Previously, zerver.views.registration.confirmation_key was only
available in development; now we make that more structurally clear by
moving it to the special zerver/views/development directory.
Fixes#11256.
Some urls are only available in the development environment
(dev_urls.py); Corresponding views (here email_log.py) is moved to the
new directory zerver/views/development.
Fixes#11256.
We had an inconsistent behavior when `LDAP_APPEND_DOMAIN` was set
in that we allowed user to enter username instead of his email in
the auth form but later the workflow failed due to a small bug.
Fixes: #10917.
This endpoint serves requests which might originate from an image
preview link which had an http url and the message holding the image
link was rendered before we introduced thumbnailing. In that case
we would have used a camo proxy to proxy http content over https and
avoid mix content warnings.
In near future, we plan to drop use of camo and just rely on thumbor
to serve such images. This endpoint helps maintain backward
compatibility for links which were already rendered.
This setting splits away part of responsibility from THUMBOR_URL.
Now on, this setting will be responsible for controlling whether
we thumbnail images or not by asking bugdown to render image links
to hit our /thumbnail endpoint. This is irrespective of what
THUMBOR_URL is set to though ideally THUMBOR_URL should be set
to point to a running thumbor instance.
This is somewhat hacky, in that in order to do what we're doing, we
need to parse the HTML of the rendered page to extract the first
paragraph to include in the open graph description field. But
BeautifulSoup does a good job of it.
This carries a nontrivial performance penalty for loading these pages,
but overall /help/ is a low-traffic site compared to the main app, so
it doesn't matter much.
(As a sidenote, it wouldn't be a bad idea to cache this stuff).
There's lots of things we can improve in this, largely through editing
the articles, but we can deal with that over time.
Thanks to Rishi for writing all the tests.
This adds a new realm_logo field, which is a horizontal-format logo to
be displayed in the top-left corner of the webapp, and any other
places where we might want a wide-format branding of the organization.
Tweaked significantly by tabbott to rebase, fix styling, etc.
Fixing the styling of this feature's loading indicator caused me to
notice the loading indicator for the realm_icon feature was also ugly,
so I fixed that too.
Fixes#7995.
This should make it possible for blueslip error reports to be sent on
our logged-out portico pages, which should in turn make it possible to
debug any such issues as they occur.
This should make life a lot more convenient for organizations that use
the LDAP integration and have their avatars in LDAP already.
This hasn't been end-to-end tested against LDAP yet, so there may be
some minor revisions, but fundamentally, it works, has automated
tests, and should be easy to maintain.
Fixes#286.
Apparently, Django's get_current_site function (used, e.g., in
django-two-factor to look up the domain to use in QR codes) first
tries to use the Sites framework, and if unavailable, does the right
thing (namely, using request.get_host()).
We don't use the Sites framework for anything in Zulip, so the correct
fix is to just remove it.
Fixes#11014.
A key part of this is the new helper, get_user_by_delivery_email. Its
verbose name is important for clarity; it should help avoid blind
copy-pasting of get_user (which we'll also want to rename).
Unfortunately, it requires detailed understanding of the context to
figure out which one to use; each is used in about half of call sites.
Another important note is that this PR doesn't migrate get_user calls
in the tests except where not doing so would cause the tests to fail.
This probably deserves a follow-up refactor to avoid bugs here.
This makes it possible to still run the deliver_scheduled_messages
queue worker, even though we're not creating reminder-bot by default
in new organizations.
This reverts commit 2fa77d9d54.
Further investigation has determined that this did not fix the
password-reset problem described in the previous commit message;
meanwhile, it causes other problems. We still need to track down the
root cause of the original password-reset bug.
This adds a web flow and management command for reactivating a Zulip
organization, with confirmation from one of the organization
administrators.
Further work is needed to make the emails nicer (ideally, we'd send
one email with all the admins on the `To` line, but the `send_email`
library doesn't support that).
Fixes#10783.
With significant tweaks to the email text by tabbott.
Realm object is not json-serializable; store the realm id instead
and retrieve the realm in social_auth_finish using
`Realm.objects.get(id=return_data["realm_id"])`.
The email_list returned has the primary email as the first element.
Testing: The order of the emails in the test was changed to put a
verified email before the primary one. The tests would fail without
this commit's change after the changes in the order of test emails.
See https://github.com/zulip/zulip/issues/10856 for details on the bug
here; but basically, users who reset their password were unable to
login until the next time we flushed memcached. The issue disappeared
after stopping using the Django cached_db session engine, so it's
pretty clear that some sort of bug with that session engine
interacting with our password reset logic is the root cause.
Further debugging is required to understand this fully, but for now,
it seems wise to just disable the backend.
The cost of doing so is a small performance decrease, which is likely
acceptable until we can resolve this (it's certainly a more minor
problem than the "Can't login" bug that disabling this removes).
This is a preparatory commit which will help us with removing camo.
In the upcoming commits we introduce a new endpoint which is based
out on the setting CAMO_URI. Since camo could have been hosted on
a different server as well from the main Zulip server, this change
will help us realise in tests how that scenerio might be dealt with.
These lazy imports save a significant amount of time on Zulip's core
import process, because mock imports pbr, which in turn import
pkgresources, which is in turn incredibly slow to import.
Fixes part of #9953.
This is a performance optimization; see the comment. This fixes part
of #9953.
Eventually, we should do the same thing for importing Tornado as well,
but it's less important because Tornado is a much smaller library.
Before, presence information for an entire realm could only be queried via
the `POST /api/v1/users/me/presence` endpoint. However, this endpoint also
updates the presence information for the user making the request. Therefore,
bot users are not allowed to access this endpoint because they don't have
any presence data.
This commit adds a new endpoint `GET /api/v1/realm/presence` that just
returns the presence information for the realm of the caller.
Fixes#10651.
Some admins setting up Zulip's LDAP auth against Active Directory see
a rather baffling error message: "In order to perform this operation a
successful bind must be completed on the connection". This happens
despite AUTH_LDAP_BIND_DN and auth_ldap_bind_password being set
perfectly correctly, and on a query that the `ldapsearch` command-line
tool performs quite happily.
Empirically, adding a setting like this to /etc/zulip/settings.py
resolves the issue:
AUTH_LDAP_CONNECTION_OPTIONS = {
ldap.OPT_REFERRALS: 0
}
Some useful, concise background on the LDAP "referral" concept is here:
https://docs.oracle.com/javase/jndi/tutorial/ldap/referral/overview.html
and a pertinent bit of docs for the underlying Python `ldap` client:
https://www.python-ldap.org/en/latest/faq.html
and some very helpful documentation for Active Directory:
https://docs.microsoft.com/en-us/windows/desktop/ad/referrals
Based on the docs above, the story appears to be something like this:
* This server has the information for part of the scope of our query
-- in particular it happens to have the information we actually want.
* But there are other areas ("subordinate domains") that our query is
in principle asking about, and this server doesn't know if there are
matches there, so it gives us a referral.
* And by default, python-ldap lets `libldap` run ahead and attempt to
bind to those referrals and do those queries too -- which raises an
error because, unlike Microsoft's "LDAP API", it doesn't reuse the
credentials.
So if we simply skip trying to follow the referrals, there's no
error... and we already have, from the original response, the answer
we actually need. That's what the `ldap.OPT_REFERRALS` option does.
There may be more complex situations where the referral really is
relevant, because the desired user info is split across servers. Even
then, unless an anonymous query will be acceptable, there's no point
in letting `libldap` follow the referral and setting this option is
still the right thing. When someone eventually comes to this bridge,
some code will be required to cross it, by following the referrals.
That code might look a bit like this (unfinished) example:
https://bugs.launchpad.net/nav/+bug/1209178
Manually tested by tabbott.
Fixes#343, which was effectively a report of the need for this
OPT_REFERRALS setting.
Fixes#349, since with this change, we no longer require tricky manual
configuration to get Active Directory up and running.
The term "username" confusingly refers both to the Django concept of
"username" (meaning "the name the user types into the login form") and
a concept the admin presumably already has in their existing
environment; which may or may not be the same thing, and in fact this
is where we document the admin's choice of whether and how they should
correspond. The Django concept in particular isn't obvious, and is
counterintuitive when it means something like an email address.
Explicitly explain the Django "username" concept, under the name of
"Zulip username" to take responsibility for our choice of how it's
exposed in the settings interface. Then use an explicit qualifier,
like "LDAP username", whenever referring to some other notion of
username. And make a pass over this whole side of the instructions,
in particular for consistent handling of these concepts.
Expand on a few things that tend to confuse people (especially the
`%(user)s` thing); move the `LDAPSearchUnion` example out to docs;
adjust the instructions to fit a bit better in their new docs/ home.
This makes it easier to iterate on these, and to expand supplemental
information (like troubleshooting, or unusual configurations) without
further straining the already-dauntingly-long settings.py.
It also makes it easier to consult the instructions while editing the
secrets file, or testing things, etc. -- most admins will find it more
natural to keep a browser open somewhere than a second terminal.
Fixes part of #10297.
Use FAKE_LDAP_NUM_USERS which specifies the number of LDAP users
instead of FAKE_LDAP_EXTRA_USERS which specified the number of
extra users.
Also use name for selecting form in casper tests
as form with action=new is present in both /new
and /accounts/new/send_confirm/ which breaks
test in CircleCI as
waitWhileVisible('form[action^="/new/"]) never stops
waiting.
This uses the recently introduced active_mobile_push_notification
flag; messages that have had a mobile push notification sent will have
a removal push notification sent as soon as they are marked as read.
Note that this feature is behind a setting,
SEND_REMOVE_PUSH_NOTIFICATIONS, since the notification format is not
supported by the mobile apps yet, and we want to give a grace period
before we start sending notifications that appear as (null) to
clients. But the tracking logic to maintain the set of message IDs
with an active push notification runs unconditionally.
This is designed with at-least-once semantics; so mobile clients need
to handle the possibility that they receive duplicat requests to
remove a push notification.
We reuse the existing missedmessage_mobile_notifications queue
processor for the work, to avoid materially impacting the latency of
marking messages as read.
Fixes#7459, though we'll need to open a follow-up issue for
using these data on iOS.
This uses the MockLDAP class of fakeldap to fake a ldap server, based
on the approach already used in the tests in `test_auth_backends.py`.
Adds the following settings:
- FAKE_LDAP_MODE: Lets user choose out of three preset configurations.
The default mode if someone erases the entry in settings is 'a'. The
fake ldap server is disable if this option is set to None.
- FAKE_LDAP_EXTRA_USERS: Number of extra users in LDAP directory beyond
the default 8.
Fixes#9934.
Generates ldap_dir based on the mode and the no. of extra users.
It supports three modes, 'a', 'b' and 'c', description for which
can be found in prod_settings_templates.py.
That value is necessary to configure anonymous binds in
django-auth-ldap, which are useful when we're using LDAP just to
populate the user database.
Fixes#10257.
This lets us have a slightly cleaner interface for cases where we need
a custom default value than an `or None` in the definition (which
might cause issues with other falsey values).
The autenticate function now follows the signature of
Django 2.0 https://github.com/django-auth-ldap/
django-auth-ldap/commit/27a8052b26f1d3a43cdbcdfc8e7dc0322580adae
Also AUTH_LDAP_CACHE_GROUPS is depricated in favor of
AUTH_LDAP_CACHE_TIMEOUT.
We already had a setting for whether these logs were enabled; now it
also controls which stream the messages go to.
As part of this migration, we disable the feature in dev/production by
default; it's not useful for most environments.
Fixes the proximal data-export issue reported in #10078 (namely, a
stream with nobody ever subscribed to having been created).
As part of our effort to change the data model away from each user
having a single API key, we're eliminating the couple requests that
were made from Django to Tornado (as part of a /register or home
request) where we used the user's API key grabbed from the database
for authentication.
Instead, we use the (already existing) internal_notify_view
authentication mechanism, which uses the SHARED_SECRET setting for
security, for these requests, and just fetch the user object using
get_user_profile_by_id directly.
Tweaked by Yago to include the new /api/v1/events/internal endpoint in
the exempt_patterns list in test_helpers, since it's an endpoint we call
through Tornado. Also added a couple missing return type annotations.
Input pills require a contenteditable div with a class named input
to fall inside the pill container. On converting the input tag into
a div, the size of the input decreases which is compensated by a
line-height of 40px. Comment above letter-spacing:normal was removed
as chrome and firefox do not change the letter-spacing to normal
for a div via the default browser stylesheet.
NOTE: Currently writing something into the div will call the action
corresponding to that key in the keyboard shortcuts. The input will
work fine once the pills have been initiated.
For the casper tests, for now, we just use the legacy search code.
When we change that, $.val() cannot be used on contenteditable div, so
$.html() will need to be used instead in select_item_via_typeahead.
This setting isn't intended to exist long term, but instead to make it
possible to merge our search pills code before we're ready to cut over
production environments to use it.
Various pieces of our thumbor-based thumbnailing system were already
merged; this adds the remaining pieces required for it to work:
* a THUMBOR_URL Django setting that controls whether thumbor is
enabled on the Zulip server (and if so, where thumbor is hosted).
* Replaces the overly complicated prototype cryptography logic
* Adds a /thumbnail endpoint (supported both on web and mobile) for
accessing thumbnails in messages, designed to support hosting both
external URLs as well as uploaded files (and applying Zulip's
security model for access to thumbnails of uploaded files).
* Modifies bugdown to, when THUMBOR_URL is set, render images with the
`src` attribute pointing /thumbnail (to provide a small thumbnail
for the image), along with adding a "data-original" attribute that
can be used to access the "original/full" size version of the image.
There are a few things that don't work quite yet:
* The S3 backend support is incomplete and doesn't work yet.
* The error pages for unauthorized access are ugly.
* We might want to rename data-original and /thumbnail?size=original
to use some other name, like "full", that better reflects the fact
that we're potentially not serving the original image URL.
In this commit we add a new endpoint so as to have a way of fetching
topic history for a given stream id without having to be logged in.
This can only happen if the said stream is web public otherwise we
just return an empty topics list. This endpoint is quite analogous
to get_topics_backend which is used by our main web app.
In this commit we also do a bit of duplication regarding the query
responsible for fetching all the topics from DB. Basically this
query is exactly the same as what we have in the
get_topic_history_for_stream function in actions.py. Basically
duplicating now is the right thing to do because this query is
really gonna change when we add another criteria for filtering
messages which is:
Only topics for messages which were sent during the period the
corresponding stream was web public should be returned.
Now when we will do this, the query will change and thus it won't
really be a code duplication!
Vaibhav
Harshit Bansal
Mateusz Mandera
Marco Burstein
Aditya Bansal
Steve Howell
Tim Abbott
Rishi Gupta
seresheim
Joshua Pan
Roman Godov
Jack Zhang
Anders Kaseorg
Vishnu Ks
Raymond Akornor
Shubham Padia
neiljp (Neil Pilgrim)
Kevin Lin
Greg Price
Luis Silva
Lyla Fischer
Priyank Patel