The domain name is being set in the helper function
'slack_workspace_to_realm', but it should be set in the main function
'do_convert_data', as we need it in other child functions of
'do_convert_data'.
This code was originally written when we were using the old South
system, and hasn't been used in a few years. It probably doesn't
work, and thus only serves to clutter the codebase.
Originally was going to centralize this in zerver/lib/request.pyi, but this
file is not visible at run-time, being only a stub. The matching request.py
file seemed inappropriate, as it doesn't actually use ViewFuncT.
Namely, annotate as best as possible, and add notes to indicate preference,
if QuerySet develops generic typing.
Note that the return values of functions with annotations changed in this
commit are used elsewhere as QuerySets, so the Sequence[T] approach used
for some functions in models.py is not applicable.
This will allow realm admins to access subscribers of unsubscribed
private stream. This is a preparatory commit for letting realm admins
remove those users.
This will allow realm admins to update the names and descriptions of
private streams even if they are not subscribed, which fixes the buggy
behavior that previously nobody could(!).
Apparently, we did essentially all the work to support showing full
topic history to newly subscribed users from a data flow perspective,
but didn't actually enable this feature by having the topic history
endpoint grant access to historical topics. This fixes that gap.
I'm not altogether happy with how the code and tests read for this
feature; the code itself has more duplication than I'd like, and the
tests do too, but it works.
This commit refactors the bugdown to perform a lookup only on active
realm emojis. This was needed because once we migrate realm emojis
to be addressed by `id` rather than name, it will be costly to
perform a lookup on all the realm emojis.
If user has disabled message content in missed email notifications,
we shouldn't send any informations about missed messages i.e. sender,
stream, message text, etc. to email servers.
We are already hiding this informations in email templates, but we
shoudln't expose any information about message content if user
has disabled this setting.
If new private stream is created by realm admin without realm admin
subscribed to it, then it doesn't automatically add created stream to
realm admin's stream list. We have to reload the browser to get newly
created stream in stream list. Cause private stream creation event is
only sent to the subscribed users to private stream, so even if realm
admin is acting user, they don't get creation event.
We should send private stream creation event to realm admin users along
with subscribed user to stream, as realm admins can access unsubscribed
private streams.
Tweaked by tabbott to fix various typos and clean up the code.
Till now, we had been storing realm emoji's name in emoji code field
in reactions' model. This commit migrates it to store realm emoji's id.
It is a part of effort to migrate realm emojis to be referenced by their
id and not by name.
"incorrect" here means rejected by a bot's validate_config() method.
A common scenario for this is validating API keys before the bot is
created. If validate_config() fails, the bot will not be created.
Adds realm_bot delete event. On bot ownership change, add event is
sent to the bot_owner(if not admin) and delete event to the
previous bot owner(if not admin). For admin, update event is sent.
The messages were first being read and passed to the helper
functions channel wise.
This function makes a list of all the messages in the all the channels
beforehand which would be used to pass in the helper functions.
This field has been unused by clients for some time, and isn't great
for our public archive feature plans (where we'll not want to be
including email addresses in messages).
Add `translate_emoticons` to `prop_types` and `expected_keys`.
Furthermore, create a emoji-translating Markdown inline pattern.
Also use a JavaScript version of `translate_emoticons` and then use
this function during Markdown previews and as a preprocessor. This
is only needed for previews, because usually emoticon translation
happens on the backend after sending.
Add tests for emoticon translation, a settings UI, and a /help/ page
as well.
Tweaked by tabbott to fix various test failurse as well as how this
handles whitespace, requiring emoticons to not have adjacent
characters.
Fixes#1768.
This sets up a new test class with a simple
test, mostly for increasing coverage. The class
should in the future be extended to properly
verify the handle_feedback() logic.
Previously, when a user updated the config data of an
embedded bot, only the updated fields were dispatched
back to the client. Dispatching all config data fields
makes the client updating code less brittle.
During a slack import, we don't have medium-size avatars already
available in the export data set (and possibly also with a normal
import/export?). The medium size avatar can be created by the
'ensure_medium_avatar_image' function, which checks if the medium
image exists, and if it doesn't, it creates the image.
This commit was substantially edited by tabbott to get rid of an
undefined variable bug, avoid initializing the upload backend classes
in a loop, and add some TODO notes on things that could be improved
later.
slack avatar urls have the format:
'https://ca.slack-edge.com/<team_id>-<user_id>-<avatar_hash>-<size>'
For any url of this form, if the user hasn't uploaded an image,
Slack uses default gravatar, but we don't have a way of knowing if Slack
has used the uploaded image or the custom gravatar
eg: https://ca.slack-edge.com/T5YFFM2QY-U6006P1CN-gd41c3c33cbe-512.
Hence, avatar_source should be mapped to 'U'.
models.py should only contain thin wrapper functions. Furthermore,
this move allows us to remove the circular imports. The two moved
functions are interdependent and are thus moved in one commit.
The check for the channel ('general' and 'random') must be added before
'build_defaultstream' function is called and then the id is incremented.
Otherwise, the id appended at the end of second defaultstream object, which would be
greater than the total number of defaultstream objects would crash at
'defaultstream_id_list[defaultstream_id]' which is a paramater of 'build_defaultstream'.
Added tests to prevent the same.
This commit:
* Removes the unnecessary screenshot.
* Reorders the instructions and combines them in to 4 steps.
* Improves the contents of the webhook-url-with-bot-email-indented.md
macro and makes it more consistent with create-bot-construct-url.md.
* Sets the recommended stream name to "commits", since that's what
the webhook function for Beanstalk expects in
zerver/webhooks/beanstalk/view.py. This allows us to use the
create-stream.md macro.
Creating the very first organization administrator user and
subscribing them to streams before any messages were sent resulted in
RealmAuditLog entries being created with a `event_last_message_id` of
None, because that's the maximum ID in the empty set.
We correct this by fixing the incorrectly created RealmAuditLog
entries, both for new servers and also fixing old broken entries on
existing servers.
This fixes an issue where if a user setup a Zulip server with just the
organization administrator, and then forgot about it (so that the
initial user became soft-deactivated), trying to sign in 3 weeks later
would throw an exception.
This fixes the issue reported here:
https://chat.zulip.org/#narrow/stream/9-issues/subject/500.20error.20on.20login/near/511981
The total number of stream objects are allocated to
total_users. They should be allocated to the total_channels.
This passed the tests as the total number of users in the test
where greater than the total number of channels.
The Markdown extension that lives inside
zerver/lib/bugdown/api_code_example.py previously used ujson.
ujson's `dumps` function doesn't accept a `separators` argument,
which means we have no control over how the JSON is pretty-printed.
This resulted in JSON fixtures with no spaces after the colon, which
looks unnecessarily convoluted.
So now, we use the built-in `json` module to get around this.
For further reading, this issue
<https://github.com/esnme/ultrajson/issues/82> opened on ujson's
repo explains why they are reluctant to support such formatting
due to performance considerations.
This commit adds a test for the sample fixture for when an invalid
stream name is passed to a query that expects a valid stream name
as an argument. This is the case with almost all of our queries
documented under the sidebar heading "Streams".
EDIT: Actually, I was wrong. This payload is highly specific to
get-stream-id, so it shouldn't be a part of common-error-payloads
at all.
In templates/zerver/api/delete-queue.md, we have a sample fixture
for when the queue_id passed to client.deregister_queue is not
valid or the event queue in question has already been deleted.
This commit tests that fixture.
Note that this error payload is specific to client.deregister_queue.
In templates/zerver/api/create-user.md, we have a sample fixture
for when a client attempts to create a user with the same email
as an existing user. This commit adds a test for that fixture.
Note that this error payload is specific to client.create_user
and this error payload isn't generated anywhere else.
In templates/zerver/api/add-subscriptions, we have a sample fixture
for when the user being subscribed is already subscribed to a
stream. This commit tests that fixture against a running server.
This commit adds tests for the fixture for when a user is not
authorized (perhaps because the query requires the use of admin
privileges) for a particular query.
In templates/zerver/api/update-message.md, we have a sample fixture
for when a zulip.Client does not have the permission to update/edit
a particular message. This commit adds a test for that fixture.
Also, tools/test-api now also uses a non-admin client for this test,
which might come in handy in the future.
This commit adds tests for the sample fixture for when a required
request argument is missing. Also, it moves the sample fixture
to common-error-payloads.md, since this is an error payload that
is common to most requests (except the ones that don't take any
arguments).
In templates/zerver/api/private-message.md, we have a sample fixture
for when the email address of the PM's recipient is invalid. This
commit makes sure that fixture is tested against a running server.
In templates/zerver/api/stream-message.md, we have a sample fixture
for when the target stream does not exist. This commit adds a test
for that sample fixture.
This changes the missed-message logic to use the new encoding
scheme for stream url fragments that prefixes them with
"{stream_id}-".
For simplicity sake, we just get a Stream object to pass to
the helper functions, and we only call get_display_recipient()
now for the HUDDLE case. (We were calling it wastefully before
for the PM case.)
This commit prefixes stream names in urls with stream ids,
so that the urls don't break when we rename streams.
strean name: foo bar.com%
before: #narrow/stream/foo.20bar.2Ecom.25
after: #narrow/stream/20-foo-bar.2Ecom.25
For new realms, everything is simple under the new scheme, since
we just parse out the stream id every time to figure out where
to narrow.
For old realms, any old URLs will still work under the new scheme,
assuming the stream hasn't been renamed (and of course old urls
wouldn't have survived stream renaming in the first place). The one
exception is the hopefully rare case of a stream name starting with
something like "99-" and colliding with another stream whose id is 99.
The way that we enocde the stream name portion of the URL is kind
of unimportant now, since we really only look at the stream id, but
we still want a safe encoding of the name that is mostly human
readable, so we now convert spaces to dashes in the stream name. Also,
we try to ensure more code on both sides (frontend and backend) calls
common functions to do the encoding.
Fixes#4713
We use the command
'select nextval('sequence') from generate_series(1, increment_number)'
which returns a list of allocated values for the ids.
This list is used to assign ids to the to be converted objects.
This adds button under "Organization profile" settings, which
deactivates the organization and sends an "event" to all the
active user and log out them.
Fixes: #8212.
This enforces `**` around all the mentions including "at-all" and
"at-everyone" mentions. Hence this makes `@all` and `@everyone`
invalid mentions, resulting into proper syntax for these mentions as
`@**all**` and `@**everyone**` respectively.
Note from tabbott: This removes an old feature/syntax, which made
sense back when @Tim was also a way to mention a user with Tim as
their first name. Given how nice typeahead is now, the user part of
the feature was removed a while ago; this should have gone at the same
time.
Fixes: #8143.
This commit modifies the Markdown extension in bugdown/api_code_examples.py
to support rendering code examples in multiple languages by specifying
the language like so:
{generate_code_example(python)|doc.md|example}
This makes us one step closer towards adding support for testable
JavaScript code examples.
This commit simply adds a comment in zerver/lib/api_test_helpers.py
explaining why it isn't worth the effort to explicitly test the
code example in api/get-events-from-queue.md.
This may be helpful for some API clients, since it avoids them needed
to do somewhat messy post-processing on the results (the data was
always available via scanning for the first unread message in the result).
Fixes#6244.
External bots may call bot_handler.quit() when
they wish to terminate, e.g. due to a misconfiguration.
Currently, embedded bots ignore calls to quit(), even
though they signal a problem. This commit does the first
step in handling quit() calls by logging a warning.
This is based on usage in bulk_change_user_names.py, and that
the RealmAuditLog acting_user field is Optional[UserProfile].
This could be more meaningfully changed in future, perhaps to
indicate that the command was run by a specific zulip user.
When the answer is False, this will allow the mobile app to show a
warning that push notifications will not work and the server admin
should set them up.
Based partly on Kunal's PR #7810. Provides the necessary backend API
for zulip/zulip-mobile#1507.
I got distracted, came back later to a successful test run in my
terminal, and thought I remembered finishing the change and just
kicking off a final test run to check.
In fact, there was an `assert False` right in the normal case for
production, and I just hadn't finished a test for that path. (m.-)
Definitely the most grateful I've been for our coverage checks,
which highlighted this for me.
Remove the `assert False`, and also finish writing the test it was
there to help me write. Those lines are covered now.
This is a wrapper over lru_cache function. It adds following features on
top of lru_cache:
* It will not cache result of functions with unhashable arguments.
* It will clear cache whenever zerver.lib.cache.KEY_PREFIX changes.
The fresh imported data shows that the users emails are not included
in the data. However, the data received from the older method of slack
(which is using legacy tokens) contains the email data of the users.
If some bug in Bugdown results in a rendered message content that is
bigger than twice the message size, we now just throw an exception
from Bugdown. This is considerably better than the old behavior,
which might result in an enormous message being placed in the database
(potentially, bigger than the 1MB limit to store in memcached), which
would in turn result in tragic consequences.
This fixes#8322, in that it prevents the super bad outcome seen there
(where basically Zulip became unusable for everyone on the stream
where the message is posted). Now, the failure mode is just the
message failing to send. Still not ideal (and requires further work
on the URL embed feature), but not a minor problem, not a major one.
This commit adds tests (and thus, an extra code example) for
unsubscribing another user from a particular stream by passing in
the `principals` argument to client.remove_subscriptions. The
ability to pass in `principals` was added in the latest release
of the zulip API PyPI package.
We now have a separate page for common error payloads, for example,
the payload for when the client's API key is invalid. All error
payloads that are presented on this page will be tested similarly
to our other non-error sample fixtures.
This commit adds support for passing in an argument to the macro
"call" to explicitly specify a fixture to render, like so:
{generate_code_example|doc_name|fixture(stream_message_with_args)}
api/get-all-streams - make use of the api_code_example Markdown extension's
feature of recursively extracting multiple code examples from a single
test method.
To generate a code exammple,
{generate_code_example|<api_doc_md>|example} sounds better and
more intuitive than,
{generate_code_example|<api_doc_md>|method}
This code duplicated the code in setup_realm_internal_bots, with some
added logic to avoid trying to create the same bot twice. That logic
was buggy so that it would never work at all -- it subtracted a set of
UserProfile objects from a set of email strings -- so it looked like
the command might blow up when run after the users already existed.
In fact, the buggy logic wasn't necessary, because the work the
command does after it is idempotent -- in particular `create_users`,
within its subroutine `bulk_create_users`, already filters out users
that already exist. So just cut the buggy stuff out, deduplicate the
rest with `setup_realm_internal_bots`, and document that invariant on
the latter.
While we're here, in the common case bail early without doing any
per-realm work in Python, since we're running this on every upgrade.
Users having only account in one realm will not be distracted by realm
name in subject lines of every email. Users who have multiple
accounts in realms can turn this setting on and receive a
corresponding realm name in email's subject.
Tweaked by tabbott to rebase and address a few small issues.
Fixes#5489.
For messages where the entire rendered body is a message_inline_image
object, we actually don't display any text and just display the
image. These messages may have links to images which might or might
not be internal to Zulip but in both cases there is a chance of this
links being broken when accessed by an email server like Gmail that
doesn't possess the recipient user's cookies.
We don't want to have ugly looking broken images displayed in email
notifications. So we patch this by inserting a replacement for the
`message_inline_image` block in which we essentially replace the
content with the textual link.
Edited for clarity by tabbott.
This is to break the bigger functions into smaller
ones and hence, makes unit testing easier.
Also includes renaming the stream's topic name to 'from slack'.
This fixes an issue where the user's own avatar was being sent down
the wire as None. We could have fixed it, as in #8265, by adding code
in the webapp and mobile apps to compute medium-size gravatar URLs as
well, but that would be messy, and there's little benefit to that
complexity (saving at most 2 URLs from the payload).
Fixes#8253.
This commit uses the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples to generate the
example fixture and code example, so that both are tested
in zerver/lib/api_test_helpers.
This commit uses the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples to generate the
example fixture and code example, so that both are tested
in zerver/lib/api_test_helpers.
Some of our code examples can only be run with administrator
credentials (such as create-user). Thus, the Markdown extension
for generating code examples should have an option to include
the lines that recommend using an admin zuliprc instead of a
non-admin one.
This commit uses the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples to generate the
example fixture and code example, so that both are tested
in zerver/lib/api_test_helpers.
This commit uses the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples to generate the
example fixture and code example, so that both are tested
in tools/lib/api_tests.
This commit uses the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples to generate the
example fixture and code example, so that both are tested
in tools/lib/api_tests.
This commit uses the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples to generate the
example fixture and code example, so that both are tested in
tools/lib/api_tests.
This commit uses the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples to generate the example
fixture and code example, so that both are tested in
tools/lib/api_tests.
This commit uses the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples to generate the example
fixture and code example, so that both are tested in
tools/lib/api_tests.
Now that the Markdown extension defined in
zerver/lib/bugdown/api_generate_examples depended on code in the
tools/lib/* directory, it caused the production tests to fail since
the tools/ directory wouldn't exist in a production environment.
This commit adds a Markdown extension that allows the following
syntax,
{generate_code_example|<md_file_name>|<fixture or method>}
to generate code examples and fixtures found in tools/lib/api_tests.py
and templates/zerver/api/fixtures.json, respectively.
We'll replace this primarily with per-realm quotas (plus the simple
per-file limit of settings.MAX_FILE_UPLOAD_SIZE, 25 MiB by default).
We do want per-user quotas too, but they'll need some more management
apparatus around them so an admin has a practical way to set them
differently for different users. And the error handling in this
existing code is rather confused. Just clear this feature out
entirely for now; then we'll build the per-realm version more cleanly,
and then we can later add back per-realm quotas modelled after that.
The migration to actually remove the field is in a subsequent commit.
Based in part on work by Vishnu Ks (hackerkid).
In order to get test coverage on topic name checks, we
do them in Addressee, so that we don't hit an assertion
first. The assertion in question is in Addressee.topic(),
and it was added partly to appease mypy.
Previously we had a problem of id clashes while importing converted
slack data into an existing zulip instance with realms which are actively
populating the database.
This counts the total objects to be imported and does a db transaction
to increase the SEQUENCE number for that table by that number,
and hence allocates a range of ids for the to be converted slack data
objects.
Adds a check for newline that was present on backend, but missing in the
frontend markdown implementation. Updating messages uses is_me_message flag
received from server instead of its own partial test. Similarly, rendering
previews uses markdown code.
Fixes#6493.
This is the first step for allowing users
to edit a bot's service entries, name the
outgoing webhook configuration entries. The
chosen data structures allow for a future
with multiple services per bot; right now,
only one service per bot is supported.
This is responsible for:
1.) Handling all the incoming requests at the
messages endpoint which have defer param set. This is similar to
send_message_backend apart from the fact that instead of really
sending a message it schedules one to be sent later on.
2.) Does some preliminary checks such as validating timestamp for
scheduling a message, prevent scheduling a message in past, ensure
correct format of message to be scheduled.
3.) Extracts time of scheduled delivery from message.
4.) Add tests for the newly introduced function.
5.) timezone: Add get_timezone() to obtain tz object from string.
This helps in obtaining a timezone (tz) object from a timezone
specified as a string. This string needs to be a pytz lib defined
timezone string which we use to specify local timezones of the
users.
This code takes care of the environment running Python 3.4 when
test label is passed directly to the test-backend command:
./tools/test-backend test_alert_words
This also amends a commit from Brock Whittaker <brock@zulipchat.com>
that merges two separate functions for YouTube videos and Vimeo videos
into a generic video recall function.
Fixes#7550.
We add two functions:
1.) check_schedule_message(): This function is responsible for
doing the essential initial checkes to verify the validity of
the message. These checkes include things like if user is
allowed to send messages to some stream or not or if the user is
a super_user. All this is basically done by further calling
check_message() with appropriate parameters. This is on the same
lines as is check_send_message().
2.) do_schedule_messages(): This function is responsible for
creating ScheduleMessage table rows for a list of messages that
are to be scheduled. This basically accumulates the ScheduleMessage
objects in a list and then bulk creates the rows.
This adds UI fields in the bot settings for specifying
configuration values like API keys for a bot. The names
and placeholder values for each bot's config fields are
fetched from the bot's <bot>.conf template file in the
zulip_bots package. This also adds giphy and followup
as embedded bots.
* For strikethrough formatting: Slack's '~strike~' to Zulip's '~~strike~~'.
* For bold formatting: Slack's '*bold*' to Zulip's '**bold**'.
* For italic formatting: Slack's '_italic_' to Zulip's '*italic*'.
* For mentioning formatting: Slack's <@slack_id|short_name> to Zulip's @**full_name**.
* Checking links.
load_bot_config_template(bot) parses the <bot>.conf
template file, which can be found in the zulip_bots
package for each bot. It then returns the INI content
of that file as a dict.
Currently the zip file is extracted to the root of
zulip directory no matter where the the zip file.
The extracted data is not useful after running the command
which pollutes the zulip directory. It make more sense to
extract it to the same directory of zip file especially
when the zip file gets downloaded to /temp like in the tests.
This commit adds a setting to limit creation of generic bots
to admins for realms that want that restriction. (Generic
bots, apart from being considered spammy on some realms,
have less locked down permissions than webhook bots).
Fixes#7066.
We no longer have a special UI setting and model
field ("emoji_alt_code") for saying users want text-only
emojis. We now instead make "text" be a fifth choice
for "emojiset".
Fixes#7406
This commit does the following:
* Move the Arguments table data from stream-message.md and
private-message.md to a JSON file.
* Add a Markdown extension that allows one to include and render
a table from a JSON file like so:
{generate_arguments_table|arguments.json|private-stream.md}
* Use Bootstrap's .table class to format the table instead of
relying on custom CSS.
This uses the correct regex for strikethrough. Also, added
a test to make sure that strikethrough works when it contains
link with whitespace.
Fixes#7596.
When I added this "Deployed code" feature to the error reporting,
I apparently hadn't worked out enough of how this code works to
realize that `notify_server_error` may be in a different process,
at a different time and potentially even on a different machine
from the actual error being reported.
Given that architecture, all the data about the error must be computed
in `AdminNotifyHandler`, before sending the report through the queue,
or else it risks being wrong. The job of `notify_server_error` and
friends is only to format the data and send it off. So, move the
implementation of this feature in order to do that.
(@showell added some "nocoverage" directives here for code that
is hard to test (exceptions being thrown, deployment files not
existing) and that was originally part of a file that didn't
require 100% coverage)
This helps prevent them from diverging and getting different sets of
features and fixes. As a bonus, the email path gets a nice tweak that
the Zulip path has had for years, since f7f2ec0ac, which makes the
emails clearer and less broken-looking when logging a message with no
stack trace.
This name hasn't been right since f7f2ec0ac back in 2013; this handler
sends the log record to a queue, whose consumer will not only maybe
send a Zulip message but definitely send an email. I found this
pretty confusing when I first worked on this logging code and was
looking for how exception emails got sent; so now that I see exactly
what's actually happening here, fix it.
This is just a basic Dropbox webhook integration. It just
notifies a user when something has changed, it does not
specify what changed. Doing so would require storing data,
as Dropbox API was created mainly for file managers, not
integrations like this.
Closes#5672
Rhea Parekh
Tim Abbott
Vishnu Ks
neiljp (Neil Pilgrim)
YJDave
Ricky
Harshit Bansal
Shubham Dhama
Robert Hönig
Eeshan Garg
Shubham Padia
Aditya Bansal
Yago González
Marco Burstein
Archana BS
Umair Khan
Greg Price
rht
Alena Volkova
Aastha Gupta
nyan-salmon
Steve Howell
Roman Godov
Privisus
Rohitt Vashishtha
Patrick Grave
Weronika Grzybowska
fredfishgames
Shreyansh Dwivedi
Viraat Chandra
Xavier Cooney
Andy Perez
infinitelooped
akashnimare
Kiy4h
greysome
Angelika Serwa
Tommy Ip