This commit makes it possible for users to control the wildcard
mention notifications for messages sent to followed topics
via a global notification setting.
There is no support for configuring this setting
through the UI yet.
This commit makes it possible for users to control
the email notifications for messages sent to followed topics
via a global notification setting.
Although there is no support for configuring this setting
through the UI yet.
Add five new fields to the UserBaseSettings class for
the "followed topic notifications" feature, similar to
stream notifications. But this commit consists only of
the implementation of email notifications.
Note that we use the DjangoJSONEncoder so that we have builtin support
for parsing Decimal and datetime.
During this intermediate state, the migration that creates
extra_data_json field has been run. We prepare for running the backfilling
migration that populates extra_data_json from extra_data.
This change implements double-write, which is important to keep the
state of extra data consistent. For most extra_data usage, this is
handled by the overriden `save` method on `AbstractRealmAuditLog`, where
we either generates extra_data_json using orjson.loads or
ast.literal_eval.
While backfilling ensures that old realm audit log entries have
extra_data_json populated, double-write ensures that any new entries
generated will also have extra_data_json set. So that we can then safely
rename extra_data_json to extra_data while ensuring the non-nullable
invariant.
For completeness, we additionally set RealmAuditLog.NEW_VALUE for
the USER_FULL_NAME_CHANGED event. This cannot be handled with the
overridden `save`.
This addresses: https://github.com/zulip/zulip/pull/23116#discussion_r1040277795
Note that extra_data_json at this point is not used yet. So the test
cases do not need to switch to testing extra_data_json. This is later
done after we rename extra_data_json to extra_data.
Double-write for the remote server audit logs is special, because we only
get the dumped bytes from an external source. Luckily, none of the
payload carries extra_data that is not generated using orjson.dumps for
audit logs of event types in SYNC_BILLING_EVENTS. This can be verified
by looking at:
`git grep -A 6 -E "event_type=.*(USER_CREATED|USER_ACTIVATED|USER_DEACTIVATED|USER_REACTIVATED|USER_ROLE_CHANGED|REALM_DEACTIVATED|REALM_REACTIVATED)"`
Therefore, we just need to populate extra_data_json doing an
orjson.loads call after a None-check.
Co-authored-by: Zixuan James Li <p359101898@gmail.com>
It turns out that for some some deployments, there exists a second,
duplicate, foreign key constraint for user_profile_id. The logic below
would try to rename both to the same name, which would fail on the
second:
```
psycopg2.errors.DuplicateObject: constraint "zerver_userpresenceo_user_profile_id_d75366d6_fk_zerver_us" for relation "zerver_userpresence" already exists
```
Eliminate the duplicate constraint, rather than attempting to rename
it. Also add a block, in case of future reuse of this pattern, which
caveats that this approach will not work in the presence of
explicitly-named indexes. UserPresence happens to not have any, so
this technique is safe in this instance.
Co-authored-by: Alex Vandiver <alexmv@zulip.com>
This code clearly meant to return host and returning realm.host is a
mistake. realm.host is not accessible in a migration due to being a
@property-decorated method. The code constructs the host var value just
above this line.
This prevents `get_user_profile_by_api_key` from doing a sequential
scan.
Doing this requires moving the generation of initial api_key values
into the column definition, so that even bare calls to
`UserProfile.objects.create` (e.g. from tests) call appropriately
generate a random initial value.
Backfill subscription realm audit log SUBSCRIPTION_CREATED events for
users which are currently subscribed but don't have any subscription
events, presumably due to some historical bug. This is important
because those rows are necessary when reactivating a user who is
currently soft-deactivated.
For each stream, we find the subscribed users who have no
subscription-related realm audit log entries, and create a
`backfill=True` subscription audit log entry which is the latest it
could have been, based on UserMessage rows. We then optionally insert
a `DEACTIVATION` if the current subscription is not active.
Previously, it seemed possible for the scheduled messages API to try
to send infinite copies of a message if we had the very poor luck of a
persistent failure happening after a message was sent.
The failure_message field supports being able to display what happened
in the scheduled messages modal, though that's not exposed to the API
yet.
Fixes#25414.
We add Attachment.scheduled_messages relation to track ScheduledMessages
which reference the attachment.
The import bits can be done after merging this, by updating #25345.
This was doing bulk_create in a loop for each realm, which is too slow
on very large servers. Just do a single bulk_create with a reasonable
batch_size at the end.
This implements the core of the rewrite described in:
For the backend data model for UserPresence to one that supports much
more efficient queries and is more correct around handling of multiple
clients. The main loss of functionality is that we no longer track
which Client sent presence data (so we will no longer be able to say
using UserPresence "the user was last online on their desktop 15
minutes ago, but was online with their phone 3 minutes ago"). If we
consider that information important for the occasional investigation
query, we have can construct that answer data via UserActivity
already. It's not worth making Presence much more expensive/complex
to support it.
For slim_presence clients, this sends the same data format we sent
before, albeit with less complexity involved in constructing it. Note
that we at present will always send both last_active_time and
last_connected_time; we may revisit that in the future.
This commit doesn't include the finalizing migration, which drops the
UserPresenceOld table.
The way to deploy is to start the backfill migration with the server
down and then start the server *without* the user_presence queue worker,
to let the migration finish without having new data interfering with it.
Once the migration is done, the queue worker can be started, leading to
the presence data catching up to the current state as the queue worker
goes over the queued up events and updating the UserPresence table.
Co-authored-by: Mateusz Mandera <mateusz.mandera@zulip.com>
This removes the validator argument for 0423_realmfilter_url_template,
which do not really alter the database schema. It otherwise fails
the migration because the filter_format_validator function is removed.
Migration 0094_realm_filter_url_validator is modified because we can no
longer refer to filter_format_validator.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This swaps out url_format_string from all of our APIs and replaces it
with url_template. Note that the documentation changes in the following
commits will be squashed with this commit.
We change the "url_format" key to "url_template" for the
realm_linkifiers events in event_schema, along with updating
LinkifierDict. "url_template" is the name chosen to normalize
mixed usages of "url_format_string" and "url_format" throughout
the backend.
The markdown processor is updated to stop handling the format string
interpolation and delegate the task template expansion to the uri_template
library instead.
This change affects many test cases. We mostly just replace "%(name)s"
with "{name}", "url_format_string" with "url_template" to make sure that
they still pass. There are some test cases dedicated for testing "%"
escaping, which aren't relevant anymore and are subject to removal.
But for now we keep most of them as-is, and make sure that "%" is always
escaped since we do not use it for variable substitution any more.
Since url_format_string is not populated anymore, a migration is created
to remove this field entirely, and make url_template non-nullable since
we will always populate it. Note that it is possible to have
url_template being null after migration 0422 and before 0424, but
in practice, url_template will not be None after backfilling and the
backend now is always setting url_template.
With the removal of url_format_string, RealmFilter model will now be cleaned
with URL template checks, and the old checks for escapes are removed.
We also modified RealmFilter.clean to skip the validation when the
url_template is invalid. This avoids raising mulitple ValidationError's
when calling full_clean on a linkifier. But we might eventually want to
have a more centric approach to data validation instead of having
the same validation in both the clean method and the validator.
Fixes#23124.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This is implemented by replacing all matches of "%(var_name)s" in a URL
format string with "{var_name}". Since we do want to ensure that the
templates aren't broken after this migration, a RuntimeError is raised
to let the maintainer know that certain linkifier cannot be converted
automatically if it does not pass the uri_template.validate check.
Also, we need to escape "%%", which is used to represent "%" in the old
format string syntax, as well as "{" and "}", which is a part of the
URL template syntax.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This will later be used to expand matching linkifier patterns.
Making it nullable for now, but we will make it required in
the APIs.
As a part of this transition, we temporarily make url_format_string
nullable as well, which will be later removed. This allows us to
switch to populating url_template without caring about passing
url_format_string.
Note that the validators are imported in the migration because Django
otherwise diffs it and considers the schema to be different, generating
a migration, failing the "tools/test-migrations" test.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
208c0c3034 fixed this for new deleted users, but left existing users
with potentially invalid email addresses. This is problematic if the
realm is ever exported and re-imported, as the addresses will not
validate.
Add a migration which attempts to fix these invalid email addresses.
So far, we've used the BitField .authentication_methods on Realm
for tracking which backends are enabled for an organization. This
however made it a pain to add new backends (requiring altering the
column and a migration - particularly troublesome if someone wanted to
create their own custom auth backend for their server).
Instead this will be tracked through the existence of the appropriate
rows in the RealmAuthenticationMethods table.
This commit adds code to create a "Nobody" system user group
to realms which will be used in settings to represent "Nobody"
option.
We also add a migration to add this group to existing realms.
This commit adds PreregistrationRealm class which will be
similar to PreregistrationUser and will store initial
information of the realm before its creation as we are
changing the organization creation flow as per #24307.
Fixes part of #24307.
Currently, there is a checkbox setting for whether to
"Include realm name in subject of message notification emails".
This commit replaces the checkbox setting with a dropdown
having values: Automatic [default], Always, Never.
The Automatic option includes the realm name if, and only if,
there are multiple Zulip realms associated with the user's email.
Tests are added and(or) modified.
Fixes: #19905.
c7d0192755 added the unique constraint on
`user_profile_id,message_id,reaction_type,emoji_code`, but left the
existing constraint on `user_profile_id,message_id,emoji_name`. As
explained in the comment added in 3cd543ee98, `emoji_name` cannot be
trusted to be unique, as it is possible to have an Unicode emoji
reaction and a custom emoji with the same name on a message.
Remove the overly-constraining unique index, now that c7d0192755 has
provided the correct one.
This commit adds migration to fix extra_data field
of RealmAuditLog objects created on changing
can_remove_subscribers_group setting to add "property"
field since the same event type will now be used for
other group based stream settings that will be added
in future.
This will allow us to rely on the database to detect duplicate
`UserTopic`s (with the same `topic_name` with different cases)
and thus correctly throw IntegrityErrors when expected.
This is also important from a correctness point of view, since as
of now, when checking if topic is muted or requesting the backend for
muting a topic, the frontend does not check for case insensitivity.
There might exist duplicate UserTopics (in a case insensitive sense)
which need are removed before creating the new index.
The migration was tested manually using `./manage.py shell`.
Black 23 enforces some slightly more specific rules about empty line
counts and redundant parenthesis removal, but the result is still
compatible with Black 22.
(This does not actually upgrade our Python environment to Black 23
yet.)
Signed-off-by: Anders Kaseorg <anders@zulip.com>
608c787c52 fixed a bug where messages sent by the email gateway "as"
a user failed to properly attribute ownership of their attachments,
leaving the attachments orphaned and thus with nobody with permissions
to view them.
These orphaned attachments only remain longer than a few weeks if the
`delete_unclaimed_attachments` script has not been run reliably.
Since there is currently no shipped cron job for this, that is most
likely all deployments.
Add a migration to find such orphaned attachments, and re-attach them
to their original message. While theoretically the attachments
could have been later referenced in other messages -- which would be
very difficult to find and determine if they had access to the
attachment -- we only fix the original message.
In order to make this somewhat performant, we assume that the Message
rows associated with an Attachment made by the email gateway happened
within 5 minutes, since they must have been made during one HTTP
request.
This is complicated by the message potentially having been deleted; in
this case, the Attachment is moved into ArchivedAttachment, so it can
relate to the ArchivedMessage. The many-to-many
`zerver_archivedattachment_messages` relationship table cannot use its
own `id` sequence for the value, since the `id` is re-used when the
row is inserted into the `zerver_attachment_messages` table -- we
instead consume a value from the `id` sequence of the
`zerver_attachment_messages` table.
The intention was to continue the outer ‘for’ loop, not the inner one
(but Python doesn’t have labelled ‘continue’).
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This allows us to revoke MultiUseInvites by changing their .status
instead of deleting them (which has been deleting the helpful tracking
information on PreregistrationUsers about which MultiUseInvite they came
from).
This guarantees that the Realm is always non-None when we hit the
codepath is_static_or_current_realm_url via
do_change_stream_description, so that we can properly skip rewritting
some images.
Fixes#19405
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
We followed a same approach as in #22611 to mark migrations as noops. We
might eventually squash them.
Migration operations that only change the validators should be removed
as they are essentially noops that do not affect the database schema.
However, ./manage.py makemigration still generates a new migration for
validators change regardless. So we still have to keep one migration
that updates the validators to the latest state. We prefer to keep the
earliest one for this purpose.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This commit adds the OPTIONAL .realm attribute to Message
(and ArchivedMessage), with the server changes for making new Messages
have this set. Old Messages still have to be migrated to backfill this,
before it can be non-nullable.
Appropriate test changes to correctly set .realm for Messages the tests
manually create are included here as well.
zerver/migrations/0240_usermessage_migrate_bigint_id_into_id.py needs
to be updated to account for Django 4.1 creating AutoField as an
identity column rather than a serial column.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The sequence value should reflect the last id, not the next id, to
avoid leaving a gap of 1. Also, it should take ArchivedUserMessage.id
into account to avoid collisions during future archiving.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
SCIMClient is a type-unsafe workaround for django-scim2’s conflation
of SCIM users with Django users. Given that a SCIMClient is not a
UserProfile, it might as well not be a model at all, since it’s only
used to satisfy django-scim2’s request.user.is_authenticated queries.
This doesn’t solve the type safety issue with assigning a SCIMClient
to request.user, nor the performance issue with running the SCIM
middleware on non-SCIM requests. But it reduces the risk of potential
consequences worse than crashing, since there’s no longer a
request.user.id for Django to confuse with the ID of an actual
UserProfile.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
We are no longer writing to or reading the UserStatus.status field,
so we delete that from the model.
Fifth step in making user status `away` a deprecated way to access
`presence_enabled` for clients supporting older servers.
Part of transitioning from 'unavailable' user status feature to
'invisible mode' user presence feature.
Now that user status updates with `away=True|False` also update the
user's presence_enabled setting, we do a migration so that users with
`UserStatus.status=AWAY` also have the presence_enabled setting as
False (`away=!presence_enabled`).
Second step in making user status away a deprecated way to access
presence_enabled for clients supporting older servers.
Part of transitioning from 'unavailable' user status feature to
'invisible mode' user presence feature.
To allow `custom_profile_field` to display in user profile popover,
added new boolean field "display_in_profile_summary" in its model class.
In `custom_profile_fields.py`, functions are edited as per conditions,
like currently we can display max 2 `custom_profile_fields` except
`LONG_TEXT` and `USER` type fields.
Default external account custom profile fields made updatable for only
this new field, as previous they were not updatable.
Fixes part of: #21215
Updates the two UserProfile foreign key fields to have a backward
relation in the MutedUser model by changing the `related_name`
property.
This is a prep commit for removing users with a muted relationship
to the current user from read receipts.
This commit udpates can_remove_subscribers_group to be not null.
We already added a migration to set the value of this field for
existing streams and also added a commit to set this field to
admins system group for now while creating streams.
This migration sets can_remove_subscribers_group value to admins system
group for all the existing streams. In further commit we would change
can_remove_subscribers_group to be not null and thus we add this migration
to ensure all existing streams have this setting value set.
Added a user_list_style personal user setting to the bottom of
Settings > Display settings > Theme section which controls the look
of the right sidebar user list.
The radio button UI includes a preview of what the styles look like.
The setting is intended to eventually have 3 possible values: COMPACT,
WITH_STATUS and WITH_AVATAR; the final value is not yet implemented.
Co-authored-by: Tim Abbott <tabbott@zulip.com>
This also allows us to remove some assertions as we now know that
AVATAR_SALT will never be None.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
This commit changes the code to consider zero as an invalid value for
message_content_edit_time_limit_seconds. Now to represent the setting that
user can edit the message anytime, the setting value will be "None" in
database and "unlimited" will be passed to API from clients.
Since validators do not affect the database, this migration is a noop.
Removing the migration fails check-database-compatibility. We might
eventually delete it when Django supports a cleaner method for deletion.
TODO:
Remove the type annotation when django-stubs is integrated.
Signed-off-by: Zixuan James Li <p359101898@gmail.com>
There may be some internal realms which were created after applying
"0382_create_role_based_system_groups.py" migration and this migration
is used to create system groups for those realms.
Because Django's ContentType objects are, by default, created lazily
when an actual object is created that will use them, this migration
would fail on any server that actually had RealmReactivationStatus
objects already, and had not yet created the ContentType for them.
ContentType objects are very simple:
zulip=> select * from django_content_type where model = 'realmreactivationstatus';
id | app_label | model
----+-----------+-------------------------
85 | zerver | realmreactivationstatus
So we can simply patch this by using get_or_create.
We now send a new user_topic event while muting and unmuting topics.
fetch_initial_state_data now returns an additional user_topics array to
the client that will maintain the user-topic relationship data.
This will support any future addition of new features to modify the
relationship between a user-topic pair.
This commit adds the relevent backend code and schema for the new
event.
Now that we can assume Python 3.6+, we can use the
email.headerregistry module to replace hacky manual email address
parsing.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
A user ran into an issue while upgrading where
ContentType.objects.get(model="realmreactivationstatus",
app_label="zerver") fails due to the object being missing. The reason
for that is to be yet figured out, but the immediate solution is clear
in the sense that the migration can just quit early
if not Confirmation.objects.filter(type=REALM_REACTIVATION).exists() and
that'll effectively skip it for almost all servers (because realm
reactivations links are something that's really only useful on Zulip
Cloud).
Fixes#21266.
We want to tie the prereg_user to the MultiUseInvite directly rather
than to the MultiUserInvite's confirmation object, because the latter is
not possible. This is because the flow is that after going through the
multiuse invite link, the PreregistrationUser is created together with a
Confirmation object, creating a confirmation link (via
create_confirmation_link) to which then the user is redirected to finish
account creation. This means that the PreregistrationUser is already
tied to a Confirmation, so that attribute is occupied.
PostgreSQL's `default_statistics_target` is used to track how many
"most common values" ("MCVs") for a column when performing an
`ANALYZE`. For `tsvector` columns, the number of values is actually
10x this number, because each row contains multiple values for the
column[1]. The `default_statistics_target` defaults to 100[2], and
Zulip does not adjust this at the server level.
This translates to 1000 entries in the MCV for tsvectors. For
large tables like `zerver_messages`, a too-small value can cause
mis-planned query plans. The query planner assumes that any
entry *not* found in the MCV list is *half* as likely as the
least-likely value in it. If the table is large, and the MCV list is
too short (as 1000 values is for large deployments), arbitrary
no-in-the-MCV words will often be estimated by the query planner to
occur comparatively quite frequently in the index. Based on this, the
planner will instead choose to scan all messages accessible by the
user, filtering by word in tsvector, instead of using the tsvector
index and filtering by being accessible to the user. This results in
degraded performance for word searching.
However, PostgreSQL allows adjustment of this value on a per-column
basis. Add a migration to adjust the value up to 10k for
`search_tsvector` on `zerver_message`, which results in 100k entries
in that MCV list.
PostgreSQL's documentation says[3]:
> Raising the limit might allow more accurate planner estimates to be
> made, particularly for columns with irregular data distributions, at
> the price of consuming more space in `pg_statistic` and slightly
> more time to compute the estimates.
These costs seem adequate for the utility of having better search.
In the event that the pgroonga backend is in use, these larger index
statistics are simply wasted space and `VACUUM` computational time,
but the costs are likely still reasonable -- even 100k values are
dwarfed by the size of the database needed to generate 100k unique
entries in tsvectors.
[1]: https://github.com/postgres/postgres/blob/REL_14_4/src/backend/utils/adt/array_typanalyze.c#L261-L267
[2]: https://www.postgresql.org/docs/14/runtime-config-query.html#GUC-DEFAULT-STATISTICS-TARGET
[3]: https://www.postgresql.org/docs/14/planner-stats.html#id-1.5.13.5.3
This commit removes "role" field from subscription
objects since we are not moving forward with stream
administrator concept and instead working on new
permssions model as per #19525.
This commit removes WILDCARD_MENTION_POLICY_STREAM_ADMINS
option of wildcard_mention_policy since we are not moving
forward with stream administrator concept and instead working
on new permssions model as per #19525.
We also add a migration to change wildcard_mention_policy of
existing realms to WILDCARD_MENTION_POLICY_ADMINS. This change
is fine since we were already treating both the setting values
as same as stream admin concept was not implemented completely.
This was removed in Django 4.0 except in historical migrations. We
might as well replace it everywhere.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
Adds `want_advertise_in_communities_directory` to the realm model
to track organizations that give permission to be listed on such
a site / directory on zulip.com.
Adds a checkbox to the organization profile admin for
organizations to give permission to be advertised in the
Zulip communities directory.
Adds a help center article about the Zulip communities directory
and uses a shared intro documentation file to create sections in
the articles on creating an organization profile and moderating
open organizations.
Co-authored-by: Alya Abbott <alya@zulip.com>
The default of a Stream is to be public - having
history_public_to_subscribers default to False is inconsistent with
that. The defaults on the model should generally be consistent.
history_public_to_subscribers wasn't explicitly set when creating
streams via build_stream, thus relying on the model's default of False.
This lead to public streams being created with that value set to False,
which doesn't make sense.
We can solve this by inferring the correct value based on invite_only in
the build_stream funtion itself - rather than needing to add a flag
argument to it.
This commit also includes a migration to fix public stream with the
wrong history_public_to_subscribers value.
Fixes#21784.
Added a setting to the bottom of Settings > Display settings > Theme section
to display the reacting users on a message when numnber of reactions are
small.
This is a preparatory commit for #20980.
This is necessary for the migration 0386_fix_attachment_caches to run,
and likely makes more convenient any future parallel code interacting
with both Attachment and ArchivedAttachment.
This migration needs to be run after the previous commit is deployed
to a given Zulip installation, to fix any stale values of
is_realm_public and is_web_public.
Previously, Attachment.is_realm_public and its cousin,
Attachment.is_web_public, were properties that began as False and
transitioned to True only when a message containing a link to the
attachment was sent to the appropriate class of stream, or such a link
was added as part of editing a message.
This pattern meant that neither field was updated in situations where
the access permissions for a message changed:
* Moving the message to a different stream.
* Changing the permissions for a stream containing links to the message.
This correctness issue has limited security impact, because uploaded
files are secured both by a random URL and by these access checks.
To fix this, we reformulate these fields as a cache, with code paths
that change the permissions affecting an attachment responsible for
setting these values to the `None` (uncached) state. We prefer setting
this `None` state over computing the correct permissions, because the
correct post-edit permissions are a function of all messages
containing the attachment, and we don't want to be responsible for
fetching all of those messages in the edit code paths.
* Don't print the empty list for the vast majority of realms where
this is a noop.
* Make output a little more clear that this isn't revoking all
Confirmations, just those associated with deactivated users.
he possibility for it being null was likely an oversight -- it should
have been removed after the early migrations to backfill the field
when it was added.
We've confirmed there are no existing violations of this invariant in
Zulip Cloud.
This is a natural follow-up to
93e8740218 - invitations sent by users
deactivated before the commit still need to be revoked, via a
migration.
The logic for finding the Confirmations to deactivated is based on
get_valid_invite_confirmations_generated_by_user in actions.py.
This commit adds users to the appropriate system user group
based on their role. We also change the user groups when
changing role of the user.
We also add migration to add existing users to the appropriate
user groups.
This commit adds update_users_in_full_members_system_group which
is currently used to update the full members group on changing
role of a user. This function will be modified in next commit such
that it can be used to update full members group on changing
waiting_period_threshold setting of realm.
This is in a separate commit to make deployment easier. It ensures that
this is only marked non-null after the backfill migration (backfilling
.uuid for all old UserProfiles) runs - which was added in the previous
commit.
This model is by designed intended to exist on a 1:1 relationship with
Realms, and we attempt to ensure that with application code, but we
should have a unique constraint too, since a database with duplicate
such entries would be corrupted.
We do this via the standard Django OneToOneField.
A migration should not import zerver.lib.streams at all, but this
solves the immediate problem with check-database-compatibility.py.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
This was only used for upgrading from Zulip < 1.9.0, which is no
longer possible because Zulip < 2.1.0 had no common supported
platforms with current main.
If we ever want this optimization for a future migration, it would be
better implemented using Django merge migrations.
Signed-off-by: Anders Kaseorg <anders@zulip.com>
The deferred_work events can't be processed in the test suite
environment, since it tries to make requests to the host <realm.uri>
which is "zulip.testserver" and obviously not going to work. Since the
test suite base data set has no animated emoji, there's nothing to do,
and we can skip this step.
This code only runs when applying the migration to an already
provisioned test db - because during an initial db set up there are no
realms yet, so no events get pushed by the migration.
Under the unicodedata distributed with Python 3.6, some Emoji are
classified as `Cn`, and not `So`:
```
$ unicode 1f929 --long
U+1F929 GRINNING FACE WITH STAR EYES
UTF-8: f0 9f a4 a9 UTF-16BE: d83edd29 Decimal: 🤩 Octal: \0374451
🤩
Category: So (Symbol, Other); East Asian width: W (wide)
Unicode block: 1F900..1F9FF; Supplemental Symbols and Pictographs
Bidi: ON (Other Neutrals)
$ python3.6 -c 'import unicodedata; print(unicodedata.category("\U0001f929"))'
Cn
$ python3.7 -c 'import unicodedata; print(unicodedata.category("\U0001f929"))'
So
```
Drop `Cn` from the list of excluded Unicode character classes, and
replace it with an explicit list of the 66 non-characters, which are
invariant.
Co-authored-by: Shlok Patel <shlokcpatel2001@gmail.com>
do_delete_users had two bugs:
1. Creating the replacement dummy users
with active=True
2. Creating the replacement dummy users with email domain set to
realm.uri, which may not be a valid email domain.
Prior commits fixed the bugs, and this migration fixes the pre-existing
objects.
While races here are unlikely, it is most correct to enforce this
invariant at the database layer, and having a database-level
constraint makes the models file a bit more readable.
Following b3c58f454f, we want to clean up
old topics that may contain the disallowed characters. The Message table
is large, so we go in batches, making sure we limit topic fetches and
UPDATE query to no more than BATCH_SIZE Message rows per query.
We restrict access of messages from web public streams if
anonymous login is disabled via `enable_spectator_access`.
Display of `Anonymous login` button is now controlled by
the value of `enable_spectator_access`.
Admins can toggle `enable_spectator_access` via org settings in UI.
I believe that this migration with the default of atomic=True will
fail when trying to convert the field to PositiveIntegerField if there
were any 0 values present in the database when the migration began.
The fix is to have each of the steps be their own transaction.
Add `escape_navigates_to_default_view` as a bool setting in
UserBaseSettings model and implement it as a checkbox that toggles
the hotkey implementation of escape to the default view in the
advanced user display settings.
With /help/ documentation edits from Alya Abbott.
Fixes#20043.
This commit adds related_name parameter to UserGroup.direct_members
such that we can use direct_groups instead of the default
usergroupmembership_set for getting all the groups of which the
user is direct member.
This commit also sets related_name of UserGroupMembership.user_group
and UserGroupMembership.user_profile to "+" which means that we will
not be having backward relations for these. This change is correct
since we would need to use the recursive queries to get all the
groups of a user and all the members of a group after we add the
subgroups concept in next commit. This leads to us using direct_members
field of UserGroup instead of usergroupmembership_set in mention code,
but this will soon be replaced with the recursive query function to
include subgroup's members as well.
Extracted this commit from #19866.
Authored-by : Anders Kaseorg <anders@zulip.com>
The previous commit apparently didn't have its migration attached properly.
Since this is just a reference to a ManyToManyField, this migration
doesn't actually modify the database, but it is needed for CI to pass.
This will be useful to let users enable/disable
sharing read receipts once we add that feature.
Note: Added "I've" to IGNORED_PHRASES in
tools/lib/capitalization.py to avoid capitalization
errors for the label text of this setting.
Note: These are not functional in enabling/disabling sending of
typing notifications with this commit.
Refactored the privacy settings update to keep the code less
duplicated along with making the addition of new settings easier.
This commit adds create_web_public_stream_policy
field to Realm table which controls the roles that
can create web-public streams and by default its
value is set to POLICY_OWNERS_ONLY.
Zulip attempts to validate that the regular expressions that admins
enter for linkifiers are well-formatted, and only contain a specific
subset of regex grammar. The process of checking these
properties (via a regex!) can cause denial-of-service via
backtracking.
Furthermore, this validation itself does not prevent the creation of
linkifiers which themselves cause denial-of-service when they are
executed. As the validator accepts literally anything inside of a
`(?P<word>...)` block, any quadratic backtracking expression can be
hidden therein.
Switch user-provided linkifier patterns to be matched in the Markdown
processor by the `re2` library, which is guaranteed constant-time.
This somewhat limits the possible features of the regular
expression (notably, look-head and -behind, and back-references);
however, these features had never been advertised as working in the
context of linkifiers.
A migration removes any existing linkifiers which would not function
under re2, after printing them for posterity during the upgrade; they
are unlikely to be common, and are impossible to fix automatically.
The denial-of-service in the linkifier validator was discovered by
@erik-krogh and @yoff, as GHSL-2021-118.
Users wanted a feature where they could specify
which users can create public streams and which users can
create private streams.
This splits stream creation code into two parts,
public and private stream creation.
Fixes#17009.
This commit replaces 'allow_message_deleting' boolean setting
with an integer setting 'delete_own_message_policy'. We have a
separate dropdown now for deciding which user-roles can delete
messages sent by themselves and the time-limit setting droddown
is different.
This new setting has two options - everyone and admins only. Other
options including moderators will be added further.
We also remove the "Never" option from the original time-limit
dropdown, as admins are always allowed to delete message. This
never option resembled the case of only admins being allowed to
delete but this state is now resembled by setting the dropdown
to "admins only" and we also disable the time-limit dropdown in
this case as admins are allowed to delete irrespective of limit.
Note, this setting is only for deleting messages sent by the
deleting user themselves, and only admins are allowed to delete
messages sent by others as before.
We make zero invalid value for message_content_delete_limit_seconds and
for handling the case of "Allow to delete message any time", the API-level
value of message_content_delete_limit_seconds is "anytime" and "None"
as the DB-level value. We also use these values for message retention
setting, so it helps maintain consistency.
This commit removes the existing default_twenty_four_hour_time field in
Realm table which was used to set the twenty_four_hour_time setting of
new user on joining and instead we now use the twenty_four_hour_time
field of RealmUserDefault table for the same.
With some tweaks by tabbott to clarify the documentation.
This is a follow-up to #19388.
We will in the future allow patch requests to change the visibility
of an existing topic, so `last_updated` is better name for this field.
This commit does not affect the API or events in any way, but only the
database.
Now, when we add a custom animated emoji to the realm
we also save a still image of it (1st frame of the gif). So
we can avoid showing an animated emoji every time.
Because we create all realms with do_create_user (including in the
test suite), we just need to change that function, add a migration for
existing realms, and ensure the data import code path correctly
creates these objects.
Note that the import code path will create a RealmUserDefault row with
default values if it is not present in the import data, which is
important for importing data from other tools like Slack.
This prevented migration 0345
(517c2ed39d / #19696) from applying on
systems that were created after the refactoring that resulted in the
system bot realm potentially having null as its name.
(We've already confirmed that normal realms, created via
`do_create_realm`, shouldn't be able to have this unusual state).
This was likely initiall created with null=True in
5c5ffd6ea3 just because we didn't have a
plan for backfilling this field, but I verified that Zulip Cloud has
no realms without a name set, and that's the place most likely to have
any form of super-legacy nameless realms.
So we can clean up this aspect of the data model without a special
migration to do something with existing realms with name=None (which I
suspect would have resulted in a 500 anyway).
The `user_activity_interval` worker calls:
```python3
last = UserActivityInterval.objects.filter(user_profile=user_profile).order_by("-end")[0]
`````
Which results in a query like:
```sql
SELECT "zerver_useractivityinterval"."id", "zerver_useractivityinterval"."user_profile_id", "zerver_useractivityinterval"."start", "zerver_useractivityinterval"."end" FROM "zerver_useractivityinterval" WHERE "zerver_useractivityinterval"."user_profile_id" = 12345 ORDER BY "zerver_useractivityinterval"."end" DESC LIMIT 1
```
For users which have at least one matching row, this results in a
query plan like:
```
Limit (cost=0.56..711.38 rows=1 width=24) (actual time=0.078..0.078 rows=1 loops=1)
-> Index Scan Backward using zerver_useractivityinterval_7f021a14 on zerver_useractivityinterval (cost=0.56..1031399.46 rows=1451 width=24) (actual time=0.077..0.078 rows=1 loops=1)
Filter: (user_profile_id = 12345)
Rows Removed by Filter: 98
Planning Time: 0.059 ms
Execution Time: 0.088 ms
```
But for users that have just been created, with no matching rows, this
is considerably more expensive:
```
Limit (cost=0.56..711.38 rows=1 width=24) (actual time=10798.146..10798.146 rows=0 loops=1)
-> Index Scan Backward using zerver_useractivityinterval_7f021a14 on zerver_useractivityinterval (cost=0.56..1031399.46 rows=1451 width=24) (actual time=10798.145..10798.145 rows=0 loops=1)
Filter: (user_profile_id = 12345)
Rows Removed by Filter: (count of every single row in the table, redacted)
Planning Time: 0.053 ms
Execution Time: 10798.158 ms
```
Regular vacuuming can force the use of the index on `user_profile_id`
as long as there are few enough users, which is fast -- however, at
some point, the query planner decides that is insufficiently specific,
always chooses the effective-whole-table-scan.
Add an index on `(user_profile_id, end)`, which is expected to be
sufficiently specific that it is used even with large numbers of user
profiles.
Ref #19250.
While it should be an invariant that message.rendered_content is never
None for a row saved to the database, it is possible for that
invariant to be violated, likely including due to bugs in previous
versions of data import/export tools.
While it'd be ideal for such messages to be rendered to fix the
invariant, it doesn't make sense for this has_link migration to crash
because of such a corrupted row, so we apply the similar policy we
already have for rendered_content="".
Part of #19272
We still keep refering to this model with "MutedTopic" to reduce the
diff size of this commit. The alias will be removed in the next commit.
This commit skips on renaming the `date_muted` field to something more
general. That will be done in further commits, along with the code and
API changes.
This commit replaces boolean field add_emoji_by_admins_only with an
integer field add_custom_emoji_policy as we would also add full members
and moderators option for this setting in further commits.
This field will control whether or not a user wants to sync their
drafts between different clients. Defaults to enabled.
Signed-off-by: Hemanth V. Alluri <hdrive1999@gmail.com>
This makes several changes:
* Fixes a bug where the help text explaining our policies was not displayed.
* No help text was defined for many organization types.
* Copy-edits the help text somewhat.
* Offers all of the organization type options.
* Removes the 100% coverage requirement because it's annoying to test
the e.currentTarget click handler.
This will be used to store the missedmessage events received
during the waiting time for email notifications (which is currently
2 minutes, hardcoded).
The change in `test_retention` is because we've set `on_delete=CASCADE`
for the message field this table.
The new query is like so:
```
DELETE FROM "zerver_missedmessageemailentry"
WHERE "zerver_missedmessageemailentry"."message_id" IN (
1545, 1546, 1547, 1548, 1549, 1550, 1551, 1552, 1553
)
```
We now validate the linkifier urls and patterns together, and add
the following additional checks:
1. All groups in the pattern must be used in the URL format string.
2. All groups in the URL format string must be declared in the pattern.
Linkifier pattern is now validated inside the `clean` method.
`filter_pattern_validator` is moved from `clean_fields` to `clean`
method as a safe check. As a result of this, a Puppeteer test case
is updated.
NOTE: The changes here are IN ADDITION to the existing validations.
Fixes#16482.
Co-authored-by: akshatdalton <akshat.dak@students.iiit.ac.in>
This commit replaces the allow_community_topic_editing boolean with
integer field edit_topic_policy and includes both frontend and
backend changes.
We also update settings_ui.disable_sub_settings_onchange to not
change the color of label as we did previously when the setting
was a checkbox. But now as the setting is dropdown we keep the
label as it is and we don't do anything with label when disabling
dropdowns. Also, this function was used only here so we can safely
change this.
Prakhar Pratyush
Zixuan Li
Mateusz Mandera
Alex Vandiver
Tim Abbott
Zixuan James Li
Joelute
Aman Agrawal
Sahil Batra
Anders Kaseorg
Abhijeet Prasad Bodas
evykassirer
Lauryn Menard
yogesh sirsat
Raghav Luthra
Kartik Srivastava
Zixuan James Li
byshen-dev
odunybrad
Lauryn Menard
Dinesh
Ganesh Pawar
sahil839
Riken Shah
Wesley Aptekar-Cassels
Eeshan Garg
Iam-VM
Hemanth V. Alluri
Rohitt Vashishtha
Sumanth V Rao
m-e-l-u-h-a-n
Vishnu KS