Note that django_stubs_ext is required to be placed within common.in
because we need the monkeypatched types in runtime; django-stubs
itself is for type checking only.
In the future, we would like to pin to a release instead of a git
revision, but several patches we've contributed upstream have not
appeared in a release yet.
We also remove the type annotation for RealmAuditLog.event_last_message_id
here instead of earlier because type checking fails otherwise.
Fixes#11560.
This breaks an import cycle that prevented django-stubs from inferring
types for django.conf.settings.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This breaks an import cycle that prevented django-stubs from inferring
types for django.conf.settings.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This breaks an import cycle that prevented django-stubs from inferring
types for django.conf.settings.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This breaks an import cycle that prevented django-stubs from inferring
types for django.conf.settings.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This breaks an import cycle that prevented django-stubs from inferring
types for django.conf.settings.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This commit brings AzureAD config in line with other backends:
- SOCIAL_AUTH_AZUREAD_OAUTH2_SECRET gets fetched in computed_settings.py
instead of default_settings, consistent with github/gitlab/etc.
- SOCIAL_AUTH_AZUREAD_OAUTH2_KEY gets fetched in default_settings via
get_secret(..., development_only=True) like other social backends, to
allow easier set up in dev environment, in the dev-secrets.conf file.
- The secret gets renamed from azure_oauth2_secret to
social_auth_azuread_oauth2_secret to have a consistent naming scheme with
other social backends and with the SOCIAL_AUTH_AZUREAD_OAUTH2_KEY
name. This is backwards-incompatible.
The instructions for setting it up are updated to fit how this is
currently done in AzureAD.
Creates `zerver.lib.url_redirects.py` to record old and new URLs
for documentation pages that have been renamed/moved and need URL
redirects.
This file is then used by `zproject.urls.py` to redirect links and
by `zerver.test.test_urls.py` to test that all of the old URLs
return a success response with a common page header/text depending
on the type of redirect (help center, policy, or API).
Adds a section to contributor docs on writing documentation for
how to use this redirect system when renaming a help center or api
documentation page.
Fixes#21946. Fixes#17897.
Django has always expected this, but Django 4.0 added a system check
that spews warnings in production.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Technically Django already makes SECRET_KEY mandatory by raising an
ImproperlyConfigured exception when it is not set. We use the
get_mandatory_secret helper here so that we have a narrower type.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This also allows us to remove some assertions as we now know that
AVATAR_SALT will never be None.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This implements get_mandatory_secret that ensures SHARED_SECRET is
set when we hit zerver.decorator.authenticate_notify. To avoid getting
ZulipSettingsError when setting up the secrets, we set an environment
variable DISABLE_MANDATORY_SECRET_CHECK to skip the check and default
its value to an empty string.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
The only caller that passes the kwargs argument is the avatar rest_path.
The application of kwargs can be rewritten with a wrapper.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Mypy previously infers this to be `List[URLPattern]` which is
incompatible with other urls lists that we concatenate this with.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This refactors rate limit related functions from `zerver.decorator` to
zerver.lib.rate_limiter.
We conditionally import `RemoteZulipServer`, `RequestNotes`, and
`RateLimitedRemoteZulipServer` to avoid circular dependency.
Most instances of importing these functions from `zerver.decorator` got
updated, with a few exceptions in `zerver.tests.test_decorators`, where
we do want to mock the rate limiting functions imported in
`zerver.decorator`. The same goes with the mocking example in the
"testing-with-django" documentation.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Adds an API endpoint for accessing read receipts for other users, as
well as a modal UI for displaying that information.
Enables the previously merged privacy settings UI for managing whether
a user makes read receipts data available to other users.
Documentation is pending, and we'll likely want to link to the
documentation with help_settings_link once it is complete.
Fixes#3618.
Co-authored-by: Tim Abbott <tabbott@zulip.com>
BACKEND_DATABASE_TEMPLATE was introduced in a507a47778.
This setting is only available for the test cases and it is not that
necessary to have it configurable.
We define it as a global variable in zerver.lib.test_fixtures.
This avoids requiring mypy_django_plugin to know the type of
settings.BACKEND_DATABASE_TEMPLATE for type checking purposes, given the fact
that settings.test_extra_settings is not available in production/development
setup.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This ensures that CAMO_KEY is always defined, so that mypy_django_plugin
will be able to identify its type.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
The presence of `auto_signup` in idp_settings_dict in the test case
test_social_auth_registration_auto_signup is incompatible with the
previous type annotation of SOCIAL_AUTH_OIDC_ENABLED_IDPS, where `bool`
is not allowed.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Now that we can assume Python 3.6+, we can use the
email.headerregistry module to replace hacky manual email address
parsing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The base class has the methods to accept `Sequence` of `EmailMessage`.
Because our implementation in fact only supports `EmailMultiAlternatives`,
isinstance checks with assertions need to be added along with the
signature change.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This check was added for a legacy implementation of the GitHub integration in
bb6d189fa8,
which later got removed in
a73e8109b7.
No other webhook integration can now have a Falsy `url_object` attribute.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
We fixed the case when handling `JITSI_SERVER_URL` being `None`, but the
type annotation didn't get updated along with the fix
2f9d4f5a96
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Type inference does not work when the default value of `REQ` is
non-optional while `ResultT` is optional. Mypy tries to unify
`json_validator` with `Validator[int]` in `invite_users_backend` instead
of the desired `Validator[Optional[int]]` because of the presence of the
default value `settings.INVITATION_LINK_VALIDITY_MINUTES`, which is
inferred to be an `int`. Mypy does not resort to a less specific type but
instead gives up early.
This issue applies to invite_users_backend and generate_multiuse_invite_backend
in zerver.views.invite.
There might be a way that we can add an overload to get around this, but
it's probably not worth the complexity until it comes up again more frequently.
We do in fact allow `invite_expires_in_minutes` to be `None` in places
like `do_invite_users`, `invite_users_backend`, etc, and we have
`settings.INVITATION_LINK_VALIDITY_MINUTES` as the default for them. So
it makes sense to allow having an optional value for this setting. And
since there isn't a way to independently set the value of this constant,
we move it to a different place.
TODO:
This is a temporary fix that should be refactored when the bug is fixed.
The encountered mypy issue: https://github.com/python/mypy/issues/13234
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
django-stubs dynamically collects the type annotation for us from the
settings, acknowledging mypy that `HOME_NOT_LOGGED_IN` is an
`Optional[str]`. Type narrowing with assertions does not play well with
the default value of the decorator, so we define the same setting
variable with a different name as `CUSTOM_HOME_NOT_LOGGED_IN` to bypass
this restriction.
Filed python/mypy#13087 to track this issue.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
Similar to the previous commit, we should access request.user only
after it has been initialized, rather than having awkward hasattr
checks.
With updates to the settings comments about LogRequests by tabbott.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
`request.user` gets set in Django's `AuthenticationMiddleware`, which
runs after our `HostDomainMiddleware`.
This makes `hasattr` checks necessary in any code path that uses the
`request.user` attribute. In this case, there are functions in
`context_processors` that get called in the middleware.
Since neither `CsrfMiddleware` nor `HostDomainMiddleware` are required
to run before `AuthenticationMiddleware`, moving it two slots up in
`computed_settings` is sufficient to avoid the `hasattr` checks.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
If the emoji name contains forward slashes, the `str` converter
would treat it as a URL delimiter. Instead use the path converter, so
that forward slashes are included in the emoji name variable.
Fixes#22377
In zliencer.management.commands.populate_db, we assign the value of
settings.CACHES["default"] to `default_cache`.
django-stubs infers `settings.CACHES` to be `Dict[str, object]`. We make
the type specific enough so that we can access `default_cache` as a
dict.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This is necessary for the mobile/terminal clients to build spectator
support down the line. We'll also be using it for the web application,
in an upcoming commit.
This was added in 1fded25025, and is not
necessary for standard Zulip installs. While both Host: and
X-Forwarded-Host: are nominally untrusted, there is no reason to
complicate the deployment by defaulting it on.
We want to avoid logging this kind of potentially sensitive information.
Instead, it's more useful to log ids of the matching accounts on
different subdomains.
Previously, this command would reliably fail:
```
tools/test-backend --skip-provision-check --parallel=3
zerver.tests.test_email_log.EmailLogTest.test_forward_address_details
zerver.tests.test_email_log.EmailLogTest.test_generate_and_clear_email_log
zerver.tests.test_example.TestDevelopmentEmailsLog
```
and now it reliably succeeds. :-)
After hours of fiddling/googling/hair-tearing, I found that
mocking-away Django Connection.send_messages() was the best:
- We're testing Zulip and not Django.
- Mocking at this lower level exercises more of our code.
- EmailLogBackEnd._do_send_messages() helper method added to simplify mocking.
Fixes#21925.
We previously forked tornado.autoreload to work around a problem where
it would crash if you introduce a syntax error and not recover if you
fix it (https://github.com/tornadoweb/tornado/issues/2398).
A much more maintainable workaround for that issue, at least in
current Tornado, is to use tornado.autoreload as the main module.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This commit adds 'GET /user_groups/{user_group_id}/members'
endpoint to get members of a user group. "direct_member_only"
parameter can be passed as True to the endpoint to get only
direct members of the user group and not the members of
subgroup.
This commit adds 'GET /user_groups/{id}/members/{id}' endpoint to check
whether a user is member of a group.
This commit also adds for_read parameter to access_user_group_by_id,
which if passed as True will provide access to read user group even
if it a system group or if non-admin acting user is not part of the
group.
This commit changes the invite API to accept invitation
expiration time in minutes since we are going to add a
custom option in further commits which would allow a user
to set expiration time in minutes, hours and weeks as well.
This comment was _originally_ for the `default` memcached cache, back
when it was added all of the way back in 0a84d7ac62. 9e64750083
made it a lie, and edc718951c made it even more confusing when it
removed the `default` cache configuration block, leaving the wrong
comment next to the wrong cache configuration block.
Banish the comment.
This cache was added in da33b72848 to serve as a replacement for the
durable database cache, in development; the previous commit has
switched that to be the non-durable memcached backend.
The special-case for "in-memory" in development is mostly-unnecessary
in contrast to memcached -- `./tools/run-dev.py` flushes memcached on
every startup. This differs in behaviour slightly, in that if the
codepath is changed and `run-dev` restarts Django, the cache is not
cleared. This seems an unlikely occurrence, however, and the code
cleanup from its removal is worth it.
Failure to pull the default "zulip" value here can lead to
accidentally applying a `postgres_password` value which is unnecessary
and may never work.
For consistency, always skip password auth attempts for the "zulip"
user on localhost, even if the password is set. This mirrors the
behavior of `process_fts_updates`.
When the credentials are provided by dint of being run on an EC2
instance with an assigned Role, we must be able to fetch the instance
metadata from IMDS -- which is precisely the type of internal-IP
request that Smokescreen denies.
While botocore supports a `proxies` argument to the `Config` object,
this is not actually respected when making the IMDS queries; only the
environment variables are read from. See
https://github.com/boto/botocore/issues/2644
As such, implement S3_SKIP_PROXY by monkey-patching the
`botocore.utils.should_bypass_proxies` function, to allow requests to
IMDS to be made without Smokescreen impeding them.
Fixes#20715.
The flow seems to have changed a bit since these instructions were last
updated. Also information on which scopes needs to be authorized was
missing, which takes a bit of effort to figure and thus should be
written out explicitly.
This will make it convenient to add a handful of organizations to the
beta of this feature during its first few weeks to try to catch bugs,
before we open it to everyone in Zulip Cloud.
A recent Postgres upstream release appears to have broken PGroonga.
While we wait for https://github.com/pgroonga/pgroonga/issues/203 to
be resolved, disable PGroonga in our automated tests so that Zulip
CI passes.
The new release adds the commit:
20ac22b96d
Which allows us to get rid of the entire ugly override that was needed
to do this commit's job in our code. What we do here in this commit:
* Use django-scim2 0.17.1
* Revert the relevant parts of f5a65846a8
* Adjust the expected error message in test_exception_details_not_revealed_to_client
since the message thrown by django-scim2 in this release is slightly
different.
We do not have to add anything to set EXPOSE_SCIM_EXCEPTIONS, since
django-scim2 uses False as the default, which is what we want - and we
have the aforementioned test verifying that indeed information doesn't
get revealed to the SCIM client.
It’s built in to Jinja2 as of 2.9. Fixes “DeprecationWarning: The
'autoescape' extension is deprecated and will be removed in Jinja
3.1. This is built in now.”
Signed-off-by: Anders Kaseorg <anders@zulip.com>
We recently ran into a payload in production that didn't contain
an event type at all. A payload where we can't figure out the event
type is quite rare. Instead of letting these payloads run amok, we
should raise a more informative exception for such unusual payloads.
If we encounter too many of these, then we can choose to conduct a
deeper investigation on a case-by-case basis.
With some changes by Tim Abbott.
This replaces the TERMS_OF_SERVICE and PRIVACY_POLICY settings with
just a POLICIES_DIRECTORY setting, in order to support settings (like
Zulip Cloud) where there's more policies than just those two.
With minor changes by Eeshan Garg.
We do s/TOS/TERMS_OF_SERVICE/ on the name, and while we're at it,
remove the assumed zerver/ namespace for the template, which isn't
correct -- Zulip Cloud related content should be in the corporate/
directory.
Having wantMessagesSigned=True globally means that it's also applied by
python3-saml to regular authentication SAMLResponses - making it require
the response to be signed, which is an issue because a feasible
alternative way that some IdPs (e.g. AzureAD) take by default is to sign
specifically the assertions in the SAMLResponse. This is also secure,
and thus we generally want to accept it.
Without this, the setting of wantMessagesSigned=True globally
in 4105ccdb17 causes a
regression for deployments that have already set up SAML with providers
such as AzureAD, making Zulip stop accepting the SAMLResponses.
Testing that this new logic works is handled by
test_saml_idp_initiated_logout_invalid_signature, which verifies that a
LogoutRequest without signature will be rejected.
A confirmation link takes a user to the check_prereg_key_and_redirect
endpoint, before getting redirected to POST to /accounts/register/. The
problem was that validation was happening in the check_prereg_key_and_redirect
part and not in /accounts/register/ - meaning that one could submit an
expired confirmation key and be able to register.
We fix this by moving validation into /accouts/register/.
The warning was fixed in python-jose 3.3.0, which we pulled in with
commit 61e1e38a00 (#18705).
This reverts commit 1df725e6f1 (#18567).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
We had an incident where someone didn't notice for a week that they'd
accidentally enabled a 30-day message retention policy, and thus we
were unable to restore the deleted the content.
After some review of what other products do (E.g. Dropbox preserves
things in a restoreable state for 30 days) we're adjusting this
setting's default value to be substantially longer, to give more time
for users to notice their mistake and correct it before data is
irrevocably deleted.
TOR users are legitimate users of the system; however, that system can
also be used for abuse -- specifically, by evading IP-based
rate-limiting.
For the purposes of IP-based rate-limiting, add a
RATE_LIMIT_TOR_TOGETHER flag, defaulting to false, which lumps all
requests from TOR exit nodes into the same bucket. This may allow a
TOR user to deny other TOR users access to the find-my-account and
new-realm endpoints, but this is a low cost for cutting off a
significant potential abuse vector.
If enabled, the list of TOR exit nodes is fetched from their public
endpoint once per hour, via a cron job, and cached on disk. Django
processes load this data from disk, and cache it in memcached.
Requests are spared from the burden of checking disk on failure via a
circuitbreaker, which trips of there are two failures in a row, and
only begins trying again after 10 minutes.
Using these tuples is clearly uglier than using classes for storing
these encoded stream. This can be built on further to implement the
various fiddly logic around handling these objects inside appropriate
class method.
This increases the possible maximum wait time to send exceptions
during shutdown. The larger value makes it possible to send larger
exceptions, and weather larger network hiccups, during shutdown. In
instances where a service is crash-looping, it is already not serving
requests reliably, and better ensuring those exceptions are captured
is of significant value.
Previously, our codebase contained links to various versions of the
Django docs, eg https://docs.djangoproject.com/en/1.8/ref/
request-response/#django.http.HttpRequest and https://
docs.djangoproject.com/en/2.2/ref/settings/#std:setting-SERVER_EMAIL
opening a link to a doc with an outdated Django version would show a
warning "This document is for an insecure version of Django that is no
longer supported. Please upgrade to a newer release!".
Most of these links are inside comments.
Following the replacement of these links in our docs, this commit uses
a search with the regex "docs.djangoproject.com/en/([0-9].[0-9]*)/"
and replaces all matches with "docs.djangoproject.com/en/3.2/".
All the new links in this commit have been generated by the above
replace and each link has then been manually checked to ensure that
(1) the page still exists and has not been moved to a new location
(and it has been found that no page has been moved like this), (2)
that the anchor that we're linking to has not been changed (and it has
been found that no anchor has been changed like this).
One comment where we mentioned a Django version in text before linking
to a page for that version has also been changed, the comment
mentioned the specific version when a change happened, and the history
is no longer relevant to us.
This more closely matches email_change_by_user and
password_reset_form_by_email limits; legitimate users are unlikely to
need to send more than 5 emails to themselves during a day.
Both `create_realm_by_ip` and `find_account_by_ip` send emails to
arbitrary email addresses, and as such can be used to spam users.
Lump their IP rate limits into the same bucket; most legitimate users
will likely not be using both of these endpoints at similar times.
The rate is set at 5 in 30 minutes, the more quickly-restrictive of
the two previous rates.
If realm is web_public, spectators can now view avatar of other
users.
There is a special exception we had to introduce in rest model to
allow `/avatar` type of urls for `anonymous` access, because they
don't have the /api/v1 prefix.
Fixes#19838.
As detailed in the comments, the default behavior is undesirable for us
because we can't really predict all possibilities of exceptions that may
be raised - and thus putting str(e) in the http response is potentially
insecure as it may leak some unexpected sensitive information that was
in the exception.
As a hypothetical example - KeyError resulting from some buggy
some_dict[secret_string] call would leak information. Though of course
we aim to never write code like that.
None of the existing custom profile field types have the value as an
integer like declared in many places - nor is it a string like currently
decalred in types.py. The correct type is Union[str, List[int]]. Rather
than tracking this in so many places throughout the codebase, we add a
new ProfileDataElementValue type and insert it where appropriate.
This new setting both serves as a guard to allow us to merge API
support for web public streams to main before we're ready for this
feature to be available on Zulip Cloud, and also long term will
protect self-hosted servers from accidentally enabling web-public
streams (which could be a scary possibility for the administrators of
a corporate Zulip server).
Fixes#17456.
The main tricky part has to do with what values the attribute should
have. LDAP defines a Boolean as
Boolean = "TRUE" / "FALSE"
so ideally we'd always see exactly those values. However,
although the issue is now marked as resolved, the discussion in
https://pagure.io/freeipa/issue/1259 shows how this may not always be
respected - meaning it makes sense for us to be more liberal in
interpreting these values.
This better matches the title of the page and more generally our
conventions around naming /help/ articles. We include a redirect
because this is referenced from Welcome Bot messages, and we
definitely don't want those links to break.
AuthnContextClassRef tells the IdP what forms of authentication the user
should use on the IdP's server for us to be okay with it. I don't think
there's a reason for us to enforce anything here and it should be up to
the IdP's configuration to handle authentication how it wants.
The default AuthnContextClassRef only allows PasswordProtectedTransport,
causing the IdP to e.g. reject authentication with Yubikey in AzureAD
SAML - which can be confusing for folks setting up SAML and is just not
necessary.
The previous commit introduced logging of attempts for username+password
backends. For completeness, we should log, in the same format,
successful attempts via social auth backends.
These details are useful to log. This only makes sense for some auth
backends, namely email and ldap backends, because other backends are
"external" in the sense that they happen at some external provider's
server (Google, SAML IdP etc.) so the failure also happens there and we
don't get useful information about what happened.
SOCIAL_AUTH_SUBDOMAIN was potentially very confusing when opened by a
user, as it had various Login/Signup buttons as if there was a realm on
it. Instead, we want to display a more informative page to the user
telling them they shouldn't even be there. If possible, we just redirect
them to the realm they most likely came from.
To make this possible, we have to exclude the subdomain from
ROOT_SUBDOMAIN_ALIASES - so that we can give it special behavior.
This utilizes the generic `BaseNotes` we added for multipurpose
patching. With this migration as an example, we can further support
more types of notes to replace the monkey-patching approach we have used
throughout the codebase for type safety.
Till now, we've been forking django-auth-ldap at
https://github.com/zulip/django-auth-ldap to put the
LDAPReverseEmailSearch feature in it, hoping to get it merged
upstream in https://github.com/django-auth-ldap/django-auth-ldap/pull/150
The efforts to get it merged have stalled for now however and we don't
want to be on the fork forever, so this commit puts the email search
feature as a clumsy workaround inside our codebase and switches to using
the latest upstream release instead of the fork.
This fixes error found with django-stubs and it is a part of #18777.
Note that there are various remaining errors that need to be fixed in
upstream or elsewhere in our codebase.
Closes#19287
This endpoint allows submitting multiple addresses so we need to "weigh"
the rate limit more heavily the more emails are submitted. Clearly e.g.
a request triggering emails to 2 addresses should weigh twice as much as
a request doing that for just 1 address.
These were added at some point in the past, but were not complete, and
it makes sense to document the current feature level as and when they
become available, since clients should not use the drafts endpoints on
older feature levels.
This removes a bunch of non-functional duplicate JavaScript, HTML, and
CSS that was interfering with maintenance on the functional originals,
because it was never clear how to update the duplicates or how to
check that you’d updated the duplicates correctly.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The code didn't account for existence of SOCIAL_AUTH_SUBDOMAIN. So the
redirects would happen to endpoints on the SOCIAL_AUTH_SUBDOMAIN, which
is incorrect. The redirects should happen to the realm from which the
user came.
These modern landing pages cover use cases previously not detailed on
our website. Technically, we had a /for/research page before, but it
wasn't finished or linked everywhere.
Removed "function-url-quotes" stylelint rule
since I need to use quotes in url to use an
svg as list bullet point. There are spacing issues
using it as an image. Also, using quotes in url
is actually the recommended way to do it otherwise
there could be issue with escaping.
There might be good reasons to have other external authentication
methods such as SAML configured, but none of them is available.
This happens, for example, when you have enabled SAML so that Zulip is
able to generate the metadata in XML format, but you haven't
configured an IdP yet. This commit makes sure that the phrase _OR_ is
only shown on the login/account page when there are actually other
authentication methods available. When they are just configured, but
not available yet, the page looks like as if no external
authentication methods are be configured.
We achieve this by deleting any_social_backend_enabled, which was very
similar to page_params.external_authentication_methods, which
correctly has one entry per configured SAML IdP.
This API change removes unnecessary complexity from a client that
wants to change a user's personal settings, and also saves developers
from needing to make decisions about what sort of setting something is
at the API level.
We preserve the old settings endpoints as mapping to the same function
as the new one for backwards-compatibility. We delete the
documentation for the old endpoints, though the documentation for the
merged /settings endpoint mentions how to use the old endpoints when
needed.
We migrate all backend tests to the new endpoints, except for
individual tests for each legacy endpoint to verify they still work.
Co-authored-by: sahil839 <sahilbatra839@gmail.com>
This fixes an issue where update-prod-static would crash with the following exception:
2021-07-19 03:59:24,601 upgrade-zulip-stage-2: Building static assets...
Traceback (most recent call last):
File "./tools/update-prod-static", line 27, in <module>
os.chdir(settings.DEPLOY_ROOT)
File "/home/zulip/deployments/2021-07-19-03-58-39/zulip-py3-venv/lib/python3.6/site-packages/django/conf/__init__.py", line 82, in __getattr__
self._setup(name)
File "/home/zulip/deployments/2021-07-19-03-58-39/zulip-py3-venv/lib/python3.6/site-packages/django/conf/__init__.py", line 69, in _setup
self._wrapped = Settings(settings_module)
File "/home/zulip/deployments/2021-07-19-03-58-39/zulip-py3-venv/lib/python3.6/site-packages/django/conf/__init__.py", line 170, in __init__
mod = importlib.import_module(self.SETTINGS_MODULE)
File "/usr/lib/python3.6/importlib/__init__.py", line 126, in import_module
return _bootstrap._gcd_import(name[level:], package, level)
File "<frozen importlib._bootstrap>", line 994, in _gcd_import
File "<frozen importlib._bootstrap>", line 971, in _find_and_load
File "<frozen importlib._bootstrap>", line 955, in _find_and_load_unlocked
File "<frozen importlib._bootstrap>", line 665, in _load_unlocked
File "<frozen importlib._bootstrap_external>", line 678, in exec_module
File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
File "./tools/../zproject/settings.py", line 20, in <module>
from .computed_settings import * # noqa: F401,F403 isort: skip
File "./tools/../zproject/computed_settings.py", line 1186, in <module>
from .sentry import setup_sentry
File "./tools/../zproject/sentry.py", line 12, in <module>
from zerver.lib.request import get_request_notes
File "./tools/../zerver/lib/request.py", line 28, in <module>
import zerver.lib.rate_limiter as rate_limiter
File "./tools/../zerver/lib/rate_limiter.py", line 14, in <module>
from zerver.models import UserProfile
File "./tools/../zerver/models.py", line 26, in <module>
from django.contrib.auth.models import AbstractBaseUser, PermissionsMixin, UserManager
File "/home/zulip/deployments/2021-07-19-03-58-39/zulip-py3-venv/lib/python3.6/site-packages/django/contrib/auth/models.py", line 3, in <module>
from django.contrib.auth.base_user import AbstractBaseUser, BaseUserManager
File "/home/zulip/deployments/2021-07-19-03-58-39/zulip-py3-venv/lib/python3.6/site-packages/django/contrib/auth/base_user.py", line 48, in <module>
class AbstractBaseUser(models.Model):
File "/home/zulip/deployments/2021-07-19-03-58-39/zulip-py3-venv/lib/python3.6/site-packages/django/db/models/base.py", line 108, in __new__
app_config = apps.get_containing_app_config(module)
File "/home/zulip/deployments/2021-07-19-03-58-39/zulip-py3-venv/lib/python3.6/site-packages/django/apps/registry.py", line 253, in get_containing_app_config
self.check_apps_ready()
File "/home/zulip/deployments/2021-07-19-03-58-39/zulip-py3-venv/lib/python3.6/site-packages/django/apps/registry.py", line 136, in check_apps_ready
raise AppRegistryNotReady("Apps aren't loaded yet.")
django.core.exceptions.AppRegistryNotReady: Apps aren't loaded yet.
Traceback (most recent call last):
File "/home/zulip/deployments/2021-07-19-03-58-39/scripts/lib/upgrade-zulip-stage-2", line 220, in <module>
subprocess.check_call(["./tools/update-prod-static"], preexec_fn=su_to_zulip)
File "/usr/lib/python3.6/subprocess.py", line 311, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['./tools/update-prod-static']' returned non-zero exit status 1.
This allows for greater flexibility in values for "environment," and
avoids having to have duplicate definitions of STAGING in
`zproject/config.py` and `zproject/default_settings.py` (due to import
order restrictions).
It does overload the "deploy type" concept somewhat.
Follow-up to #19185.
This concludes the HttpRequest migration to eliminate arbitrary
attributes (except private ones that are belong to django) attached
to the request object during runtime and migrated them to a
separate data structure dedicated for the purpose of adding
information (so called notes) to a HttpRequest.
We will no longer use the HttpRequest to store the rate limit data.
Using ZulipRequestNotes, we can access rate_limit and ratelimits_applied
with type hints support. We also save the process of initializing
ratelimits_applied by giving it a default value.
If the user is logged in, we'll stick to rate limiting by the
UserProfile. In case of requests without authentication, we'll apply the
same limits but to the IP address.
Running notify_server_error directly from the logging handler can lead
to database queries running in a random context. Among the many
potential problems that could cause, one actual problem is a
SynchronousOnlyOperation exception when running in an asyncio event
loop.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
* Move content on moving topics between streams to a dedicated
article. We advertise it as "move content" to hint that one can move
messages or split topics, and link to it.
* This deletes change-the-topic-of-a-message, because the same content
is already covered in rename-a-topic.
* This commit mostly just moves content between articles. Most of that
content was redundant with the first few paragraphs of the surviving
"rename a topic" article. The former "This is useful for" se ntence
was adapted to the remaining article.
* This commit also adds a redirect for the removed article, and
updates related links.
Anders Kaseorg
PIG208
Mateusz Mandera
Lauryn Menard
Zixuan James Li
Aman Agrawal
Dinesh
Ganesh Pawar
Tim Abbott
Sahil Batra
Alex Vandiver
Alya Abbott
Adam Sah
Raghav Luthra
Eeshan Garg
Tim Abbott
YashRE42
rht
Mateusz Mandera
Hemanth V. Alluri
sahil839
Erik Tews
Damian Parrino