This is required for unattended upgrades to actually run regularly.
In some distributions, it may be found in 20auto-upgrades, but placing
it here makes it more discoverable.
We haven't actively used this plugin in years, and so it was never
converted from the 2014-era monitoring to detect the hostname.
This seems worth fixing since we may want to migrate this logic to a
more modern monitoring system, and it's helpful to have it correct.
This provides a single reference point for all zulip.conf settings;
these mostly link out to the more complete documentation about each
setting, elsewhere.
Fixes#12490.
There is only one PostgreSQL database; the "appdb" is irrelevant.
Also use "postgresql," as it is the name of the software, whereas
"postgres" the name of the binary and colloquial name. This is minor
cleanup, but enabled by the other renames in the previous commit.
This moves the puppet configuration closer to the "roles and profiles
method"[1] which is suggested for organizing puppet classes. Notably,
here it makes clear which classes are meant to be able to stand alone
as deployments.
Shims are left behind at the previous names, for compatibility with
existing `zulip.conf` files when upgrading.
[1] https://puppet.com/docs/pe/2019.8/the_roles_and_profiles_method
This also removes direct includes of `zulip::common`, making
`zulip::base` gatekeep the inclusion of it. This helps enforce that
any top-level deploy only needs include a single class, and that any
configuration which is not meant to be deployed by itself will not
apply, due to lack of `zulip::common` include.
The following commit will better differentiate these top-level deploys
by moving them into a subdirectory.
Restarting servers is what can cause service interruptions, and
increase risk. Add all of the servers that we use to the list of
ignored packages, and uncomment the default allowed-origins in order
to enable unattended upgrades.
d2aa81858c replaced the `apt::source` to set up debathena with
`Exec['setup-apt-repo-debathena']`, but mistakenly left the
`apt::source` in place in `zmirror` (but not `zmirror_personals`).
The `apt::source` resource type was later removed in c9d54f7854,
making the manifest to apply on `zmirror`.
Remove the broken and unnecessary `apt::source` resource.
This property is not related to the base zulip install; move it to
zulip::postgres_common, which is already used as a namespace for
various postgres variables.
There was likely more dependency complexity prior to 97766102df, but
there is now no reason to require that consumers explicitly include
zulip::apt_repository.
Use https://github.com/stripe/smokescreen to provide a server for an
outgoing proxy, run under supervisor. This will allow centralized
blocking of internal metadata IPs, localhost, and so forth, as well as
providing default request timeouts (10s by default).
We should eventually add templating for the set of hosts here, but
it's worth merging this change to remove the deleted hostname and
replace it with the current one.
Disabled on webservers in 047817b6b0, it has since lingered in
configuration, as well as running (to no effect) every minute on the
loadbalancer.
Remove the vestiges of its configuration.
This banner shows on lb1, advertising itself as lb0. There is no
compelling reason for a custom motd, especially one which needs to
be reconfigured for each host.
Since this was using repead individual get() calls previously, it
could not be monitored for having a consumer. Add it in, by marking
it of queue type "consumer" (the default), and adding Nagios lines for
it.
Also adjust missedmessage_emails to be monitored; it stopped using
LoopQueueProcessingWorker in 5cec566cb9, but was never added back
into the set of monitored consumers.
The rabbitmq cron jobs exist in order to call rabbitmqctl as root and
write the output to files that nagios can consume, since nagios is not
allowed to run rabbitmqctl.
In systems which do not have nagios configured, these every-minute
cron jobs add non-insignificant load, to no effect. Move their
installation into `zulip_ops`. In doing so, also combine the cron.d
files into a single file; this allows us to `ensure => absent` the old
filenames, removing them from existing systems. Leave the resulting
combined cron.d file in `zulip`, since it is still of general utility
and note.
7d4a370a57 attempted to move the replication check to on the
PostgreSQL hosts. While it updated the _check_ to assume it was
running and talking to a local PostgreSQL instance, the configuration
and installation for the check were not updated. As such, the check
ran on the nagios host for each DB host, and produced no output.
Start distributing the check to all apopdb hosts, and configure nagios
to use the SSH tunnel to get there.
wal-g was used in `puppet/zulip` by env-wal-g, but only installed in
`puppet/zulip_ops`.
Merge all of the dependencies of doing backups using wal-g (wal-g
installation, the pg_backup_and_purge job, the nagios plugin that
verifies it happens) into a common base class in `puppet/zulip`, since
it is generally useful.
No plugins are installed inside the /usr/local/munin/lib this creates
in munin-node, nor are they symlinked into /etc/munin/plugins, so
non-default plugins are added by this.
The one complexity is that hosts_fullstack are treated differently, as
they are not currently found in the manual `hosts` list, and as such
do not get munin monitoring.
check_memcached does not support memcached authentication even in its
latest release (it’s in a TODO item comment, and that’s it), and was
never particularly useful.
In Bionic, nagios-plugins-basic is a transitional package which
depends on monitoring-plugins-basic. In Focal, it is a virtual
package, which means that every time puppet runs, it tries to
re-install the nagios-plugins-basic package.
Switch all instances to referring to `$zulip::common::nagios_plugins`,
and repoint that to monitoring-plugins-basic.
Support for Xenial and Stretch was removed (5154ddafca, 0f4b1076ad,
8944e0ad53, 79acd5ae40, 1219a2e854), but not all codepaths were
updated to remove their conditionals on it.
Remove all code predicated on Xenial or Stretch. debathena support
was migrated to Bionic, since that appears to be the current state of
existing debathena servers.
Since 9e8f1aacb3, zulip_ops machines
might have two Package declarations for `certbot`, which doesn't work
in puppet.
The fix is, as usual, to use our `zulip::safepackage` wrapper instead.
The style guide for Zulip is to always use "primary" and "replica"
when describing database replication. Adjust a few comments under
`puppet/` that do not adhere to this.
Unfortunately, some references still remain to the insensitive and
inaccurate "master" / "slave" terminology. However, these are only in
files which we are attempting to preserve as close to the upstream
versions they are derived from (e.g. postgresql.conf,
postfix/master.cf).
65774e1c4f switched from using the bundled check_postgres.pl to using
the version from packages; the file itself remained, however.
Remove it, and clean up references to it.
Fixes#15389.
Instead of SSH'ing around to them, run directly on the database hosts.
This means that the replicas do not know how many bytes behind they
are in _receiving_ the wall logs; thus, the monitoring also extends to
the primary database, which knows that information for each replica.
This also allows for detecting when there are too few active replicas.
Use read-only types (List ↦ Sequence, Dict ↦ Mapping, Set ↦
AbstractSet) to guard against accidental mutation of the default
value.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
All differences between the primary and replica roles having been
merged, fold the `postgres_common`, `postgres_master`, and
`postgres_slave` roles into just `postgres_appdb`.
These values differed between the primary and secondary database
hosts, for unclear reasons. The differences date back to their
introduction in 387f63deaa. As the comment in the replica
confguration notes, settings of `vm.dirty_ratio = 10` and
`vm.dirty_background_ratio = 5` matched the kernel defaults for
"newer" kernels; however, kernel 2.6.30 bumped those to 20 and 10,
respectively[1], as a fix for underlying logic now being more correct.
Remove these overrides; they should at very least be consistent across
roles, and the previous values look to be an attempt to tune for a
very much older version of the Linux kernel, which was using an
different, buggier, algorithm under the hood.
[1] 1b5e62b42b
This file controls streaming replication, and recovery using wal-g on
the secondary. The `primary_conninfo` data needs to change on short
notice when database failover happens, in a way that is not suitable
for being controlled by puppet.
PostgreSQL 12, in fact, removes the use of the `recovery.conf` file[1];
the `primary_conninfo` and `restore_command` information goes into the
main `postgresql.conf` file, and the standby status is controlled by
the presence of absence of an empty `standby.signal` file.
Remove the puppet control of the `recovery.conf` file.
[1] https://pgstef.github.io/2018/11/26/postgresql12_preview_recovery_conf_disappears.html
Since the nagios authentication is stored _in the database_, it is
unnecessary to run if the database is simply a replica of the
production database. The only case in which this statement would have
an effect is if the postgres node contains a _different_ (or empty)
database, which `setup_disks` now effectively prevents.
Remove the unnecessary step.
481613a344 updated the `setup_disks` script to no longer reference
`mdadm`, since we no longer set up RAID on servers.
Update the puppet that would call it to remove the `mdadm` dependency,
and run only if the state is not what it produces -- namely, a symlink
for `/var/lib/postgresql`, which must point to an existent
`/srv/postgresql` directory.
The end state it produces is _either_:
- `/srv/postgresql` already existed, which was symlinked into
`/var/lib/postgresql`; postgres is left untouched. This is the
situation if `setup_disks` is run on the database primary, or a
replica which was correctly configured.
- An empty `/srv/postgresql` now exists, symlinked into
`/var/lib/postgresql`, and postgres is stopped. This is the
situation if `puppet` was just run on a new host, or a
previously-configured host was rebooted (clearing the temporary
disk in `/dev/nvme0`)
In the latter case, where `/srv/postgresql` is now empty, any previous
contents of `/var/lib/postgresql` are placed under `/root`,
timestamped for uniqueness.
In either case, the tool should now be idempotent.
As the previous commit, this is currently only used in tuning, but is
a property of the whole postgres configuration; move it there, as just
the directory, not the file.
Use this directory consistently in the erb templates. Since we
produce a `pg_hba.conf`, it makes sense that we point to the path that we
know that we explicitly wrote to, for instance.
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
1f565a9f41 removed the `package` lines which install
`python-dateutil`, but not the line in `puppet_ops` that reference it;
as such, Puppet manifests in puppet_ops fail to compile.
Remove the stale reference to `python-dateutil`, which is unnecessary
since the code is python3, not python2.
This is vestigial.
It requires manually altering the `htdigest` file (not stored in this
repo) to change the digest realm from `wiki` to `monitoring`, and will
re-prompt users for their passwords if the browsers currently store
them.
Drop the change to move `/tmp` onto the local disk. Doing this move
confuses `resolved` until there is a restart, and has no clear
benefits. The change came in during bf82fadc95, but does not describe
the reasoning; it is particularly puzzling, since postgresql stores
its temporary files under `$PGDATA/base/pgsql_tmp`.
Do not RAID the disks together. This was previously done when they
were spinning media, for reliability; running them on an SSD obviates
this sufficiently. This means that updating the initramfs is also not
necessary.
This no longer has any rules specific to it. We leave the `postgres`
munin group (which now only contains `postgres_appdb`) as
future-proofing, and so that `postgres_appdb` matches to the puppet
manifest of the same name.
This allows straight-forward configuration of realm-based Tornado
sharding through simply editing /etc/zulip/zulip.conf to configure
shards and running scripts/refresh-sharding-and-restart.
Co-Author-By: Mateusz Mandera <mateusz.mandera@zulip.com>
Using the `host` virtual package confused Puppet into reporting it was
doing work every time one did a puppet run, resulting in unnecessarily
spammy output.
Anders Kaseorg
Alex Vandiver
Tim Abbott
Alex Vandiver
Anders Kaseorg
Tim Abbott