Failing to remove all of the rules which were added causes action at a
distance with other tests. The two methods were also only used by
test code, making their existence in zerver.lib.rate_limiter clearly
misplaced.
This fixes one instance of a mis-balanced add/remove, which caused
tests to start failing if run non-parallel and one more anonymous
request was added within a rate-limit-enabled block.
The user group depedency graph should always be a DAG.
This commit adds code to make sure we keep the graph DAG
while adding subgroups to a user group.
Fixes#25913.
We want to make sure that the system groups, once created, will always
have the GroupGroupMemberships fully set up.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Note that we use the DjangoJSONEncoder so that we have builtin support
for parsing Decimal and datetime.
During this intermediate state, the migration that creates
extra_data_json field has been run. We prepare for running the backfilling
migration that populates extra_data_json from extra_data.
This change implements double-write, which is important to keep the
state of extra data consistent. For most extra_data usage, this is
handled by the overriden `save` method on `AbstractRealmAuditLog`, where
we either generates extra_data_json using orjson.loads or
ast.literal_eval.
While backfilling ensures that old realm audit log entries have
extra_data_json populated, double-write ensures that any new entries
generated will also have extra_data_json set. So that we can then safely
rename extra_data_json to extra_data while ensuring the non-nullable
invariant.
For completeness, we additionally set RealmAuditLog.NEW_VALUE for
the USER_FULL_NAME_CHANGED event. This cannot be handled with the
overridden `save`.
This addresses: https://github.com/zulip/zulip/pull/23116#discussion_r1040277795
Note that extra_data_json at this point is not used yet. So the test
cases do not need to switch to testing extra_data_json. This is later
done after we rename extra_data_json to extra_data.
Double-write for the remote server audit logs is special, because we only
get the dumped bytes from an external source. Luckily, none of the
payload carries extra_data that is not generated using orjson.dumps for
audit logs of event types in SYNC_BILLING_EVENTS. This can be verified
by looking at:
`git grep -A 6 -E "event_type=.*(USER_CREATED|USER_ACTIVATED|USER_DEACTIVATED|USER_REACTIVATED|USER_ROLE_CHANGED|REALM_DEACTIVATED|REALM_REACTIVATED)"`
Therefore, we just need to populate extra_data_json doing an
orjson.loads call after a None-check.
Co-authored-by: Zixuan James Li <p359101898@gmail.com>
This in-progress feature was started in 2018 and hasn't
been worked on much since. It's already in a broken state,
which makes it hard to iterate on the existing search bar
since it's hard to know how those changes will affect search
pills.
We do still want to add search pills eventually, and when
we work on that, we can refer to this diff to readd the
changes back.
An implicit coercion from an untyped dict to the TypedDict was hiding
a type error: CapturedQuery.sql was really str, not bytes. We should
always prefer dataclass over TypedDict to prevent such errors.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Twitter removed their v1 API. We take care to keep the existing cached
results around for now, and to not poison that cache, since we might
be able replace this with something that can still use the existing
cache.
This commit removes realm_community_topic_editing_limit_seconds
field from register response since topic edit limit is now
controlled by move_messages_within_streams_limit_seconds
setting.
We also remove DEFAULT_COMMUNITY_TOPIC_EDITING_LIMIT_SECONDS
constant since it is no longer used.
This prevents `get_user_profile_by_api_key` from doing a sequential
scan.
Doing this requires moving the generation of initial api_key values
into the column definition, so that even bare calls to
`UserProfile.objects.create` (e.g. from tests) call appropriately
generate a random initial value.
Deleting a message can race with sending a push notification for it.
b47535d8bb handled the case where the Message row has gone away --
but in such cases, it is also possible for `access_message` to
succeed, but for the save of `user_message.flags` to fail, because the
UserMessage row has been deleted by then.
Take a lock on the Message row over the accesses of, and updates to,
the relevant UserMessage row. This guarantees that the
message's (non-)existence is consistent across that transaction.
Partial fix for #16502.
We now set tos_version to "-1" for imported users and the ones
created using API or using other methods like LDAP, SCIM and
management commands. This value will help us to allow users to
change email address visibility setting during first login.
With the private messages -> direct messages migration, we should
rename the "Starting a new private thread" help center article.
- Renames article to "Starting a new direct message"
- Updates relevant section in /help/getting-started-with-zulip
- Fixes typo in /help/send-group-dm
- Updates file names and adds URL redirect.
Fixes#25506.
Backfill subscription realm audit log SUBSCRIPTION_CREATED events for
users which are currently subscribed but don't have any subscription
events, presumably due to some historical bug. This is important
because those rows are necessary when reactivating a user who is
currently soft-deactivated.
For each stream, we find the subscribed users who have no
subscription-related realm audit log entries, and create a
`backfill=True` subscription audit log entry which is the latest it
could have been, based on UserMessage rows. We then optionally insert
a `DEACTIVATION` if the current subscription is not active.
We were missing a few checks for raw_unread_msgs being present before
trying to parse and update it.
The test only covers 2/3 of the cases, but I wasn't convinced it was
worth adding another test just for the corner case of removing a
message flag; this seems fairly unlikely to regress.
Previously, it seemed possible for the scheduled messages API to try
to send infinite copies of a message if we had the very poor luck of a
persistent failure happening after a message was sent.
The failure_message field supports being able to display what happened
in the scheduled messages modal, though that's not exposed to the API
yet.
The comment was outdated, currently we import UserProfiles before
realm_tables - because some models in realm_tables have a dependency on
UserProfile.
Also makes sense to elaborate a bit more in the comment that it's just
an outline of the ordering, not an exhaustive list.
Fixes#25414.
We add Attachment.scheduled_messages relation to track ScheduledMessages
which reference the attachment.
The import bits can be done after merging this, by updating #25345.
Because education organizations and users have slightly specialized
use cases, we update the Welcome Bot message content sent to new
users and new organization owners for these types of organizations
to link to help center articles/guides geared toward these users
and organizations.
Also, updates the demo organization warning to only go to the new
demo organization owner because the 30 day deletion text is only
definitely accurate when the organization is created.
Fixes#21694.
Updates the objects in the API for scheduled messages so that those
for stream messages return the `to` property as an integer since it
is always the unique stream ID and so that those for direct messages
do not have a `topic` property since direct messages never have a
topic.
Also makes small update so that web app scheduled messages overlay
has the correct stream ID.
This commit places the email CSS into the `style` tag located in the
`head` section. This resolves the issue of being unable to apply
certain CSS styles that cannot be inlined, such as media queries and
pseudo-classes.
In #23380 we want to change all ocurrences of `uri` to `url`. This
commit changes the ocurrences of `uri` appeared in files related to
email, including templates (`.html`, `.txt`) and backend (`.py`)
codes.
In `email.md`, `base_images_uri` is changed to `images_base_url` -
the words `base` and `images` are swapped and plural form is added
for `image`. This is becasue the former is not found anywhere in
the codebase while the later appears a lot. To reduce confusion,
this doccumentation changed accordingly.
This also removes the error in one of these functions that was using a
different constant instead of
PRESENCE_LEGACY_EVENT_OFFSET_FOR_ACTIVITY_SECONDS.
This implements the core of the rewrite described in:
For the backend data model for UserPresence to one that supports much
more efficient queries and is more correct around handling of multiple
clients. The main loss of functionality is that we no longer track
which Client sent presence data (so we will no longer be able to say
using UserPresence "the user was last online on their desktop 15
minutes ago, but was online with their phone 3 minutes ago"). If we
consider that information important for the occasional investigation
query, we have can construct that answer data via UserActivity
already. It's not worth making Presence much more expensive/complex
to support it.
For slim_presence clients, this sends the same data format we sent
before, albeit with less complexity involved in constructing it. Note
that we at present will always send both last_active_time and
last_connected_time; we may revisit that in the future.
This commit doesn't include the finalizing migration, which drops the
UserPresenceOld table.
The way to deploy is to start the backfill migration with the server
down and then start the server *without* the user_presence queue worker,
to let the migration finish without having new data interfering with it.
Once the migration is done, the queue worker can be started, leading to
the presence data catching up to the current state as the queue worker
goes over the queued up events and updating the UserPresence table.
Co-authored-by: Mateusz Mandera <mateusz.mandera@zulip.com>