We have moved our invalid timestamp logic to use timestamp-error class,
however, if there are any valid outputs by the backend markdown that
the frontend considers invalid, we want to debug them. This commit
adds tooling to ensure we log those error messages.
We had been using !time() syntax for timestamps so far. Since its
an unreleased feature, we can make changes without affecting many
people.
Fixes#15442.
There is a bug and race issue that occurs when a message is selected
while we are in the process of reifying a locally echoed message,
raising the "Selected message id not in MessageList" error.
The code flow to get the exception is as follows:
* A user sends a message to the current narrow we are in.
* Before the new message event is received, we sent a message to
the same message list which renders it with a locally echoed id.
* One of the ways of getting the exception is to already have the
locally sent message selected, before receiving an acknowledgment
from the server.
* Thus the Message List Data's `selected_id` now points to the new
message id. The exception is raised on entering the `was_selected`
if block inside `message_list_view` which tries to re-select the
message.
Updating the `_rerender_message` code for this special case won't fix
the entire bug because, as mentioned above there are other ways of
getting the exception:
Ideally, after all our synchronous work (`echo.process_from_server`)
has completed we would expect the re-order and re-render work of the
`change_message_id` would occur first, due to the timer of the
setTimeout being set to 0.
However as evident from the race condition existing, this isn't always
the case. `change_message_id` function is responsible for 3 things:
updation, re-ordering and re-rendering.
The first one which is responsible for updating the message list's
local cache, occurs synchronously while for the latter two, they both
occur asynchronously.
Before the setTimeout which is responsible for the latter two actions,
is encountered the user might select the message by clicking or more
commonly by scrolling, which causes this message selection event to be
ahead of the setTimeout in the callback queue.
During this time frame, our race condition takes place.
And even though the message id is updated it's Message List is not
in the correct sort order, which leads to `closest_id` !== `id` in
`MessageList_select_id` being true and raising the exception.
Now, we only asynchronously call the re_render function, to guarantee
the data is always correct and UI updates should be done at the end.
Extended by tabbott to comment the setTimeout call.
Fixes#15346.
We change validate_stream_message to check the existence of stream from
the stream name in compose box early and we then pass stream_id or the
obtained sub objects accordingly to other validate functions.
Passing stream_id or sub objects to these functions, enables us to use
stream_id instead of stream name in stream_data.get_subscriber_count.
stream_data.get_stream_post_policy is also removed as we only used it in
validate_stream_message_policy, but we do not need it now as we can get
stream_post_policy directly from sub object obtained by early check of
valid stream name.
This commits add data-stream-id attribute to the compose_invite_users
template. This helps in avoiding the error that occured if user
clicked the link after renaming of stream.
As a result of above changes, the checks for empty and invalid stream
name in compose box are done in warn_if_mentioning_unsubscribed_user
function instead of needs_subscribe_warning function.
Escape all the possible special characters.
We replaced \b with (?:^|\s) since it matches word boundries including
special characters.
Pasted relevant stackoverflow links which expain them properly.
The organization_settings_tip is not visible if organization settings
overlay is opened with any section other than organization profile,
settings and permissions. This is because insert_tip_box is called from
settings_org.build_page, which is called only when we open any of the
above three sections after opening the overlay and not others.
We should call insert_tip_box function from admin.build_page instead
of settings_org.build_page because we need to insert the admin tips
each time the organization settings overlay is opened, irrespective
of the section which opens first.
The function insert_tip_box is moved to admin.js from settings_org.js,
because settings_org.js file handles the organization profile,
settings and permissions page only, while we display the tips in many
other sections including bots, custom emoji, etc.
Thus, it makes sense to move insert_tip_box function to admin.js, which
renders the complete organization settings overlay using render_admin_tab.
The flake was caused due to the fact that current_msg_list was not
populated with any messages in rare cases. We were missing a check
to guard against current message list having no messages. The
failure screenshot show no messages to prove this.
Relevant error:
Evaluation failed: TypeError: Cannot read property 'raw_content' of undefined
We leverage the composebox typeaheads to show flatpickr to pick dates
and times for the !time syntax.
We use moment.js to try and parse the time from current token. If we
are successful, we initialize flatpickr with the parsed time, else we
default to using the current time.
In 5200598a31, we introduced a new
client capability that can be used to avoid unreasonable network
bandwidth consumed sending avatar URLs of long term idle users in
organizations with 10,000s members.
This commit enables this feature and adds support for it to the web
client.
This commit changes stream_data.create_sub_from_server_data to use
stream id, instead of stream name, for checking whether subscription
already exists or not. We are using stream ids so that we can avoid
bugs related to live update after stream rename.
This commit changes stream_data.remove_subscriber to use stream id
instead of stream name. We are using stream ids so that we can
avoid bugs related to live update after stream rename.
Thsi commit changes stream_data.add_subscriber to use stream_id
instead of stream name. We are using stream ids so that we can
avoid bugs related to live update after stream rename.
This commit removes stream_edit.rerender function. We directly
call subs.rerender_subscriptions_settings directly from
server_events_dispatch.js, which was the only caller of rerender
function, as we already have sub object.
We are using stream ids so that we can avoid bugs related to live
update after stream rename.
We can use get_sub_by_id instead of get_sub to get the stream info,
as we already have stream id from the message object. We are using
stream ids so that we can avoid bugs related to live update after
stream rename.
This commit changes receives_notifications function to use
stream_ids instead of stream names. We are using stream ids so
that we can avoid bugs related to live update after stream rename.
Prior to this commit has:link, has:attachment, has:image
filter couldn't be applied locally and deferred filtering to
web server. This commits make sure client filters all messages
it can instead of completely deferring to the server and hence
improve speed.
A tradeoff is also made to turn off local echo for has: narrows
as messages with link sent to has:link narrow were locally echoing
to another narrow and not appearing in the active has:link narrow.
Fixes: #6186.
With this implementation of the feature of the automatic theme
detection, we make the following changes in the backend, frontend and
documentation.
This replaces the previous night_mode boolean with an enum, with the
default value being to use the prefers-color-scheme feature of the
operating system to determine which theme to use.
Fixes: #14451.
Co-authored-by: @kPerikou <44238834+kPerikou@users.noreply.github.com>
Add arrow key navigation support for recent topics.
Simple jquery is used to allow navigation for filter buttons,
a grid system is used for navigation inside table.
This improves the logic and fixes the bug where the href was calculated
based on the current URL and not the filter of the current message list.
We now add the '/streams/public/' operator at the start of the operators,
similar to how it is represented in all other cases.
Fixes#15405
This reverts part of b0d632577f.
The problem was that multiple queries were combined as a single
search pill. And since we create the pills then narrow / search,
we added a comma seperator between them for the typeahead lookups
as required by the logic in `input_pill.js`.
This however introduced a new bug where the search suggestions
were incorrect as the typeahead lookup table wasn't updated, so
every time an item from the type ahead was selected it updated
the input string with an invalid operator.
Thus to resolve the first problem, we follow a simpler approach
by extracting all operators from the search string using our
`Filter.parse` logic and next add the pills, one by one.
Whenever a search pill is selected or deleted by a click the navbar
gets rendered as the searchbox loses focus. This allows the user to
be able to continue editing the search query without having to refocus
the searchbox.
A main change is that we now display the navbar if the search box
is not focused. This was already present in the search pills version
but adding it to the legacy version is an improvement.
We sufficiently increase the timeout so that the pills are actually
deleted. This was required when `filter.is_common_narrow()` is true,
as then only we render the narrow description and close the search bar.
This commit also matches another behaviour of the legacy search.
i.e. We narrow every time a search suggestion is clicked.
The now redundant "focusin" and "focusout" event handler tests are
also removed.
Two things were broken here:
* we were using name(s) instead of id(s)
* we were always sending lists that only
had one element
Now we just send "stream_id" instead of "subscriptions".
If anything, we should start sending a list of users
instead of a list of streams. For example, see
the code below:
if peer_user_ids:
for new_user_id in new_user_ids:
event = dict(type="subscription", op="peer_add",
stream_id=stream.id,
user_id=new_user_id)
send_event(realm, event, peer_user_ids)
Note that this only affects the webapp, as mobile/ZT
don't use this.
This commit adds message retention policy details in the subscription_type
text below the stream description.
We do not show any text when realm-level settings is set to forever and
stream-level is set to either forever or realm_default.
This commit adds frontend support for setting and updating message
retention days of a stream from stream settings.
Message retention days can be changed from stream privacy modal of the
stream and can be set from stream_creation_form while creating streams.
Only admins can create streams with message_retention_days value other
than realm_default.
This commit also contains relevant changes to docs.
Previously, we had implemented:
<span class="timestamp" data-timestamp="unix time">Original text</span>
The new syntax is:
<time timestamp="ISO 8601 string">Original text</time>
<span class="timestamp-error">Invalid time format: Original text</span>
Since python and JS interpretations of the ISO format are very
slightly different, we force both of them to drop milliseconds
and use 'Z' instead of '+00:00' to represent that the string is
in UTC. The resultant strings look like: 2011-04-11T10:20:30Z.
Fixes#15431.
Since we are no longer using the "pointer" value sent in
page_params.pointer for anything, there's no value in continuing to
send it from the server to the client.
The remaining code in pointer.js is logic managing state for the
currently selected message.
The stream_events tests were kinda messy, but
I mostly just consolidated a few sections of
code so that we didn't have to keep
re-stubbing the same functions.
For the actual code, I extracted add_sidebar_row
and then removed the unnecessarily complicated
jQuery trigger mechanisms.
This merges the `exports.get_search_result_legacy` and
`exports.get_search_result` function.
The key differences between the two code paths are as follows:
* We only want to generate suggestions for the queries which
the user is typing or can edit.
For the legacy version, suggestions are displayed for the
entire search string in the searchbox. (`all_operators`)
For the pills enabled version, suggestions are displayed
only for the input which hasn't been converted to pills.
(`query_operators`)
`all_operators` = `base_query_operators` + " " + `query_operators`.
trim is added at the end just to handle the legacy case
where we pass the `base_query` as ''.
* It is not possible to detect whether the user wants to
continue typing in the legacy version. However if the
the searchbox is still focused even after pill creation
we can assume the user still wants to continue typing.
To handle this we push an empty term as the `last` operator.
This is possible since the previous queries have been
completely entered as evident from it's generated pill.
* When using the legacy version, `search_operators` are
the same as `all_operators`, as mentioned in point 1.
In the pills enabled version we perform most of the
computations from the `query_operators`, but we do
require all `all_operators`, only for filtering the last
query's suggestion.
* And there is just one block unique to the legacy search
system. More details are mentioned in the comments of that
block.
We also refactor both the search suggestions node tests,
mainly to make them similar and easier to detect differences
when we switch over to the new version.
This fixes one of our oldest important user experience issues, namely
that if you never visit the home view, the Zulip webapp would often
load "deep in the past" because the pointer had not advanced.
Fixes#1529.
When fetching older/new messages, we used to resort to the pointer
to act as anchor when message list was empty.
This appears to be an impossible case, as
`fetch_status.can_load_newer_messages`
should be false in this case and user cannot be scrolling an
empty message_list in the first case.
Hence, we raise a fatal error to inform user of the same.
Now we can use common HTML image upload widget template
`image_upload_widget.hbs` for realm day/night logo and
we should access those day/night logo elements using
e.g., "#realm-day/night-logo-upload-widget .realm-logo-elements".
since we use image_upload_widget.hbs for realm day/night logo upload
widget we need to extract CSS for realm day/night logo and
place them separately under `#realm-day-logo-upload-widget`
and `#realm-day-logo-upload-widget` css id.
Now we can use common HTML image upload widget template
`image_upload_widget.hbs` for realm icon. we can access icon
element using "#realm-icon-upload-widget .realm-icon-elements".
also we need to extract CSS for realm icon and place them
separately under `#realm-icon-upload-widget` css id.
Google has removed the Google Hangouts brand, thus we are removing
them as video chat provider option.
This commit removes Google Hangouts integration and make a migration
that sets all realms that are using Hangouts as their video chat
provider to the default, jitsi.
With changes by tabbott to improve the overall video call documentation.
Fixes: #15298.
This adds support for a "spoiler" syntax in Zulip's markdown, which
can be used to hide content that one doesn't want to be immediately
visible without a click.
We use our own spoiler block syntax inspired by Zulip's existing quote
and math block markdown extensions, rather than requiring a token on
every line, as is present in some other markdown spoiler
implementations.
Fixes#5802.
Co-authored-by: Dylan Nugent <dylnuge@gmail.com>
The upload text element is wrongly named as id=user_avatar_upload_button.
now we can remove that id and access upload text element from
`#user-avatar-upload-widget .settings-page-upload-text` so that we
can have only one id at top-level and 'image_upload_widget.hbs` can
be more dynamic so we can use for other similar widgets also.
we can remove `user_avatar_delete_button` id and access delete button
from `#user-avatar-upload-widget .settings-page-delete-button` so that
we can have only one id at top level and 'image_upload_widget.hbs`
can be more dynamic so we can use for other similar widgets also.
The previous commit introduced a bug where it was not intuitive
for the user to scroll again.
For the current narrow, new messages were fetched again only when
scrolled to the bottom as usually there are many messages displayed.
However when the edge case mentioned in the previous commit
occured, it was not very obvious that a scroll should be done
or we could already be at the bottom and could not scroll again
to trigger a fetch.
`message_viewport.at_bottom` has a relevant comment explaining
this behaviour.
The previous commit handled the rare race condition. However,
there is a possibility that the rare race condition might occur
again while we are handling the previous condition.
This commit resolves these 2 problems by performing a re-fetch
while also resetting the `expected_max_message_id` and this
approach has two benefits:
1. The reset prevents an infinite loop, if somehow the expected
max message's id gets corrupted resulting in a situation
where the server can never send an id greater than that even
after fetching.
2. Even though we stop after just one re-fetch the race condition
might recursively occur while we handle the previous race
condition. And even though the reset prevents multiple re-fetches,
we don't have the missing message problem.
This is because we treat the next race condition as a new race
condition instead of it being a continuation of the previous.
The `expected_max_message_id` gets updated again, on receiving
a new message. Thus it can again enter the `fetch_status` block
as the reset value is updated again.
If a user sends a message while the latest batch of
messages are being fetched, the new message recieved
from `server_events` gets displayed temporarily out of
order (just after the the current batch of messages)
for the current narrow.
We could just discard the new message events if we havent
recieved the last message i.e. when `found_newest` = False,
since we would recieve them on furthur fetching of that
narrow.
But this would create another bug where the new messages
sent while fetching the last batch of messages would not
get rendered. Because, `found_newest` = True and we would
no longer fetch messages for that narrow, thus the new
messages would not get fetched and are also discarded from
the events codepath.
Thus to resolve both these bugs we use the following approach:
* We do not add the new batch of messages for the current narrow
while `has_found_newest` = False.
* We store the latest message id which should be displayed at the
bottom of the narrow in `fetch_status`.
* Ideally `expected_max_message_id`'s value should be equal to the
last item's id in `MessageListData`.
* So the messages received while `has_found_newest` = False,
will be fetched later and also the `expected_max_message_id`
value gets updated.
* And after fetching the last batch where `has_found_newest` = True,
we would again fetch messages if the `expected_max_message_id` is
greater than the last message's id found on fetching by refusing to
update the server provided `has_found_newest` = True in `fetch_status`.
Another benefit of not discarding the events is that the
message gets processed not rendered i.e. we still get desktop
notifications and unread count updates.
Fixes#14017
This commit removes is_old_stream property from the stream objects
returned by the API. This property was unnecessary and is essentially
equivalent to 'stream_weekly_traffic != null'.
We compute sub.is_old_stream in stream_data.update_calculated_fields
in frontend code and it is used to check whether we have a non-null
stream_weekly_traffic or not.
Fixes#15181.
We refactor these 2 notices to match with the loading indicators,
thus they have been moved to `message_scroll.js`.
After a successful message fetch, we have logic to decide whether
we want to display the notices and also whether we want to hide
the loading indicators (which are already displayed).
We also conservatively hide the notices similar to the indicators
every time we narrow.
The only exception is that we show the history limit notice on
deactivating the narrow (visiting `home_msg_list`).
This commit makes the `loading_older_messages_indicator` similar
to the `loading_newer_messages_indicator`.
Now all the decisions about whether to show a loading indicator
will be made from the `fetch_status` API. We still hide the
indicators everytime the view is changed, as explained in the
previous commit.
As explained in 67053ff479,
multiple message fetches may be taking place at the same time.
So some other narrows / the home message list's indicator might
get shown for the current narrow.
This commit moves the updation of the indicators display logic
to the `fetch_status` API.
Now the `loading_newer_messages_indicator` gets displayed along
with the `loading_newer` = true updation for that narrow's message
list, i.e. just before we send the API request. But only if the
message list we are fetching matches with our current message list.
The same indicator is hidden similarly, along with the
`loading_older` = false updation for that narrow's message list,
i.e. just after the success response is recieved. But only if
the message list whose data we recieved matches with our current
message list.
Also the indicators are hidden everytime we activate narrow
or deactivate narrow (`home_msg_list`). And on entering
`narrow.activate` we fetch for it's messages so they get
displayed again, if need be.
This is the reason `message_scroll.hide_indicators();` was
moved to a location above `fetch_messages`.
Fixes#15374.
This is the exact same bug as observed in
02ab48a61e.
The bug is in the way we invoke `Filter.parse`.
`Filter.parse` returns a list of operators which
can contain only one 'search' term at max.
All strings with the 'search' operator present
in the query are combined to form this 'search'
term.
However on concatenating two filters we may get
two terms containing the 'search' operator. This
will lead to the search suggestions getting
generated based on only the last 'search' operator
term instead of all the terms having the 'search'
operator.
This is evident from the test change as suggestions
should be based on "s stream:of" but instead they
were based on just the latest query.
In commit 35c8dcb599 we introduced the
`_stream_params` object within filter.js but we didn't correctly
handle cases where `_stream param`s is undefined within `get_title()`,
`generate_url()` and `get_icon()`, which cause the navbar to if eg a
guest user tries to access a stream they weren't subscribed to.
This commit fixes this by:
* Adding the relevant checks
* Adding node tests that include non-existent streams.
* Adds the 'question-circle-o' icon for non-existent stream narrows.
A side note here is that "non-existent streams" fall under
"common narrows" as per our current definitions, which doesn't really
make sense but shouldn't bother us.
Fixes: #15387.
We simply pass the visible message ids to remove_and_rerender
which supports bulk delete operation.
This helps us avoid deleting messages in a loop which freezes the
UI for the duration of the loop.
Fixes#15285
This event will be used more now for guest users when moving
topic between streams (See #15277). So, instead of deleting
messages in the topic as part of different events which is
very slow and a bad UX, we now handle the messages to delete in
bulk which is a much better UX.
This commit adds the option of owner role in user role dropdown
and also takes care of the restrictions while adding/removing
owner status of the user.
This commit also handles the places where we dispaly role of
the user in UI.
The get_rendered_messages now returns a Map, that is formatted as:
{
'Verona > topic 1': ['message 1', 'message 2'],
'You and Cordelia Lear': ['private message 1']
}
We also add check_messages_sent (which was expected_messages in
casper). It now takes in a object, formatted similar to
get_rendered_messages above, instead of an array with topic and
messages.
We include all method needed from casper except
get_rendered_messages, and expected_messages. We will want to tweak
their API when we migrate them.
We also rename bunch of method here while migrating them.
The changes made here are as follows:
* We rename `show_history_limit_message` and `hide_history_limit_message`
to `show_history_limit_notice` and `hide_history_limit_notice`
respectively.
* We rename `hide_or_show_history_limit_message` to
`update_top_of_narrow_notices` as now this function is responsible
for updating the history limit notice as well the end of results
notice.
* We extract 2 functions responsible for hiding and showing the end
of results notice, similar to that of the history limit notice.
All instances of `$(".all-messages-search-caution").hide();` are
replaced with the call of `hide_end_of_results_notice` function.
The streams:all advertisement notice in search should only appear
after all results have been fetched to indicate we've gotten to the
beginning of the target feed.
The notice gets hidden at the start of `narrow.activate` and is
shown just after we've fetched an older batch of messages if the
"oldest" message has been found.
Previously it would get displayed after the first fetch which
takes place from `narrow.activate`. Thus we move this logic to
`notifications.hide_or_show_history_limit_message` which gets
called after a successful message fetch.
Since the home message view contains all the messages we are not
required to display this notice. However if it is already shown
we hide it as a part of `handle_post_narrow_deactivate_processes`.
To accomplish this we need to add `has_found_oldest` key to the
`fetch_status` API.
We also removed the `pre_scroll_cont` parameter as this was it's
only use case and is now redundant.
Apparently iamcal/emoji-data has a dedicated category for flag emojis.
And get_all_emoji_categories() in emoji_picker.js doesn't return the
Flags category, because we haven't declared that category in our emoji
data logic.
Note that the category looks quite sparse because it lacks country
flags, since we don't yet support emojis combined with a Zero Width
Joiner (ZWJ) (see #992 & #11767).
Fixes#15303.
This deduplication helps with readability.
Pass get_topic_key in recent_topic_row instead of
computing it in DOM.
Fix broken test_update_unread_count
after this change. This was a regression
which went unnoticed.
We now use the real implementation of
`stream_data` in our tests (as well as `people`),
while still just checking stubs for "heavier"
functions that we dispatch to.
Also, we use our regular blueslip helpers.
This is mostly a code move. There is a bit of
boilerplate at the top, and I just use
`assert.deepEqual` instead of `assert_same`.
I also use a little wrapper to provide
output like this:
Starting node tests...
running tests for dispatch_subs
test: add
test: peer add/remove
test: remove
test: update
test: add error handling
test: peer event error handling
One little piece of code that was obsolete
simply got deleted, not moved.
One of the goals here is to un-stub the
stream_data layer.
We extract stream_edit.rerender to make
the live-update code easier to follow.
The function should eventually be inlined,
but I want to clean up some other stuff first.
These are basically shims for some deeper refactorings.
I basically just try to make the code express the
problems more clearly:
- use stream_name instead of sub
- make early-exit more explicit
- make it clear that add_subscriber needlessly
requires a name
- make it clear we have an unnecessary loop
I also fixed some phony data in the test.
We are trying to phase out the trigger-event way
of telling modules to do something.
In this case we not only remove the indirection
of the event handler, but we also get to remove
`compose_fade` from the `ui_init` startup sequence.
This also has us update `compose_fade` outside
the loop, although that's only a theoretical
improvement, since I don't think `peer_add` events
every actually include multiple streams.
To make the dispatch tests a little flatter, I
added a one-line change to zjsunit to add
`make_stub` to `global`.
To manually test:
* have Aaron reply to Denmark (keep compose box open)
* have Iago add Hamlet to Denmark
* have Hamlet unsubscribe
The discard button stub in createSaveButtons is set same
as that of save button. This isn't desired because it hides
the save button on running `change_save_button_sate` instead
of hiding discard button. It was previously working as we weren't
testing visibility of save button anywhere.
Fixes#2665.
Regenerated by tabbott with `lint --fix` after a rebase and change in
parameters.
Note from tabbott: In a few cases, this converts technical debt in the
form of unsorted imports into different technical debt in the form of
our largest files having very long, ugly import sequences at the
start. I expect this change will increase pressure for us to split
those files, which isn't a bad thing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Previously, the navbar failed at managing the searchbox text state in
cases where, eg, the user performs navigation by browser history.
This commit resolves the issue by ensuring that the searchbox text is
only (and always) set when the searchbox is made visible, and as such
there is no "state" to manage and we will always display the correct
text.
It also adds a test in `search_legacy.js` to make sure that the search
text is placed as intended.
Fixes: #14771.
This combines `upload_realm_logo` and `upload_realm_icon` into single
function called `upload_realm_logo_or_icon`. The functions wer near
duplicates.
Additional refactoring should be able to deduplicate the logic further.
Part of #14730.
We store the relevant data to hide/show a topic in the row itself,
and use jquery to hide/show it on filter change.
This also fixes search breaking the set filters.
This fixes the bug that message was undefined since we used to store
locally echoed message id and were not updating it after new message
id for the same message was received from the server.
We reuse the existing logic for displaying and updating stream color
from the stream left sidebar.
Tests fixtures were extracted and updated for this commit.
The approach that supposed to use this data was not implemented
and hence this data will no longer be used.
If this feature is implemented in future,
this data will still not be used since we would depend upon
starred_messages.js library to provide us the required information.
* Add action to mute topics.
* We don't need to store muted data per topic as previously planned.
* Moved launch topic test to the top so that they run on non-modified
data.
* Show an empty overlay of recent topics.
* Register click event to open recent topics.
* Launch recent topics on "t" keypress.
This is based on the draft overlay.
This was previously hardcoded with agreement between the Zulip backend
and frontend as 86400 seconds (1 day). Now, it's still hardcoded in
the backend, but arranged in a way where we could add a setting
without any changes to the mobile and terminal apps to update logic.
Fixes#15278.
Change user avatar spinner implementation to match
realm icon spinner implementation and have common css class
since similar implementation between similar widgets may help
in future deduplication.
In the past, the anchor message has always been the same as the
pointer, but we're about to change that as part of removing the
pointer entirely.
Using the anchor is logically what we meant, anyway, since we always
want to select a message that's actually within the range we just
fetched.
This was implemented in 2012 to avoid showing a loading indicator for
fetching messages for users with no message history. However, the
Zulip onboarding UI always creates some message history, and fetching
history is fast, so this is likely clutter more than a useful
optimization.
Generated by pyupgrade --py36-plus --keep-percent-format, but with the
NamedTuple changes reverted (see commit
ba7906a3c6, #15132).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The activity.process_loaded_messages code path was called when these
tests were originally written in f8e0137. We stopped calling that
code path in 43e5b2d (#15118). This assert test code is no longer
relevant; tested by adding console.log in the function. I came
across this when working on removing activity from the window.
Waiting till DOMContentLoaded event is triggered helps avoid flakes since
puppeteer is very fast and starts doing another task before
everything on the page is loaded. Adding this to log_in function
as almost all tests depend on this which leads to flaky tests if
the other parts of tests just start without even the page being
loaded.
One example this commit helps is for the test `02-site.js`
which is dependent on a function that runs some jquery on the site.
But because of the page not being loaded, we miss jquery and thus
the test fails. `02-site.js` and related code is added in the next
commit.
Co-authored-by: Priyank Patel <priyankp390@gmail.com>
When no credentials are sent to `log_in` function we want to
use the default generated test credentials. This saves us the
work of importing test_credentials everytime we run this function
in a different test which doesn't focus on what credentials are sent
to login.
If typeahead is used, this adds comma separated search queries
so that multiple search pills don't get combined as one and the
search behaviour remains same as search_pills_enabled = False case.
If typeahead is not used, this prevent the typing of a single comma
after the pill gets created.
Now node_tests/search.js and node_tests/search_legacy.js have
almost identical test besides the search pills related data
processing work.
This is possible since we no longer depend on the values stored
in the input pills and can narrow or search for term based on
the `#search_query` box value.
This was done in commit 02ab48a61e.
This commit removes the 'get_active_user_for_email' function
from people.js. We have removed the use of this function
in the previous commits, which changed the functions using
'get_active_user_for_email' to use user_ids instead of emails.
This commit changes the would_receive_message to use user_id
instead of emails.
This change is done because user_ids are immutable and using
user_ids is the correct way of uniquely identifying user.
The change in 'would_receive_message' also leads to change
in util.is_pm_recipient to use a string of user_ids instead
of emails.
We also know that user_ids passed to 'would_receive_message'
are active user_ids, since we get them from buddy_list.
So we don't need to check whether the user is active, which
was previously being checked by get_active_user_for_email.
This commit changes the needs_subscribe_warning function to
use user_id instead of emails.
This change is done because user_ids are immutable and using
user_ids is the correct way to uniquely identify a user.
We already know that user_ids being passed in this function are
active user_ids, since they come from typeaheads.
So, we only need to call 'people.get_by_user_id', to get the user
object from user_id and do not need to check the active status of
user, which was done previously using 'get_active_user_for_email'.
This commit changes the compose_invite_users template to use
data-user-id as property intead of data-useremail.
This is changed to maintain consistency with other parts of the
code where user_ids are used for referring to users.
This also helps in removing some of the checks for the case of
undefined emails.
We now send user_ids to the backend API for subscribing/unsubscribing
users to a stream instead of emails.
This change is done now because we have just migrated the backend API to
support sending user_ids in 2187c84, so it wasn't possible before.
This change is helpful because sending user_ids is more robust, as those
are an immutable reference to a user, rather than something that can
change with time.
The get_active_humans and get_non_active_humans functions used
to return a list of user objects. The get_active_humans is used
on settings_users.js and settings_bots.js, and in both places the
only attributes needed of the person object are the user_id and
full_name.
To make the function return smaller, instead of a list of active
humans, we are returning a list of active human ids, saving memory.
With the ids we can call the people API to get the full_name attribute.
This is done to avoid flakes where our code for focusing first input
interferes with puppeteer's typing. More details in comments.
Thanks Dinesh for testing this out earlier as part finding a solution
to this flake.
Co-authored-by: Dinesh <chdinesh1089@gmail.com>
This reimplements our Zoom video call integration to use an OAuth
application. In addition to providing a cleaner setup experience,
especially on zulipchat.com where the server administrators can have
done the app registration already, it also fixes the limitation of the
previous integration that it could only have one call active at a time
when set up with typical Zoom API keys.
Fixes#11672.
Co-authored-by: Marco Burstein <marco@marco.how>
Co-authored-by: Tim Abbott <tabbott@zulipchat.com>
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
This commit fixes the bug for subscribing the user from mention
warning which was introduced in e52b544.
This is fixed by changing email to be passed as list to
'invite_user_to_stream'.
The reason for this change is that, this is where `Filter` and
actual tracking of what messages are contiguous lives. This
will be beneficial when we will to move to a model where we
cache `MessageListData` objects for a large number of views.
This commit changes the person dict in event sent by do_change_user_role
to send role instead of is_admin or is_guest.
This makes things much more straightforward for our upcoming primary
owners feature.
Restored old behavior accidentally removed in
1ae07b93d8 (diff-e353fab8bea58b8746ec68c83aa39b36L48)
The server only remembers the most recent presence status update per
device. Meaning that, for instance, if the user only uses one client and
that client's last status update was IDLE, then the server only knows
that, doesn't know anything about the user's last ACTIVE time. Thus the
"active_timestamp" the server will serve about this user to the webapp
will be "undefined".
The old behavior was that for the sake of the "Last active: x ago"
status in buddy list popover, the latest status timestamp was used,
whether IDLE or ACTIVE.
The change linked about changed that to only pay attention to
ACTIVE. Thus, if the server doesn't remember any ACTIVE statuses, webapp
would show "Last active: More than 2 weeks ago", which was incorrect.
We restore the old behavior and further improvements can be made on top
of this.
Previously, we had to fiddle with the generated HTML to update
individual values. Now, we can simply ask the widget to rerender
the row that we updated.
This is done by passing an html_selector function that returns
a selector for the rendered item.
If:
- we do not provide html_selector function
- item is not currently rendered
- new html is not a string.
then the render_item() call is a noop.
We remove the "GROUP PMs" section that used
to be in the lower right sidebar.
Most of this is straightforward code removal.
A couple quick notes:
- The message fetching code now just
calls `huddle_data.process_loaded_messages`,
which we still need for search suggestions.
We removed `activity.process_loaded_messages`.
- The `huddle_data.process_loaded_messages`
function no longer needs to return `need_resize`.
- In `resize.js` we now just calculate
`res.buddy_list_wrapper_max_height` directly
from `usable_height`.
We had a bunch of places where we
were calling `resize.resize_bottom_whitespace`
with no arguments, which has been a no-op
since the below commit that removed support
for our `autoscroll_forever` option:
fa44d2ea69
With the `autoscroll_forever` options things
like opening/closing the compose box could
alter how much bottom whitespace you'd want,
but we stopped supporting that feature in
2017.
Since then bottom_whitespace has just always
been 40% of the viewport size. So we only need
to change it on actual resize events.
It's worth noting that we still call
`resize_bottom_whitespace` indirectly in many
places, via `resize_page_components`, and
the latter actually causes
`resize_bottom_whitespace` to do real work,
but that work is redundant for most of those
codepaths, since they're not triggered by
changes to the viewport. So there are other
opportunities for cleanup.
Trigger realm icon upload by clicking on realm icon element itself
rather than having a big upload button and to match our user avatar UI.
Added new spinner over the icon element itself to show while
uploading realm icon.
Since we are doing a assert call checking a url without no page.waitForSelector
or similar calls, we add this to avoid flakes where the assert is called
when we are in process of navigation to the page. Also, we use Promise.all
here, and call page.waitForNavigation first, to avoid race conditions where
form is submitted quickly and navigation occurs and then we are stuck waiting
for a navigation. There were no flakes in the CI related to this issue, but
I expect someone with a slow hardware would probably stumble upto this in future.
We were missing the step for clicking the checkbox to show the subdomain
input field. There was a flake because of this issue in CI where the
"testsubdomain" input was getting typed into the name field. This fixes
that flake.
There were two reason there were flakes in login tests. One problem was
that the assert call for checking that the login page url was happening
too early in rare cases. To fix this issue we wait for email input field
element in the login page. The second issue was the sometimes the url was
/login/ instead of /accounts/login/. The time between the redirect were
super close here too (around ~10ms) so I am suprised this didn't occur flake
locally more often.
Server logs that show the redirect:
2020-05-26 18:55:27.065 INFO [zr] 127.0.0.1 GET 200 36ms (db: 5ms/2q) (+start: 14ms) /accounts/login/ (unauth@zulip via ?)
2020-05-26 18:55:27.074 INFO [zr] 127.0.0.1 GET 200 28ms (db: 3ms/2q) (+start: 23ms) /login/ (unauth@zulip via ?)
To take a screenshot on failure where we have our common error
handling code in common.run_test method we need to have access to
the Page instance. Currently, we create a new Page in the test method
we pass into run_test, so we pass in a new Page instance to that method
so the test and the run_test method have access to the same Page. And,
then we take a screenshot on failure. It will be saved as `failure-${num}`
in var/puppeteer directory.
This is mostly just moving code from the `activity.js`
tests, but I also now explicitly cover the "100%"
use case (i.e. all four folks in the huddle are present).
Computed indexes into these raw objects should be guarded with
Object.prototype.hasOwnProperty; make our accessors do this
automatically and use them consistently.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This is helpful because if the user pastes multiple queries in the
searchbox and there are invalid search operators, then it is visible
through the typeahead.
The main reasoning for this change is as follows:
* When the search bar contains multiple search queries
but no search results, the last search operand does
not get displayed.
This happens due to the fact that filter object
contained 2 terms having the operator key value as
"search" instead of a single term where operator is
"search" and operand is a single string containing
the space seperated search queries. This condition
occurs for search_pills_enabled case only because
we used to Filter.parse the query twice
(once for the `base_operators` and once for the
`suggestion_operator instead of doing both at once).
Thus the `search_query` value inside the
`narrow.show_search_query` function which only
selected the operands of the first term displayed
an incomplete result.
* Another benefit of this commit is to display the narrow
operators in the URL fragment the same way as when
search_pills_enabled = False.
For example, On entering the queries in the mentioned
order -> 'is: starred', 'abc', 'def', 'is: private',
'ghi'. This is the URL:
Previously:
/#narrow/is/starred/is/private/search/abc.20def/search/ghi
Now (same as pills disabled case):
/#narrow/is/starred/is/private/search/abc.20def.20ghi
* We are also able to de-duplicate the non-typeahead search
query code path.
Commit 9b78a73e36 (#15005) made some of
our poorly written Casper tests fail. Now they’re just as poorly
written but passing again.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The people.js tests were using _add_user function to add
cross realm bots. The problem is that _add_user function
doesn't properly simulates the adding process as it doesn't
add the user in cross_realm_dict as well.
To solve this and eliminate the need of calling
people.initialize(), which means the params obj needs to be
defined, we extracted the whole logic of adding a cross realm
user into a separete function, add_cross_realm_user.
This makes it so that search_suggestion.js
does not depend on activity.js.
That dependency hasn't really been "elegant"
for quite some time, but it will become particularly
unnecessary when we go to remove the "Group PMs"
section from the right sidebar.
This commit introduces a temporary wart
where we have these two functions with the
same name in a sort of unnecessarily
complicated code stack:
activity.process_loaded_messages
huddle_data.process_loaded_messages
But we will eliminate the former function
very soon, and our message-related codepaths
will just call the `huddle_data` version
directly.
TESTING NOTES:
Now that `huddle_data` is a tiny leaf
module, it's super easy to just use the
real implementation of what was formerly
called `activity.get_huddles()` (and is
now in `huddle_data`).
When I first wrote this commit, introducing
the real implementation of `get_huddles` exposed
some bugs that I fixed in the immediately
prior commits to this.
When the tests were originally written,
I believe `activity.js` had some annoying
`jQuery` dependencies that made it hard
to unit test against. We've slimmed it over
time to be mostly just a "controller" module.
But even in its current state it would have
been a bit of a bloated dependency.
The other friction for using the actual
version of `get_huddles` was setting up
the message data, but that's pretty minor.
If you have a group PM where some users have
three-digit user_ids and some with four-digit
user_ids (or similar), a huddle could effectively
be ignored when determining the order of
search search suggestions.
Basically, we need a way to canonically sort
user_ids in "huddle" strings, and it's somewhat
arbitrary whether you sort lexically or sort
numerically, but you do need to be consistent
about it.
And JS is not exactly helpful here:
> [99, 101].sort()
[ 101, 99 ]
This is a pretty obscure bug with pretty low
user-facing consequences, and it was never
reported to us as far as I know, but the fix
here is pretty straightforward.
We have had similar bugs of slightly more consequence
in the past. The reason this bug has shown
up multiple times in our codebase is that every
component that deals with huddles has slightly
different forces that determine how it wants
to serialize the huddle. It's just one of those
annoying things. Plus, bugs with group PMs
do tend to escape detection, since most people
spend most of their time either on streams
or in 1:1 PMs.
This is a pure code extraction. The current
code is buggy with respect to user_ids with
different lengths of digits, i.e. it does
a naive lexical sort instead of a numerical
sort. We'll fix that in the next commit.
We already have a loading indicator for fetching older
messages. Thus it makes sense to implement the same
for displaying newer messages.
We set the display of `bottom-messages-logo` to none,
to prevent displaying two loading indicators during
the initial message load.
Fixes#15060.
I consolidate most of our users toward the top
of the file, so that we don't have to clutter
up individual tests. This also avoids some
confusion where charles/maria got repeated
in different tests with different ids.
I also introduce a couple four-digit ids to
try to expose more bugs related to sorting.
Note that it's still easy to keep tests
isolated here, as we have always been able
to cheaply re-initialize `people.js` and then
add individual users back.
There are still some tests where it makes
sense to just declare users locally, especially
if we are mutating their data.
There are a few minor incidental cleanups here,
mostly involving replacing hard coded ids
with things like `maria.user_id`.
This creates a little bit of noise in some
tests where we don't care about users, but
it's worth avoiding confusion about which
users exist at which time. Also the noisy
aspects here may actually catch regressions.
Finally, if the noise gets annoying, we can
do things like rename "Ted" not to collide
with the "Test" stream.
Using "bob" as the current user was a bad
choice, as our convention is to use "me" or
"myself" or "alice" for the current user.
It also particularly complicated the tests
around Group PMs.
Now we have both "bob" and "myself", which
makes the intentions of the tests a little
more clear.
This commit adds code to live update the message edit history.
Message edit history is fetched and rendered again if the edit
history modal is open.
This also adds 'data-message-id' attribute to 'message-history'
when opening history modal element which is used for checking
whether the history modal opened is of the message which is
edited.
Fixes#15051.
This code generates the timestamp string to be shown to the user
from the given timestamp in unix format using moment.js.
We also render the timestamp in a pill.
Previously, we handled this code only in message_list_view.js.
Now we support rendering stream descriptions and some dynamic
elements can be rendered in them, so we extract this new module
and use it in both the places.
This adds support for syntax like: !time(Jun 7 2017, 6:30 PM) so that
everyone sees the time in their own local timezone. This can be used
when scheduling online meetings, etc.
This adds some hardcoded values for timezones, because of there
being no sureshot way of determining the timezone easily. However,
since the main way of using the feature should be a typeahead for
entering the time, this shouldn't be cause of much concern.
Fixes#5176.
We wrap the [reset] anchor tag in a button so that we can set 'disabled'
attribute on it. We change the styles to hide the [reset] button and the
pencil icon when the widget is disabled.
We also need to call `e.preventDefault()` in the event handler since now
the anchor tag behaves as a button.
Add methods to extract recent topics from received messages.
Process new messages as they are received.
Use new messages received from the server to extract recent_topics.
Node tests added.
In common.js, we now have a single browser instance for the whole
test. When we update the test-js-with-puppetter to spawn a single
node process, like we do for node tests, we will save time on having
to open an new browser for every test + puppetter start up cost.
We will also add some more helpers here like a method for
filling out a form easily etc.
Before fixing `test-js-with-puppeteer` to to use the right webpack
setup, redirects weren't happening properly. The line this commit
removes did a redirect to the register page. This line is removed
as the redirect will happen automatically as expected with fixing
`test-js-with-puppeteer`.
Previously, we tried to read the value from page_params, which was just
a hack to make the calling code look cleaner. We now remove that hack
and thus, our dependency on page_params existing. Now, if the caller
does not specify a default value, we'll use the null-value.
This also creates a new init() function to cleanly wrap the code that
makes changes to the opts passed to the widget.
JSON.parse behaves as we want for numbers but for strings, we would
throw an error like 'unexpected token at position 0'. This meant we
couldn't read back the value set by `$input.data('val', 'text')`.
We had removed this function from the codebase when we switched to
using dropdown_list_widget. This was accidentally left as it is when
making that change.
Previously, we handled these updates in server_events_dispatch
and could accidentally call widget.render() before initializing
the widget.
Original report: https://chat.zulip.org/#narrow/near/875608.
The sync_realm_settings function ensures that if the settings are
not open, any updates are a noop.
When a user changes its avatar image, the user's avatar in popovers
wasn't being correctly updated, because of browser caching of the
avatar image. We added a version on the request to get the image in
the same format we use elsewhere, so the browser knows when to use the
cached image or to make a new request to the server.
Edited by Tim to preserve/fix sort orders in some tests, and update
zulip_feature_level.
Fixes: #14290
* Remove old topic and reprocess both old and new topic to ensure
that we are correctly storing the last_msg_id of users in the
topic. Also, Handle topic's stream (& topic) edit updates.
* Add function to get all messages in a topic in message_utils.js.
* Send topic edit event to recent_senders.
* Add func get sorted list of recent_senders to topic.
The function will be useful to handle topic edits in Recent Topic UI.
Rohitt Vashishtha
Ryan Rehman
sahil839
Anders Kaseorg
Steve Howell
Vishnu KS
Tim Abbott
Aman Agrawal
Mohit Gupta
Priyank Patel
Hashir Sarwar
Felix
MariaGkoulta
Tim Abbott
jagansivam28
Clara Dantas
Sara Gulotta
YashRE42
Dinesh
Gittenburg
Aman Agrawal
Anders Kaseorg
Mateusz Mandera
Alex Vandiver