The default in the previous commit, inherited from camo, was to bind
to 0.0.0.0:9292. In standalone deployments, camo is deployed on the
same host as the nginx reverse proxy, and as such there is no need to
open it up to other IPs.
Make `zulip::camo` take an optional parameter, which allows overriding
it in puppet, but skips a `zulip.conf` setting for it, since it is
unlikely to be adjust by most users.
The upstream of the `camo` repository[1] has been unmaintained for
several years, and is now archived by the owner. Additionally, it has
a number of limitations:
- It is installed as a sysinit service, which does not run under
Docker
- It does not prevent access to internal IPs, like 127.0.0.1
- It does not respect standard `HTTP_proxy` environment variables,
making it unable to use Smokescreen to prevent the prior flaw
- It occasionally just crashes, and thus must have a cron job to
restart it.
Swap camo out for the drop-in replacement go-camo[2], which has the
same external API, requiring not changes to Django code, but is more
maintained. Additionally, it resolves all of the above complaints.
go-camo is not configured to use Smokescreen as a proxy, because its
own private-IP filtering prevents using a proxy which lies within that
IP space. It is also unclear if the addition of Smokescreen would
provide any additional protection over the existing IP address
restrictions in go-camo.
go-camo has a subset of the security headers that our nginx reverse
proxy sets, and which camo set; provide the missing headers with `-H`
to ensure that go-camo, if exposed from behind some other non-nginx
load-balancer, still provides the necessary security headers.
Fixes#18351 by moving to supervisor.
Fixeszulip/docker-zulip#298 also by moving to supervisor.
[1] https://github.com/atmos/camo
[2] https://github.com/cactus/go-camo
This is an additional security hardening step, to make Zulip default
to preventing SSRF attacks. The overhead of running Smokescreen is
minimal, and there is no reason to force deployments to take
additional steps in order to secure themselves against SSRF attacks.
Deployments which already have a different external proxy configured
will not gain a local Smokescreen installation, and running without
Smokescreen is supported by explicitly unsetting the `host` or `port`
values in `/etc/zulip/zulip.conf`.
In a subsequent commit, we intend to include it from
`zulip::app_frontend_base`, which is a layering violation if it only
exists in the form of a profile.
This will cause the output binary path to be sensitive to golang
version, causing it to be rebuilt on new golang, and an updated
supervisor config file written out, and thus supervisor also
restarted.
As with the previous commit for `/srv/golang`, we have the custom of
namespacing things under `/srv` with `zulip-` to help ensure that we
play nice with anything else that happens to be on the host.
We have the custom of namespacing things under `/srv` with `zulip-`
to help ensure that we play nice with anything else that happens
to be on the host.
It is possible to be in recovery, and downloading WAL logs from
archives, and not yet be replicating. If one only checks the
streaming log status, it reports as "no replicas" which is technically
accurate but not a useful summation of the state of the replica.
The `cron` resource places its contents in the user's crontab, which
makes it unlike every other cron job that Zulip installs.
Switch to using `/etc/cron.d` files, like all other cron jobs.
TOR users are legitimate users of the system; however, that system can
also be used for abuse -- specifically, by evading IP-based
rate-limiting.
For the purposes of IP-based rate-limiting, add a
RATE_LIMIT_TOR_TOGETHER flag, defaulting to false, which lumps all
requests from TOR exit nodes into the same bucket. This may allow a
TOR user to deny other TOR users access to the find-my-account and
new-realm endpoints, but this is a low cost for cutting off a
significant potential abuse vector.
If enabled, the list of TOR exit nodes is fetched from their public
endpoint once per hour, via a cron job, and cached on disk. Django
processes load this data from disk, and cache it in memcached.
Requests are spared from the burden of checking disk on failure via a
circuitbreaker, which trips of there are two failures in a row, and
only begins trying again after 10 minutes.
Since Supervisor 4, which is installed on Ubuntu 20.04 and Debian 11,
`supervisorctl status` returns exit code 3 if any of the
supervisor-controlled processes are not running.
Using `supervisorctl status` as the Puppet `status` command for
Supervisor leads to unnecessarily trying to "start" a Supervisor
process which is already started, but happens to have one or more of
its managed processes stopped. This is an unnecessary no-op in
production environments, but in docker-init enviroments, such as in
CI, attempting to start the process a second time is an error.
Switch to checking if supervisor is running by way of sysv init. This
fixes the potential error in CI, as well as eliminates unnecessary
"starts" of supervisor when it was already running -- a situation
which made zulip-puppet-apply not idempotent:
```
root@alexmv-prod:~# supervisorctl status
process-fts-updates STOPPED Nov 10 12:33 AM
smokescreen RUNNING pid 1287280, uptime 0:35:32
zulip-django STOPPED Nov 10 12:33 AM
zulip-tornado STOPPED Nov 10 12:33 AM
[...]
root@alexmv-prod:~# ~zulip/deployments/current/scripts/zulip-puppet-apply --force
Notice: Compiled catalog for alexmv-prod.zulipdev.org in environment production in 2.32 seconds
Notice: /Stage[main]/Zulip::Supervisor/Service[supervisor]/ensure: ensure changed 'stopped' to 'running'
Notice: Applied catalog in 0.91 seconds
root@alexmv-prod:~# ~zulip/deployments/current/scripts/zulip-puppet-apply --force
Notice: Compiled catalog for alexmv-prod.zulipdev.org in environment production in 2.35 seconds
Notice: /Stage[main]/Zulip::Supervisor/Service[supervisor]/ensure: ensure changed 'stopped' to 'running'
Notice: Applied catalog in 0.92 seconds
```
In the series of migrations to this tool's configuration to support
specifying an arbitrary database name
(e.g. c17f502bb0), we broke support for
running process_fts_updates on the application server, connected to a
remote database server. That workflow is used by docker-zulip and
presumably other settings like Amazon RDS.
The fix is to import the Zulip virtualenv (if available) when running
on an application server. This is better than just supporting this
case, since both docker-zulip and an Amazon RDS database are setting
where it would be inconvenient to run process-fts-updates directly on
the database server. (In the former case, because we want to avoid
having a strong version dependency on the postgres container).
Details are available in this conversation:
https://chat.zulip.org/#narrow/stream/49-development-help/topic/Logic.20in.20process_fts_updates.20seems.20to.20be.20broken/near/1251894
Thanks to Erik Tews for reporting and help in debugging this issue.
We previously used `zulip-puppet-apply` with a custom config file,
with an updated PostgreSQL version but more limited set of
`puppet_classes`, to pre-create the basic settings for the new cluster
before running `pg_upgradecluster`.
Unfortunately, the supervisor config uses `purge => true` to remove
all SUPERVISOR configuration files that are not included in the puppet
configuration; this leads to it removing all other supervisor
processes during the upgrade, only to add them back and start them
during the second `zulip-puppet-apply`.
It also leads to `process-fts-updates` not being started after the
upgrade completes; this is the one supervisor config file which was
not removed and re-added, and thus the one that is not re-started due
to having been re-added. This was not detected in CI because CI added
a `start-server` command which was not in the upgrade documentation.
Set a custom facter fact that prevents the `purge` behaviour of the
supervisor configuration. We want to preserve that behaviour in
general, and using `zulip-puppet-apply` continues to be the best way
to pre-set-up the PostgreSQL configuration -- but we wish to avoid
that behaviour when we know we are applying a subset of the puppet
classes.
Since supervisor configs are no longer removed and re-added, this
requires an explicit start-server step in the instructions after the
upgrades complete. This brings the documentation into alignment with
what CI is testing.
These checks suffer from a couple notable problems:
- They are only enabled on staging hosts -- where they should never
be run. Since ef6d0ec5ca, these supervisor processes are only
run on one host, and never on the staging host.
- They run as the `nagios` user, which does not have appropriate
permissions, and thus the checks always fail. Specifically,
`nagios` does not have permissions to run `supervisorctl`, since
the socket is owned by the `zulip` user, and mode 0700; and the
`nagios` user does not have permission to access Zulip secrets to
run `./manage.py print_email_delivery_backlog`.
Rather than rewrite these checks to run on a cron as zulip, and check
those file contents as the nagios user, drop these checks -- they can
be rewritten at a later point, or replaced with Prometheus alerting,
and currently serve only to cause always-failing Nagios checks, which
normalizes alert failures.
Leave the files installed if they currently exist, rather than
cluttering puppet with `ensure => absent`; they do no harm if they are
left installed.
In an initial install, the following is a potential rule ordering:
```
Notice: /Stage[main]/Zulip::Supervisor/File[/etc/supervisor/conf.d/zulip]/ensure: created
Notice: /Stage[main]/Zulip::Supervisor/File[/etc/supervisor/supervisord.conf]/content: content changed '{md5}99dc7e8a1178ede9ae9794aaecbca436' to '{md5}7ef9771d2c476c246a3ebd95fab784cb'
Notice: /Stage[main]/Zulip::Supervisor/Exec[supervisor-restart]: Triggered 'refresh' from 1 event
[...]
Notice: /Stage[main]/Zulip::App_frontend_base/File[/etc/supervisor/conf.d/zulip/zulip.conf]/ensure: defined content as '{md5}d98ac8a974d44efb1d1bb2ef8b9c3dee'
[...]
Notice: /Stage[main]/Zulip::App_frontend_once/File[/etc/supervisor/conf.d/zulip/zulip-once.conf]/ensure: defined content as '{md5}53f56ae4b95413bfd7a117e3113082dc'
[...]
Notice: /Stage[main]/Zulip::Process_fts_updates/File[/etc/supervisor/conf.d/zulip/zulip_db.conf]/ensure: defined content as '{md5}96092d7f27d76f48178a53b51f80b0f0'
Notice: /Stage[main]/Zulip::Supervisor/Service[supervisor]/ensure: ensure changed 'stopped' to 'running'
```
The last line is misleading -- supervisor was already started by the
`supervisor-restart` process on the third line. As can be shown with
`zulip-puppet-apply --debug`, the last line just installs supervisor
to run on startup, using `systemctl`:
```
Debug: Executing: 'supervisorctl status'
Debug: Executing: '/usr/bin/systemctl unmask supervisor'
Debug: Executing: '/usr/bin/systemctl start supervisor'
```
This means the list of processes started by supervisor depends
entirely on which configuration files were successfully written out by
puppet before the initial `supervisor-restart` ran. Since
`zulip_db.conf` is written later than the rest, the initial install
often fails to start the `process-fts-updates` process. In this
state, an explicit `supervisorctl restart` or `supervisorctl reread &&
supervisorctl update` is required for the service to be found and
started.
Reorder the `supervisor-restart` exec to only run after the service is
started. Because all supervisor configuration files have a `notify`
of the service, this forces the ordering of:
```
(package) -> (config files) -> (service) -> (optional restart)
```
On first startup, this will start and them immediately restart
supervisor, which is unfortunate but unavoidable -- and not terribly
relevant, since the database will not have been created yet, and thus
most processes will be in a restart loop for failing to connect to it.
The sysvinit script for supervisor has a long-standing bug where
`/etc/init.d/supervisor restart` stops but does not then start the
supervisor process.
Work around this by making restart then try to start, and return if it
is currently running.
Not having the package installed will cause startup failures in
`process_fts_updates`; ensure that we've installed the package before
we potentially start the service.
93f62b999e removed the last file in
puppet/zulip/files/nagios_plugins/zulip_nagios_server, which means the
singular rule in zulip::nagios no longer applies cleanly.
Remove the `zulip::nagios` class, as it is no longer needed.
An organization with at most 5 users that is behind on payments isn't
worth spending time on investigating the situation.
For larger organizations, we likely want somewhat different logic that
at least does not void invoices.
Alex Vandiver
Anders Kaseorg
Adam Benesh
Tim Abbott
Mateusz Mandera
Vishnu KS