Pass the HttpRequest explicitly through the two webhooks that log to
the webhook loggers.
get_current_request is now unused, so remove it (in the same commit
for test coverage reasons).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Previously, the assignee message would stick around in the middle of the
event message. This doesn't look as good as if we put it to the end of
the event message. These changes does just that and move the assignee
messages towards the end of the event message to make it look better
and cleaner for the readers.
This is a follow up to #24673, we want to modify every webhook events to
follow the same pattern and consistency where branch name should only
show on opened and merged events.
This unifies the length of the shortened SHA our integrations generate,
and ensures that they are long enough for projects of various sizes with
a chosen value defined in get_short_sha.
Fixes#23475
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
7 characters are not enough for large projects, so we change
it to reasonably longer. As an example, The Linux kernel needs
at least 11 characters of sha in its shortened form to identify
a revision. We pick 11 so it should work for most of the projects.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This change allow check_webhook to raise an error when a message is
sent and vice versa. This is useful when one payload is not expecting
any output messages.
Since FIXTURE_DIR_NAME is the name of the folder that contains the view
and tests modules of the webhook and another folder called "fixtures" that
store the fixtures, it is more appropriate to call it WEBHOOK_DIR_NAME,
especially when we want to refer to the view module using this variable.
Even before GDPR changes, it was strange that we displayed
users differently for fork events vs. all other events.
After GDPR, we don't even get the `username` field any
more.
So now we simply use `display_name` if available, and then
we try `nickname`.
See https://developer.atlassian.com/cloud/bitbucket/bitbucket-api-changes-gdpr/
for more context.
If we're not passing in expected_topic or expected_message
to check_webhook, it's better to just call send_webhook_payload,
since we'll want to explicitly check our messages
anyway.
This preps us to always require those fields for
check_webhook, which can prevent insidious testing no-ops.
This forces us to be a bit more explicit about testing
the three key values in any stream message, and it
also de-clutters the code a bit. I eventually want
to phase out do_test_topic and friends, since they
have the pitfall that you can call them and have them
do nothing, because they don't actually require
values to be be passed in.
I also clean up the code a bit for the tests that
have two new messages arriving.
Almost all webhook tests use this helper, except a few
webhooks that write to private streams.
Being concise is important here, and the name
`self.send_and_test_stream_message` always confused
me, since it sounds you're sending a stream message,
and it leaves out the webhook piece.
We should consider renaming `send_and_test_private_message`
to something like `check_webhook_private`, but I couldn't
decide on a great name, and it's very rarely used. So
for now I just made sure the docstrings of the two
sibling functions reference each other.
The "EXPECTED_" prefix and "_EVENTS" suffix
usually provided more noise than signal.
We also use module constants to avoid the "self."
noise. It also makes it a bit more clear which
constants actually have to be in the class (e.g.
"FIXTURE_DIR_NAME") to do their job.
Automatically generated by the following script, based on the output
of lint with flake8-comma:
import re
import sys
last_filename = None
last_row = None
lines = []
for msg in sys.stdin:
m = re.match(
r"\x1b\[35mflake8 \|\x1b\[0m \x1b\[1;31m(.+):(\d+):(\d+): (\w+)", msg
)
if m:
filename, row_str, col_str, err = m.groups()
row, col = int(row_str), int(col_str)
if filename == last_filename:
assert last_row != row
else:
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
with open(filename) as f:
lines = f.readlines()
last_filename = filename
last_row = row
line = lines[row - 1]
if err in ["C812", "C815"]:
lines[row - 1] = line[: col - 1] + "," + line[col - 1 :]
elif err in ["C819"]:
assert line[col - 2] == ","
lines[row - 1] = line[: col - 2] + line[col - 1 :].lstrip(" ")
if last_filename is not None:
with open(last_filename, "w") as f:
f.writelines(lines)
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
mock is just a backport of the standard library’s unittest.mock now.
The SAMLAuthBackendTest change is needed because
MagicMock.call_args.args wasn’t introduced until Python
3.8 (https://bugs.python.org/issue21269).
The PROVISION_VERSION bump is skipped because mock is still an
indirect dev requirement via moto.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Generated by `pyupgrade --py3-plus --keep-percent-format` on all our
Python code except `zthumbor` and `zulip-ec2-configure-interfaces`,
followed by manual indentation fixes.
Signed-off-by: Anders Kaseorg <anders@zulipchat.com>
Instead of just referring to the commit with the raw URL, we
should use the commit ID as the text of the hyperlink.
Note that in commit_status_changed type messages, the name of the
commit isn't available.
The function that generates the body of the commit_status_changed
event messages generated an invalid commit URL.
Most likely, we missed this because this event type is fairly
vague and it is possible it was never tested by users much,
if at all.
This is a follow-up in response to Tim's comments on #9951.
In instances where all messages from a BitBucket integration are
grouped under one user specified topic (specified in the URL), we
should include the title of the PR in the message body, since
the availability of a user-specified topic precludes us from
including it in the topic itself (which was the default behaviour).
These are the straightforward ones.
Note that there is a line in zerver.lib.test_classes.build_webhook_url
that lost test coverage. That's because most of our tests test using
stream messages so the webhook URLs being tested always have a query
parameter. So the line that accounts for there being no query
parameters never gets called, which is fine, but we should still
keep it.
We now ignore payloads where payload['push']['changes'] is empty,
because an empty push doesn't really convey any useful information.
I couldn't find a way to replicate the action that would generate
such a payload, so I took one of our existing payloads and editted
out payload['push']['changes'] myself, so this payload is not
authentic.
This commit migrates all webhooks to use check_send_stream_message
instead of check_send_message. The only two webhooks that still
use check_send_message are our yo and teamcity webhooks. They
both use check_send_message for private messages.
All webhook fixtures in zerver/fixtures/<webhook_name> have now
been moved to dedicated webhook-specific directories under
zerver/webhooks/<webhook_name>/fixtures, where <webhook_name> is
the name of the webhook.
For our Git integrations, we now only display the number of commits
pushed when the pusher also happens to be the only author of the
commits being pushed.
Part of #3968.
Follow-up to #4006.
For Git push messages, we now have a single space character between
the name of a commit's author and the number of commits by that
author, plus a period at the end.
Part of #3968.
Follow-up to #4006.
We now show a few new things:
(1) The number of commits pushed.
(2) Who authored the commits (just counts, not which specific ones, for brevity).
Add tests for case of multiple committers.
Part of #3968.
Anders Kaseorg
Joelute
Zixuan James Li
PIG208
ritik
Steve Howell
Anders Kaseorg
Tim Abbott
Eeshan Garg
Anders Kaseorg
Steve Howell
Aditya Bansal
neiljp (Neil Pilgrim)
fredfishgames
rht
Siddharth Mahapatra
Tomasz Kolek