This should help with #17425, where messages with lots of LaTeX are
lost, due to the large expansion factor.
This isn't a total fix for this - large messages with lots of LaTeX
can still end up larger than 1MB, and rendering could timeout, but
this fix should help significantly.
1MB is still small enough that I don't expect we'll run into any DOS
problems - my testing didn't show any problems rendering messages that
contain ~1MB of LaTeX.
This will offer users who are self-hosting to adjust
this value. Moreover, this will help to reduce the
overall time taken to test `test_markdown.py` (since
this can be now overridden with `override_settings`
Django decorator).
This is done as a prep commit for #18641.
?dl=1 causes Dropbox to send Content-Type: application/binary, which
can’t be interpreted by Camo. Use ?raw=1 instead.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Prior to this, we only supported direct mention to
the user groups. This commit extends that support
to silent mention for the user groups.
A related test case is also added.
Fixes: #11711.
Earlier, USER_GROUP_MENTIONS_RE was:
r"(?<![^\s\'\"\(,:<])@(\*[^\*]+\*)"
For the syntax: *foo*, this was unnecessarily capturing it as
*foo* and the extraction of `foo` was done using another helper
function: `extract_user_group`.
This is now changed as:
r"(?<![^\s\'\"\(,:<])@(\*(?P<match>[^\*]+)\*)"
and extraction of `foo` can be done just by using the named capture
group `match`.
This change also helps to simplify its related code path.
Earlier, MENTIONS_RE was:
r"(?<![^\s\'\"\(,:<])@(?P<silent>_?)(?P<match>\*\*[^\*]+\*\*)"
For the syntax: **foo**, this was unnecessarily capturing it as
**foo** and adding extra operation for the extraction of `foo`.
This is now changed as:
r"(?<![^\s\'\"\(,:<])@(?P<silent>_?)(\*\*(?P<match>[^\*]+)\*\*)"
and extraction of `foo` can be done just by using the named capture
group `match`.
This change also helps to simplify its related code path.
Following the convention, we use uppercase for
regex. Also, `user_group_mentions` is given a
conventional name ending with `*_RE`: `USER_GROUP_MENTIONS_RE`.
A message containing wildcard mention when quoted (which
is turned into a silent mention) or message with silent
wildcard mention notifies the users by sending desktop,
sound, and missed message email notifications. This
is clearly a bug which is fixed by this commit.
Fixes: #18354.
Requesting external images is a privacy risk, so route all external
images through Camo.
Tweaked by tabbott for better test coverage, more comments, and to fix
bugs.
This logic likely never ran due to a combination of bugs.
* Running `maybe_update_markdown_engines` unconditionally meant that
`if md_engine_key in md_engines` was likely always true.
* Introduced in 65838bb: DEFAULT_MARKDOWN_KEY could never be in
md_engines, so should we have ever reached that code path, we'd have
tried to rebuild all markdown engines every time.
And it also wasn't clearly helpful -- because we fetch all linkifiers
for a realm on every request anyway, we don't really save database
queries by doing a bulk fetch on startup, and doing so would likely
result in a material regression to Zulip's overall startup time that
we were creating markdown engines for large numbers of realms in bulk
during process startup.
This reverts commit 9c6d8d9d81 (#16916).
This feature has known bugs, and also wants some design changes to
make it customizable like linkifiers, so we’re retargeting this to
post-4.x.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Backend logic for handling user mention was cluttered
because it was handled at two stages first in
get_possible_mentions_info while fetching mention data
based on the messsage and then later in UserMentionPattern
which handles processing of text for mention.
Ideally UserMentionPattern should depend on
get_possible_mentions_info only for data but there was a
shared logic between these two that made it hard to debug
any possible bugs.
Updates in this commit make both of these functions
coherent in terms of logic and also add appropiate
comments to improve readability of these functions.
There was also a hidden bug that if a user A is
mentioned in with @**name|id** then @**invalid|id**
again mentioned A because of the way we handled mentions
earlier. It is solved as a result of this refactor and
appropiate test has been added for this.
This has been tested manually as well as by adding new
test to address missing case.
Extend our markdown system to support mentioning of users
by id also. Following these changes, it would be possible
to mention users with @**|user_id** and silently mention
using @_**|user_id**.
Main intention for extending the mention syntax is to make
it convenient for bots to mention a users using their ids. It
is to be noted that previous syntax are also supported.
Documentation tweaked by tabbott for better readability.
The changes were tested manually in development server, and also
by adding some new backend and frontend tests.
Fixes: #17487.
We add support to shorten links and test their shortening in
well-organized, clean manner that makes it trivial to extend the
GitHub approach for GitLab and perhaps other services.
We only shorten basic types of GitHub links (issue, PR, commit) that
fit a set of simple common patterns; the default behaviour of Autolink
is kept for everything else.
Logic added in frontend and backend Markdown Processor is identical.
This makes easy to extend the logic for other services like GitLab.
Fixes#11895.
Modifies `StreamPattern` and `StreamTopicPattern` to inherit
from InlineProcessor instead of Pattern. This change is done
because Pattern stopped checking for matching patterns as soon
as it found a match which was not a valid stream. Due to this
all the subsequent mention failed, even if they were valid.
This bug was only present in backend renderring due to
markdown.inlinepatterns.Pattern.
Due to above changes verbose_compile is no longer used for
precompiling STREAM_LINK_REGEX, STREAM_TOPIC_LINK_REGEX as
adds ^(.*?) and (.*?)$ which cause extra overhead of matching
pattern which is not required. With new InlineProcessor these
extra patterns at beggining and end are not required.
So, StreamPattern and StreamTopicPattern now define their own
__init__ method for precompiling the regex.
Fixes#17535.
These changes were tested locally in dev server and by adding
some new markdown tests to test these.
Modifies `UserGroupMentionPattern` to inherit from InlineProcessor
instead of Pattern. This change is done because Pattern
stopped checking for matching patterns as soon as it found
a match which was not a valid user group. Due to this all
the subsequent user group mention failed, even if they were
valid. This bug was only present in backend renderring due to
markdown.inlinepatterns.Pattern.
This was reported as issue #17535.
These changes were tested locally in dev server and by adding
some new markdown tests to test these.
Modifies `UserMentionPattern` to inherit from InlineProcessor
instead of Pattern. This change is done because Pattern
stopped checking for matching patterns as soon as it found
a match which was not a valid user. Due to this all the
subsequent user mention failed. This bug was only present in
backend renderring due to markdown.inlinepatterns.Pattern.
This was reported as issue #17535.
These changes were tested locally in dev server and by adding
some new markdown tests to test these.
Commit 434094e599 (#11321) changed this
from an Extension to a subclass of Markdown, so it no longer has any
reason to use a config dict structured like that of an Extension.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The changes are as follows:
• Fix one day offset in all western zones.
• Correct CST from -64800 to -21600 and CDT from -68400 to -18000.
• Disambiguate PST in favor of -28000 over +28000.
• Add GMT, UTC, WET, previously excluded for being at offset 0.
• Add ACDT, AEDT, AKST, MET, MSK, NST, NZDT, PKT, which the previous
code did not find.
• Remove numbered abbreviations -12, …, +14, which are unnecessary.
• Remove MSD and PKST, which are no longer used.
Hardcode the dict and verify it with a test, so that future
discrepancies won’t go silently unnoticed.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Initally, when writing two or more quotes, having
a blank line in between them, merges those quotes.
This created confusion especially in "quote and reply".
This commit fixes such issues. Now two or more quotes
having a blank line in between them, will not get merged.
This change is correct both for usability and for improving our
compatibility with CommonMark.
Fixes#14379.
See commit 8b002040e0 and #86. The
development environment bug that necessitated this handler has long
been irrelevant.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Initially markdown titles were overridden by Youtube and Vimeo preview titles.
But now it will check if any markdown title is present to replace Youtube or
Vimeo preview titles, if preview of linked websites is enabled.
Fixes#16100
If multiple filters match the same string, we run into an infinite
loop of converting string into urls. To fix it, we mark the matched
string as atomic after first conversion.
The previous code only worked by accident and hyperlink 20.0.0 breaks
it.
>>> hyperlink.parse("example.com").replace(scheme="https")
DecodedURL(url=URL.from_text('https:example.com'))
Signed-off-by: Anders Kaseorg <anders@zulip.com>
03ca3afbc2 added more codes that are equivalent to 404's; this adds to
the list of cache-as-None codes a couple which are equivalent to
403's. It does not comprise _all_ possible 403-like codes -- many of
them are "the client is not OK," which is relevant to log as an error
still.
The exception trace only goes from where the exception was thrown up
to where the `logging.exception` call is; any context as to where
_that_ was called from is lost, unless `stack_info` is passed as well.
Having the stack is particularly useful for Sentry exceptions, which
gain the full stack trace.
Add `stack_info=True` on all `logging.exception` calls with a
non-trivial stack; we omit `wsgi.py`. Adjusts tests to match.
Per the API documentation[1], the following codes all correspond to
HTTP 404:
- `34`: **Sorry, that page does not exist.** The specified resource
was not found.
- `144`: **No status found with that ID.** The requested Tweet ID is
not found (if it existed, it was probably deleted)
- `421`: **This Tweet is no longer available.** The Tweet cannot be
retrieved. This may be for a number of reasons.
- `422`: **This Tweet is no longer available because it violated the
Twitter Rules.** The Tweet is not available in the API.
Treat all of these identically.
[1] https://developer.twitter.com/en/docs/basics/response-codes
This change makes our handling of youtube-url previews consistent
with how we handle our inline images. This allows the previews to
render next to the paragraph that links to the youtube video.
Follow-up to PR #15773.
This is similar to our behavior with image previews, and helps
reduce clutter in the final rendered html.
We add the string 'Tweet: ' to our existing tests so those tests
remain the same.
This commit makes our handling of twitter previews consistent with
how we handle our inline images so that tweets render next to the
paragraph that links to the tweet.
We decouple the logic of insertion rules for inline links from
image preview logic. Now, we can use this same logic for other
kinds of link previews as well.
This particular commit has been a long time coming. For reference,
!avatar(email) was an undocumented syntax that simply rendered an
inline 50px avatar for a user in a message, essentially allowing
you to create a user pill like:
`!avatar(alice@example.com) Alice: hey!`
---
Reimplementation
If we decide to reimplement this or a similar feature in the future,
we could use something like `<avatar:userid>` syntax which is more
in line with creating links in markdown. Even then, it would not be
a good idea to add this instead of supporting inline images directly.
Since any usecases of such a syntax are in automation, we do not need
to make it userfriendly and something like the following is a better
implementation that doesn't need a custom syntax:
` Alice: hey!`
---
History
We initially added this syntax back in 2012 and it was 'deprecated'
from the get go. Here's what the original commit had to say about
the new syntax:
> We'll use this internally for the commit bot. We might eventually
> disable it for external users.
We eventually did start using this for our github integrations in 2013
but since then, those integrations have been neglected in favor of
our GitHub webhooks which do not use this syntax.
When we copied `!gravatar` to add the `!avatar` syntax, we also noted
that we want to deprecate the `!gravatar` syntax entirely - in 2013!
Since then, we haven't advertised either of these syntaxes anywhere
in our docs, and the only two places where this syntax remains is
our game bots that could easily do without these, and the git commit
integration that we have deprecated anyway.
We do not have any evidence of someone asking about this syntax on
chat.zulip.org when developing an integration and rightfully so- only
the people who work on Zulip (and specifically, markdown) are likely
to stumble upon it and try it out.
This is also the only peice of code due to which we had to look up
emails -> userid mapping in our backend markdown. By removing this,
we entirely remove the backend markdown's dependency on user emails
to render messages.
---
Relevant commits:
- Oct 2012, Initial commit c31462c278
- Nov 2013, Update commit bot 968c393826
- Nov 2013, Add avatar syntax 761c0a0266
- Sep 2017, Avoid email use c3032a7fe8
- Apr 2019, Remove from webhook 674fcfcce1
We had been using !time() syntax for timestamps so far. Since its
an unreleased feature, we can make changes without affecting many
people.
Fixes#15442.
Prior to this commit whenever convert was imported from zerver.lib.markdown
it was aliased as markdown_convert for readability.
This commit rename convert function to markdown_convert so that it can be
directly import it without aliasing and without compromising readability.
rename ZEPHYR_MIRROR_BUGDOWN_KEY to ZEPHYR_MIRROR_MARKDOWN_KEY and
DEFAULT_BUGDOWN_KEY tp DEFAULT_MARKDOWN_KEY.
This commit is part of series of commits aimed at renaming bugdown to
markdown.
This commits changes class name of MarkdownListPreprocessor to
MarkdownListPreprocessor. It also changes corresponding references
in tests.
This is part of series of commits which aims for renaming bugdown to
markdown.
This commit is first of few commita which aim to change all the
bugdown references to markdown. This commits rename the files,
file path mentions and change the imports.
Variables and other references to bugdown will be renamed in susequent
commits.
Wesley Aptekar-Cassels
akshatdalton
Anders Kaseorg
Ganesh Pawar
Tim Abbott
Abhijeet Prasad Bodas
Sumanth V Rao
m-e-l-u-h-a-n
Aman Agrawal
Alex Vandiver
Vinit Singh
Rohitt Vashishtha
Mohit Gupta