Here we have migrated checkboxes of all general notifications to the table.
By general notifications we mean, Mobile, Email, Desktop audio, and visual
notifications.
This is a part of a bigger migration to simply our notifications setting
changing infrastructure for all streams and individual streams. Later we
will add more row to this for different categories of notifications in
addition to the current ones ("Streams" and "PMs, mentions, alerts").
Fixes: #12182.
This is a full-stack change:
- server
- JS code
- templates
It's all pretty simple--just use stream_id instead
of stream_name.
I am 99% sure we don't document this API nor use it
in mobile, so it should be a safe change.
We know that by default the value of `enable_stream_push_notifications` is
true, so on some server if push notifications are disabled then due to
```
{{#unless show_push_notifications_tooltip}}
```
the `enable_stream_push_notifications` checkbox is rendered as unchecked
and when we update any other setting in the "Stream notifications" section,
due to `settings_notifications.update_page()` all checkboxes are changed to
current values which means above checkbox get checked.
We can deal with this bug either making changes in
`settings_notifications.update_page()` but we should show check/uncheck
state of checkboxes anyway so removing this `unless` condition fixes this
bug.
Instead of having logical expressions in templates, it's always preferred
to calculating them in javascript and pass the results as a context. It
also enhances the readability of templates and testing of such logic is
easier in js over templates.
As a consequence of too many options in the bottom `Other permissions`
subsection, the `Save` button could end up too far up from the bottom,
such that it might appear offscreen on low-height laptops.
We fix this by reorganizing the settings in a way that is both more
intuitive and also ensures that none of the subsections are too tall.
Fixes: #14274.
The user can pass description along with the task name by splitting the input string with hyphen.
Eg: Task Title - Task Description
todo_list: Add index numbers to task.
Original email address is shown to admin users in subscriber list when
email_address_visibilty is set to "Admins only" by passing delivery_email
at required places. Email address are not shown to non-admin users when
visibility is set to "Admins only".
Tweaked by tabbott to fix a few bugs and dead code.
Fixes a part of #13541.
User IDs are more robust than email addresses as they don't change
with time, and also don't have complications with
different email_address_visibility settings.
The bug was in complex `if` condition, which should mean that users should
be allowed to create a User group only when they are either admin or user
group creation policy is set to everyone.
Fixes: #13909.
This commit includes a new `stream_post_policy` setting,
by replacing the `is_announcement_only` field from the Stream model,
which is done by mirroring the structure of the existing
`create_stream_policy`.
It includes the necessary schema and database migrations to migrate
the is_announcement_only boolean field to stream_post_policy,
a smallPositiveInteger field similar to many other settings.
This change is done to allow organization administrators to restrict
new members from creating and posting to a stream. However, this does
not affect admins who are new members.
With many tweaks by tabbott to documentation under /help, etc.
Fixes#13616.
Earlier, on narrowing the window to some particular sizes,
long stream names used to overlap with the subscribe and view stream
buttons.
The issue was resolved by cutting the stream name short and putting
ellipses at the end. A title was provided to the stream name div so that
the entire stream name would be visible on hovering over it.
Fixes: #13139
Edited the warning to clearly state that most members/most stream members
will be notified on using wildcard mentions, along with the specific
mention (e.g. @ALL, @everyone and @stream).
Did a separate check for all wildcard mentions in util.js and stored the
corresponding mention in wildcard_mention inside compose.js.
Fixes: #13636
This change is in series of de-duplication of code in "Other permission"
section for various dropdowns.
Here rather than using "by_anyone" and "disabled" for the `value` attribute
of options, we use actual numeric values. As a result, we don't need to
manually handle to extract the data to be sent to the backend on saving.
This change is in series of de-duplication of code in "Other permission"
section for various dropdowns.
Here rather than using "by_admins_only" and "by_admins_only" for `value`
attribute of options, we use actual numeric values. This helps in
de-duplicating lot of code which is vulnerable to bugs.
For few settings like `waiting_period_threshold` it makes sense to have the
"value" attribute of option to have a value other than the actual setting
value because multiple settings are depending upon this dropdown, so
handling them in JS code makes more sense. But for many settings (which has
integer values), we have followed a wrong trend over the time of
representing every new dropdown with human-readable values and manually
handling them in JS Code, where it makes more sense to use actual setting
value. The result of which is code has become less concise, sensible and
less likely to be mistaken.
This is a preliminary commit for upcoming change where we will use
"bot_creation_policy_values" like approach for many other settings where
dropdown represents the only single setting of integer type.
We now use vdom-ish techniques to track the
list items for the pm list. When we go to update
the list, we only re-render nodes whose data
has changed, with two exceptions:
- Obviously, the first time we do a full render.
- If the keys for the items have changed (i.e.
a new node has come in or the order has changed),
we just re-render the whole list.
If the keys are the same since the last re-render, we
only re-render individual items if their data has
changed.
Most of the new code is in these two modules:
- pm_list_dom.js
- vdom.js
We remove all of the code in pm_list.js that is
related to updating DOM with unread counts.
For presence updates, we are now *never*
re-rendering the whole list, since presence
updates only change individual line items and
don't affect the keys. Instead, we just update
any changed elements in place.
The main thing that makes this all work is the
`update` method in `vdom`, which is totally generic
and essentially does a few simple jobs:
- detect if keys are different
- just render the whole ul as needed
- for items that change, do the appropriate
jQuery to update the item in place
Note that this code seems to play nice with simplebar.
Also, this code continues to use templates to render
the individual list items.
FWIW this code isn't radically different than list_render,
but it's got some key differences:
- There are fewer bells and whistles in this code.
Some of the stuff that list_render does is overkill
for the PM list.
- This code detects data changes.
Note that the vdom scheme is agnostic about templates;
it simply requires the child nodes to provide a render
method. (This is similar to list_render, which is also
technically agnostic about rendering, but which also
does use templates in most cases.)
These fixes are somewhat related to #13605, but we
haven't gotten a solid repro on that issue, and
the scrolling issues there may be orthogonal to the
redraws. But having fewer moving parts here should
help, and we won't get the rug pulled out from under
us on every presence update.
There are two possible extensions to this that are
somewhat overlapping in nature, but can be done
one a time.
* We can do a deeper vdom approach here that
gets us away from templates, and just have
nodes write to an AST. I have this on another
branch, but it might be overkill.
* We can avoid some redraws by detecting where
keys are moving up and down. I'm not completely
sure we need it for the PM list.
If this gets merged, we may want to try similar
things for the stream list, which also does a fairly
complicated mixture of big-hammer re-renders and
surgical updates-in-place (with custom code).
BTW we have 100% line coverage for vdom.js.
We mostly needed this for Casper tests, and that
usage was eliminated in the prior commit.
There was also some strange defensive code from
ecc42bc9f8 that
is really ancient and which I am eliminating:
const email = row.attr("data-email");
if ($("#deactivation_user_modal .email").html() !== email) {
blueslip.error("User deactivation canceled due to non-matching fields.");
ui_report.message(i18n.t("Deactivation encountered an error. Please reload and try again."),
$("#home-error"), 'alert-error');
}
If the code was there to protect against live
updates for email changes, then we no longer
have to worry about that, since we use user_ids
now as keys.
Or it might have to do with some ancient bug
where you could pop open two modals at once
or something. You can actually change users while
the modal is open (which is kinda strange, but ok),
and it works fine.
When testing this, I ran into the glitch that we
don't open redraw the Deactivated Users panel after
going into the User panel and deactivating a user.
In templates we determine checkboxes are disabled by using the following
`if` clause,
```
{{#if (or (and is_muted notification_setting) realm_setting_disabled)}}
disabled="disabled"
{{/if}}
```
and it is more intuitive to do such calculation in javascript code, so we
added an `if_disabled` attribute in `settings` context which replaces
logical operations from `if` statement.
So for non-notification settings, it is
```
is_disabled: check_realm_setting[setting]
```
where check_realm_setting[setting] is same as realm_setting_disabled.
and for notifiaction settings it is,
```
ret.is_disabled = check_realm_setting[setting] || sub.is_muted;
```
Adding invited users to the notifications stream unconditionally isn't
a correct behaviour for guest users, where the previous behavior of
including the notifications stream no longer makes sense. Therefore,
while inviting a new user, the notifications stream is listed along
with other streams with a message "recieves notifications for new
streams" in order to distinguish it from other streams.
Fixes#13645.
We used to put the user's email in a value, which was
redundant (we could find the value from
our parent's label) and brittle (would break
on email changes).
Now the DOM's a bit slimmer and more robust.
Also note that we now deal with user_ids, not emails,
in the call stack until we hit the "edge" and convert
to emails for the server.
If you clicked for no more topics and then the server didn't find any,
we once had code that would say "No more topics" in light gray at the
bottom of the topic list.
The feature appears to have been broken by some detail in the
`self.dom` refactoring. More importantly, it's not clear it's useful
as opposed to clutter.
Since we added the `stream.first_message_id` feature, it's now very
rare for the `more topics` option to appear when there aren't in fact
older topics that could be fetched. In cases where there are not, the
UI is still clear about what's happening -- it shows a loading
indicator and then displays a list of topics that doesn't have
anything new.
So we're removing this feature; we can re-add it without too much
difficulty if user feedback in the future suggests it would be useful
after all.
The only place we ever set active-sub-filter is
right after we build the template, so there is
no reason to have it be a separate step.
(I made a similar fix to pm_list recently, and
this helps set the stage for doing vdom-like
stuff.)
Currently, if we change stream we see the immediate saving of stream, but
it is more convenient to have "Save" and "Discard" buttons as we use
everywhere else in the organization setting subsystem.
(This is another preliminary commit in the direction of having
"save/discard" widget show up rather than saving immediately.)
The code for selecting and processing the stream for both types of
notifications is almost the same, so de-duplicated.
For "New stream notifications" and "New user notifications" it is more
intuitive to just use the new system for showing success/saving status
feedback.
Previously, if you tried to invite a user whose account had been
deactivated, we didn't provide a clear path forward for reactivating
the users, which was confusing.
We fix this by plumbing through to the frontend the information that
there is an existing user account with that email address in this
organization, but that it's deactivated. For administrators, we
provide a link for how to reactivate the user.
Fixes#8144.
This experimental setting disables sending private messages in Zulip
in a crude way (i.e. users get an error when they try to send one).
It makes no effort to adjust the UI to avoid advertising the idea of
sending private messages.
Fixes#6617.
There may be a deeper issue that various JavaScript logic expects
every message to have a `.message_content` element, but we definitely
should have the `.rendered_markdown` class on any markdown content.
Fixes#13634.
Instead of doing various ad-hoc calculations of
which PM is "active" and plumbing it through various
functions and then updating it via jQuery instead of
just the template, we now just calculate `is_active`
in `_build_private_messages_list` with a little
helper function.
We want to be able to unit test this value,
since it's conditional on several factors:
- am I an admin?
- can non-admins view emails?
- do we have delivery_email for the user?
I'm mocking show_email in the tests, since the
show_email code is in `settings_org` and
kind of hard to unit test. It's not impossible,
but it's too much for this commit. (Either
we need to extract it out to a nice file or
deal with mocking jQuery. That module is
mostly data-oriented, so it would be nice
to have something like `settings_config` that
is actually pure data.)
This avoids a stream having potentially near-infinite height when
opened in a stream with a large number of unread topics; the benefit
is that you can easily access the next stream.
We show an unread count next to "more topics" to make it hard to miss
that there might be more, older topics with unread messages.
With CSS work by Anders Kaseorg.
Fixes#13087.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Updates the message editing process to do a local 'echo'.
On slow connections, now there is visual confirmation of the edit,
similar to when sending messages. The contains_backend_only_syntax
logic and check are the same as there.
We showing "(SAVING)" until the edit is completed, and on successful
edit, the word "(EDITED)" appears. There's likely useful future work
to do on making the animation experience nicer.
Substantially rewritten by tabbott to better handle corner cases and
communicate more clearly about what's happening.
Fixes: #3530.
Hovering over user names (and user circles for PM List) now displays
Name, Status Message and Last online time in a js tooltip.
Hovering over group names displays the names of all group members.
Unavailable users are shown as "Last active: Today".
Hovering on a user circle in the Buddy List results in a js tooltip
with Active/Idle/Offline/Unavailable for
green/orange/white/white-with-line.
Resolves#11607.
These should work consistently with how the individual user setting
works; see the last commit.
With changes from tabbott to fix real-time sync.
Fixes#12553.
This fixes two regressions in 1946692f9a.
The first bug was actually introduced much earlier, namely that we
were not sending a `bot_owner_id` field at all for bot users without
an owner. The correct behavior would have been send `None` for the
owner field.
The second bug was simply that we needed to update the webapp to look
for the `bot_owner_id` field, rather than an old email-address format
`bot_owner` field.
Thanks to Vinit Singh for reporting this bug.
In 50545a3 we made an incomplete revert of some style changes from
7b8da9b, this commit reverts the "x" to "fa fa-times" and also fixes an
alignment issue for the "Discard" box in chrome.
Fixes#13233.
The previous code for ensuring the sort order of emoji choices was
correct relied on an OrderedDict structure, which isn't guaranteed to
be preserved when passed to the frontend via JSON (in fact, it isn't,
since we converted the way page_params is passed to use
sort_keys=True). Switch it to a list of dictionaries to correct this.
Fixes#13220.
Apparently, the Zulip notifications (and resulting emails) were
correct, but the download links inside the Zulip UI were incorrectly
not including S3 prefix on the URL, making them not work.
While we're at this, we rewrite the somewhat convoluted previous
system for formatting the data export output.
Fixes#13134 as the last commit in the series for this issue.
Solves the "The (?) should just be a target=_blank link to
/help/message-a-stream-by-email." part of the issue.
As a result, a bunch code managing the email hint popup can be deleted,
together with a node test for that.
As other data of field, such as field name, hint etc. are
relative to field type, this commit moves the field type
input to the first order in create field form in org settings.
02cfb47 removed a couple HTML tags that were
being used to sort the table. We fix this,
but disable filtering exports by marking the
input type as `hidden`. We use this approach as
it seems `list_render` doesn't like an
undefined `opts.filter.element`, which is
what happens if we simply remove the `filter`
key.
Follow up of commit 2a1305d. Replace all local variables named 'msgid'
with 'message_id' in all JS and HTML files, and adds a linter rule for
it as well.
Resolves#12952.
This is in series of refactoring of code for realm logo settings.
Further, we will remove ids from the template as well and simply use
general classes (.day-settings and .night-settings) to identify to which
theme-mode particular element belongs i.e. day or night as we did in this
change.
Pragati Agrawal
Steve Howell
Siddharth Varshney
majordwarf
sahil839
Tim Abbott
Wyatt Hoodes
Anders Kaseorg
Ryan Rehman
Vaibhav Raj Singh
Hashir Sarwar
Tlazypanda
Gaurav Thapar
Jack Tiggleman
Vinit Singh
Sophie
Matheus Melo
Thomas Ip
YashRE42
Ivan Mitev
YashRE42
Joao Mauricio Carvalho
Mateusz Mandera
Yashashvi Dave
Rishi Gupta