If a user chooses to not broadcast their presence status to others, we
still show the user as available in their own user sidebar. Instead, one's
own availability should appear the same as it does for other users.
With tweaks from YashRE42: rebasing to use user_settings instead of
page_params, as introduced in the series of commits ending with
8755a76cf6, adding code comments and
moving the redraw call to `server_events_dispatch.js`.
Fixes part of #18846. Further work is required to display the user's own idle
status properly to complete #18846.
Co-authored-by: YashRE42 <33805964+YashRE42@users.noreply.github.com>
Co-authored-by: Ganeshprasad Biradar <biradarganesh25@gmail.com>
Since this is currently only useful to interpret presence data, we
send this only if presence is requested.
I'm not sure that server_timestamp is the right name for this field,
but ultimately it should match the main presence API format.
Use fully resolvable request paths because we need to be able to refer
to third party modules, and to increase uniformity and explicitness.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
I considered using set_info({}, 0) to clear data,
but it has a lot of machinery that could lead
to accidental line coverage and/or extra test
complexity.
This is a deceptively ugly diff. It makes
the actual code way more tidy.
I basically inlined some calls to mock_module
and put some statements in lexical order.
We now just use a module._load hook to inject
stubs into our code.
For conversion purposes I temporarily maintain
the API of rewiremock, apart from the enable/disable
pieces, but I will make a better wrapper in an
upcoming commit.
We can detect when rewiremock is called after
zrequire now, and I fix all the violations in
this commit, mostly by using override.
We can also detect when a mock is needlessly
created, and I fix all the violations in this
commit.
The one minor nuisance that this commit introduces
is that you can only stub out modules in the Zulip
source tree, which is now static/js. This should
not really be a problem--there are usually better
techniques to deal with third party depenencies.
In the prior commit I show a typical workaround,
which is to create a one-line wrapper in your
test code. It's often the case that you can simply
use override(), as well.
In passing I kill off `reset_modules`, and I
eliminated the second argument to zrequire,
which dates back to pre-es6 days.
We still need to write to these globals with set_global because the
code being tested reads from them, but the tests themselves should
never need to read from them.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
ES and TypeScript modules are strict by default and don’t need this
directive. ESLint will remind us to add it to new CommonJS files and
remove it from ES and TypeScript modules.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Prettier would do this anyway, but it’s separated out for a more
reviewable diff. Generated by ESLint.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Restored old behavior accidentally removed in
1ae07b93d8 (diff-e353fab8bea58b8746ec68c83aa39b36L48)
The server only remembers the most recent presence status update per
device. Meaning that, for instance, if the user only uses one client and
that client's last status update was IDLE, then the server only knows
that, doesn't know anything about the user's last ACTIVE time. Thus the
"active_timestamp" the server will serve about this user to the webapp
will be "undefined".
The old behavior was that for the sake of the "Last active: x ago"
status in buddy list popover, the latest status timestamp was used,
whether IDLE or ACTIVE.
The change linked about changed that to only pay attention to
ACTIVE. Thus, if the server doesn't remember any ACTIVE statuses, webapp
would show "Last active: More than 2 weeks ago", which was incorrect.
We restore the old behavior and further improvements can be made on top
of this.
This changes the payload that is used
to populate `page_params` for the webapp,
as well as responses to the once-every-50-seconds
presence pings.
Now our dictionary of users only has these
two fields in the value:
- activity_timestamp
- idle_timestamp
Example data:
{
6: Object { idle_timestamp: 1585746028 },
7: Object { active_timestamp: 1585745774 },
8: Object { active_timestamp: 1585745578,
idle_timestamp: 1585745400}
}
We only send the slimmer type of payload
to clients that have set `slim_presence`
to True.
Note that this commit does not change the format
of the event data, which still looks like this:
{
website: {
client: 'website',
pushable: false,
status: 'active',
timestamp: 1585745225
}
}
We had this API:
people.add_in_realm = full-fledged user
people.add = not necessarily in realm
Now the API is this:
people.add = full-fledged user
people._add_user = internal API for cross-realm bots
and deactivated users
I think in most of our tests the distinction between
people.add() and people.add_in_realm() was just an
accident of history and didn't reflect any real intention.
And if I had to guess the intention in 99% of the cases,
folks probably thought they were just creating ordinary,
active users in the current realm.
In places where the distinction was obviously important
(because a test failed), I deactivated the user via
`people.deactivate`.
For the 'basics' test in the people test suite, I clean
up the test setup for Isaac. Before this commit I was
adding him first as a non-realm user then as a full-fledged
user, but this was contrived and confusing, and we
didn't really need it for test coverage purposes.
Before this commit, presence used get_realm_count()
to determine whether a realm was "small" (and thus
should show all human users in the buddy list, even
humans that had not been active in a while).
The `get_realm_count` function--despite a very wrong,
misleading comment--was including bots in its count.
The new function truly counts only active humans
(and no bots).
Because we were overcounting users before this change,
we should technically adjust `BIG_REALM_COUNT` down
by some amount to reflect our original intention there
on the parameter. I'm leaving it alone for now, though,
since we've improved the performance of the buddy list
over time, and it's probably fine if a few "big" realms
get re-classified as small realms (and show more users)
by virtue of this change.
(Also note that this cutoff value only affects the
"normal" view of the buddy list; both small realms
and large realms will show long-inactive users if you
do searches.)
Fixes#14215
This cleans up the handoff of page_params
data between ui_init and modules that
take over ownership of page_params-derived
data.
Read the long comment in ui_init for a bit
more context.
Most of this diff is actually test cleanup.
And a lot of the diff to "real" code is
just glorified `s/page_params/params/`
in the `initialize` functions.
One little oddity is that we don't actually
surrender ownership of `page_params.user_id`
to `people.js`. We could plausibly sweep
the rest of the codebase to just use
`people.my_user_id()` consistently, but it's
not a super high priority thing to fix,
since the value never changes.
The stream_data situation is a bit messy,
since we consume `page_params` data in the
initialize() function in addition to the
`params` data we "own". I added a comment
there and intend to follow up. I tried
to mostly avoid the "word soup" by extracting
three locals at the top.
Finally, I don't touch `alert_words` yet,
despite it also doing the delete-page-params-data
dance. The problem is that `alert_words`
doesn't have a proper `initialize()`. We
should clean that up and have it use a
`Map` internally, too.
In the next commit we're going to change what the
server sends for the following:
- page_params
- server responses to /json/users/me/presence
We will **not** yet be changing the format of the data
that we get in events when users update their presence.
It's also just a bit in flux what our final formats
will be for various presence payloads, and different
optimizations may lead us to use different data
structures in different payloads.
So for now we decouple these two things:
raw_info: this is intended to represent a
snapshot of the latest data from the
server, including some data like
timestamps that are only used
in downstream calculations and not
user-facing
exports.presence_info: this is calculated
info for modules like buddy_data that
just need to know active vs. idle and
last_active_date
Another change that happens here is we rename
set_info_for_user to update_info_for_event,
which just makes it clear that the function
expects data in the "event" format (as opposed
to the format for page_params or server
responses).
As of now keeping the intermediate raw_info data
around feels slightly awkward, because we just
immediately calculate presence_info for any kind
of update. This may be sorta surprising if you
just skim the code and see the various timeout
constants. You would think we might be automatically
expiring "active" statuses in the client due to
the simple passage of time, but in fact the precise
places we do this are all triggered by new data
from the server and we re-calculate statuses
immediately.
(There are indirect ways that clients
have timing logic, since they ask the
server for new data at various intervals, but a
smarter client could simply expire users on its
own, or at least with a more efficient transfer
of info between it and the server. One of
the thing that complicates client-side logic
is that server and client clocks may be out
of sync. Also, it's not inherently super expensive
to get updates from the server.)
We had a plan at some point to use this to display a phone icon or
something for users who would receive push notifications if you
messaged them. IT's not clear that feature was a good idea in any
case, but it certainly shouldn't be synced as presence data; it would
change >100x less often than the rest of presence and so should likely
be synced differently, maybe as a property on user. So it's best to
delete this prototype.
This flag affects page_params and the
payload you get back from POSTs to this
url:
users/me/presence
The flag does not yet affect the
presence events that get sent to a
client.
This commit was originally automatically generated using `tools/lint
--only=eslint --fix`. It was then modified by tabbott to contain only
changes to a set of files that are unlikely to result in significant
merge conflicts with any open pull request, excluding about 20 files.
His plan is to merge the remaining changes with more precise care,
potentially involving merging parts of conflicting pull requests
before running the `eslint --fix` operation.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Steve Howell
Anders Kaseorg
Yash Rathore
Riken Shah
Tim Abbott
Priyank Patel
Mateusz Mandera
clarammdantas
Rohitt Vashishtha
Steve Howell
Anders Kaseorg