the stats file is
fresh).
This will let PyYAML link against LibYAML when PyYAML is next
installed. Due to virtualenv-clone, that won’t happen until the next
Python package removal anyway, so we don’t bother bumping
PROVISION_VERSION.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The combination of `--force --noop` is potentially confusing, but
currently `--noop` makes no sense without `--force`, as it will prompt
and then not make changes.
Make `--noop` skip the prompt as well.
Fixes#12868.
We now also include python version in the format
'major.minor.patchlevel', when generating hash for a
requirement file. This was necessary since packages tend to
break on different versions of python, so it is important to
track the version on which the venv was setup.
WARN: This commit will force all zulip venvs to be recreated.
We were already using packages names along with their versions
to generate hash for the requirement file, as we were passing
the `.txt` files to the hash_reqs file instead of intended `.in` files
for which the functions in this file was originially designed.
Changed the expand_reqs_helper function to adapt for the `.txt` files.
Although mktemp is deprecated due to security issues, this is not a
security issue.
The security problems with mktemp happen when you open the resulting
filename (without O_EXCL) in a publicly writable directory, because
then someone else might have predicted the filename and created or
symlinked or hardlinked something there between the mktemp and the
open, causing you to write to a file you didn’t expect.
Here we don’t open the resulting filename, we symlink to it. symlink
will refuse to clobber an existing file, and we handle the error that
arises from this case. This is the normal way to atomically create a
symlink.
We should still replace mktemp because it’s deprecated, but we can’t
replace it with a function that creates the temporary file. Instead
we build a random filename ourselves.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Otherwise, the useradd command will fail during the DigitalOcean
1-Click App installation because the install script is called
twice during the whole process. Plus the Zulip install script
is designed to be idempotent and this bug compromises that.
The value is a holdover from when it controlled runtime behavior,
which it no longer does.
Stop taking a DEPLOYMENT_TYPE, which is unused; the python code only
care about if the option exists, not its value.
These are more correct to the sense of "is this a service we
configured for Zulip", and removes potential confusion around the 0/1
values being backwards from how binary is usually interpreted.
Alex Vandiver
Robert Imschweiler
Riken Shah
Siddharth Asthana
Gaurav Pandey
Anders Kaseorg
Ganesh Pawar
Sutou Kouhei
Tim Abbott
Mateusz Mandera
Aman
Aman Agrawal
Vishnu KS